|
| Description |
|---|
| This macro is a complete application, it allows to fill the cartridge of the drawing sheet with full editabletext. |
| Author |
| Mario52 |
| Links |
| Makro návody How to install macros How to customize toolbars |
| Version |
| 00.09 |
| Date last modification |
| 2017-02-15 |
Contents |
This macro is a complete application, it allows to fill simply all the fields of the cartridge
Choice in the page Misc_templates_Full
Here the order of filling in the line FreeCAD texteditable. The date and time fields are separated by a "space negative space" " - " and constitute a single line textedit.
Use
PS: Some characters such as & $ are not accepted (and possibly other special characters).
If you have any questions or want to add a function, you can address you on the french forum Remplir cartouche
- The window remains above other Windows, thereby controlling the cartridge without leaving the program.
- Copy the code into a file named Macro_CartoucheFC_Full.FCMacro and place it in your usual macros directory.
- After you have created your drawing sheet using the Drawing of FreeCAD module, run the macro Macro_CartoucheFC_Full.
- At the opening, the program will register in memory all data already present in the cartridge of the sheet (if they are filled), all these data will be automatically returned to using the button Memo and kept in memory until the closure of the programme.
- First select your page to work
- Date button D. and time H. displayed the date and time of the system.
- The date format depends on the selected symbol EU or US which determines the regional format. Change does not happen automatically (for the case or you have entered a date manually) you must again click buttons dates if you change the symbol (check before printing).
- Choice your format page
- Button Symbole EU or US change the meaning of the symbol of projection "Select your Symbol" is displayed by default, and then the active symbol appears. Click on the button and check the leaf symbol, click a second time to modify the symbol.
- The choice of this symbol, affects the date format EU = dd/MM/yyyy and US = MM/dd/yyyy.
- Attention: this command does not pass through the button Apply and immediately changes the symbol to each presses on the key, always check if you have the appropriate symbol on your worksheet.
- Button Clean Clears all fields in the cartridge. You can revert to the original data using the button Memo.
- Button Apply saves all fields of the cartridge in the sheet. You can revert to the original data using the button Memo (except for the regional symbol that works in independent and is effective immediately).
Code
The icon for you toolBar 
Macro_CartoucheFC_Full.FCMacro
# -*- coding: utf-8 -*-
from __future__ import unicode_literals
"""
***************************************************************************
* Copyright (c) 2014 2016 2017 <mario52> *
* *
* This file is a supplement to the FreeCAD CAx development system. *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU Lesser General Public License (LGPL) *
* as published by the Free Software Foundation; either version 2 of *
* the License, or (at your option) any later version. *
* for detail see the LICENCE text file. *
* *
* This software is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU Library General Public License for more details. *
* *
* You should have received a copy of the GNU Library General Public *
* License along with this macro; if not, write to the Free Software *
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 *
* USA *
***************************************************************************
* WARNING! All changes in this file will be lost and *
* may cause malfunction of the program *
***************************************************************************
"""
#OS: Windows 10
#Word size of OS: 64-bit
#Word size of FreeCAD: 64-bit
#Version: 0.16.6706 (Git)
#Build type: Release
#Branch: releases/FreeCAD-0-16
#Hash: f86a4e411ff7848dea98d7242f43b7774bee8fa0
#Python version: 2.7.8
#Qt version: 4.8.7
#Coin version: 4.0.0a
#OCC version: 6.8.0.oce-0.17
__title__ = "Macro_CartoucheFC_Full"
__author__ = "Mario52"
__url__ = "http://www.freecadweb.org/index-fr.html"
__Wiki__ = "http://www.freecadweb.org/wiki/Macro_CartoucheFC_Full"
__version__ = "00.10"
__date__ = "15/02/2017"
__Requires__ = ("all version and freecad " +
" DESIGNED_BY, CREATION_DATE, CHECKED_BY, CHECK_DATE, SIZE, SCALE, WEIGHT, DRAWING_NUMBER, SHEET, " +
" TITLE, DESCRIPTION, COMPANY, COPYRIGHT, Note_A, Note_B, Note_C, Note_D, Note_E, Note_F, Note_G, Note_H, Note_I" )
__Template__ = " A3_Landscape_xx_FULL.svg, A3_Portrait_xx_FULL, A4_Landscape_xx_FULL.svg, A4_Portrait_xx_FULL"
__Template_Link__ = "http://www.freecadweb.org/wiki/index.php?title=Misc_templates_Full"
import PySide
from PySide import QtCore, QtGui
import Draft, Part, FreeCAD, math, PartGui, FreeCADGui
from math import sqrt, pi, sin, cos, asin
from FreeCAD import Base
def utf8(unio):
return unicode(unio).encode('UTF8')
global path
#path = FreeCAD.ConfigGet("AppHomePath")
path = FreeCAD.ConfigGet("UserAppData")
global PageActive ; PageActive = "Select your page" # essais
#global PageActive ; PageActive = "Page" # page active
global DESIGNED_BY ; DESIGNED_BY = "" # lineEdit01 DESIGNED_BY
global MDESIGNED_BY ; MDESIGNED_BY = "" #
