suzanne.soy/WorkFeature
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

into "Circle" TAB :

Browse Source 
Create a normal Axis of a Face. 
New handle of mesh objects.
To create a Normal at click location on a Face:
- Click first in the view to select and object,
- then push the button, 
- then click on a location on the selected Face.
or
To create several Normal of the face:
- Click first in the view to select and object,
- then select one or several points of the face
- then push the button.
(These selections can also be done into the Combined View)

into "Object" TAB :
Section Sweep:
# Make a loft defined by a list of profiles along a wire.
Will extrude/sweep a Section along a Trajectory like sweep from Part Workbench but:
- the Section center (of Mass) is move at the first point of the Trajectory and;
- the "plane" of the Section is rotate to be perpendicular to the Trajectory.

- Select first one Section wire (Closed wire will generate volumes by default)
(This Section can be a compound from sketch to realize "tube")
- Select one or several wire(s) as Trajectory(ies)
- Then push this button

NB: You can change first:
- Solid option (if toggled will generate a solid for Closed wire Section only) 
- isFrenet option
- All option (means if the trajectory selected is a compound, all sub wires will be used for the sweep)
- Transition Option (Select a Transition option in case of trajectory with several wires; Transition can be:
# 0 (default), 1 (right corners) or 2 (rounded corners).)

into  "Align" TAB :
Align the Face(s) from selected object(s) to the last Face selected.
- Click first to select a Face of an object or several Faces from several objects. 
These objects will be moved.
- Click second to select a Face to align to (the last object is fixed and will never move).
Then Click the button.

NB:
The center of rotation is the center of the bounbing box if possible or 
the center of the Face.
if the Face of the object selected is already aligned to the last one,
a rotation of 180 deg is applied to the object.
In this case the Axis of rotation is Z vector : Base.Vector(0, 0, 1)

Two clicks will rotate by 180 deg the moving objects.

Align the Edge(s) from selected object(s) to the last Edge selected.
- Click first to select an Edge of an object or several Edges from several objects. 
These objects will be moved.
- Click second to select an Edge to align to (the last object is fixed and will never move).
Then Click the button.

NB:
The center of rotation is the center of the bounbing box if possible or 
the center of the Edge.
if the Edge of the object selected is already aligned to the last one,
a rotation of 180 deg is applied to the object.
In this case the Axis of rotation is Z vector : Base.Vector(0, 0, 1)

Two clicks will rotate by 180 deg the moving objects.

Joint Face(s) from selected object(s) to the last Face selected.
- Click first to select a Face of an object or several Faces from several objects. 
These objects will be moved.
- Click second to select a Face to joint to (the last object is fixed and will never move).
Then Click the button.

Two clicks will rotate by 180 deg the moving objects.
This commit is contained in:
Rentlau 2015-09-02 06:47:30 +02:00
parent 80cd0eaf32
commit 5af9c6589c
3 changed files with 1667 additions and 346 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

