cae32defee
git-subtree-dir: CadQuery/Libs/cadquery-lib git-subtree-mainline:cbe50efeabgit-subtree-split:146ecd589b
44 lines
1.6 KiB
Python
44 lines
1.6 KiB
Python
#File: Ex009_Polylines.py
|
|
#To use this example file, you need to first follow the "Using CadQuery From Inside FreeCAD"
|
|
#instructions here: https://github.com/dcowden/cadquery#installing----using-cadquery-from-inside-freecad
|
|
|
|
#You run this example by typing the following in the FreeCAD python console, making sure to change
|
|
#the path to this example, and the name of the example appropriately.
|
|
#import sys
|
|
#sys.path.append('/home/user/Downloads/cadquery/examples/FreeCAD')
|
|
#import Ex009_Polylines
|
|
|
|
#If you need to reload the part after making a change, you can use the following lines within the FreeCAD console.
|
|
#reload(Ex009_Polylines)
|
|
|
|
#You'll need to delete the original shape that was created, and the new shape should be named sequentially
|
|
# (Shape001, etc).
|
|
|
|
#You can also tie these blocks of code to macros, buttons, and keybindings in FreeCAD for quicker access.
|
|
#You can get a more information on this example at
|
|
# http://parametricparts.com/docs/examples.html#an-extruded-prismatic-solid
|
|
|
|
import cadquery
|
|
import Part
|
|
|
|
#Set up our Length, Height, Width, and thickness that will be used to define the locations that the polyline
|
|
#is drawn to/thru
|
|
(L, H, W, t) = (100.0, 20.0, 20.0, 1.0)
|
|
|
|
#Define the locations that the polyline will be drawn to/thru
|
|
pts = [
|
|
(0, H/2.0),
|
|
(W/2.0, H/2.0),
|
|
(W/2.0, (H/2.0 - t)),
|
|
(t/2.0, (H/2.0-t)),
|
|
(t/2.0, (t - H/2.0)),
|
|
(W/2.0, (t - H/2.0)),
|
|
(W/2.0, H/-2.0),
|
|
(0, H/-2.0)
|
|
]
|
|
|
|
#We generate half of the I-beam outline and then mirror it to create the full I-beam
|
|
result = cadquery.Workplane("front").polyline(pts).mirrorY().extrude(L)
|
|
|
|
#Boiler plate code to render our solid in FreeCAD's GUI
|
|
Part.show(result.toFreecad()) |