Mouse Model/ro

---

Modelul mouse-ului in FreeCAD este constituit din comenzi folosite la navigarea spatiului 3D si interactiunea cu obiectele afisate. In versiunea actuala exista trei moduri diferite de navigare. Modul implicit este numit "Navigare CAD" si este foarte simplu si practic, dar FreeCAD are doua stiluri alternative modelate dupa navigarea in Inventor si Blender.

Navigarea

Modul de lucru cu obiecte este comun pentru toate paletele. Urmatoarele actiuni cu mouse-ul pot fi folosite pentru controlul pozitiei si modului de vizualizare, in functie de stilul de navigare selectat.

Exista doua moduri de a schimba stilul de navigare:

• In dialogul pentru preferinte, sectiunea Afisare, tab-ul Vizualizare 3D;
• Click-dreapta in spatiu liber in zona de vizualizare 3D, selectand Stil de navigare in meniul contextual.

Navigare CAD (implicita)

Acesta este modul de navigare implicit si permite utilizatorului un control simplu al vizualizarii; nu este nevoie de folosirea tastaturii decat pentru selectie multipla.

Selectare	Translatie	Zoom	Rotire
Apasati butonul stanga al mouse-ului deasupra obiectului de selectat. Apasarea tastei CTRL permite selectarea mai multor obiecte.	Apasati butonul din mijloc si miscati mouse-ul pentru a translata vizualizarea.	Folositi rotita mouse-ului pentru a mari sau micsora.	Apasati mai intai butonul din mijloc al mouse-ului, tineti-l apasat si apasati butonul stanga al mouse-ului si mutati-l in directia dorita. Functioneaza ca o bila ce se roteste in jurul centrului. Daca eliberati butoanele inainte de a inceta miscarea vizualizarea va continua sa se roteascain jurul centrului, daca aceasta caracteristica e activata. Dublu-click folosind butonul mijlociu pe oricare parte a unui obiect seteaza noul centru de rotatie si panorameaza pe acest punct.

Navigare Tip Blender

Touchpad Navigation

In Touchpad Navigation, neither panning, nor zooming, nor rotating the view, are mouse-only (or touchpad-only) operations.

Select	Pan	Zoom	Rotate View
	shift+	PgUp / PgDn	alt+
Press the left mouse button over an object you want to select.	Hold shift and move the object around.	Use PgUp and PgDn to zoom in and out.	Hold alt and move the pointer.
		or	or
		shift+ctrl+	shift+ctrl+
		Hold down both the shift and the ctrl keys, press the left mouse button, and move the pointer.	Hold down both the shift and the ctrl keys and move the pointer.

Gesture Navigation (v0.16)

This navigation style was tailored for usability with touchscreen and pen, but is very usable with mouse too.

Select	Pan	Zoom	Rotate View	Tilt View
Press the left mouse button over an object you want to select. Holding down Ctrl allows the selection of multiple objects.	Hold right mouse button and drag to pan the view.	Use the mouse wheel to zoom in and out. The zoom is centered at the cursor location.	Hold Left mouse button and drag to rotate the view. In Sketcher and other edit modes, this behavior is disabled. Hold Alt when pressing the mouse button to enter rotation mode. Rotation is always around camera's focus point. To set camera's focus point, click the new point with middle mouse button; the view will center on that point. Alternatively, aim the cursor at the new point and press H on keyboard.	Press both left and right mouse buttons, and drag left or right to tilt the view (adjust horizon).
	or
Tap to select.	Drag with two fingers to pan the view. Alternatively, tap and hold, then drag (simulates pan with right mouse button).	Pinch to zoom (i.e., drag two fingers to each other/apart).	Drag with one finger to rotate. Hold Alt additionally when in Sketcher and some other edit modes.	Rotate to tilt the view (i.e., put two fingers on surface and rotate the imaginary line formed by two touch points).

Notes on Gesture Navigation style:

• on Windows, the actions of two-finger gestures are separated. The action depends on how one starts the gesture. For example, if one starts two-finger pan, the gesture will only pan. Changing the distance between fingers afterwards will not affect the scaling.

Maya-Gesture Navigation

In Maya-Gesture Navigation, all view movements are activated pressing ALT and a mouse button, so that it will be needed to have a 3 button mouse in order to correctly use this navigation mode. Alternately it's possible to use gestures as this mode was been developed over the normal Gesture Navigation mode.

Select	Pan	Zoom	Rotate View
	alt+	alt+ or	alt+
Press the left mouse button over an object you want to select.	Hold alt, hold the middle mouse button and drag to pan the view.	Hold alt, hold the right mouse button and drag to zoom in and out or use the mouse wheel to get the same effect.	Hold alt, hold the left mouse button and drag to rotate the object around.

Selectarea Obiectelor

Obiectele se selecteaza cu click-stanga in vizualizarea 3D sau selectare in vizualizarea arborescenta.

Exista, de asemenea, si un mecanism de preselectie care evidentiaza obiectele si prezinta informatii despre ele inainte de a fi selectate, doar prin miscarea mouse-ului deasupra lor. Daca nu agreati acest comportament sau calculatorul este incet puteti sa-l suprimati din dialogul pentru preferinte.

Manipularea Obiectelor

FreeCAD ofera manipulatori ce pot fi folositi pentru a schimba aparenta sau proprietatile obiectului.

Un exemplu simplu este planul de taiere ce poate fi activat folosind meniul Vizualizare→Plan de taiere.

Suport Hardware

FreeCAD suporta si un numar de dispozitive 3D.

Mac OS X Issues

Recently we got reports on the forum from Mac users that those mouse button and key combination do not work as expected. Unfortunately, none of the developers owns a Mac, neither do the other regular contributors. We need your help to determine which mouse buttons and key combination work so we can update this wiki.