402
WorkFeature/WFGui_2015.py
View File

@ -1,8 +1,8 @@
# -*- coding: utf-8 -*-
# Form implementation generated from reading ui file 'WFGui_2015_06_22.ui'
# Form implementation generated from reading ui file 'WFGui_2015_08_31.ui'
#
# Created: Mon Jun 22 13:51:21 2015
# Created: Mon Aug 31 22:01:38 2015
# by: PySide UI code generator 4.9.1
#
# WARNING! All changes made in this file will be lost!
@ -71,6 +71,9 @@ class Ui_Form(object):
self.radioButton_biColor.setAutoExclusive(False)
self.radioButton_biColor.setObjectName(_fromUtf8("radioButton_biColor"))
self.gridLayout_3.addWidget(self.radioButton_biColor, 1, 0, 1, 1)
self.radioButton_copy = QtGui.QRadioButton(self.groupBox_5)
self.radioButton_copy.setObjectName(_fromUtf8("radioButton_copy"))
self.gridLayout_3.addWidget(self.radioButton_copy, 2, 0, 1, 1)
self.horizontalLayout_25 = QtGui.QHBoxLayout()
self.horizontalLayout_25.setObjectName(_fromUtf8("horizontalLayout_25"))
self.label_5 = QtGui.QLabel(self.groupBox_5)
@ -81,9 +84,6 @@ class Ui_Form(object):
self.tolerance_edit.setObjectName(_fromUtf8("tolerance_edit"))
self.horizontalLayout_25.addWidget(self.tolerance_edit)
self.gridLayout_3.addLayout(self.horizontalLayout_25, 3, 0, 1, 1)
self.radioButton_copy = QtGui.QRadioButton(self.groupBox_5)
self.radioButton_copy.setObjectName(_fromUtf8("radioButton_copy"))
self.gridLayout_3.addWidget(self.radioButton_copy, 2, 0, 1, 1)
self.gridLayout_14.addWidget(self.groupBox_5, 0, 0, 1, 1)
self.gridLayout_5.addWidget(self.frame_3, 1, 0, 1, 1)
spacerItem = QtGui.QSpacerItem(20, 40, QtGui.QSizePolicy.Minimum, QtGui.QSizePolicy.Expanding)
@ -883,8 +883,12 @@ class Ui_Form(object):
self.Objects_Tab2.setEnabled(True)
self.Objects_Tab2.setMinimumSize(QtCore.QSize(0, 0))
self.Objects_Tab2.setObjectName(_fromUtf8("Objects_Tab2"))
self.gridLayout_12 = QtGui.QGridLayout(self.Objects_Tab2)
self.gridLayout_12.setObjectName(_fromUtf8("gridLayout_12"))
self.gridLayout_54 = QtGui.QGridLayout(self.Objects_Tab2)
self.gridLayout_54.setObjectName(_fromUtf8("gridLayout_54"))
self.horizontalLayout_35 = QtGui.QHBoxLayout()
self.horizontalLayout_35.setObjectName(_fromUtf8("horizontalLayout_35"))
self.verticalLayout_2 = QtGui.QVBoxLayout()
self.verticalLayout_2.setObjectName(_fromUtf8("verticalLayout_2"))
self.button_boundingboxes = QtGui.QPushButton(self.Objects_Tab2)
self.button_boundingboxes.setMaximumSize(QtCore.QSize(16777215, 16777215))
icon54 = QtGui.QIcon()
@ -892,7 +896,7 @@ class Ui_Form(object):
self.button_boundingboxes.setIcon(icon54)
self.button_boundingboxes.setIconSize(QtCore.QSize(32, 32))
self.button_boundingboxes.setObjectName(_fromUtf8("button_boundingboxes"))
self.gridLayout_12.addWidget(self.button_boundingboxes, 0, 0, 1, 1)
self.verticalLayout_2.addWidget(self.button_boundingboxes)
self.button_boundingbox = QtGui.QPushButton(self.Objects_Tab2)
self.button_boundingbox.setMaximumSize(QtCore.QSize(16777215, 16777215))
icon55 = QtGui.QIcon()
@ -900,7 +904,13 @@ class Ui_Form(object):
self.button_boundingbox.setIcon(icon55)
self.button_boundingbox.setIconSize(QtCore.QSize(32, 32))
self.button_boundingbox.setObjectName(_fromUtf8("button_boundingbox"))
self.gridLayout_12.addWidget(self.button_boundingbox, 1, 0, 1, 1)
self.verticalLayout_2.addWidget(self.button_boundingbox)
self.horizontalLayout_35.addLayout(self.verticalLayout_2)
self.checkBox_volumBB = QtGui.QCheckBox(self.Objects_Tab2)
self.checkBox_volumBB.setMaximumSize(QtCore.QSize(60, 16777215))
self.checkBox_volumBB.setObjectName(_fromUtf8("checkBox_volumBB"))
self.horizontalLayout_35.addWidget(self.checkBox_volumBB)
self.gridLayout_54.addLayout(self.horizontalLayout_35, 0, 0, 1, 1)
self.line = QtGui.QFrame(self.Objects_Tab2)
self.line.setFrameShadow(QtGui.QFrame.Plain)
self.line.setLineWidth(4)
@ -908,7 +918,7 @@ class Ui_Form(object):
self.line.setFrameShape(QtGui.QFrame.HLine)
self.line.setFrameShadow(QtGui.QFrame.Sunken)
self.line.setObjectName(_fromUtf8("line"))
self.gridLayout_12.addWidget(self.line, 2, 0, 1, 1)
self.gridLayout_54.addWidget(self.line, 1, 0, 1, 1)
self.gridLayout_6 = QtGui.QGridLayout()
self.gridLayout_6.setObjectName(_fromUtf8("gridLayout_6"))
self.button_cylinder_create = QtGui.QPushButton(self.Objects_Tab2)
@ -938,7 +948,7 @@ class Ui_Form(object):
self.length_cylinder.setMaximumSize(QtCore.QSize(60, 16777215))
self.length_cylinder.setObjectName(_fromUtf8("length_cylinder"))
self.gridLayout_6.addWidget(self.length_cylinder, 0, 2, 1, 1)
self.gridLayout_12.addLayout(self.gridLayout_6, 3, 0, 1, 1)
self.gridLayout_54.addLayout(self.gridLayout_6, 2, 0, 1, 1)
self.horizontalLayout_4 = QtGui.QHBoxLayout()
self.horizontalLayout_4.setObjectName(_fromUtf8("horizontalLayout_4"))
self.button_cube_create = QtGui.QPushButton(self.Objects_Tab2)
@ -968,7 +978,7 @@ class Ui_Form(object):
self.height_cube.setMaximumSize(QtCore.QSize(60, 16777215))
self.height_cube.setObjectName(_fromUtf8("height_cube"))
self.horizontalLayout_4.addWidget(self.height_cube)
self.gridLayout_12.addLayout(self.horizontalLayout_4, 4, 0, 1, 1)
self.gridLayout_54.addLayout(self.horizontalLayout_4, 3, 0, 1, 1)
self.horizontalLayout_19 = QtGui.QHBoxLayout()
self.horizontalLayout_19.setObjectName(_fromUtf8("horizontalLayout_19"))
self.button_sphere_create = QtGui.QPushButton(self.Objects_Tab2)
@ -988,7 +998,7 @@ class Ui_Form(object):
self.diameter_sphere.setMaximumSize(QtCore.QSize(60, 16777215))
self.diameter_sphere.setObjectName(_fromUtf8("diameter_sphere"))
self.horizontalLayout_19.addWidget(self.diameter_sphere)
self.gridLayout_12.addLayout(self.horizontalLayout_19, 5, 0, 1, 1)
self.gridLayout_54.addLayout(self.horizontalLayout_19, 4, 0, 1, 1)
self.horizontalLayout_20 = QtGui.QHBoxLayout()
self.horizontalLayout_20.setObjectName(_fromUtf8("horizontalLayout_20"))
self.button_dome_create = QtGui.QPushButton(self.Objects_Tab2)
@ -1017,7 +1027,7 @@ class Ui_Form(object):
self.diameter_dome.setMaximumSize(QtCore.QSize(60, 16777215))
self.diameter_dome.setObjectName(_fromUtf8("diameter_dome"))
self.horizontalLayout_20.addWidget(self.diameter_dome)
self.gridLayout_12.addLayout(self.horizontalLayout_20, 6, 0, 1, 1)
self.gridLayout_54.addLayout(self.horizontalLayout_20, 5, 0, 1, 1)
self.horizontalLayout_23 = QtGui.QHBoxLayout()
self.horizontalLayout_23.setObjectName(_fromUtf8("horizontalLayout_23"))
self.button_letter = QtGui.QPushButton(self.Objects_Tab2)
@ -1041,7 +1051,7 @@ class Ui_Form(object):
self.size_letter.setMaximumSize(QtCore.QSize(50, 16777215))
self.size_letter.setObjectName(_fromUtf8("size_letter"))
self.horizontalLayout_23.addWidget(self.size_letter)
self.gridLayout_12.addLayout(self.horizontalLayout_23, 7, 0, 1, 1)
self.gridLayout_54.addLayout(self.horizontalLayout_23, 6, 0, 1, 1)
self.horizontalLayout_34 = QtGui.QHBoxLayout()
self.horizontalLayout_34.setObjectName(_fromUtf8("horizontalLayout_34"))
self.button_revolve = QtGui.QPushButton(self.Objects_Tab2)
@ -1061,12 +1071,51 @@ class Ui_Form(object):
self.angle_revolve.setMaximumSize(QtCore.QSize(40, 16777215))
self.angle_revolve.setObjectName(_fromUtf8("angle_revolve"))
self.horizontalLayout_34.addWidget(self.angle_revolve)
self.gridLayout_12.addLayout(self.horizontalLayout_34, 8, 0, 1, 1)
spacerItem9 = QtGui.QSpacerItem(20, 40, QtGui.QSizePolicy.Minimum, QtGui.QSizePolicy.Expanding)
self.gridLayout_12.addItem(spacerItem9, 9, 0, 1, 1)
self.gridLayout_54.addLayout(self.horizontalLayout_34, 7, 0, 1, 1)
self.frame_5 = QtGui.QFrame(self.Objects_Tab2)
self.frame_5.setFrameShape(QtGui.QFrame.StyledPanel)
self.frame_5.setFrameShadow(QtGui.QFrame.Raised)
self.frame_5.setLineWidth(3)
self.frame_5.setObjectName(_fromUtf8("frame_5"))
self.gridLayout_53 = QtGui.QGridLayout(self.frame_5)
self.gridLayout_53.setObjectName(_fromUtf8("gridLayout_53"))
self.gridLayout_12 = QtGui.QGridLayout()
self.gridLayout_12.setObjectName(_fromUtf8("gridLayout_12"))
self.checkBox_allsubselect = QtGui.QCheckBox(self.frame_5)
self.checkBox_allsubselect.setChecked(True)
self.checkBox_allsubselect.setObjectName(_fromUtf8("checkBox_allsubselect"))
self.gridLayout_12.addWidget(self.checkBox_allsubselect, 2, 0, 1, 1)
self.transition_comboBox = QtGui.QComboBox(self.frame_5)
self.transition_comboBox.setObjectName(_fromUtf8("transition_comboBox"))
self.transition_comboBox.addItem(_fromUtf8(""))
self.transition_comboBox.addItem(_fromUtf8(""))
self.transition_comboBox.addItem(_fromUtf8(""))
self.gridLayout_12.addWidget(self.transition_comboBox, 2, 1, 1, 1)
self.checkBox_solid = QtGui.QCheckBox(self.frame_5)
self.checkBox_solid.setMinimumSize(QtCore.QSize(9, 0))
self.checkBox_solid.setMaximumSize(QtCore.QSize(60, 16777215))
self.checkBox_solid.setChecked(True)
self.checkBox_solid.setObjectName(_fromUtf8("checkBox_solid"))
self.gridLayout_12.addWidget(self.checkBox_solid, 1, 0, 1, 1)
self.radioButton_Frenet = QtGui.QRadioButton(self.frame_5)
self.radioButton_Frenet.setChecked(True)
self.radioButton_Frenet.setAutoExclusive(False)
self.radioButton_Frenet.setObjectName(_fromUtf8("radioButton_Frenet"))
self.gridLayout_12.addWidget(self.radioButton_Frenet, 1, 1, 1, 1)
self.gridLayout_53.addLayout(self.gridLayout_12, 0, 0, 1, 1)
self.button_sweep = QtGui.QPushButton(self.frame_5)
icon62 = QtGui.QIcon()
icon62.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_box.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.tabWidget.addTab(self.Objects_Tab2, icon62, _fromUtf8(""))
icon62.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_Beam.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_sweep.setIcon(icon62)
self.button_sweep.setIconSize(QtCore.QSize(32, 32))
