From 8750ac5916c19abaafbfd6cc66bd4ddb7985da7e Mon Sep 17 00:00:00 2001
From: Sergo <usakhelo@users.noreply.github.com>
Date: Sun, 21 Aug 2016 00:45:53 -0400
Subject: [PATCH] Test: Add case to test attempt when feature is not movable

---
 src/Mod/PartDesign/TestPartDesignGui.py | 80 ++++++++++++++++++++++++-
 1 file changed, 78 insertions(+), 2 deletions(-)

diff --git a/src/Mod/PartDesign/TestPartDesignGui.py b/src/Mod/PartDesign/TestPartDesignGui.py
index 38988f21c..08144711e 100644
--- a/src/Mod/PartDesign/TestPartDesignGui.py
+++ b/src/Mod/PartDesign/TestPartDesignGui.py
@@ -33,12 +33,21 @@ from PySide import QtGui, QtCore
 from PySide.QtGui import QApplication
 
 #timer runs this class in order to access modal dialog
-class Callable:
+class CallableCheckWarning:
 	def __init__(self, test):
 		self.test = test
 	def __call__(self):
 		diag = QApplication.activeModalWidget()
 		self.test.assertIsNotNone(diag, "Input dialog box could not be found")
+		if (diag != None):
+			QtCore.QTimer.singleShot(0, diag, QtCore.SLOT('accept()'))
+
+class CallableComboBox:
+	def __init__(self, test):
+		self.test = test
+	def __call__(self):
+		diag = QApplication.activeModalWidget()
+		self.test.assertIsNotNone(diag, "Warning dialog box could not be found")
 		if (diag != None):
 			cbox = diag.findChild(QtGui.QComboBox)
 			self.test.assertIsNotNone(cbox, "ComboBox widget could not be found")
@@ -55,6 +64,70 @@ class PartDesignGuiTestCases(unittest.TestCase):
 	def setUp(self):
 		self.Doc = FreeCAD.newDocument("SketchGuiTest")
 
+	def testRefuseToMoveSingleFeature(self):
+		FreeCAD.Console.PrintMessage('Testing moving one feature from one body to another\n')
+		self.BodySource = self.Doc.addObject('PartDesign::Body','Body')
+		Gui.activeView().setActiveObject('pdbody', self.BodySource)
+
+		self.BoxObj = self.Doc.addObject('PartDesign::AdditiveBox','Box')
+		self.BoxObj.Length=10.0
+		self.BoxObj.Width=10.0
+		self.BoxObj.Height=10.0
+		self.BodySource.addFeature(self.BoxObj)
+
+		self.BoxCoords = self.Doc.addObject('PartDesign::CoordinateSystem','CoordinateSystem')
+		self.BodySource.addFeature(self.BoxCoords)
+		self.BoxObj.CoordinateSystem=(self.BoxCoords)
+		App.ActiveDocument.recompute()
+		Gui.activeDocument().hide('CoordinateSystem')
+
+		self.Sketch = self.Doc.addObject('Sketcher::SketchObject','Sketch')
+		self.Sketch.Support = (self.BoxObj, ('Face3',))
+		self.Sketch.MapMode = 'FlatFace'
+		self.BodySource.addFeature(self.Sketch)
+
+		geoList = []
+		geoList.append(Part.Line(App.Vector(2.0,8.0,0),App.Vector(8.0,8.0,0)))
+		geoList.append(Part.Line(App.Vector(8.0,8.0,0),App.Vector(8.0,2.0,0)))
+		geoList.append(Part.Line(App.Vector(8.0,2.0,0),App.Vector(2.0,2.0,0)))
+		geoList.append(Part.Line(App.Vector(2.0,2.0,0),App.Vector(2.0,8.0,0)))
+		self.Sketch.addGeometry(geoList,False)
+		conList = []
+		conList.append(Sketcher.Constraint('Coincident',0,2,1,1))
+		conList.append(Sketcher.Constraint('Coincident',1,2,2,1))
+		conList.append(Sketcher.Constraint('Coincident',2,2,3,1))
+		conList.append(Sketcher.Constraint('Coincident',3,2,0,1))
+		conList.append(Sketcher.Constraint('Horizontal',0))
+		conList.append(Sketcher.Constraint('Horizontal',2))
+		conList.append(Sketcher.Constraint('Vertical',1))
+		conList.append(Sketcher.Constraint('Vertical',3))
+		self.Sketch.addConstraint(conList)
+
+		self.Pad = self.Doc.addObject("PartDesign::Pad","Pad")
+		self.Pad.Profile = self.Sketch
+		self.Pad.Length = 10.000000
+		self.Pad.Length2 = 100.000000
+		self.Pad.Type = 0
+		self.Pad.UpToFace = None
+		self.Pad.Reversed = 0
+		self.Pad.Midplane = 0
+		self.Pad.Offset = 0.000000
+
+		self.BodySource.addFeature(self.Pad)
+
+		self.Doc.recompute()
+		Gui.SendMsgToActiveView("ViewFit")
+
+		self.BodyTarget = self.Doc.addObject('PartDesign::Body','Body')
+		
+		Gui.Selection.addSelection(App.ActiveDocument.Pad)
+		cobj = CallableCheckWarning(self)
+		QtCore.QTimer.singleShot(500, cobj)
+		Gui.runCommand('PartDesign_MoveFeature')
+		#assert depenedencies of the Sketch
+		self.assertEqual(len(self.BodySource.Model), 4, "Source body feature count is wrong")
+		self.assertEqual(len(self.BodyTarget.Model), 0, "Target body feature count is wrong")
+
 	def testMoveSingleFeature(self):
 		FreeCAD.Console.PrintMessage('Testing moving one feature from one body to another\n')
 		self.BodySource = self.Doc.addObject('PartDesign::Body','Body')
@@ -100,9 +173,12 @@ class PartDesignGuiTestCases(unittest.TestCase):
 		self.BodyTarget = self.Doc.addObject('PartDesign::Body','Body')
 		
 		Gui.Selection.addSelection(App.ActiveDocument.Pad)
-		cobj = Callable(self)
+		cobj = CallableComboBox(self)
 		QtCore.QTimer.singleShot(500, cobj)
 		Gui.runCommand('PartDesign_MoveFeature')
+		#assert depenedencies of the Sketch
+		self.assertFalse(self.Sketch.Support[0][0] in self.BodySource.Origin.OriginFeatures)
+		self.assertTrue(self.Sketch.Support[0][0] in self.BodyTarget.Origin.OriginFeatures)
 		self.assertEqual(len(self.BodySource.Model), 0, "Source body feature count is wrong")
 		self.assertEqual(len(self.BodyTarget.Model), 2, "Target body feature count is wrong")