global CREATION_DATE ; CREATION_DATE = "" # lineEdit02 CREATION_DATE date
global MCREATION_DATE ; MCREATION_DATE = "" #
global CREA_DATE ; CREA_DATE = "" # lineEdit02h date
global MCREA_DATE ; MCREA_DATE = "" #
global CREA_TIME ; CREA_TIME = "" # lineEdit02h heure
global MCREA_TIME ; MCREA_TIME = "" #
global CHECKED_BY ; CHECKED_BY = "" # lineEdit03
global MCHECKED_BY ; MCHECKED_BY = "" #
global CHECK_DATE ; CHECK_DATE = "" # lineEdit04 date
global MCHECK_DATE ; MCHECK_DATE = "" #
global CHEC_DATE ; CHEC_DATE = "" # lineEdit04 date
global MCHEC_DATE ; MCHEC_DATE = "" #
global CHEC_TIME ; CHEC_TIME = "" # lineEdit04h heure
global MCHEC_TIME ; MCHEC_TIME = "" #
global SIZE ; SIZE = "" # lineEdit05
global MSIZE ; MSIZE = "" #
global SCALE ; SCALE = "" # lineEdit06
global MSCALE ; MSCALE = "" #
global WEIGHT ; WEIGHT = "" # lineEdit07
global MWEIGHT ; MWEIGHT = "" #
global DRAWING_NUMBER ; DRAWING_NUMBER = "" # lineEdit08
global MDRAWING_NUMBER ; MDRAWING_NUMBER = "" #
global SHEET ; SHEET = "" # lineEdit09
global MSHEET ; MSHEET = "" #
global TITLE ; TITLE = "" # textEdit_01
global MTITLE ; MTITLE = "" #
global DESCRIPTION ; DESCRIPTION = "" # textEdit_02
global MDESCRIPTION ; MDESCRIPTION = "" #
global COMPANY ; COMPANY = "" # textEdit_02b
global MCOMPANY ; MCOMPANY = "" #
global COPYRIGHT ; COPYRIGHT = "" # lineEdit_20
global MCOPYRIGHT ; MCOPYRIGHT = "" #
global Note_A ; Note_A = "" # lineEdit_10
global MNote_A ; MNote_A = "" #
global Note_B ; Note_B = "" # lineEdit_11
global MNote_B ; MNote_B = "" #
global Note_C ; Note_C = "" # lineEdit_12
global MNote_C ; MNote_C = "" #
global Note_D ; Note_D = "" # lineEdit_13
global MNote_D ; MNote_D = "" #
global Note_E ; Note_E = "" # lineEdit_14
global MNote_E ; MNote_E = "" #
global Note_F ; Note_F = "" # lineEdit_15
global MNote_F ; MNote_F = "" #
global Note_G ; Note_G = "" # lineEdit_16
global MNote_G ; MNote_G = "" #
global Note_H ; Note_H = "" # lineEdit_17
global MNote_H ; MNote_H = "" #
global Note_I ; Note_I = "" # lineEdit_18
global MNote_I ; MNote_I = "" #
global SymbolSwitch ; SymbolSwitch = 1 # 0=US 1=EU
global ui ; ui = ""
def heure():
return QtCore.QTime().currentTime().toString('hh:mm:ss')
def dateEu():
return QtCore.QDate().currentDate().toString('dd/MM/yyyy') # forme euro
def dateUK():
return QtCore.QDate().currentDate().toString('yyyy/MM/dd') # forme UK
def dateUs():
return QtCore.QDate().currentDate().toString('MM/dd/yyyy') # forme US
def dateComp():
return QtCore.QDate().currentDate().toString('dddd d MMMM yyyy') # Retourne "dimanche 20 Juillet 77"
try:
_fromUtf8 = QtCore.QString.fromUtf8
except AttributeError:
def _fromUtf8(s):
return s
try:
_encoding = QtGui.QApplication.UnicodeUTF8
def _translate(context, text, disambig):
return QtGui.QApplication.translate(context, text, disambig, _encoding)
except AttributeError:
def _translate(context, text, disambig):
return QtGui.QApplication.translate(context, text, disambig)
def errorDialog(msg):
diag = QtGui.QMessageBox(QtGui.QMessageBox.Critical,u"Error Message",msg)
diag.setWindowFlags(PySide.QtCore.Qt.WindowStaysOnTopHint) # cette fonction met la fenetre en avant
diag.exec_()
def symbol_EU(depx, depy, scale): #symbol_EU =O
global PageActive
global ui
try:
page = App.activeDocument().getObjectsByLabel(PageActive.encode('utf-8'))[0]
except Exception:
page = App.activeDocument().getObjectsByLabel(PageActive)[0]
if len(str(page)) != 2:
comP = []
nameL = []
if "Page" in (page.Name):
for ii in (page.Group):
if ((ii.Label) == "Symbol_EU") or ((ii.Label) == "Symbol_US") :
App.activeDocument().removeObject(ii.Name)
points=[FreeCAD.Vector(-7.5,0.0,0.0),FreeCAD.Vector(20.0,0.0,0.0)]
i = Draft.makeWire(points,closed=False,face=False,support=None)
comP.append(i.Shape)
nameL.append(i.Name)
points=[FreeCAD.Vector(12.5,7.5,0.0),FreeCAD.Vector(12.5,-7.5,0.0)]
i = Draft.makeWire(points,closed=False,face=False,support=None)
comP.append(i.Shape)
nameL.append(i.Name)
points=[FreeCAD.Vector(-5,2.5,0.0),FreeCAD.Vector(5.0,5.0,0.0),FreeCAD.Vector(5.0,-5.0,0.0),FreeCAD.Vector(-5.0,-2.5,0.0)]
i = Draft.makeWire(points,closed=True,face=False,support=None)
comP.append(i.Shape)
nameL.append(i.Name)
pl=FreeCAD.Placement()
pl.Rotation.Q=(0.0,-0.0,-0.0,1.0)
pl.Base=FreeCAD.Vector(12.5,-0.0,0.0)
i = Draft.makeCircle(radius=2.5,placement=pl,face=False,support=None)
comP.append(i.Shape)
nameL.append(i.Name)
i = Draft.makeCircle(radius=5.0,placement=pl,face=False,support=None)
comP.append(i.Shape)
nameL.append(i.Name)
comp = Part.makeCompound(comP)
Part.show(comp)
App.ActiveDocument.ActiveObject.Label = "Symbol_EU"
obj = FreeCAD.ActiveDocument.ActiveObject
obj.ViewObject.LineColor = (0.0,0.0,0.0)
obj.ViewObject.Visibility = False
obj2 = Draft.makeDrawingView(obj, page)
obj2.X = depx
obj2.Y = depy
obj2.Scale = scale #0.8 # A3
obj2.Label = "Symbol_EU"
for i in nameL: App.activeDocument().removeObject(i)
App.activeDocument().getObjectsByLabel(PageActive.encode('utf-8'))[0].addObject(obj)
App.activeDocument().getObjectsByLabel(PageActive.encode('utf-8'))[0].addObject(obj2)
App.ActiveDocument.recompute()
else:
ui.pushButton05.setStyleSheet("background-color: red") # This function gives a color button
FreeCAD.Console.PrintError("Error selected page [ " + PageActive + " ]" + "\n")
def symbol_US(depx, depy, scale): #symbol_US O=
global PageActive
global ui
try:
page = App.activeDocument().getObjectsByLabel(PageActive.encode('utf-8'))[0]
except Exception:
