|
| Расположение в меню |
|---|
| FEM → Constraint contact |
| Верстаки |
| FEM |
| Быстрые клавиши |
| См. также |
| FEM tutorial |
Description
Creates a FEM constraint for contact between 2 surfaces.
How to use
- Click on
or choose Model → Mechanical Constraints → Constraint contact from the top menu. - Select the master face.
- Select the slave face.
- Enter a contact stiffness.
- Enter a friction coefficient.
Limitations
- The contact constraint can only be applied to two faces.
Notes
- The contact stiffness should be 10 times the young's modulus of the material for hard contact. The higher the value for contact stiffness, the harder the contact between surfaces.
- The slave face is the face which penetrates into the master face, and therefore experiences more deformation.
- The *CONTACT PAIR card is used for modeling contact in CalculiX. The constraint uses Face-to-Face penalty contact and the contact formulation is explained in detail at http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node112.html