self.button_sweep.setObjectName(_fromUtf8("button_sweep"))
self.gridLayout_53.addWidget(self.button_sweep, 1, 0, 1, 1)
self.gridLayout_54.addWidget(self.frame_5, 8, 0, 1, 1)
spacerItem9 = QtGui.QSpacerItem(17, 8, QtGui.QSizePolicy.Minimum, QtGui.QSizePolicy.Expanding)
self.gridLayout_54.addItem(spacerItem9, 9, 0, 1, 1)
icon63 = QtGui.QIcon()
icon63.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_box.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.tabWidget.addTab(self.Objects_Tab2, icon63, _fromUtf8(""))
self.Modif_Tab = QtGui.QWidget()
self.Modif_Tab.setObjectName(_fromUtf8("Modif_Tab"))
self.gridLayout_11 = QtGui.QGridLayout(self.Modif_Tab)
@ -1084,9 +1133,9 @@ class Ui_Form(object):
sizePolicy.setHeightForWidth(self.button_alignface2view.sizePolicy().hasHeightForWidth())
self.button_alignface2view.setSizePolicy(sizePolicy)
self.button_alignface2view.setMaximumSize(QtCore.QSize(220, 16777215))
icon63 = QtGui.QIcon()
icon63.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_viewAlignFace.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_alignface2view.setIcon(icon63)
icon64 = QtGui.QIcon()
icon64.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_viewAlignFace.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_alignface2view.setIcon(icon64)
self.button_alignface2view.setIconSize(QtCore.QSize(32, 32))
self.button_alignface2view.setObjectName(_fromUtf8("button_alignface2view"))
self.gridLayout_51.addWidget(self.button_alignface2view, 0, 0, 1, 1)
@ -1094,9 +1143,9 @@ class Ui_Form(object):
self.horizontalLayout_32.setObjectName(_fromUtf8("horizontalLayout_32"))
self.button_align_faces = QtGui.QPushButton(self.align_tab)
self.button_align_faces.setMaximumSize(QtCore.QSize(220, 16777215))
icon64 = QtGui.QIcon()
icon64.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_objectAlignFaces.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_align_faces.setIcon(icon64)
icon65 = QtGui.QIcon()
icon65.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_objectAlignFaces.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_align_faces.setIcon(icon65)
self.button_align_faces.setIconSize(QtCore.QSize(32, 32))
self.button_align_faces.setObjectName(_fromUtf8("button_align_faces"))
self.horizontalLayout_32.addWidget(self.button_align_faces)
@ -1115,9 +1164,9 @@ class Ui_Form(object):
self.horizontalLayout_33.setObjectName(_fromUtf8("horizontalLayout_33"))
self.button_align_edges = QtGui.QPushButton(self.align_tab)
self.button_align_edges.setMaximumSize(QtCore.QSize(220, 16777215))
icon65 = QtGui.QIcon()
icon65.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_objectAlignAxes.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_align_edges.setIcon(icon65)
icon66 = QtGui.QIcon()
icon66.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_objectAlignAxes.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_align_edges.setIcon(icon66)
self.button_align_edges.setIconSize(QtCore.QSize(32, 32))
self.button_align_edges.setObjectName(_fromUtf8("button_align_edges"))
self.horizontalLayout_33.addWidget(self.button_align_edges)
@ -1132,15 +1181,22 @@ class Ui_Form(object):
self.angle_align_edges.setObjectName(_fromUtf8("angle_align_edges"))
self.horizontalLayout_33.addWidget(self.angle_align_edges)
self.gridLayout_51.addLayout(self.horizontalLayout_33, 2, 0, 1, 1)
spacerItem10 = QtGui.QSpacerItem(20, 40, QtGui.QSizePolicy.Minimum, QtGui.QSizePolicy.Expanding)
self.gridLayout_51.addItem(spacerItem10, 5, 0, 1, 1)
self.button_joint_points = QtGui.QPushButton(self.align_tab)
icon66 = QtGui.QIcon()
icon66.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_objectJointPoints.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_joint_points.setIcon(icon66)
icon67 = QtGui.QIcon()
icon67.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_objectJointPoints.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_joint_points.setIcon(icon67)
self.button_joint_points.setIconSize(QtCore.QSize(32, 32))
self.button_joint_points.setObjectName(_fromUtf8("button_joint_points"))
self.gridLayout_51.addWidget(self.button_joint_points, 3, 0, 1, 1)
spacerItem10 = QtGui.QSpacerItem(20, 40, QtGui.QSizePolicy.Minimum, QtGui.QSizePolicy.Expanding)
self.gridLayout_51.addItem(spacerItem10, 4, 0, 1, 1)
self.button_joint_faces = QtGui.QPushButton(self.align_tab)
icon68 = QtGui.QIcon()
icon68.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_objectJointFaces.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_joint_faces.setIcon(icon68)
self.button_joint_faces.setIconSize(QtCore.QSize(32, 32))
self.button_joint_faces.setObjectName(_fromUtf8("button_joint_faces"))
self.gridLayout_51.addWidget(self.button_joint_faces, 4, 0, 1, 1)
self.tabWidget_2.addTab(self.align_tab, _fromUtf8(""))
self.cut_tab = QtGui.QWidget()
self.cut_tab.setObjectName(_fromUtf8("cut_tab"))
@ -1307,9 +1363,9 @@ class Ui_Form(object):
self.ObjRot_button_select_axis.setMaximumSize(QtCore.QSize(80, 16777215))
self.ObjRot_button_select_axis.setObjectName(_fromUtf8("ObjRot_button_select_axis"))
self.gridLayout_21.addWidget(self.ObjRot_button_select_axis, 1, 0, 1, 1)
icon67 = QtGui.QIcon()
icon67.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_rotationAxis.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.tabWidget_3.addTab(self.tab_8, icon67, _fromUtf8(""))
icon69 = QtGui.QIcon()
icon69.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_rotationAxis.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.tabWidget_3.addTab(self.tab_8, icon69, _fromUtf8(""))
self.tab_9 = QtGui.QWidget()
self.tab_9.setObjectName(_fromUtf8("tab_9"))
self.gridLayout_23 = QtGui.QGridLayout(self.tab_9)
@ -1336,9 +1392,9 @@ class Ui_Form(object):
self.ObjRot_button_select_center.setMaximumSize(QtCore.QSize(80, 16777215))
self.ObjRot_button_select_center.setObjectName(_fromUtf8("ObjRot_button_select_center"))
self.gridLayout_23.addWidget(self.ObjRot_button_select_center, 1, 0, 1, 1)
icon68 = QtGui.QIcon()
icon68.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_rotationPoint.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.tabWidget_3.addTab(self.tab_9, icon68, _fromUtf8(""))
icon70 = QtGui.QIcon()
icon70.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_rotationPoint.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.tabWidget_3.addTab(self.tab_9, icon70, _fromUtf8(""))
self.gridLayout_50.addWidget(self.tabWidget_3, 1, 0, 1, 1)
self.groupBox_2 = QtGui.QGroupBox(self.frame)
self.groupBox_2.setMinimumSize(QtCore.QSize(150, 67))
@ -1374,9 +1430,9 @@ class Ui_Form(object):
self.ObjRot_button_select_angle.setMaximumSize(QtCore.QSize(80, 16777215))
self.ObjRot_button_select_angle.setObjectName(_fromUtf8("ObjRot_button_select_angle"))
self.gridLayout_24.addWidget(self.ObjRot_button_select_angle, 0, 0, 1, 1)
icon69 = QtGui.QIcon()
icon69.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_click.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.tabWidget_5.addTab(self.tab_10, icon69, _fromUtf8(""))
icon71 = QtGui.QIcon()
icon71.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_click.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.tabWidget_5.addTab(self.tab_10, icon71, _fromUtf8(""))
self.gridLayout_29.addWidget(self.tabWidget_5, 0, 0, 1, 1)
self.horizontalLayout_13 = QtGui.QHBoxLayout()
self.horizontalLayout_13.setObjectName(_fromUtf8("horizontalLayout_13"))
@ -1441,7 +1497,7 @@ class Ui_Form(object):
self.ObjTrans_spin.setButtonSymbols(QtGui.QAbstractSpinBox.NoButtons)
self.ObjTrans_spin.setKeyboardTracking(False)
self.ObjTrans_spin.setMinimum(1)
self.ObjTrans_spin.setMaximum(10)
self.ObjTrans_spin.setMaximum(20)
self.ObjTrans_spin.setSingleStep(1)
self.ObjTrans_spin.setProperty("value", 1)
self.ObjTrans_spin.setObjectName(_fromUtf8("ObjTrans_spin"))
@ -1525,9 +1581,9 @@ class Ui_Form(object):
self.gridLayout_27.addLayout(self.gridLayout_41, 2, 0, 1, 1)
self.gridLayout_26.addLayout(self.gridLayout_27, 2, 0, 1, 1)
self.gridLayout_15.addWidget(self.groupBox_3, 0, 0, 1, 1)
icon70 = QtGui.QIcon()
icon70.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_startPoint.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.tabWidget_4.addTab(self.tab_5, icon70, _fromUtf8(""))
icon72 = QtGui.QIcon()
icon72.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_startPoint.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.tabWidget_4.addTab(self.tab_5, icon72, _fromUtf8(""))
self.tab_6 = QtGui.QWidget()
self.tab_6.setObjectName(_fromUtf8("tab_6"))
self.gridLayout_42 = QtGui.QGridLayout(self.tab_6)
@ -1602,9 +1658,9 @@ class Ui_Form(object):
self.gridLayout_44.addLayout(self.gridLayout_47, 0, 0, 1, 1)
self.gridLayout_43.addLayout(self.gridLayout_44, 2, 0, 1, 1)
self.gridLayout_42.addWidget(self.groupBox_4, 0, 0, 1, 1)
icon71 = QtGui.QIcon()
icon71.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_endPoint.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.tabWidget_4.addTab(self.tab_6, icon71, _fromUtf8(""))
icon73 = QtGui.QIcon()
icon73.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_endPoint.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.tabWidget_4.addTab(self.tab_6, icon73, _fromUtf8(""))
self.gridLayout_48.addWidget(self.tabWidget_4, 2, 0, 1, 1)
self.horizontalLayout_16 = QtGui.QHBoxLayout()
self.horizontalLayout_16.setObjectName(_fromUtf8("horizontalLayout_16"))
@ -1638,96 +1694,96 @@ class Ui_Form(object):
sizePolicy.setHeightForWidth(self.button_alignview.sizePolicy().hasHeightForWidth())
self.button_alignview.setSizePolicy(sizePolicy)