page = App.activeDocument().getObjectsByLabel(PageActive)[0]
if len(str(page)) != 2:
comP = []
nameL = []
if "Page" in (page.Name):
for ii in (page.Group):
if ((ii.Label) == "Symbol_EU") or ((ii.Label) == "Symbol_US") :
App.activeDocument().removeObject(ii.Name)
points=[FreeCAD.Vector(-7.5,0.0,0.0),FreeCAD.Vector(20.0,0.0,0.0)]
i = Draft.makeWire(points,closed=False,face=False,support=None)
comP.append(i.Shape)
nameL.append(i.Name)
points=[FreeCAD.Vector(0.0,7.5,0.0),FreeCAD.Vector(0.0,-7.5,0.0)]
i = Draft.makeWire(points,closed=False,face=False,support=None)
comP.append(i.Shape)
nameL.append(i.Name)
points=[FreeCAD.Vector(7.5,2.5,0.0),FreeCAD.Vector(17.5,5.0,0.0),FreeCAD.Vector(17.5,-5.0,0.0),FreeCAD.Vector(7.5,-2.5,0.0)]
i = Draft.makeWire(points,closed=True,face=False,support=None)
comP.append(i.Shape)
nameL.append(i.Name)
pl=FreeCAD.Placement()
pl.Rotation.Q=(0.0,-0.0,-0.0,1.0)
pl.Base=FreeCAD.Vector(0.0,-0.0,0.0)
i = Draft.makeCircle(radius=2.5,placement=pl,face=False,support=None)
comP.append(i.Shape)
nameL.append(i.Name)
i = Draft.makeCircle(radius=5.0,placement=pl,face=False,support=None)
comP.append(i.Shape)
nameL.append(i.Name)
comp = Part.makeCompound(comP)
Part.show(comp)
App.ActiveDocument.ActiveObject.Label = "Symbol_US"
obj = FreeCAD.ActiveDocument.ActiveObject
obj.ViewObject.LineColor = (0.0,0.0,0.0)
obj.ViewObject.Visibility = False
obj2 = Draft.makeDrawingView(obj, page)
obj2.X = depx
obj2.Y = depy
obj2.Scale = scale #0.8 # A3
obj2.Label = "Symbol_US"
for i in nameL: App.activeDocument().removeObject(i)
App.activeDocument().getObjectsByLabel(PageActive.encode('utf-8'))[0].addObject(obj)
App.activeDocument().getObjectsByLabel(PageActive.encode('utf-8'))[0].addObject(obj2)
App.ActiveDocument.recompute()
else:
ui.pushButton05.setStyleSheet("background-color: red") # This function gives a color button
FreeCAD.Console.PrintError("Error selected page [ " + PageActive + " ]" + "\n")
def memoEntree():
global MDESIGNED_BY, MCREATION_DATE, MCREA_DATE , MCREA_TIME, MCHECKED_BY, MCHECK_DATE
global MCHEC_DATE , MCHEC_TIME , MSIZE , MSCALE , MWEIGHT ,MDRAWING_NUMBER
global MSHEET , MTITLE , MDESCRIPTION, MCOMPANY , MCOPYRIGHT
global MNote_A, MNote_B, MNote_C, MNote_D, MNote_E, MNote_F, MNote_G, MNote_H, MNote_I
global PageActive
try:
page = App.activeDocument().getObjectsByLabel(PageActive.encode('utf-8'))[0].Name
except Exception:
page = App.activeDocument().getObjectsByLabel(PageActive)[0]
try:
MDESIGNED_BY = App.activeDocument().getObject(page).EditableTexts[0] # lineEdit01 DESIGNED_BY
MCREATION_DATE = App.activeDocument().getObject(page).EditableTexts[1] # lineEdit02 CREATION_DATE date
MCREA_DATE = MCREA_TIME = MCHEC_DATE = MCHEC_TIME = ""
try:
MCREA_DATE = MCREATION_DATE.split(" - ")[0] # lineEdit02h date
except:
MCREA_DATE = MCREATION_DATE
try:
MCREA_TIME = MCREATION_DATE.split(" - ")[1] # lineEdit02h heure
except: None
MCHECKED_BY = App.activeDocument().getObject(page).EditableTexts[2] # lineEdit03
MCHECK_DATE = App.activeDocument().getObject(page).EditableTexts[3] # lineEdit04 date
try:
MCHEC_DATE = MCHECK_DATE.split(" - ")[0] # lineEdit04 date
except:
MCHEC_DATE = MCHECK_DATE
try:
MCHEC_TIME = MCHECK_DATE.split(" - ")[1] # lineEdit04h heure
except: None
MSIZE = App.activeDocument().getObject(page).EditableTexts[4] # lineEdit05
MSCALE = App.activeDocument().getObject(page).EditableTexts[5] # lineEdit06
MWEIGHT = App.activeDocument().getObject(page).EditableTexts[6] # lineEdit07
MDRAWING_NUMBER = App.activeDocument().getObject(page).EditableTexts[7] # lineEdit08
MSHEET = App.activeDocument().getObject(page).EditableTexts[8] # lineEdit09
MTITLE = App.activeDocument().getObject(page).EditableTexts[9] # textEdit_01
try:
MDESCRIPTION = App.activeDocument().getObject(page).EditableTexts[10] # textEdit_02
MCOMPANY = App.activeDocument().getObject(page).EditableTexts[11] # textEdit_02b
MCOPYRIGHT = App.activeDocument().getObject(page).EditableTexts[12] # lineEdit_20
MNote_A = App.activeDocument().getObject(page).EditableTexts[13] # lineEdit_10
MNote_B = App.activeDocument().getObject(page).EditableTexts[14] # lineEdit_11
MNote_C = App.activeDocument().getObject(page).EditableTexts[15] # lineEdit_12
MNote_D = App.activeDocument().getObject(page).EditableTexts[16] # lineEdit_13
MNote_E = App.activeDocument().getObject(page).EditableTexts[17] # lineEdit_14
MNote_F = App.activeDocument().getObject(page).EditableTexts[18] # lineEdit_15
MNote_G = App.activeDocument().getObject(page).EditableTexts[19] # lineEdit_16
MNote_H = App.activeDocument().getObject(page).EditableTexts[20] # lineEdit_17
MNote_I = App.activeDocument().getObject(page).EditableTexts[21] # lineEdit_18
except Exception:
App.Console.PrintError("Erreur cartouche level DESCRIPTION (Missing field)"+"\n"
"You may be using an inadequate template. Try with this template"+"\n")
App.Console.PrintMessage("http://www.freecadweb.org/wiki/index.php?title=Misc_templates_Full"+"\n\n")
App.Console.PrintError("Or for the original FreeCAD template use this macro"+"\n")
App.Console.PrintMessage("http://www.freecadweb.org/wiki/index.php?title=Macro_CartoucheFC"+"\n")
errorDialog("Erreur cartouche level DESCRIPTION (Missing field)"+"\n"
"You may be using an inadequate template. Try with this template"+"\n"
"http://www.freecadweb.org/wiki/index.php?title=Misc_templates_Full"+"\n\n"
"Or for the original FreeCAD template use this macro"+"\n"
