diff --git a/src/README b/src/README
index cf17222636..acc0cc1806 100644
--- a/src/README
+++ b/src/README
@@ -52,12 +52,12 @@ the Unix instructions below, but note the following:
 
  * The --enable-shared flag for `configure' must not be used,
    because builds create and use frameworks by default. Furthermore,
-   --disable-shared is not supported.
+   --disable-shared is not supported. (Unless you use --enable-xonx...)
 
  * To build an X11-based MrEd, run `configure' with the --enable-xonx
-   flag. Frameworks are not used for such builds (and shared libraries
-   are not supported). The --enable-xonx flag also affects the
-   MzScheme build so that `system-type' reports 'unix.
+   flag. Frameworks are not used for such builds, so --enable-shared
+   is allowed. The --enable-xonx flag also affects the MzScheme build,
+   so that `system-type' reports 'unix.
 
 ========================================================================
  Compiling for supported Unix variants (including Linux) or Cygwin
diff --git a/src/configure b/src/configure
index 3b373ade5a..fb84888c3d 100755
--- a/src/configure
+++ b/src/configure
@@ -1585,8 +1585,11 @@ fi
 
 if test "${enable_shared}" = "yes" ; then
   if test "$OS" = "Darwin" ; then
-    echo "ERROR: don't use --enable-shared or --enable-dynlib under Mac OS X"
-    exit 1
+    if test "${enable_xonx}" != "yes" ; then
+       echo "ERROR: don't use --enable-shared or --enable-dynlib under Mac OS X,"
+       echo "       unless you also use --enable-xonx"
+       exit 1
+    fi
   fi
 fi
 
diff --git a/src/lt/aclocal.m4 b/src/lt/aclocal.m4
index 19ebaea7c6..9656eac3a0 100644
--- a/src/lt/aclocal.m4
+++ b/src/lt/aclocal.m4
@@ -1,28 +1,13 @@
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-## Copyright 1996, 1997, 1998, 1999, 2000, 2001
+## Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007
 ## Free Software Foundation, Inc.
 ## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 ##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful, but
-## WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-## General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-##
-## As a special exception to the GNU General Public License, if you
-## distribute this file as part of a program that contains a
-## configuration script generated by Autoconf, you may include it under
-## the same distribution terms that you use for the rest of that program.
+## This file is free software; the Free Software Foundation gives
+## unlimited permission to copy and/or distribute it, with or without
+## modifications, as long as this notice is preserved.
 
-# serial 47 AC_PROG_LIBTOOL
+# serial 51 AC_PROG_LIBTOOL
 
 
 # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
@@ -132,7 +117,7 @@ esac
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
+Xsed='sed -e 1s/^X//'
 [sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
 
 # Same as above, but do not quote variable references.
@@ -152,7 +137,7 @@ rm="rm -f"
 default_ofile=libtool
 can_build_shared=yes
 
-# All known linkers require a `.a' archive for static linking (except M$VC,
+# All known linkers require a `.a' archive for static linking (except MSVC,
 # which needs '.lib').
 libext=a
 ltmain="$ac_aux_dir/ltmain.sh"
@@ -172,6 +157,7 @@ test -z "$AR_FLAGS" && AR_FLAGS=cru
 test -z "$AS" && AS=as
 test -z "$CC" && CC=cc
 test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
 test -z "$DLLTOOL" && DLLTOOL=dlltool
 test -z "$LD" && LD=ld
 test -z "$LN_S" && LN_S="ln -s"
@@ -184,22 +170,24 @@ test -z "$STRIP" && STRIP=:
 test -z "$ac_objext" && ac_objext=o
 
 # Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
 old_postinstall_cmds='chmod 644 $oldlib'
 old_postuninstall_cmds=
 
 if test -n "$RANLIB"; then
   case $host_os in
   openbsd*)
-    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
     ;;
   *)
-    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
     ;;
   esac
   old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
 fi
 
+_LT_CC_BASENAME([$compiler])
+
 # Only perform the check for file, if the check method requires it
 case $deplibs_check_method in
 file_magic*)
@@ -240,11 +228,58 @@ AC_DEFUN([_LT_AC_SYS_COMPILER],
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
 # Allow CC to be a program name with arguments.
 compiler=$CC
 ])# _LT_AC_SYS_COMPILER
 
 
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+AC_DEFUN([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+  case $cc_temp in
+    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+])
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+AC_DEFUN([_LT_COMPILER_BOILERPLATE],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+AC_DEFUN([_LT_LINKER_BOILERPLATE],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+])# _LT_LINKER_BOILERPLATE
+
+
 # _LT_AC_SYS_LIBPATH_AIX
 # ----------------------
 # Links a minimal program and checks the executable
@@ -254,12 +289,20 @@ compiler=$CC
 # If we don't find anything, use the default library path according
 # to the aix ld manual.
 AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 # Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi],[])
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi],[])
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 ])# _LT_AC_SYS_LIBPATH_AIX
 