self.button_alignview.setMaximumSize(QtCore.QSize(16777215, 16777215))
icon72 = QtGui.QIcon()
icon72.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_viewAlign.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_alignview.setIcon(icon72)
icon74 = QtGui.QIcon()
icon74.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_viewAlign.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_alignview.setIcon(icon74)
self.button_alignview.setIconSize(QtCore.QSize(32, 32))
self.button_alignview.setObjectName(_fromUtf8("button_alignview"))
self.gridLayout_13.addWidget(self.button_alignview, 0, 0, 1, 1)
spacerItem17 = QtGui.QSpacerItem(20, 40, QtGui.QSizePolicy.Minimum, QtGui.QSizePolicy.Expanding)
self.gridLayout_13.addItem(spacerItem17, 2, 0, 1, 1)
self.button_trackcamera = QtGui.QPushButton(self.View_Tab)
icon73 = QtGui.QIcon()
icon73.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_trackCamera.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_trackcamera.setIcon(icon73)
icon75 = QtGui.QIcon()
icon75.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_trackCamera.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_trackcamera.setIcon(icon75)
self.button_trackcamera.setIconSize(QtCore.QSize(32, 32))
self.button_trackcamera.setObjectName(_fromUtf8("button_trackcamera"))
self.gridLayout_13.addWidget(self.button_trackcamera, 1, 0, 1, 1)
icon74 = QtGui.QIcon()
icon74.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_view.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.tabWidget.addTab(self.View_Tab, icon74, _fromUtf8(""))
icon76 = QtGui.QIcon()
icon76.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_view.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.tabWidget.addTab(self.View_Tab, icon76, _fromUtf8(""))
self.tab_3 = QtGui.QWidget()
self.tab_3.setObjectName(_fromUtf8("tab_3"))
self.gridLayout_35 = QtGui.QGridLayout(self.tab_3)
self.gridLayout_35.setObjectName(_fromUtf8("gridLayout_35"))
self.button_isView = QtGui.QPushButton(self.tab_3)
icon75 = QtGui.QIcon()
icon75.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_FCCamera_02.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_isView.setIcon(icon75)
icon77 = QtGui.QIcon()
icon77.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_FCCamera_02.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_isView.setIcon(icon77)
self.button_isView.setIconSize(QtCore.QSize(32, 32))
self.button_isView.setObjectName(_fromUtf8("button_isView"))
self.gridLayout_35.addWidget(self.button_isView, 8, 0, 1, 1)
spacerItem18 = QtGui.QSpacerItem(20, 40, QtGui.QSizePolicy.Minimum, QtGui.QSizePolicy.Expanding)
self.gridLayout_35.addItem(spacerItem18, 9, 0, 1, 1)
self.button_isParallel = QtGui.QPushButton(self.tab_3)
icon76 = QtGui.QIcon()
icon76.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_isParallel.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_isParallel.setIcon(icon76)
self.button_isParallel.setIconSize(QtCore.QSize(32, 32))
self.button_isParallel.setObjectName(_fromUtf8("button_isParallel"))
self.gridLayout_35.addWidget(self.button_isParallel, 0, 0, 1, 1)
self.button_isCoplanar = QtGui.QPushButton(self.tab_3)
icon77 = QtGui.QIcon()
icon77.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_isCoplanar.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_isCoplanar.setIcon(icon77)
icon78 = QtGui.QIcon()
icon78.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_isCoplanar.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_isCoplanar.setIcon(icon78)
self.button_isCoplanar.setIconSize(QtCore.QSize(32, 32))
self.button_isCoplanar.setObjectName(_fromUtf8("button_isCoplanar"))
self.gridLayout_35.addWidget(self.button_isCoplanar, 2, 0, 1, 1)
self.button_isParallel = QtGui.QPushButton(self.tab_3)
icon79 = QtGui.QIcon()
icon79.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_isParallel.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_isParallel.setIcon(icon79)
self.button_isParallel.setIconSize(QtCore.QSize(32, 32))
self.button_isParallel.setObjectName(_fromUtf8("button_isParallel"))
self.gridLayout_35.addWidget(self.button_isParallel, 0, 0, 1, 1)
self.button_isAngle = QtGui.QPushButton(self.tab_3)
icon78 = QtGui.QIcon()
icon78.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_angleBetween.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_isAngle.setIcon(icon78)
icon80 = QtGui.QIcon()
icon80.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_angleBetween.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_isAngle.setIcon(icon80)
self.button_isAngle.setIconSize(QtCore.QSize(32, 32))
self.button_isAngle.setObjectName(_fromUtf8("button_isAngle"))
self.gridLayout_35.addWidget(self.button_isAngle, 4, 0, 1, 1)
self.button_isLength = QtGui.QPushButton(self.tab_3)
icon79 = QtGui.QIcon()
icon79.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_isLength.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_isLength.setIcon(icon79)
icon81 = QtGui.QIcon()
icon81.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_isLength.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_isLength.setIcon(icon81)
self.button_isLength.setIconSize(QtCore.QSize(32, 32))
self.button_isLength.setObjectName(_fromUtf8("button_isLength"))
self.gridLayout_35.addWidget(self.button_isLength, 6, 0, 1, 1)
self.button_isPerpendicular = QtGui.QPushButton(self.tab_3)
icon80 = QtGui.QIcon()
icon80.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_isPerpendicular.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_isPerpendicular.setIcon(icon80)
self.button_isPerpendicular.setIconSize(QtCore.QSize(32, 32))
self.button_isPerpendicular.setObjectName(_fromUtf8("button_isPerpendicular"))
self.gridLayout_35.addWidget(self.button_isPerpendicular, 1, 0, 1, 1)
self.button_isDistance = QtGui.QPushButton(self.tab_3)
icon81 = QtGui.QIcon()
icon81.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_distanceBetween.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_isDistance.setIcon(icon81)
icon82 = QtGui.QIcon()
icon82.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_distanceBetween.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_isDistance.setIcon(icon82)
self.button_isDistance.setIconSize(QtCore.QSize(32, 32))
self.button_isDistance.setObjectName(_fromUtf8("button_isDistance"))
self.gridLayout_35.addWidget(self.button_isDistance, 5, 0, 1, 1)
self.button_isPerpendicular = QtGui.QPushButton(self.tab_3)
icon83 = QtGui.QIcon()
icon83.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_isPerpendicular.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_isPerpendicular.setIcon(icon83)
self.button_isPerpendicular.setIconSize(QtCore.QSize(32, 32))
self.button_isPerpendicular.setObjectName(_fromUtf8("button_isPerpendicular"))
self.gridLayout_35.addWidget(self.button_isPerpendicular, 1, 0, 1, 1)
self.button_isClearance = QtGui.QPushButton(self.tab_3)
icon82 = QtGui.QIcon()
icon82.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_isClearance.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_isClearance.setIcon(icon82)
icon84 = QtGui.QIcon()
icon84.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_isClearance.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_isClearance.setIcon(icon84)
self.button_isClearance.setIconSize(QtCore.QSize(32, 32))
self.button_isClearance.setObjectName(_fromUtf8("button_isClearance"))
self.gridLayout_35.addWidget(self.button_isClearance, 3, 0, 1, 1)
self.button_isArea = QtGui.QPushButton(self.tab_3)
icon83 = QtGui.QIcon()
icon83.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_isArea.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_isArea.setIcon(icon83)
icon85 = QtGui.QIcon()
icon85.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_isArea.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.button_isArea.setIcon(icon85)
self.button_isArea.setIconSize(QtCore.QSize(32, 32))
self.button_isArea.setObjectName(_fromUtf8("button_isArea"))
self.gridLayout_35.addWidget(self.button_isArea, 7, 0, 1, 1)
icon84 = QtGui.QIcon()
icon84.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_check.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.tabWidget.addTab(self.tab_3, icon84, _fromUtf8(""))
icon86 = QtGui.QIcon()
icon86.addPixmap(QtGui.QPixmap(_fromUtf8("icons:WF_check.svg")), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.tabWidget.addTab(self.tab_3, icon86, _fromUtf8(""))
self.gridLayout_30.addWidget(self.tabWidget, 0, 0, 1, 1)
self.tabWidget_0.addTab(self.tab_2, _fromUtf8(""))
self.gridLayout_9.addWidget(self.tabWidget_0, 0, 0, 1, 1)
@ -1749,7 +1805,8 @@ class Ui_Form(object):
self.tabWidget_0.setCurrentIndex(0)
self.tabWidget.setCurrentIndex(0)
self.point_loc_comboBox.setCurrentIndex(1)
self.tabWidget_2.setCurrentIndex(2)
self.transition_comboBox.setCurrentIndex(2)
self.tabWidget_2.setCurrentIndex(0)
self.tabWidget_3.setCurrentIndex(0)
self.ObjRot_comboBox_axis.setCurrentIndex(0)
self.ObjRot_comboBox_center.setCurrentIndex(2)
@ -1773,6 +1830,15 @@ class Ui_Form(object):
" Arcs=Cut(Circle) \n"
"", None, QtGui.QApplication.UnicodeUTF8))
self.radioButton_biColor.setText(QtGui.QApplication.translate("Form", "Bi Color", None, QtGui.QApplication.UnicodeUTF8))
self.radioButton_copy.setToolTip(QtGui.QApplication.translate("Form", "Force the duplication of the Parent Object for the following functions:\n"
" - in \"Axis 2/2\" TAB:\n"
" Axes=(Axis,Pt,dist)\n"
" If an Edge of a Cube is selected the Cube is duplicate \n"
" with the corresponding\n"
" Edge at the defined distance from the original.\n"
" - in \"Plane\" TAB:\n"