"http://www.freecadweb.org/wiki/index.php?title=Macro_CartoucheFC"+"\n\n")
except:
errorDialog("Erreur cartouche")
class Ui_MainWindow(object):
def __init__(self, MainWindow):
global path
global PageActive
self.window = MainWindow
MainWindow.setObjectName(_fromUtf8("MainWindow"))
MainWindow.resize(810, 400)
MainWindow.setMaximumSize(QtCore.QSize(810, 400))
self.centralWidget = QtGui.QWidget(MainWindow)
self.centralWidget.setObjectName(_fromUtf8("centralWidget"))
# self.pushButton01 = QtGui.QPushButton(self.centralWidget)
# self.pushButton01.setGeometry(QtCore.QRect(115, 360, 93, 28))
# self.pushButton01.setObjectName(_fromUtf8("pushButton01"))
# self.pushButton01.clicked.connect(self.on_pushButton01_clicked) #connection pushButton01
self.pushButton02 = QtGui.QPushButton(self.centralWidget)
self.pushButton02.setGeometry(QtCore.QRect(225, 360, 93, 28))
self.pushButton02.setObjectName(_fromUtf8("pushButton02"))
self.pushButton02.clicked.connect(self.on_pushButton02_clicked) #connection pushButton02
self.pushButton03 = QtGui.QPushButton(self.centralWidget)
self.pushButton03.setGeometry(QtCore.QRect(335, 360, 93, 28))
self.pushButton03.setToolTip("The memo button work only with the first Page")
self.pushButton03.setObjectName(_fromUtf8("pushButton03"))
self.pushButton03.clicked.connect(self.on_pushButton03_clicked) #connection pushButton03
self.pushButton04 = QtGui.QPushButton(self.centralWidget)
self.pushButton04.setGeometry(QtCore.QRect(445, 360, 93, 28))
self.pushButton04.setObjectName(_fromUtf8("pushButton04"))
self.pushButton04.clicked.connect(self.on_pushButton04_clicked) #connection pushButton04
self.pushButton05 = QtGui.QPushButton(self.centralWidget)
self.pushButton05.setGeometry(QtCore.QRect(555, 360, 93, 28))
# self.pushButton05.setStyleSheet("background-color: red") # This function gives a color button
self.pushButton05.setObjectName(_fromUtf8("pushButton05"))
self.pushButton05.clicked.connect(self.on_pushButton05_clicked) #connection pushButton05
#####
self.groupBox = QtGui.QGroupBox(self.centralWidget)
self.groupBox.setGeometry(QtCore.QRect(20, 159, 190, 101))
self.groupBox.setObjectName(_fromUtf8("groupBox"))
self.label_20 = QtGui.QLabel(self.groupBox)
self.label_20.setGeometry(QtCore.QRect(115, 5, 61, 17))
self.label_20.setObjectName(_fromUtf8("label_20"))
############### font and color Label
font = QtGui.QFont()
font.setBold(True)
self.label_20.setFont(font)
self.label_20.setStyleSheet("color : #ff0000")
############### font and color
self.label_20.setVisible(False)
self.radioButton_0 = QtGui.QRadioButton(self.groupBox)
self.radioButton_0.setGeometry(QtCore.QRect(95, 1, 91, 17))
self.radioButton_0.setChecked(True)
self.radioButton_0.setEnabled(False)
self.radioButton_0.setVisible(False)
self.radioButton_0.setObjectName(_fromUtf8("radioButton_0"))
self.radioButton_1 = QtGui.QRadioButton(self.groupBox)
self.radioButton_1.setGeometry(QtCore.QRect(95, 20, 91, 17))
self.radioButton_1.setObjectName(_fromUtf8("radioButton_1"))
self.radioButton_1.clicked.connect(self.on_radioButton_A3_clicked)# connect radioButton_A3
self.radioButton_2 = QtGui.QRadioButton(self.groupBox)
self.radioButton_2.setGeometry(QtCore.QRect(95, 39, 91, 17))
self.radioButton_2.setObjectName(_fromUtf8("radioButton_2"))
self.radioButton_2.clicked.connect(self.on_radioButton_A3_clicked)# connect radioButton_A3
self.radioButton_3 = QtGui.QRadioButton(self.groupBox)
self.radioButton_3.setGeometry(QtCore.QRect(95, 58, 91, 17))
self.radioButton_3.setObjectName(_fromUtf8("radioButton_3"))
self.radioButton_3.clicked.connect(self.on_radioButton_A4_clicked)# connect radioButton_A4
self.radioButton_4 = QtGui.QRadioButton(self.groupBox)
self.radioButton_4.setGeometry(QtCore.QRect(95, 76, 91, 17))
self.radioButton_4.setObjectName(_fromUtf8("radioButton_4"))
self.radioButton_4.clicked.connect(self.on_radioButton_A4_clicked)# connect radioButton_A4
self.lineEdit_05 = QtGui.QLineEdit(self.groupBox)
self.lineEdit_05.setGeometry(QtCore.QRect(10, 16, 75, 41))
font = QtGui.QFont()
font.setPointSize(25)
font.setBold(False)
font.setWeight(50)
self.lineEdit_05.setFont(font)
self.lineEdit_05.setAlignment(QtCore.Qt.AlignCenter)
self.lineEdit_05.setObjectName(_fromUtf8("lineEdit_05"))
self.lineEdit_05.setText(SIZE)
self.frame = QtGui.QFrame(self.groupBox)
self.frame.setGeometry(QtCore.QRect(10, 58, 74, 41))
self.frame.setFrameShape(QtGui.QFrame.StyledPanel)
self.frame.setFrameShadow(QtGui.QFrame.Raised)
self.frame.setObjectName(_fromUtf8("frame"))
self.radioButton_EU = QtGui.QRadioButton(self.frame)
self.radioButton_EU.setGeometry(QtCore.QRect(0, 1, 41, 17))
self.radioButton_EU.setChecked(True)
self.radioButton_EU.setObjectName(_fromUtf8("radioButton_EU"))
self.radioButton_EU.clicked.connect(self.on_radioButton_EU_clicked) #connection radioButton_EU
self.radioButton_US = QtGui.QRadioButton(self.frame)
self.radioButton_US.setGeometry(QtCore.QRect(37, 1, 41, 17))
self.radioButton_US.setObjectName(_fromUtf8("radioButton_US"))
self.radioButton_US.clicked.connect(self.on_radioButton_US_clicked) #connection radioButton_US
self.pushButton10 = QtGui.QPushButton(self.frame)
self.pushButton10.setGeometry(QtCore.QRect(0, 18, 75, 23))
self.pushButton10.setToolTip("Create the symbol EU or US"+"\n"
"This button is Independent of the Write button"+"\n"
"If you desire modify the symbol in the cartouche,"+"\n"
"delete the inadequate symbol manualy.")
