From 856b7844c01ed50fb2740920627b407e18bc6b75 Mon Sep 17 00:00:00 2001 From: Bernd Hahnebach Date: Tue, 20 Dec 2016 18:11:48 +0100 Subject: [PATCH] FEM: beamsection task panel, add length values and use combobox to choose the section type --- src/Mod/Fem/TaskPanelFemBeamSection.ui | 385 +++++++++++++++++++----- src/Mod/Fem/_TaskPanelFemBeamSection.py | 99 +++--- 2 files changed, 373 insertions(+), 111 deletions(-) diff --git a/src/Mod/Fem/TaskPanelFemBeamSection.ui b/src/Mod/Fem/TaskPanelFemBeamSection.ui index a8c551522..b9fbcf096 100644 --- a/src/Mod/Fem/TaskPanelFemBeamSection.ui +++ b/src/Mod/Fem/TaskPanelFemBeamSection.ui @@ -6,8 +6,8 @@ 0 0 - 492 - 560 + 350 + 500 @@ -15,75 +15,293 @@ - - - - 16777215 - 1677215 - - + - Cross Section + Cross section parameter - - - - - Use FreeCAD Property Editor - - + + + 9 + + + 6 + + + - - - - to edit the cross section values + + + + 2 - - - - - - Qt::Horizontal - - - - - - - Choose cross section type: - - - - - - - - - Rectangular + + + + 9 - - - - - - Circular + + 6 - - - - - - Pipe + + + + QFormLayout::AllNonFixedFieldsGrow + + + + + Width: + + + + + + + + 0 + 0 + + + + + 80 + 20 + + + + 0.0 + + + Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter + + + 1.000000000000000 + + + 1000000000.000000000000000 + + + mm + + + 2 + + + 0.000000000000000 + + + + + + + Height: + + + + + + + + 0 + 0 + + + + + 80 + 20 + + + + 0.0 + + + Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter + + + 1.000000000000000 + + + 1000000000.000000000000000 + + + mm + + + 2 + + + 0.000000000000000 + + + + + + + + + + + 9 - - - - - - - - Qt::Horizontal - + + 6 + + + + + QFormLayout::AllNonFixedFieldsGrow + + + + + + 0 + 0 + + + + + 80 + 20 + + + + Qt::LeftToRight + + + 0.0 + + + Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter + + + 1.000000000000000 + + + 1000000000.000000000000000 + + + mm + + + 2 + + + 0.000000000000000 + + + + + + + Diameter: + + + + + + + + + + + + + QFormLayout::AllNonFixedFieldsGrow + + + + + Diameter: + + + + + + + + 0 + 0 + + + + + 80 + 20 + + + + 0.0 + + + Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter + + + 1.000000000000000 + + + 1000000000.000000000000000 + + + mm + + + 2 + + + 0.000000000000000 + + + + + + + Thickness: + + + + + + + + 0 + 0 + + + + + 80 + 20 + + + + 0.0 + + + Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter + + + 1.000000000000000 + + + 1000000000.000000000000000 + + + mm + + + 2 + + + 0.000000000000000 + + + + + + + @@ -98,17 +316,7 @@ - Leave references blank - - - - - - - to choose all remaining shapes - - - true + Leave blank to choose all remaining shapes @@ -137,7 +345,6 @@ l_label_text_1 - l_label_text_2 pushButton_Reference list_References verticalSpacer @@ -145,6 +352,30 @@ + + + Gui::InputField + QLineEdit +
Gui/InputField.h
+ + - + + + cb_crosssectiontype + currentIndexChanged(int) + widget_stack + setCurrentIndex(int) + + + 245 + 45 + + + 245 + 126 + + + + diff --git a/src/Mod/Fem/_TaskPanelFemBeamSection.py b/src/Mod/Fem/_TaskPanelFemBeamSection.py index ffd0703b5..1da9d4ab7 100644 --- a/src/Mod/Fem/_TaskPanelFemBeamSection.py +++ b/src/Mod/Fem/_TaskPanelFemBeamSection.py @@ -31,6 +31,7 @@ import FreeCAD import FreeCADGui from PySide import QtGui from PySide import QtCore +import _FemBeamSection class _TaskPanelFemBeamSection: @@ -39,33 +40,27 @@ class _TaskPanelFemBeamSection: FreeCADGui.Selection.clearSelection() self.sel_server = None self.obj = obj - self.references = [] - if self.obj.References: - self.tuplereferences = self.obj.References - self.get_references() self.form = FreeCADGui.PySideUic.loadUi(FreeCAD.getHomePath() + "Mod/Fem/TaskPanelFemBeamSection.ui") - - if self.obj.SectionType == 'Rectangular': - self.form.rb_Rect.setChecked(True) - elif self.obj.SectionType == 'Circular': - self.form.rb_Circ.setChecked(True) - elif self.obj.SectionType == 