" Plane=(Plane,dist) ", None, QtGui.QApplication.UnicodeUTF8))
self.radioButton_copy.setText(QtGui.QApplication.translate("Form", "Object copy", None, QtGui.QApplication.UnicodeUTF8))
self.label_5.setToolTip(QtGui.QApplication.translate("Form", "Change the tolerance for the following functions:\n"
" - in \"Check\" TAB:\n"
" are Parallel?\n"
@ -1785,15 +1851,6 @@ class Ui_Form(object):
" are Perpendicular?\n"
" are Coplanar?", None, QtGui.QApplication.UnicodeUTF8))
self.tolerance_edit.setText(QtGui.QApplication.translate("Form", "1e-10", None, QtGui.QApplication.UnicodeUTF8))
self.radioButton_copy.setToolTip(QtGui.QApplication.translate("Form", "Force the duplication of the Parent Object for the following functions:\n"
" - in \"Axis 2/2\" TAB:\n"
" Axes=(Axis,Pt,dist)\n"
" If an Edge of a Cube is selected the Cube is duplicate \n"
" with the corresponding\n"
" Edge at the defined distance from the original.\n"
" - in \"Plane\" TAB:\n"
" Plane=(Plane,dist) ", None, QtGui.QApplication.UnicodeUTF8))
self.radioButton_copy.setText(QtGui.QApplication.translate("Form", "Object copy", None, QtGui.QApplication.UnicodeUTF8))
self.tabWidget.setTabText(self.tabWidget.indexOf(self.Origin_Tab), QtGui.QApplication.translate("Form", "Ori. Pref.", None, QtGui.QApplication.UnicodeUTF8))
self.button_point_line_point.setToolTip(QtGui.QApplication.translate("Form", "Point(s)=(Point(s),Line(s)):\n"
"Create projection(s) of Point(s) onto Line(s).\n"
@ -1833,11 +1890,16 @@ class Ui_Form(object):
" if BBox is not toggled\n"
" This point is the MEAN location of all center of Mass (if exist) of all objects.\n"
" All center of Mass will be created too.\n"
" if BBox is toggled\n"
" \n"
"if BBox check box is toggled\n"
" This point is the center of the Global X,Y,Z bounding box of all objects.\n"
" This bounding box alway exists (especially for draft objects).\n"
" Be aware this point is not necessary the center of Mass of all Objects!", None, QtGui.QApplication.UnicodeUTF8))
self.button_object_center.setText(QtGui.QApplication.translate("Form", "Object(s) Center", None, QtGui.QApplication.UnicodeUTF8))
self.checkBox_object_center.setToolTip(QtGui.QApplication.translate("Form", "if BBox check box is toggled\n"
" This point is the center of the Global X,Y,Z bounding box of all objects.\n"
" This bounding box alway exists (especially for draft objects).\n"
" Be aware this point is not necessary the center of Mass of all Objects!", None, QtGui.QApplication.UnicodeUTF8))
self.checkBox_object_center.setText(QtGui.QApplication.translate("Form", "BBox", None, QtGui.QApplication.UnicodeUTF8))
self.tabWidget.setTabText(self.tabWidget.indexOf(self.Point_Tab1), QtGui.QApplication.translate("Form", "Point 1/2", None, QtGui.QApplication.UnicodeUTF8))
self.tabWidget.setTabToolTip(self.tabWidget.indexOf(self.Point_Tab1), QtGui.QApplication.translate("Form", "Point", None, QtGui.QApplication.UnicodeUTF8))
@ -1912,10 +1974,17 @@ class Ui_Form(object):
"NB: Axes are created on both sides of the Plane\n"
"The extension is 10 units by defaut but must be changed if needed.", None, QtGui.QApplication.UnicodeUTF8))
self.button_plane_axis.setText(QtGui.QApplication.translate("Form", "Plane(s) Axes", None, QtGui.QApplication.UnicodeUTF8))
self.button_face_normal.setToolTip(QtGui.QApplication.translate("Form", "Create a normal Axis at click location of a Face.\n"
"Click first in the view to select and object,\n"
"then push the button, \n"
"then click on a location on the selected object.", None, QtGui.QApplication.UnicodeUTF8))
self.button_face_normal.setToolTip(QtGui.QApplication.translate("Form", "Create a normal Axis of a Face.\n"
"To create a Normal at click location on a Face:\n"
"- Click first in the view to select and object,\n"
"- then push the button, \n"
"- then click on a location on the selected Face.\n"
"or\n"
"To create several Normal of the face:\n"
"- Click first in the view to select and object,\n"
"- then select one or several points of the face\n"
"- then push the button.\n"
"(These selections can also be done into the Combined View)", None, QtGui.QApplication.UnicodeUTF8))
self.button_face_normal.setText(QtGui.QApplication.translate("Form", "Face Normal", None, QtGui.QApplication.UnicodeUTF8))
self.extension_face_normal.setToolTip(QtGui.QApplication.translate("Form", "Length of external part of the (Normal) Axis.\n"
" If zero In case of cylinder axis the extension will be a percentage of the object length.\n"
@ -2173,10 +2242,15 @@ class Ui_Form(object):
self.extension_plane.setToolTip(QtGui.QApplication.translate("Form", "Extension of the Plane in each dimension in percentage.", None, QtGui.QApplication.UnicodeUTF8))
self.extension_plane.setText(QtGui.QApplication.translate("Form", "50.0", None, QtGui.QApplication.UnicodeUTF8))
self.tabWidget.setTabText(self.tabWidget.indexOf(self.Plane_Tab11), QtGui.QApplication.translate("Form", "Plane 2/2", None, QtGui.QApplication.UnicodeUTF8))
self.button_boundingboxes.setToolTip(QtGui.QApplication.translate("Form", "Create bounding boxes around each of selected object(s).", None, QtGui.QApplication.UnicodeUTF8))
self.button_boundingboxes.setToolTip(QtGui.QApplication.translate("Form", "Create bounding boxes around each of selected object(s).\n"
"6 rectangles at the limits of each bounding boxes will be created.", None, QtGui.QApplication.UnicodeUTF8))
self.button_boundingboxes.setText(QtGui.QApplication.translate("Form", "Bounding Box(es)", None, QtGui.QApplication.UnicodeUTF8))
self.button_boundingbox.setToolTip(QtGui.QApplication.translate("Form", "Create one bounding box around all of selected object(s).", None, QtGui.QApplication.UnicodeUTF8))
self.button_boundingbox.setToolTip(QtGui.QApplication.translate("Form", "Create one bounding box around all of selected object(s).\n"
"6 rectangles at the limits of the bounding box will be created.", None, QtGui.QApplication.UnicodeUTF8))
self.button_boundingbox.setText(QtGui.QApplication.translate("Form", "Bounding Box", None, QtGui.QApplication.UnicodeUTF8))
self.checkBox_volumBB.setToolTip(QtGui.QApplication.translate("Form", "if \"Vol.\" is toggled:\n"
" In Addition of rectangles, the Bounding box will be also created as a Volume.", None, QtGui.QApplication.UnicodeUTF8))
self.checkBox_volumBB.setText(QtGui.QApplication.translate("Form", "Vol.", None, QtGui.QApplication.UnicodeUTF8))
self.button_cylinder_create.setToolTip(QtGui.QApplication.translate("Form", "Create a Cylinder aligned on Axes:\n"
"- First select one or several couple of ( Axis and a Ref. Point). \n"
"- Define Diameter and Length if needed.\n"
@ -2259,9 +2333,51 @@ class Ui_Form(object):
self.button_revolve.setText(QtGui.QApplication.translate("Form", "Revolve", None, QtGui.QApplication.UnicodeUTF8))
self.angle_revolve.setToolTip(QtGui.QApplication.translate("Form", "Angle of the revolution in degrees.", None, QtGui.QApplication.UnicodeUTF8))
self.angle_revolve.setText(QtGui.QApplication.translate("Form", "360", None, QtGui.QApplication.UnicodeUTF8))
self.checkBox_allsubselect.setToolTip(QtGui.QApplication.translate("Form", "if \"All\" is toggled:\n"
" All the wires of the Trajectory selected will be considered.\n"
"\n"
"Untoggled if you select a Skecth with several curves and you want to process\n"
"only the one subselected.", None, QtGui.QApplication.UnicodeUTF8))
self.checkBox_allsubselect.setText(QtGui.QApplication.translate("Form", "All", None, QtGui.QApplication.UnicodeUTF8))
self.transition_comboBox.setToolTip(QtGui.QApplication.translate("Form", "For the function :\n"
"makePipeShell(shapeList,[isSolid,isFrenet,transition])\n"
"Select a Transition option in case of trajectory with several wires; Transition can be:\n"
"# 0 (default), 1 (right corners) or 2 (rounded corners).", None, QtGui.QApplication.UnicodeUTF8))
self.transition_comboBox.setItemText(0, QtGui.QApplication.translate("Form", "No Transition", None, QtGui.QApplication.UnicodeUTF8))
self.transition_comboBox.setItemText(1, QtGui.QApplication.translate("Form", "Right corners", None, QtGui.QApplication.UnicodeUTF8))
self.transition_comboBox.setItemText(2, QtGui.QApplication.translate("Form", "Rounded corners", None, QtGui.QApplication.UnicodeUTF8))
self.checkBox_solid.setToolTip(QtGui.QApplication.translate("Form", "if \"Solid\" is toggled:\n"
" The Beam sweep will generate a solid with a closed selected wire as Section.\n"
"If this check box is toggle off:\n"
" Or if the Section wire is not closed, only a shell will be created.", None, QtGui.QApplication.UnicodeUTF8))
self.checkBox_solid.setText(QtGui.QApplication.translate("Form", "Solid", None, QtGui.QApplication.UnicodeUTF8))
self.radioButton_Frenet.setToolTip(QtGui.QApplication.translate("Form", "Force the \"isFrenet\" parameter to True for the function :\n"
"makePipeShell(shapeList,[isSolid,isFrenet,transition])\n"
"", None, QtGui.QApplication.UnicodeUTF8))
self.radioButton_Frenet.setText(QtGui.QApplication.translate("Form", "isFrenet", None, QtGui.QApplication.UnicodeUTF8))
self.button_sweep.setToolTip(QtGui.QApplication.translate("Form", "Section Sweep:\n"
"# Make a loft defined by a list of profiles along a wire.\n"
"Will extrude/sweep a Section along a Trajectory like sweep from Part Workbench but:\n"
"- the Section center (of Mass) is move at the first point of the Trajectory and;\n"
"- the \"plane\" of the Section is rotate to be perpendicular to the Trajectory.\n"
"\n"
"- Select first one Section wire (Closed wire will generate volumes by default)\n"
"(This Section can be a compound from sketch to realize \"tube\")\n"