self.pushButton10.setEnabled(False)
self.pushButton10.setObjectName(_fromUtf8("pushButton10"))
self.pushButton10.clicked.connect(self.on_pushButton10_clicked) #connection pushButton10
#####
self.pushButton06 = QtGui.QPushButton(self.centralWidget)
self.pushButton06.setGeometry(QtCore.QRect(170, 57, 20, 20))
self.pushButton06.setObjectName(_fromUtf8("pushButton06"))
self.pushButton06.clicked.connect(self.on_pushButton06_clicked) #connection pushButton06
self.pushButton07 = QtGui.QPushButton(self.centralWidget)
self.pushButton07.setGeometry(QtCore.QRect(190, 57, 20, 20))
self.pushButton07.setObjectName(_fromUtf8("pushButton07"))
self.pushButton07.clicked.connect(self.on_pushButton07_clicked) #connection pushButton07
self.pushButton08 = QtGui.QPushButton(self.centralWidget)
self.pushButton08.setGeometry(QtCore.QRect(170, 137, 20, 20))
self.pushButton08.setObjectName(_fromUtf8("pushButton08"))
self.pushButton08.clicked.connect(self.on_pushButton08_clicked) #connection pushButton08
self.pushButton09 = QtGui.QPushButton(self.centralWidget)
self.pushButton09.setGeometry(QtCore.QRect(190, 137, 20, 20))
self.pushButton09.setObjectName(_fromUtf8("pushButton09"))
self.pushButton09.clicked.connect(self.on_pushButton09_clicked) #connection pushButton09
self.lineEdit_01 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_01.setGeometry(QtCore.QRect(20, 20, 190, 16))
font = QtGui.QFont()
font.setPointSize(7)
self.lineEdit_01.setFont(font)
self.lineEdit_01.setObjectName(_fromUtf8("lineEdit_01"))
self.lineEdit_01.setText(DESIGNED_BY)
self.lineEdit_02 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_02.setGeometry(QtCore.QRect(20, 60, 82, 16))
font = QtGui.QFont()
font.setPointSize(7)
self.lineEdit_02.setFont(font)
self.lineEdit_02.setObjectName(_fromUtf8("lineEdit_02"))
self.lineEdit_02.setText(CREA_DATE)
self.lineEdit_02h = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_02h.setGeometry(QtCore.QRect(98, 60, 72, 16))
font = QtGui.QFont()
font.setPointSize(7)
self.lineEdit_02h.setFont(font)
self.lineEdit_02h.setObjectName(_fromUtf8("lineEdit_02h"))
self.lineEdit_02h.setText(CREA_TIME)
self.lineEdit_03 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_03.setGeometry(QtCore.QRect(20, 100, 190, 16))
font = QtGui.QFont()
font.setPointSize(7)
self.lineEdit_03.setFont(font)
self.lineEdit_03.setObjectName(_fromUtf8("lineEdit_03"))
self.lineEdit_03.setText(CHECKED_BY)
self.lineEdit_04 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_04.setGeometry(QtCore.QRect(20, 140, 82, 16))
font = QtGui.QFont()
font.setPointSize(7)
self.lineEdit_04.setFont(font)
self.lineEdit_04.setObjectName(_fromUtf8("lineEdit_04"))
self.lineEdit_04.setText(CHEC_DATE)
self.lineEdit_04h = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_04h.setGeometry(QtCore.QRect(98, 140, 72, 16))
font = QtGui.QFont()
font.setPointSize(7)
self.lineEdit_04h.setFont(font)
self.lineEdit_04h.setObjectName(_fromUtf8("lineEdit_04h"))
self.lineEdit_04h.setText(CHEC_TIME)
self.lineEdit_06 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_06.setGeometry(QtCore.QRect(20, 280, 61, 41))
font = QtGui.QFont()
font.setPointSize(10)
self.lineEdit_06.setFont(font)
self.lineEdit_06.setAlignment(QtCore.Qt.AlignCenter)
self.lineEdit_06.setObjectName(_fromUtf8("lineEdit_06"))
self.lineEdit_06.setText(SCALE)
self.lineEdit_07 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_07.setGeometry(QtCore.QRect(100, 280, 101, 41))
font = QtGui.QFont()
font.setPointSize(10)
self.lineEdit_07.setFont(font)
self.lineEdit_07.setAlignment(QtCore.Qt.AlignCenter)
self.lineEdit_07.setObjectName(_fromUtf8("lineEdit_07"))
self.lineEdit_07.setText(WEIGHT)
self.lineEdit_08 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_08.setGeometry(QtCore.QRect(220, 280, 341, 41))
self.lineEdit_08.setObjectName(_fromUtf8("lineEdit_08"))
self.lineEdit_08.setText(DRAWING_NUMBER)
self.lineEdit_09 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_09.setGeometry(QtCore.QRect(570, 280, 81, 41))
self.lineEdit_09.setObjectName(_fromUtf8("lineEdit_09"))
self.lineEdit_09.setText(SHEET)
self.lineEdit_20 = QtGui.QLineEdit(self.centralWidget) # Copyright
self.lineEdit_20.setGeometry(QtCore.QRect(20, 330, 771, 22))
self.lineEdit_20.setObjectName(_fromUtf8("lineEdit_20"))
self.lineEdit_20.setText(COPYRIGHT)
self.lineEdit_10 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_10.setGeometry(QtCore.QRect(690, 290, 101, 30))
self.lineEdit_10.setObjectName(_fromUtf8("lineEdit_10"))
self.lineEdit_10.setText(Note_A)
self.lineEdit_11 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_11.setGeometry(QtCore.QRect(690, 260, 101, 30))
self.lineEdit_11.setObjectName(_fromUtf8("lineEdit_11"))
self.lineEdit_11.setText(Note_B)
self.lineEdit_12 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_12.setGeometry(QtCore.QRect(690, 230, 101, 30))
self.lineEdit_12.setObjectName(_fromUtf8("lineEdit_12"))
self.lineEdit_12.setText(Note_C)
self.lineEdit_13 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_13.setGeometry(QtCore.QRect(690, 200, 101, 30))
self.lineEdit_13.setObjectName(_fromUtf8("lineEdit_13"))
self.lineEdit_13.setText(Note_D)
self.lineEdit_14 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_14.setGeometry(QtCore.QRect(690, 170, 101, 30))
self.lineEdit_14.setObjectName(_fromUtf8("lineEdit_14"))
self.lineEdit_14.setText(Note_E)
self.lineEdit_15 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_15.setGeometry(QtCore.QRect(690, 140, 101, 30))
self.lineEdit_15.setObjectName(_fromUtf8("lineEdit_15"))
self.lineEdit_15.setText(Note_F)
self.lineEdit_16 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_16.setGeometry(QtCore.QRect(690, 110, 101, 30))
self.lineEdit_16.setObjectName(_fromUtf8("lineEdit_16"))
self.lineEdit_16.setText(Note_G)
self.lineEdit_17 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_17.setGeometry(QtCore.QRect(690, 80, 101, 30))
self.lineEdit_17.setObjectName(_fromUtf8("lineEdit_17"))
self.lineEdit_17.setText(Note_H)
self.lineEdit_18 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_18.setGeometry(QtCore.QRect(690, 50, 101, 30))
self.lineEdit_18.setObjectName(_fromUtf8("lineEdit_18"))
self.lineEdit_18.setText(Note_I)
##
self.lineEdit_page = QtGui.QLineEdit(self.centralWidget) # nom de page
self.lineEdit_page.setGeometry(QtCore.QRect(20, 365, 181, 20))
self.lineEdit_page.setToolTip("Name page to work"+"\n"
"The name of the first page is always named 'Page'"
"Select the new page in the Combo view")
self.lineEdit_page.setObjectName(_fromUtf8("lineEdit_page"))
self.lineEdit_page.setEnabled(False)
self.lineEdit_page.setStyleSheet("color: red")
self.lineEdit_page.setText(PageActive)
self.lineEdit_page.textChanged.connect(self.on_lineEdit_page_Pressed) #
self.label_01T = QtGui.QLabel(self.centralWidget)