'Pipe': - self.form.rb_Pipe.setChecked(True) - + QtCore.QObject.connect(self.form.cb_crosssectiontype, QtCore.SIGNAL("activated(int)"), self.sectiontype_changed) + QtCore.QObject.connect(self.form.if_rec_height, QtCore.SIGNAL("valueChanged(Base::Quantity)"), self.rec_height_changed) + QtCore.QObject.connect(self.form.if_rec_width, QtCore.SIGNAL("valueChanged(Base::Quantity)"), self.rec_width_changed) + QtCore.QObject.connect(self.form.if_circ_diameter, QtCore.SIGNAL("valueChanged(Base::Quantity)"), self.circ_diameter_changed) + QtCore.QObject.connect(self.form.if_pipe_diameter, QtCore.SIGNAL("valueChanged(Base::Quantity)"), self.pipe_diameter_changed) + QtCore.QObject.connect(self.form.if_pipe_thickness, QtCore.SIGNAL("valueChanged(Base::Quantity)"), self.pipe_thickness_changed) QtCore.QObject.connect(self.form.pushButton_Reference, QtCore.SIGNAL("clicked()"), self.add_references) - QtCore.QObject.connect(self.form.rb_Rect, QtCore.SIGNAL("clicked()"), self.rect_section) - QtCore.QObject.connect(self.form.rb_Circ, QtCore.SIGNAL("clicked()"), self.circ_section) - QtCore.QObject.connect(self.form.rb_Pipe, QtCore.SIGNAL("clicked()"), self.pipe_section) self.form.list_References.setContextMenuPolicy(QtCore.Qt.CustomContextMenu) self.form.list_References.connect(self.form.list_References, QtCore.SIGNAL("customContextMenuRequested(QPoint)"), self.references_list_right_clicked) - self.rebuild_list_References() + self.form.cb_crosssectiontype.addItems(_FemBeamSection._FemBeamSection.known_beam_types) + + self.get_beamsection_props() + self.update() def accept(self): + self.set_beamsection_props() if self.sel_server: FreeCADGui.Selection.removeObserver(self.sel_server) - self.obj.References = self.references FreeCADGui.ActiveDocument.resetEdit() FreeCAD.ActiveDocument.recompute() return True @@ -76,6 +71,59 @@ class _TaskPanelFemBeamSection: FreeCADGui.ActiveDocument.resetEdit() return True + def get_beamsection_props(self): + self.references = [] + if self.obj.References: + self.tuplereferences = self.obj.References + self.get_references() + self.SectionType = self.obj.SectionType + self.RectHeight = self.obj.RectHeight + self.RectWidth = self.obj.RectWidth + self.CircRadius = self.obj.CircRadius + self.PipeRadius = self.obj.PipeRadius + self.PipeThickness = self.obj.PipeThickness + + def set_beamsection_props(self): + self.obj.References = self.references + self.obj.SectionType = self.SectionType + self.obj.RectHeight = self.RectHeight + self.obj.RectWidth = self.RectWidth + self.obj.CircRadius = self.CircRadius + self.obj.PipeRadius = self.PipeRadius + self.obj.PipeThickness = self.PipeThickness + + def update(self): + 'fills the widgets' + index_crosssectiontype = self.form.cb_crosssectiontype.findText(self.SectionType) + self.form.cb_crosssectiontype.setCurrentIndex(index_crosssectiontype) + self.form.if_rec_height.setText(self.RectHeight.UserString) + self.form.if_rec_width.setText(self.RectWidth.UserString) + self.form.if_circ_diameter.setText(self.CircRadius.UserString) + self.form.if_pipe_diameter.setText(self.PipeRadius.UserString) + self.form.if_pipe_thickness.setText(self.PipeThickness.UserString) + self.rebuild_list_References() + + def sectiontype_changed(self, index): + if index < 0: + return + self.form.cb_crosssectiontype.setCurrentIndex(index) + self.SectionType = str(self.form.cb_crosssectiontype.itemText(index)) # form returns unicode + + def rec_height_changed(self, base_quantity_value): + self.RectHeight = base_quantity_value + + def rec_width_changed(self, base_quantity_value): + self.RectWidth = base_quantity_value + + def circ_diameter_changed(self, base_quantity_value): + self.CircRadius = base_quantity_value + + def pipe_diameter_changed(self, base_quantity_value): + self.PipeRadius = base_quantity_value + + def pipe_thickness_changed(self, base_quantity_value): + self.PipeThickness = base_quantity_value + def get_references(self): for ref in self.tuplereferences: for elem in ref[1]: @@ -111,23 +159,6 @@ class _TaskPanelFemBeamSection: import FemSelectionObserver self.sel_server = FemSelectionObserver.FemSelectionObserver(self.selectionParser, print_message) - def rect_section(self): - '''Called if Rectangular radio button is triggered''' - self.obj.SectionType = 'Rectangular' - self.obj.RectWidth = 20.0 - self.obj.RectHeight = 20.0 - - def circ_section(self): - '''Called if Circular radio button is triggered''' - self.obj.SectionType = 'Circular' - self.obj.CircRadius = 20.0 - - def pipe_section(self): - '''Called if Pipe radio button is triggered''' - self.obj.SectionType = 'Pipe' - self.obj.PipeRadius = 20.0 - self.obj.PipeThickness = 2.0 - def selectionParser(self, selection): # print('selection: ', selection[0].Shape.ShapeType, ' ', selection[0].Name, ' ', selection[1]) if hasattr(selection[0], "Shape"):