"- Select one or several wire(s) as Trajectory(ies)\n"
"- Then push this button\n"
"\n"
"NB: You can change first:\n"
"- Solid option (if toggled will generate a solid for Closed wire Section only) \n"
"- isFrenet option\n"
"- All option (means if the trajectory selected is a compound, all sub wires will be used for the sweep)\n"
"- Transition Option (Select a Transition option in case of trajectory with several wires; Transition can be:\n"
"# 0 (default), 1 (right corners) or 2 (rounded corners).)\n"
"", None, QtGui.QApplication.UnicodeUTF8))
self.button_sweep.setText(QtGui.QApplication.translate("Form", "Section Sweep", None, QtGui.QApplication.UnicodeUTF8))
self.tabWidget.setTabText(self.tabWidget.indexOf(self.Objects_Tab2), QtGui.QApplication.translate("Form", "Object", None, QtGui.QApplication.UnicodeUTF8))
self.button_alignface2view.setToolTip(QtGui.QApplication.translate("Form", "Align the face of selected object(s) to the actual view Plane.\n"
" - Click first to select a Face of one or several objects.\n"
"These objects will be moved not the point of view.\n"
"Then Click the button.\n"
"\n"
"NB:\n"
@ -2271,11 +2387,15 @@ class Ui_Form(object):
" if the Face of the object selected is already aligned to the view Plane,\n"
" a rotation of 180 deg is applied to the object.\n"
" In this case the Axis of rotation is Z vector : Base.Vector(0, 0, 1)\n"
"\n"
" Two clicks will rotate by 180 deg the moving objects.\n"
"\n"
"", None, QtGui.QApplication.UnicodeUTF8))
self.button_alignface2view.setText(QtGui.QApplication.translate("Form", "Align Face to View", None, QtGui.QApplication.UnicodeUTF8))
self.button_align_faces.setToolTip(QtGui.QApplication.translate("Form", "Align the Face(s) from selected object(s) to the last Face selected.\n"
" - Click first to select a Face of an object or several Faces from several objects. \n"
" - Click second to select a Face to align to.\n"
"These objects will be moved.\n"
" - Click second to select a Face to align to (the last object is fixed and will never move).\n"
"Then Click the button.\n"
"\n"
"NB:\n"
@ -2284,13 +2404,17 @@ class Ui_Form(object):
" \n"
" if the Face of the object selected is already aligned to the last one,\n"
" a rotation of 180 deg is applied to the object.\n"
" In this case the Axis of rotation is Z vector : Base.Vector(0, 0, 1)", None, QtGui.QApplication.UnicodeUTF8))
" In this case the Axis of rotation is Z vector : Base.Vector(0, 0, 1)\n"
"\n"
" Two clicks will rotate by 180 deg the moving objects.\n"
"", None, QtGui.QApplication.UnicodeUTF8))
self.button_align_faces.setText(QtGui.QApplication.translate("Form", "Align Faces", None, QtGui.QApplication.UnicodeUTF8))
self.angle_align_faces.setToolTip(QtGui.QApplication.translate("Form", "This Angle (in degrees) will be added to the angle needed to align Faces.", None, QtGui.QApplication.UnicodeUTF8))
self.angle_align_faces.setText(QtGui.QApplication.translate("Form", "0.0", None, QtGui.QApplication.UnicodeUTF8))
self.button_align_edges.setToolTip(QtGui.QApplication.translate("Form", "Align the Edge(s) from selected object(s) to the last Edge selected.\n"
" - Click first to select an Edge of an object or several Edges from several objects. \n"
" - Click second to select an Edge to align to.\n"
"These objects will be moved.\n"
" - Click second to select an Edge to align to (the last object is fixed and will never move).\n"
"Then Click the button.\n"
"\n"
"NB:\n"
@ -2299,16 +2423,30 @@ class Ui_Form(object):
" \n"
" if the Edge of the object selected is already aligned to the last one,\n"
" a rotation of 180 deg is applied to the object.\n"
" In this case the Axis of rotation is Z vector : Base.Vector(0, 0, 1)", None, QtGui.QApplication.UnicodeUTF8))
" In this case the Axis of rotation is Z vector : Base.Vector(0, 0, 1)\n"
"\n"
" Two clicks will rotate by 180 deg the moving objects.\n"
"", None, QtGui.QApplication.UnicodeUTF8))
self.button_align_edges.setText(QtGui.QApplication.translate("Form", "Align Edges", None, QtGui.QApplication.UnicodeUTF8))
self.angle_align_edges.setToolTip(QtGui.QApplication.translate("Form", "This Angle (in degrees) will be added to the angle needed to align Edges.", None, QtGui.QApplication.UnicodeUTF8))
self.angle_align_edges.setText(QtGui.QApplication.translate("Form", "0.0", None, QtGui.QApplication.UnicodeUTF8))
self.button_joint_points.setToolTip(QtGui.QApplication.translate("Form", "Joint Point(s) from selected object(s) to the last Point selected.\n"
" - Click first to select a Point of an object or several Points from several objects. \n"
" - Click second to select an Point to joint to.\n"
" - Click first to select a Point of an object or several Points from several objects.\n"
"These objects will be moved. \n"
" - Click second to select an Point to joint to (the last object is fixed and will never move).\n"
"Then Click the button.\n"
"\n"
"", None, QtGui.QApplication.UnicodeUTF8))
self.button_joint_points.setText(QtGui.QApplication.translate("Form", "Joint Points", None, QtGui.QApplication.UnicodeUTF8))
self.button_joint_faces.setToolTip(QtGui.QApplication.translate("Form", "Joint Face(s) from selected object(s) to the last Face selected.\n"
" - Click first to select a Face of an object or several Faces from several objects. \n"
"These objects will be moved.\n"
" - Click second to select a Face to joint to (the last object is fixed and will never move).\n"
"Then Click the button.\n"
"\n"
" Two clicks will rotate by 180 deg the moving objects.\n"
"", None, QtGui.QApplication.UnicodeUTF8))
self.button_joint_faces.setText(QtGui.QApplication.translate("Form", "Joint Faces", None, QtGui.QApplication.UnicodeUTF8))
self.tabWidget_2.setTabText(self.tabWidget_2.indexOf(self.align_tab), QtGui.QApplication.translate("Form", "Align", None, QtGui.QApplication.UnicodeUTF8))
self.groupBox_6.setTitle(QtGui.QApplication.translate("Form", "Object", None, QtGui.QApplication.UnicodeUTF8))
self.button_cut_select_object.setToolTip(QtGui.QApplication.translate("Form", "Select the Object to cut:\n"
@ -2486,18 +2624,18 @@ class Ui_Form(object):
"The returned value is the value provided \n"
"by the function getCameraOrientation().", None, QtGui.QApplication.UnicodeUTF8))
self.button_isView.setText(QtGui.QApplication.translate("Form", "View ?", None, QtGui.QApplication.UnicodeUTF8))
self.button_isParallel.setToolTip(QtGui.QApplication.translate("Form", "Check if two faces or two Edges are Parallel:\n"
"- Select the 2 faces/planes or 2 Edges/Lines and\n"
"Click this button\n"
"\n"
"NB: You can change the tolerance in \"Ori. Pref.\" TAB", None, QtGui.QApplication.UnicodeUTF8))
self.button_isParallel.setText(QtGui.QApplication.translate("Form", "are Parallel ?", None, QtGui.QApplication.UnicodeUTF8))
self.button_isCoplanar.setToolTip(QtGui.QApplication.translate("Form", "Check if two faces or two Edges are Coplanar:\n"
"- Select the 2 faces/planes or 2 Edges/Lines and\n"
"Click this button\n"
"\n"
"NB: You can change the tolerance in \"Ori. Pref.\" TAB", None, QtGui.QApplication.UnicodeUTF8))
self.button_isCoplanar.setText(QtGui.QApplication.translate("Form", "are Coplanar ?", None, QtGui.QApplication.UnicodeUTF8))
self.button_isParallel.setToolTip(QtGui.QApplication.translate("Form", "Check if two faces or two Edges are Parallel:\n"
"- Select the 2 faces/planes or 2 Edges/Lines and\n"
"Click this button\n"
"\n"
"NB: You can change the tolerance in \"Ori. Pref.\" TAB", None, QtGui.QApplication.UnicodeUTF8))
self.button_isParallel.setText(QtGui.QApplication.translate("Form", "are Parallel ?", None, QtGui.QApplication.UnicodeUTF8))
self.button_isAngle.setToolTip(QtGui.QApplication.translate("Form", "Check for two Edges/Planes angle:\n"
"Angle measurement between two Edges or two Planes\n"
"- Select the 2 Edges and\n"
@ -2518,18 +2656,18 @@ class Ui_Form(object):
"Click this button\n"
" ", None, QtGui.QApplication.UnicodeUTF8))
self.button_isLength.setText(QtGui.QApplication.translate("Form", "Length ?", None, QtGui.QApplication.UnicodeUTF8))
self.button_isPerpendicular.setToolTip(QtGui.QApplication.translate("Form", "Check if two faces or two Edges are Perpendicular:\n"
"- Select the 2 faces/planes or 2 Edges/Lines and\n"
"Click this button\n"
"\n"
"NB: You can change the tolerance in \"Ori. Pref.\" TAB", None, QtGui.QApplication.UnicodeUTF8))
self.button_isPerpendicular.setText(QtGui.QApplication.translate("Form", "are Perpendicular ?", None, QtGui.QApplication.UnicodeUTF8))
self.button_isDistance.setToolTip(QtGui.QApplication.translate("Form", "Check for two Points distance:\n"
"Distances measurement and Delta values (on main Axes) between two Points\n"
"- Select the 2 Points and\n"
"Click this button\n"
" ", None, QtGui.QApplication.UnicodeUTF8))
self.button_isDistance.setText(QtGui.QApplication.translate("Form", "Distance ?", None, QtGui.QApplication.UnicodeUTF8))
self.button_isPerpendicular.setToolTip(QtGui.QApplication.translate("Form", "Check if two faces or two Edges are Perpendicular:\n"
"- Select the 2 faces/planes or 2 Edges/Lines and\n"
"Click this button\n"
"\n"
"NB: You can change the tolerance in \"Ori. Pref.\" TAB", None, QtGui.QApplication.UnicodeUTF8))
self.button_isPerpendicular.setText(QtGui.QApplication.translate("Form", "are Perpendicular ?", None, QtGui.QApplication.UnicodeUTF8))
self.button_isClearance.setToolTip(QtGui.QApplication.translate("Form", "Check for two Objects Clearance distance:\n"
"Quick measurements between parallel faces and similarly placed objects\n"
"- Select the 2 Objects and\n"