self.label_01T.setGeometry(QtCore.QRect(220, 0, 91, 16))
self.label_01T.setObjectName(_fromUtf8("label_01T"))
self.textEdit_01 = QtGui.QTextEdit(self.centralWidget) # Title
self.textEdit_01.setGeometry(QtCore.QRect(220, 20, 431,55 ))
font = QtGui.QFont()
font.setPointSize(15)
font.setBold(True)
font.setWeight(75)
self.textEdit_01.setFont(font)
self.textEdit_01.setObjectName(_fromUtf8("textEdit_01"))
self.textEdit_01.setText(TITLE)
self.label_02T = QtGui.QLabel(self.centralWidget)
self.label_02T.setGeometry(QtCore.QRect(220, 80, 101, 16))
self.label_02T.setObjectName(_fromUtf8("label_02T"))
self.textEdit_02 = QtGui.QTextEdit(self.centralWidget) # DESCRIPTION
self.textEdit_02.setGeometry(QtCore.QRect(220, 100, 431, 55))
self.textEdit_02.setObjectName(_fromUtf8("textEdit_02"))
self.textEdit_02.setText(DESCRIPTION)
self.label_02bT = QtGui.QLabel(self.centralWidget)
self.label_02bT.setGeometry(QtCore.QRect(220, 160, 90, 16))
self.label_02bT.setObjectName(_fromUtf8("label_02bT"))
self.textEdit_02b = QtGui.QTextEdit(self.centralWidget) # COMPANY
self.textEdit_02b.setGeometry(QtCore.QRect(220, 180, 340, 60))
self.textEdit_02b.setObjectName(_fromUtf8("textEdit_02b"))
self.textEdit_02b.setText(COMPANY)
self.label_01 = QtGui.QLabel(self.centralWidget)
self.label_01.setGeometry(QtCore.QRect(20, 0, 91, 16))
self.label_01.setObjectName(_fromUtf8("label_01"))
self.label_02 = QtGui.QLabel(self.centralWidget)
self.label_02.setGeometry(QtCore.QRect(20, 40, 53, 16))
self.label_02.setObjectName(_fromUtf8("label_02"))
self.label_03 = QtGui.QLabel(self.centralWidget)
self.label_03.setGeometry(QtCore.QRect(20, 80, 101, 16))
self.label_03.setObjectName(_fromUtf8("label_03"))
self.label_04 = QtGui.QLabel(self.centralWidget)
self.label_04.setGeometry(QtCore.QRect(20, 120, 91, 16))
self.label_04.setObjectName(_fromUtf8("label_04"))
self.label_06 = QtGui.QLabel(self.centralWidget)
self.label_06.setGeometry(QtCore.QRect(20, 260, 53, 16))
self.label_06.setObjectName(_fromUtf8("label_06"))
self.label_07 = QtGui.QLabel(self.centralWidget)
self.label_07.setGeometry(QtCore.QRect(100, 260, 101, 16))
self.label_07.setObjectName(_fromUtf8("label_07"))
self.label_08 = QtGui.QLabel(self.centralWidget)
self.label_08.setGeometry(QtCore.QRect(220, 260, 121, 16))
self.label_08.setObjectName(_fromUtf8("label_08"))
self.label_09 = QtGui.QLabel(self.centralWidget)
self.label_09.setGeometry(QtCore.QRect(570, 260, 53, 16))
self.label_09.setObjectName(_fromUtf8("label_09"))
self.label_10 = QtGui.QLabel(self.centralWidget)
self.label_10.setGeometry(QtCore.QRect(670, 290, 16, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_10.setFont(font)
self.label_10.setObjectName(_fromUtf8("label_10"))
self.label_11 = QtGui.QLabel(self.centralWidget)
self.label_11.setGeometry(QtCore.QRect(670, 260, 16, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_11.setFont(font)
self.label_11.setObjectName(_fromUtf8("label_11"))
self.label_12 = QtGui.QLabel(self.centralWidget)
self.label_12.setGeometry(QtCore.QRect(670, 230, 16, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_12.setFont(font)
self.label_12.setObjectName(_fromUtf8("label_12"))
self.label_13 = QtGui.QLabel(self.centralWidget)
self.label_13.setGeometry(QtCore.QRect(670, 200, 18, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_13.setFont(font)
self.label_13.setObjectName(_fromUtf8("label_13"))
self.label_14 = QtGui.QLabel(self.centralWidget)
self.label_14.setGeometry(QtCore.QRect(670, 170, 15, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_14.setFont(font)
self.label_14.setObjectName(_fromUtf8("label_14"))
self.label_15 = QtGui.QLabel(self.centralWidget)
self.label_15.setGeometry(QtCore.QRect(670, 140, 14, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_15.setFont(font)
self.label_15.setObjectName(_fromUtf8("label_15"))
self.label_16 = QtGui.QLabel(self.centralWidget)
self.label_16.setGeometry(QtCore.QRect(670, 110, 18, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_16.setFont(font)
self.label_16.setObjectName(_fromUtf8("label_16"))
self.label_17 = QtGui.QLabel(self.centralWidget)
self.label_17.setGeometry(QtCore.QRect(670, 80, 18, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_17.setFont(font)
self.label_17.setObjectName(_fromUtf8("label_17"))
self.label_18 = QtGui.QLabel(self.centralWidget)
self.label_18.setGeometry(QtCore.QRect(670, 50, 10, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_18.setFont(font)
self.label_18.setObjectName(_fromUtf8("label_18"))
self.label_19 = QtGui.QLabel(self.centralWidget)
self.label_19.setGeometry(QtCore.QRect(720, 15, 100, 33))
self.label_19.setObjectName(_fromUtf8("label_19"))
self.label_page = QtGui.QLabel(self.centralWidget)
self.label_page.setGeometry(QtCore.QRect(20, 350, 181, 16))
self.label_page.setObjectName(_fromUtf8("label_page"))
self.label_Version = QtGui.QLabel(self.centralWidget) # Version
self.label_Version.setGeometry(QtCore.QRect(685, 383, 121, 20))
self.label_Version.setObjectName(_fromUtf8("label_Version"))
MainWindow.setCentralWidget(self.centralWidget)
self.retranslateUi(MainWindow)
QtCore.QMetaObject.connectSlotsByName(MainWindow)
def retranslateUi(self, MainWindow):
MainWindow.setWindowFlags(PySide.QtCore.Qt.WindowStaysOnTopHint) # cette fonction met la fenetre en avant
MainWindow.setWindowTitle("Cartouche (Full)")
# self.pushButton01.setText("Position")
self.pushButton02.setText("Quit") #Quitter
self.pushButton03.setText("Memo")
self.pushButton04.setText("Clean")#Nettoyer
self.pushButton05.setText("Write")#Appliquer
self.pushButton06.setText("D.")
self.pushButton07.setText("H.")
self.pushButton08.setText("D.")
self.pushButton09.setText("H.")
self.pushButton10.setText("Create Symb.")
self.label_01.setText("Designed by :")
self.label_02.setText("Date :")
self.label_03.setText("Checked by :")
self.label_04.setText("Date :")
self.label_06.setText("Scale :")
self.label_07.setText("Weight (Kg) :")
self.label_08.setText("Drawing number :")
self.label_01T.setText("Title :")
self.label_02T.setText("Description :")
self.label_02bT.setText("Company :")
self.label_09.setText("Sheet :")
self.label_10.setText("A")
self.label_11.setText("B")
self.label_12.setText("C")
self.label_13.setText("D")
self.label_14.setText("E")
self.label_15.setText("F")
self.label_16.setText("G")
self.label_17.setText("H")
self.label_18.setText("I")
self.label_19.setText("Notes")
self.label_20.setText("Warning")
self.label_page.setText("Name page to work")
self.label_Version.setText("Ver: 00.10 15/02/2017") # Version
self.groupBox.setTitle("Size :")
self.radioButton_1.setText("A3 Landscape")
self.radioButton_2.setText("A3 Portrait")
self.radioButton_3.setText("A4 Landscape")
self.radioButton_4.setText("A4 Portrait")
self.radioButton_EU.setText("EU")
self.radioButton_US.setText("US")
self.lineEdit_05.setText("?")
