The order of appearance of the constraints determines how redundancies
are handled.
PlaneCoincident: the second PlaneCoincident of the same pair or parts is
relax to a 2d point horizontal or vertical constraint. The third and
onwards are ignored. Any PlaneCoincident constraint will be ignored if
there are any existing PlaneCoincident or AxialAlignment.
PlaneAlignment: the second one is relaxed to two PointInPlane or
PointPlaneDistance constraint. The third one is relaxed to one
PointInPlane or PointPlaneDistance. The forth and onwards are ignored.
Any PlaneCoincident constraint will be ignored if there are any existing
PlaneCoincident or AxialAlignment.
AxialAlignment: ignored if there are any existing PlaneAlignment or
PlaneCoincident constraints
Add init() api to calculate the some of the constraints' parameter
(e.g. angle, distance, length, etc.) based on the existing elements.
This can reduce excessive movement when auto recompute is on.
The SketchPlane expects the first element to be a planar face/edge to
define a work plane for any following draft wire/circle/arc elements.
The 2D constrainted elements can either be inside the defining
SketchPlane constraint, or other constrains following the SketchPlane
in the constraint group.
Add a new SketchPlane to define a new work plane for any following
draft elements. Add an empty SketchPlane to undefine the work plane,
effectively making any following draft elements free in 3D space.
* Draft wire points can be dragged individually.
* Draft wire individual edge can be moved and rotated.
* Draft circle/arc can be moved and rotated by dragging edge or face.
* Draft circle/arc radius can be changed by dragging vertex
* Draft arc first/last angle can be changed by dragging end points
When added to an assembly, a normal part object has six degrees of
freedom, three positional and three rotational. A draft circle has one
additional dof, its radius. And a draft arc has three additional dof,
radius, first angle and last angle.
Special treatment for non-closed-or-subdivided draft wire object
directly added into part group. Instead of constraining on the object
placement, we shall constraint on individual points. In other word,
instead of making the draft wire's placement as free parameters, we
make the cooridnates of indvidual points as free parameters.
Working constraints:
PointPlaneDistance
PointInPlane
Angle
Perpendicular
Parallel
New constraints, which are composite of slvs native constraints:
PlaneCoincident
PlaneAlignment
AxialAlignment
MultiParallel