517
WorkFeature/WFGui_2015.ui
View File

@ -144,6 +144,23 @@
</property>
</widget>
</item>
<item row="2" column="0">
<widget class="QRadioButton" name="radioButton_copy">
<property name="toolTip">
<string>Force the duplication of the Parent Object for the following functions:
- in &quot;Axis 2/2&quot; TAB:
Axes=(Axis,Pt,dist)
If an Edge of a Cube is selected the Cube is duplicate
with the corresponding
Edge at the defined distance from the original.
- in &quot;Plane&quot; TAB:
Plane=(Plane,dist) </string>
</property>
<property name="text">
<string>Object copy</string>
</property>
</widget>
</item>
<item row="3" column="0">
<layout class="QHBoxLayout" name="horizontalLayout_25">
<item>
@ -182,23 +199,6 @@
</item>
</layout>
</item>
<item row="2" column="0">
<widget class="QRadioButton" name="radioButton_copy">
<property name="toolTip">
<string>Force the duplication of the Parent Object for the following functions:
- in &quot;Axis 2/2&quot; TAB:
Axes=(Axis,Pt,dist)
If an Edge of a Cube is selected the Cube is duplicate
with the corresponding
Edge at the defined distance from the original.
- in &quot;Plane&quot; TAB:
Plane=(Plane,dist) </string>
</property>
<property name="text">
<string>Object copy</string>
</property>
</widget>
</item>
</layout>
</widget>
</item>
@ -469,7 +469,8 @@ The Vector TC is perpendicular to the plane.</string>
if BBox is not toggled
This point is the MEAN location of all center of Mass (if exist) of all objects.
All center of Mass will be created too.
if BBox is toggled
if BBox check box is toggled
This point is the center of the Global X,Y,Z bounding box of all objects.
This bounding box alway exists (especially for draft objects).
Be aware this point is not necessary the center of Mass of all Objects!</string>
@ -491,6 +492,12 @@ The Vector TC is perpendicular to the plane.</string>
</item>
<item>
<widget class="QCheckBox" name="checkBox_object_center">
<property name="toolTip">
<string>if BBox check box is toggled
This point is the center of the Global X,Y,Z bounding box of all objects.
This bounding box alway exists (especially for draft objects).
Be aware this point is not necessary the center of Mass of all Objects!</string>
</property>
<property name="text">
<string>BBox</string>
</property>
@ -1021,10 +1028,17 @@ The extension is 10 units by defaut but must be changed if needed.</string>
</size>
</property>
<property name="toolTip">
<string>Create a normal Axis at click location of a Face.
Click first in the view to select and object,
then push the button,
then click on a location on the selected object.</string>
<string>Create a normal Axis of a Face.
To create a Normal at click location on a Face:
- Click first in the view to select and object,
- then push the button,
- then click on a location on the selected Face.
or
To create several Normal of the face:
- Click first in the view to select and object,
- then select one or several points of the face
- then push the button.
(These selections can also be done into the Combined View)</string>
</property>
<property name="text">
<string>Face Normal</string>
@ -2691,60 +2705,87 @@ NB:
<attribute name="title">
<string>Object</string>
</attribute>
<layout class="QGridLayout" name="gridLayout_12">
<layout class="QGridLayout" name="gridLayout_54">
<item row="0" column="0">
<widget class="QPushButton" name="button_boundingboxes">
<property name="maximumSize">
<size>
<width>16777215</width>
<height>16777215</height>
</size>
</property>
<property name="toolTip">
<string>Create bounding boxes around each of selected object(s).</string>
</property>
<property name="text">
<string>Bounding Box(es)</string>
</property>
<property name="icon">
<iconset>
<normaloff>../../../../../../../../home/laurent/Documents/03_Plans/Python/Icons/WF_boundingBoxes.svg</normaloff>../../../../../../../../home/laurent/Documents/03_Plans/Python/Icons/WF_boundingBoxes.svg</iconset>
</property>
<property name="iconSize">
<size>
<width>32</width>
<height>32</height>
</size>
</property>
</widget>
<layout class="QHBoxLayout" name="horizontalLayout_35">
<item>
<layout class="QVBoxLayout" name="verticalLayout_2">
<item>
<widget class="QPushButton" name="button_boundingboxes">
<property name="maximumSize">
<size>
<width>16777215</width>
<height>16777215</height>
</size>
</property>
<property name="toolTip">
<string>Create bounding boxes around each of selected object(s).
6 rectangles at the limits of each bounding boxes will be created.</string>
</property>
<property name="text">
<string>Bounding Box(es)</string>
</property>
<property name="icon">
<iconset>
<normaloff>../../../../../../../../home/laurent/Documents/03_Plans/Python/Icons/WF_boundingBoxes.svg</normaloff>../../../../../../../../home/laurent/Documents/03_Plans/Python/Icons/WF_boundingBoxes.svg</iconset>
</property>
<property name="iconSize">
<size>
<width>32</width>
<height>32</height>
</size>
</property>
</widget>
</item>
<item>
<widget class="QPushButton" name="button_boundingbox">
<property name="maximumSize">
<size>
<width>16777215</width>
<height>16777215</height>
</size>
</property>
<property name="toolTip">
<string>Create one bounding box around all of selected object(s).
6 rectangles at the limits of the bounding box will be created.</string>
</property>
<property name="text">
<string>Bounding Box</string>
</property>
<property name="icon">
<iconset>
<normaloff>../../../../../../../../home/laurent/Documents/03_Plans/Python/Icons/WF_boundingBox.svg</normaloff>../../../../../../../../home/laurent/Documents/03_Plans/Python/Icons/WF_boundingBox.svg</iconset>
</property>
<property name="iconSize">
<size>
<width>32</width>
<height>32</height>
</size>
</property>
</widget>
</item>
</layout>
</item>
<item>
<widget class="QCheckBox" name="checkBox_volumBB">
<property name="maximumSize">
<size>
<width>60</width>
<height>16777215</height>
</size>
</property>
<property name="toolTip">
<string>if &quot;Vol.&quot; is toggled:
In Addition of rectangles, the Bounding box will be also created as a Volume.</string>
</property>
<property name="text">
<string>Vol.</string>
</property>
</widget>
</item>
</layout>
</item>
<item row="1" column="0">
<widget class="QPushButton" name="button_boundingbox">
<property name="maximumSize">
<size>
<width>16777215</width>
<height>16777215</height>
</size>
</property>
<property name="toolTip">
<string>Create one bounding box around all of selected object(s).</string>
</property>
<property name="text">
<string>Bounding Box</string>
</property>
<property name="icon">
<iconset>
<normaloff>../../../../../../../../home/laurent/Documents/03_Plans/Python/Icons/WF_boundingBox.svg</normaloff>../../../../../../../../home/laurent/Documents/03_Plans/Python/Icons/WF_boundingBox.svg</iconset>
</property>
<property name="iconSize">
<size>
<width>32</width>
<height>32</height>
</size>
</property>
</widget>
</item>
<item row="2" column="0">
<widget class="Line" name="line">
<property name="frameShadow">
<enum>QFrame::Plain</enum>
@ -2760,7 +2801,7 @@ NB:
</property>
</widget>
</item>
<item row="3" column="0">
<item row="2" column="0">
<layout class="QGridLayout" name="gridLayout_6">
<item row="0" column="0">
<widget class="QPushButton" name="button_cylinder_create">
@ -2847,7 +2888,7 @@ Negative value will reverse the direction from Ref. Point</string>
</item>
</layout>
</item>
<item row="4" column="0">
<item row="3" column="0">
<layout class="QHBoxLayout" name="horizontalLayout_4">
<item>
<widget class="QPushButton" name="button_cube_create">
@ -2934,7 +2975,7 @@ Negative value will reverse the direction from Ref. Point</string>
</item>
</layout>
</item>
<item row="5" column="0">
<item row="4" column="0">
<layout class="QHBoxLayout" name="horizontalLayout_19">
<item>
<widget class="QPushButton" name="button_sphere_create">
@ -2991,7 +3032,7 @@ at the selected point(s).</string>
</item>
</layout>
</item>
<item row="6" column="0">
<item row="5" column="0">
<layout class="QHBoxLayout" name="horizontalLayout_20">
<item>
<widget class="QPushButton" name="button_dome_create">
@ -3085,7 +3126,7 @@ Original code from : Ulrich Brammer</string>
</item>
</layout>
</item>
<item row="7" column="0">
<item row="6" column="0">
<layout class="QHBoxLayout" name="horizontalLayout_23">
<item>
<widget class="QPushButton" name="button_letter">
@ -3162,7 +3203,7 @@ NB:
</item>
</layout>
</item>
<item row="8" column="0">
<item row="7" column="0">
<layout class="QHBoxLayout" name="horizontalLayout_34">
<item>
<widget class="QPushButton" name="button_revolve">
@ -3226,6 +3267,153 @@ NB:
</item>
</layout>
</item>
<item row="8" column="0">
<widget class="QFrame" name="frame_5">
<property name="frameShape">
<enum>QFrame::StyledPanel</enum>
</property>
<property name="frameShadow">
<enum>QFrame::Raised</enum>
</property>
<property name="lineWidth">
<number>3</number>
</property>
<layout class="QGridLayout" name="gridLayout_53">
<item row="0" column="0">
<layout class="QGridLayout" name="gridLayout_12">
<item row="2" column="0">
<widget class="QCheckBox" name="checkBox_allsubselect">
<property name="toolTip">
<string>if &quot;All&quot; is toggled:
All the wires of the Trajectory selected will be considered.
Untoggled if you select a Skecth with several curves and you want to process
only the one subselected.</string>
</property>
<property name="text">
<string>All</string>
</property>
<property name="checked">
<bool>true</bool>
</property>
</widget>
</item>
<item row="2" column="1">
<widget class="QComboBox" name="transition_comboBox">
<property name="toolTip">
<string>For the function :
makePipeShell(shapeList,[isSolid,isFrenet,transition])
Select a Transition option in case of trajectory with several wires; Transition can be:
# 0 (default), 1 (right corners) or 2 (rounded corners).</string>
</property>
<property name="currentIndex">
<number>2</number>
</property>
<item>
<property name="text">
<string>No Transition</string>
</property>
</item>
<item>
<property name="text">
<string>Right corners</string>
</property>
</item>
<item>
<property name="text">
<string>Rounded corners</string>
</property>
</item>
</widget>
</item>
<item row="1" column="0">
<widget class="QCheckBox" name="checkBox_solid">
<property name="minimumSize">
<size>
<width>9</width>
<height>0</height>
</size>
</property>
<property name="maximumSize">
<size>
<width>60</width>
<height>16777215</height>
</size>
</property>
<property name="toolTip">
<string>if &quot;Solid&quot; is toggled:
The Beam sweep will generate a solid with a closed selected wire as Section.
If this check box is toggle off:
Or if the Section wire is not closed, only a shell will be created.</string>
</property>
<property name="text">
<string>Solid</string>
</property>
<property name="checked">
<bool>true</bool>
</property>
</widget>
</item>
<item row="1" column="1">
<widget class="QRadioButton" name="radioButton_Frenet">