#______________________________________________________________________________________
# Radio Boutons
def on_radioButton_A3_clicked(self): # connect radioButton_A3
self.label_20.setVisible(False)
self.pushButton10.setEnabled(True)
self.lineEdit_05.setText("A3")
self.pushButton10.setStyleSheet("color: QPalette.Base") # origin system
def on_radioButton_A4_clicked(self): # connect radioButton_A4
self.label_20.setVisible(False)
self.pushButton10.setEnabled(True)
self.lineEdit_05.setText("A4")
self.pushButton10.setStyleSheet("color: QPalette.Base") # origin system
# Radio Boutons
def on_radioButton_EU_clicked(self): # Bouton /Symbole EU
global SymbolSwitch
SymbolSwitch = 1
def on_radioButton_US_clicked(self): # Bouton /Symbole US
global SymbolSwitch
SymbolSwitch = 0
def on_pushButton10_clicked(self): # Bouton /Symbole EU US disposition dans le cartouche
global SymbolSwitch
global PageActive
self.label_20.setVisible(False)
if self.radioButton_0.isChecked():
self.label_20.setVisible(True)
self.pushButton10.setEnabled(False)
self.pushButton10.setStyleSheet("color: red")
self.lineEdit_page.setStyleSheet("color: red")
FreeCAD.Console.PrintError("Select one format A3 or A4 for the Symbole" + "\n")
else:
self.pushButton10.setEnabled(True)
self.pushButton10.setStyleSheet("background-color: #FF5B2B")
self.pushButton10.setText("Wait.")
FreeCADGui.updateGui() # rafraichi l'ecran
if SymbolSwitch == 1:
if self.radioButton_1.isChecked():
symbol_EU(247.5, 263.5, 0.8) # A3 Landscape
elif self.radioButton_2.isChecked():
symbol_EU(124.55, 386.3, 0.8) # A3 Portrait
elif self.radioButton_3.isChecked():
symbol_EU(158.7, 181.35, 0.6) # A4 Landscape
elif self.radioButton_4.isChecked():
symbol_EU(71.9, 269.0, 0.6) # A4 Portrait
else:
if self.radioButton_1.isChecked():
symbol_US(247.5, 263.5, 0.8) # A3 Landscape
elif self.radioButton_2.isChecked():
symbol_US(124.55, 386.3, 0.8) # A3 Portrait
elif self.radioButton_3.isChecked():
symbol_US(158.7, 181.35, 0.6) # A4 Landscape
elif self.radioButton_4.isChecked():
symbol_US(71.9, 269.0, 0.6) # A4 Portrait
self.pushButton10.setStyleSheet("color: QPalette.Base") # origin system
self.pushButton10.setText("Create Symb.")
FreeCADGui.updateGui() # rafraichi l'ecran
def on_lineEdit_page_Pressed(self): # Name page
global PageActive
PageActive = self.lineEdit_page.text()
def on_pushButton09_clicked(self): # Bouton /heure document
self.lineEdit_04h.setText(str(heure()))
def on_pushButton08_clicked(self): # Bouton date/ document
global SymbolSwitch
if SymbolSwitch==0:
self.lineEdit_04.setText(str(dateUs()))
else:
self.lineEdit_04.setText(str(dateEu()))
def on_pushButton07_clicked(self): # Bouton /heure checked
self.lineEdit_02h.setText(str(heure()))
def on_pushButton06_clicked(self): # Bouton date/ checked
global SymbolSwitch
if SymbolSwitch==0:
self.lineEdit_02.setText(str(dateUs()))
else:
self.lineEdit_02.setText(str(dateEu()))
def on_pushButton05_clicked(self): # Bouton Appliquer
try:
global DESIGNED_BY, CREATION_DATE, CREA_DATE , CREA_TIME, CHECKED_BY, CHECK_DATE
global CHEC_DATE , CHEC_TIME , SIZE , SCALE , WEIGHT ,DRAWING_NUMBER
global SHEET , TITLE , DESCRIPTION, COMPANY , COPYRIGHT
global Note_A, Note_B, Note_C, Note_D, Note_E, Note_F, Note_G, Note_H, Note_I
global ui
global SymbolSwitch
global PageActive
try:
page = App.activeDocument().getObjectsByLabel(PageActive.encode('utf-8'))[0]
except Exception:
page = App.activeDocument().getObjectsByLabel(PageActive)[0]
if len(str(page)) != 2:
self.pushButton05.setStyleSheet("background-color: #FF5B2B")
self.pushButton05.setText("Wait.")
FreeCADGui.updateGui() # rafraichi l'ecran
DESIGNED_BY = (self.lineEdit_01.text())
CREATION_DATE = (self.lineEdit_02.text())+" - "+(self.lineEdit_02h.text())
CHECKED_BY = (self.lineEdit_03.text())
CHECK_DATE = (self.lineEdit_04.text())+" - "+(self.lineEdit_04h.text())
SIZE = (self.lineEdit_05.text())
SCALE = (self.lineEdit_06.text())
WEIGHT = (self.lineEdit_07.text())
DRAWING_NUMBER = (self.lineEdit_08.text())
SHEET = (self.lineEdit_09.text())
TITLE = (self.textEdit_01.toPlainText())
DESCRIPTION = (self.textEdit_02.toPlainText())
COMPANY = (self.textEdit_02b.toPlainText())
COPYRIGHT = (self.lineEdit_20.text())
Note_A = (self.lineEdit_10.text())
Note_B = (self.lineEdit_11.text())
Note_C = (self.lineEdit_12.text())
Note_D = (self.lineEdit_13.text())
Note_E = (self.lineEdit_14.text())
Note_F = (self.lineEdit_15.text())
Note_G = (self.lineEdit_16.text())
Note_H = (self.lineEdit_17.text())
Note_I = (self.lineEdit_18.text())
try:
FreeCAD.getDocument(App.ActiveDocument.Name).getObject(page.Name).EditableTexts = [DESIGNED_BY, CREATION_DATE, CHECKED_BY, CHECK_DATE, SIZE, SCALE, WEIGHT, DRAWING_NUMBER, SHEET, TITLE, DESCRIPTION, COMPANY, COPYRIGHT, Note_A, Note_B, Note_C, Note_D, Note_E, Note_F, Note_G, Note_H, Note_I, ]
#old FreeCAD.getDocument(App.ActiveDocument.Name).getObjectsByLabel(PageActive.encode('utf-8'))[0].EditableTexts = [DESIGNED_BY, CREATION_DATE, CHECKED_BY, CHECK_DATE, SIZE, SCALE, WEIGHT, DRAWING_NUMBER, SHEET, TITLE, DESCRIPTION, COMPANY, COPYRIGHT, Note_A, Note_B, Note_C, Note_D, Note_E, Note_F, Note_G, Note_H, Note_I, ]
App.ActiveDocument.recompute()
FreeCAD.Console.PrintMessage("Write done to ( " + page.Label + " )" + "\n")
self.pushButton05.setStyleSheet("color: QPalette.Base")
except Exception:
FreeCAD.Console.PrintError("Error write cartouche or verify the selected page ( " + page.Label + " )" + "\n")
self.pushButton05.setStyleSheet("background-color: red")
else:
FreeCAD.Console.PrintError("Error selected page ( " + Page.Label + " )" + "\n")
self.pushButton05.setStyleSheet("background-color: red")
except Exception:
self.pushButton05.setStyleSheet("background-color: red")
FreeCAD.Console.PrintError("Error or not page " + "\n")
self.pushButton05.setText("Write")
App.ActiveDocument.recompute()
def on_pushButton04_clicked(self): # Bouton nettoyer
self.lineEdit_01.setText("")
self.lineEdit_02.setText("")
self.lineEdit_02h.setText("")
self.lineEdit_03.setText("")
self.lineEdit_04.setText("")
self.lineEdit_04h.setText("")
self.lineEdit_05.setText("?")
self.lineEdit_06.setText("")
self.lineEdit_07.setText("")
self.lineEdit_08.setText("")
self.lineEdit_09.setText("")
self.textEdit_01.setText("")
self.textEdit_02.setText("")
self.textEdit_02b.setText("")
self.lineEdit_20.setText("")
self.lineEdit_10.setText("")
self.lineEdit_11.setText("")
self.lineEdit_12.setText("")
self.lineEdit_13.setText("")
self.lineEdit_14.setText("")
self.lineEdit_15.setText("")
self.lineEdit_16.setText("")
self.lineEdit_17.setText("")
self.lineEdit_18.setText("")
self.pushButton10.setStyleSheet("color: QPalette.Base") # origin system
self.label_20.setVisible(False)
self.radioButton_0.setChecked(True)
self.pushButton05.setEnabled(True)
self.pushButton05.setStyleSheet("background-color: QPalette.Base") # origin system
self.groupBox.setEnabled(True)
def on_pushButton03_clicked(self): # Bouton Memo
global MDESIGNED_BY, MCREATION_DATE, MCREA_DATE , MCREA_TIME, MCHECKED_BY, MCHECK_DATE
global MCHEC_DATE , MCHEC_TIME , MSIZE , MSCALE , MWEIGHT ,MDRAWING_NUMBER
global MSHEET , MTITLE , MDESCRIPTION, MCOMPANY , MCOPYRIGHT
global MNote_A, MNote_B, MNote_C, MNote_D, MNote_E, MNote_F, MNote_G, MNote_H, MNote_I
self.lineEdit_01.setText(MDESIGNED_BY)
self.lineEdit_02.setText(MCREA_DATE)
self.lineEdit_02h.setText(MCREA_TIME)
self.lineEdit_03.setText(MCHECKED_BY)
self.lineEdit_04.setText(MCHEC_DATE)
self.lineEdit_04h.setText(MCHEC_TIME)
self.lineEdit_05.setText("?") #(SIZE)
self.lineEdit_06.setText(MSCALE)
self.lineEdit_07.setText(MWEIGHT)
self.lineEdit_08.setText(MDRAWING_NUMBER)
self.lineEdit_09.setText(MSHEET)
self.textEdit_01.setText(MTITLE)
self.textEdit_02.setText(MDESCRIPTION)
self.textEdit_02b.setText(MCOMPANY)
self.lineEdit_20.setText(MCOPYRIGHT)
self.lineEdit_10.setText(MNote_A)
self.lineEdit_11.setText(MNote_B)
self.lineEdit_12.setText(MNote_C)
self.lineEdit_13.setText(MNote_D)
self.lineEdit_14.setText(MNote_E)
self.lineEdit_15.setText(MNote_F)
self.lineEdit_16.setText(MNote_G)
self.lineEdit_17.setText(MNote_H)
self.lineEdit_18.setText(MNote_I)
# self.lineEdit_page.setText(PageActive)
self.radioButton_0.setChecked(True)
def on_pushButton02_clicked(self): # Bouton Quitter
App.Console.PrintMessage("End CartoucheFC_Full\r\n")
self.window.hide()
FreeCADGui.Selection.removeObserver(s) # Uninstalls the resident function
App.Console.PrintMessage("removeObserver"+"\n")
# def on_pushButton01_clicked(self): # Bouton appel de Position
# MainWindow.resize(210, 480)
# executer()
# MainWindow.resize(810, 480)
#______________________________________________________________________________________
class SelObserver:
print "run.."
def setSelection(self,document): # Selection in ComboView
global PageActive
global ui
if len(Gui.Selection.getSelection(document)) == 1:
ff = ui
ff.lineEdit_page.setStyleSheet("color: QPalette.Base") # origin system
ff.pushButton05.setEnabled(True)
ff.pushButton05.setStyleSheet("background-color: QPalette.Base") # origin system
ff.groupBox.setEnabled(True)
if (str(Gui.Selection.getSelection(document)[0].Name[0:4]) == "Page"):
PageActive = str(Gui.Selection.getSelection(document)[0].Label.encode('utf-8'))
try:
ff.lineEdit_page.setText(unicode(PageActive,'utf-8')) # convert if accent
except Exception:
ff.lineEdit_page.setText(PageActive) # normal
memoEntree() # entree memo click mouse
ff.on_pushButton03_clicked() # Bouton Memo
else:
FreeCAD.Console.PrintError("Select a valid Page__________________________" + "\n")
ff.lineEdit_page.setStyleSheet("color: red")
ff.lineEdit_page.setText("Select a valid Page") #
ff.pushButton05.setEnabled(False)
ff.pushButton05.setStyleSheet("background-color: red") # This function gives a color button
ff.groupBox.setEnabled(False)
FreeCAD.Console.PrintMessage(" " + "Name Label" + "\n")
for i in App.ActiveDocument.Objects:
if i.Name[0:4] == "Page":
name = i.Name + " "
labe = i.Label+ " "
FreeCAD.Console.PrintMessage(" Valid Page : " + name[:15] + "," + labe[:25] + "\n")
FreeCAD.Console.PrintError("_____________________________________________" + "\n")
for obj in FreeCAD.ActiveDocument.Objects: # deslectionne
FreeCADGui.Selection.removeSelection(obj)
s=SelObserver()
FreeCADGui.Selection.addObserver(s) # install the function mode resident
MainWindow = QtGui.QMainWindow()
ui = Ui_MainWindow(MainWindow)
MainWindow.show()
Other
The fields have no length limit, check your cartouche.
This program creates a drawing representing the regional projection symbol on your project, do not touch it is registered therefore hidden form invisible.
If you want it to be cleared uncomment the commented lines and vice versa
# App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_EU")
FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_EU").Visibility = False
et
# App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_US")
FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_US").Visibility = False
(I had some times an error in execution when the symbol was erased)
This module works with the drawing sheet included in FreeCAD this sheet is called Page, do not change the name of this sheet!
Revision
ver "00.10" : 15/02/2017 : tuning page multiple (It is possible to lose a page if there are too many)
ver "00.09" : 10/02/2017 : add radio button for choice symbol and correct the placement symbol in the separate page
ver "00.08 : 06/02/2017 : the dialog box name page accept the accent
ver "00.07 : 05/02/2017 : add save cartouche with name page (for multi page in projects) ps: not for character accentuate "àùé ..."
ver 00.06 : 13/10/2016 : selection format page and position for the symbol convention (for FreeCAD ver 0.17)
ver 5 : 08/08/2014 PyQt4 and PySide