<property name="toolTip">
<string>Force the &quot;isFrenet&quot; parameter to True for the function :
makePipeShell(shapeList,[isSolid,isFrenet,transition])
</string>
</property>
<property name="text">
<string>isFrenet</string>
</property>
<property name="checked">
<bool>true</bool>
</property>
<property name="autoExclusive">
<bool>false</bool>
</property>
</widget>
</item>
</layout>
</item>
<item row="1" column="0">
<widget class="QPushButton" name="button_sweep">
<property name="toolTip">
<string>Section Sweep:
# Make a loft defined by a list of profiles along a wire.
Will extrude/sweep a Section along a Trajectory like sweep from Part Workbench but:
- the Section center (of Mass) is move at the first point of the Trajectory and;
- the &quot;plane&quot; of the Section is rotate to be perpendicular to the Trajectory.
- Select first one Section wire (Closed wire will generate volumes by default)
(This Section can be a compound from sketch to realize &quot;tube&quot;)
- Select one or several wire(s) as Trajectory(ies)
- Then push this button
NB: You can change first:
- Solid option (if toggled will generate a solid for Closed wire Section only)
- isFrenet option
- All option (means if the trajectory selected is a compound, all sub wires will be used for the sweep)
- Transition Option (Select a Transition option in case of trajectory with several wires; Transition can be:
# 0 (default), 1 (right corners) or 2 (rounded corners).)
</string>
</property>
<property name="text">
<string>Section Sweep</string>
</property>
<property name="icon">
<iconset>
<normaloff>../../../../../../../../home/laurent/Documents/03_Plans/Python/Icons/WF_Beam.svg</normaloff>../../../../../../../../home/laurent/Documents/03_Plans/Python/Icons/WF_Beam.svg</iconset>
</property>
<property name="iconSize">
<size>
<width>32</width>
<height>32</height>
</size>
</property>
</widget>
</item>
</layout>
</widget>
</item>
<item row="9" column="0">
<spacer name="verticalSpacer">
<property name="orientation">
@ -3233,8 +3421,8 @@ NB:
</property>
<property name="sizeHint" stdset="0">
<size>
<width>20</width>
<height>40</height>
<width>17</width>
<height>8</height>
</size>
</property>
</spacer>
@ -3249,7 +3437,7 @@ NB:
<item row="0" column="0">
<widget class="QTabWidget" name="tabWidget_2">
<property name="currentIndex">
<number>2</number>
<number>0</number>
</property>
<widget class="QWidget" name="align_tab">
<attribute name="title">
@ -3273,6 +3461,7 @@ NB:
<property name="toolTip">
<string>Align the face of selected object(s) to the actual view Plane.
- Click first to select a Face of one or several objects.
These objects will be moved not the point of view.
Then Click the button.
NB:
@ -3282,6 +3471,9 @@ NB:
if the Face of the object selected is already aligned to the view Plane,
a rotation of 180 deg is applied to the object.
In this case the Axis of rotation is Z vector : Base.Vector(0, 0, 1)
Two clicks will rotate by 180 deg the moving objects.
</string>
</property>
<property name="text">
@ -3312,7 +3504,8 @@ NB:
<property name="toolTip">
<string>Align the Face(s) from selected object(s) to the last Face selected.
- Click first to select a Face of an object or several Faces from several objects.
- Click second to select a Face to align to.
These objects will be moved.
- Click second to select a Face to align to (the last object is fixed and will never move).
Then Click the button.
NB:
@ -3321,7 +3514,10 @@ NB:
if the Face of the object selected is already aligned to the last one,
a rotation of 180 deg is applied to the object.
In this case the Axis of rotation is Z vector : Base.Vector(0, 0, 1)</string>
In this case the Axis of rotation is Z vector : Base.Vector(0, 0, 1)
Two clicks will rotate by 180 deg the moving objects.
</string>
</property>
<property name="text">
<string>Align Faces</string>
@ -3381,7 +3577,8 @@ NB:
<property name="toolTip">
<string>Align the Edge(s) from selected object(s) to the last Edge selected.
- Click first to select an Edge of an object or several Edges from several objects.
- Click second to select an Edge to align to.
These objects will be moved.
- Click second to select an Edge to align to (the last object is fixed and will never move).
Then Click the button.
NB:
@ -3390,7 +3587,10 @@ NB:
if the Edge of the object selected is already aligned to the last one,
a rotation of 180 deg is applied to the object.
In this case the Axis of rotation is Z vector : Base.Vector(0, 0, 1)</string>
In this case the Axis of rotation is Z vector : Base.Vector(0, 0, 1)
Two clicks will rotate by 180 deg the moving objects.
</string>
</property>
<property name="text">
<string>Align Edges</string>
@ -3437,13 +3637,28 @@ NB:
</item>
</layout>
</item>
<item row="5" column="0">
<spacer name="verticalSpacer_15">
<property name="orientation">
<enum>Qt::Vertical</enum>
</property>
<property name="sizeHint" stdset="0">
<size>
<width>20</width>
<height>40</height>
</size>
</property>
</spacer>
</item>
<item row="3" column="0">
<widget class="QPushButton" name="button_joint_points">
<property name="toolTip">
<string>Joint Point(s) from selected object(s) to the last Point selected.
- Click first to select a Point of an object or several Points from several objects.
- Click second to select an Point to joint to.
- Click first to select a Point of an object or several Points from several objects.
These objects will be moved.
- Click second to select an Point to joint to (the last object is fixed and will never move).
Then Click the button.
</string>
</property>
<property name="text">
@ -3462,17 +3677,31 @@ Then Click the button.
</widget>
</item>
<item row="4" column="0">
<spacer name="verticalSpacer_15">
<property name="orientation">
<enum>Qt::Vertical</enum>
<widget class="QPushButton" name="button_joint_faces">
<property name="toolTip">
<string>Joint Face(s) from selected object(s) to the last Face selected.
- Click first to select a Face of an object or several Faces from several objects.
These objects will be moved.
- Click second to select a Face to joint to (the last object is fixed and will never move).
Then Click the button.
Two clicks will rotate by 180 deg the moving objects.
</string>
</property>
<property name="sizeHint" stdset="0">
<property name="text">
<string>Joint Faces</string>
</property>
<property name="icon">
<iconset>
<normaloff>../../../../../../../../home/laurent/Documents/03_Plans/Python/Icons/WF_objectJointFaces.svg</normaloff>../../../../../../../../home/laurent/Documents/03_Plans/Python/Icons/WF_objectJointFaces.svg</iconset>
</property>
<property name="iconSize">
<size>
<width>20</width>
<height>40</height>
<width>32</width>
<height>32</height>
</size>
</property>
</spacer>
</widget>
</item>
</layout>
</widget>
@ -4365,7 +4594,7 @@ N copies requested :
<number>1</number>
</property>
<property name="maximum">
<number>10</number>
<number>20</number>
</property>
<property name="singleStep">
<number>1</number>
@ -5038,30 +5267,6 @@ by the function getCameraOrientation().</string>
</property>
</spacer>
</item>
<item row="0" column="0">
<widget class="QPushButton" name="button_isParallel">
<property name="toolTip">
<string>Check if two faces or two Edges are Parallel:
- Select the 2 faces/planes or 2 Edges/Lines and
Click this button
NB: You can change the tolerance in &quot;Ori. Pref.&quot; TAB</string>
</property>
<property name="text">
<string>are Parallel ?</string>
</property>
<property name="icon">
<iconset>
<normaloff>../../../../../../../../home/laurent/Documents/03_Plans/Python/Icons/WF_isParallel.svg</normaloff>../../../../../../../../home/laurent/Documents/03_Plans/Python/Icons/WF_isParallel.svg</iconset>
</property>
<property name="iconSize">
<size>
<width>32</width>
<height>32</height>
</size>
</property>
</widget>
</item>
<item row="2" column="0">
<widget class="QPushButton" name="button_isCoplanar">
<property name="toolTip">
@ -5086,6 +5291,30 @@ NB: You can change the tolerance in &quot;Ori. Pref.&quot; TAB</string>
</property>
</widget>
</item>
<item row="0" column="0">
<widget class="QPushButton" name="button_isParallel">
<property name="toolTip">
<string>Check if two faces or two Edges are Parallel:
- Select the 2 faces/planes or 2 Edges/Lines and
Click this button
NB: You can change the tolerance in &quot;Ori. Pref.&quot; TAB</string>
</property>
<property name="text">
<string>are Parallel ?</string>
</property>
<property name="icon">
<iconset>
<normaloff>../../../../../../../../home/laurent/Documents/03_Plans/Python/Icons/WF_isParallel.svg</normaloff>../../../../../../../../home/laurent/Documents/03_Plans/Python/Icons/WF_isParallel.svg</iconset>
</property>
<property name="iconSize">
<size>
<width>32</width>
<height>32</height>
</size>
</property>
</widget>
</item>
<item row="4" column="0">
<widget class="QPushButton" name="button_isAngle">
<property name="toolTip">
@ -5142,30 +5371,6 @@ Click this button
</property>
</widget>
</item>
<item row="1" column="0">
<widget class="QPushButton" name="button_isPerpendicular">
<property name="toolTip">
<string>Check if two faces or two Edges are Perpendicular:
- Select the 2 faces/planes or 2 Edges/Lines and
Click this button
NB: You can change the tolerance in &quot;Ori. Pref.&quot; TAB</string>
</property>
<property name="text">
<string>are Perpendicular ?</string>
</property>
<property name="icon">
<iconset>
<normaloff>../../../../../../../../home/laurent/Documents/03_Plans/Python/Icons/WF_isPerpendicular.svg</normaloff>../../../../../../../../home/laurent/Documents/03_Plans/Python/Icons/WF_isPerpendicular.svg</iconset>
</property>
<property name="iconSize">
<size>
<width>32</width>
<height>32</height>
</size>
</property>
</widget>
</item>
<item row="5" column="0">
<widget class="QPushButton" name="button_isDistance">
<property name="toolTip">
@ -5190,6 +5395,30 @@ Click this button
</property>
</widget>
</item>
<item row="1" column="0">
<widget class="QPushButton" name="button_isPerpendicular">
<property name="toolTip">
<string>Check if two faces or two Edges are Perpendicular:
- Select the 2 faces/planes or 2 Edges/Lines and
Click this button
NB: You can change the tolerance in &quot;Ori. Pref.&quot; TAB</string>
</property>
<property name="text">
<string>are Perpendicular ?</string>
</property>
<property name="icon">
<iconset>
<normaloff>../../../../../../../../home/laurent/Documents/03_Plans/Python/Icons/WF_isPerpendicular.svg</normaloff>../../../../../../../../home/laurent/Documents/03_Plans/Python/Icons/WF_isPerpendicular.svg</iconset>
</property>
<property name="iconSize">
<size>
<width>32</width>
<height>32</height>
</size>
</property>
</widget>
</item>
<item row="3" column="0">
<widget class="QPushButton" name="button_isClearance">
<property name="toolTip">

1094
WorkFeature/__init__.py
View File

File diff suppressed because it is too large Load Diff