@@ -317,15 +360,15 @@ fi
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 if test -z "$ECHO"; then
 if test "X${echo_test_string+set}" != Xset; then
 # find a string as large as possible, as long as the shell can cope with it
   for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
     # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-       echo_test_string="`eval $cmd`" &&
+    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
+       echo_test_string=`eval $cmd` &&
        (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
     then
       break
@@ -490,17 +533,21 @@ ia64-*-hpux*)
   rm -rf conftest*
   ;;
 
-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|sparc*-*linux*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
+    case `/usr/bin/file conftest.o` in
     *32-bit*)
       case $host in
+        x86_64-*kfreebsd*-gnu)
+          LD="${LD-ld} -m elf_i386_fbsd"
+          ;;
         x86_64-*linux*)
           LD="${LD-ld} -m elf_i386"
           ;;
-        ppc64-*linux*)
+        ppc64-*linux*|powerpc64-*linux*)
           LD="${LD-ld} -m elf32ppclinux"
           ;;
         s390x-*linux*)
@@ -513,6 +560,9 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
       ;;
     *64-bit*)
       case $host in
+        x86_64-*kfreebsd*-gnu)
+          LD="${LD-ld} -m elf_x86_64_fbsd"
+          ;;
         x86_64-*linux*)
           LD="${LD-ld} -m elf_x86_64"
           ;;
@@ -545,6 +595,22 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
     CFLAGS="$SAVE_CFLAGS"
   fi
   ;;
+sparc*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*) LD="${LD-ld} -m elf64_sparc" ;;
+      *)    LD="${LD-ld} -64" ;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
 AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
 [*-*-cygwin* | *-*-mingw* | *-*-pw32*)
   AC_CHECK_TOOL(DLLTOOL, dlltool, false)
@@ -564,10 +630,11 @@ need_locks="$enable_libtool_lock"
 # ----------------------------------------------------------------
 # Check whether the given compiler option works
 AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
-[AC_CACHE_CHECK([$1], [$2],
+[AC_REQUIRE([LT_AC_PROG_SED])
+AC_CACHE_CHECK([$1], [$2],
   [$2=no
   ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="$3"
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
@@ -575,7 +642,7 @@ AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    # The option is referenced via a variable to avoid confusing sed.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
    (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
@@ -585,8 +652,10 @@ AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
    echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test ! -s conftest.err; then
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        $2=yes
      fi
    fi
@@ -606,17 +675,23 @@ fi
 # ------------------------------------------------------------
 # Check whether the given compiler option works
 AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-[AC_CACHE_CHECK([$1], [$2],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
   [$2=no
    save_LDFLAGS="$LDFLAGS"
    LDFLAGS="$LDFLAGS $3"
-   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The compiler can only warn and ignore the option if not recognized
+     # The linker can only warn and ignore the option if not recognized
      # So say no if there are warnings
      if test -s conftest.err; then
        # Append any errors to the config.log.
        cat conftest.err 1>&AS_MESSAGE_LOG_FD
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         $2=yes
+       fi
      else
        $2=yes
      fi
@@ -640,7 +715,7 @@ AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
 AC_MSG_CHECKING([the maximum length of command line arguments])
 AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
   i=0
-  testring="ABCD"
+  teststring="ABCD"
 
   case $build_os in
   msdosdjgpp*)
@@ -669,24 +744,77 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
- *)
-    # If test is not a shell built-in, we'll probably end up computing a
-    # maximum length that is only half of the actual maximum length, but
-    # we can't tell.
-    while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \
-	       = "XX$testring") >/dev/null 2>&1 &&
-	    new_result=`expr "X$testring" : ".*" 2>&1` &&
-	    lt_cv_sys_max_cmd_len=$new_result &&
-	    test $i != 17 # 1/2 MB should be enough
-    do
-      i=`expr $i + 1`
-      testring=$testring$testring
-    done
-    testring=
-    # Add a significant safety factor because C++ compilers can tack on massive
-    # amounts of additional arguments before passing them to the linker.
-    # It appears as though 1/2 is a usable value.
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ 	]]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
+	       = "XX$teststring") >/dev/null 2>&1 &&
+	      new_result=`expr "X$teststring" : ".*" 2>&1` &&
+	      lt_cv_sys_max_cmd_len=$new_result &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on massive
+      # amounts of additional arguments before passing them to the linker.
+      # It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
     ;;
   esac
 ])
@@ -699,7 +827,7 @@ fi
 
 
 # _LT_AC_CHECK_DLFCN
-# --------------------
+# ------------------
 AC_DEFUN([_LT_AC_CHECK_DLFCN],
 [AC_CHECK_HEADERS(dlfcn.h)dnl
 ])# _LT_AC_CHECK_DLFCN
@@ -707,7 +835,7 @@ AC_DEFUN([_LT_AC_CHECK_DLFCN],
 
 # _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
 #                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ------------------------------------------------------------------
+# ---------------------------------------------------------------------
 AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
 [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
 if test "$cross_compiling" = yes; then :
@@ -773,17 +901,19 @@ int main ()
       else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
       /* dlclose (self); */
     }
+  else
+    puts (dlerror ());
 
     exit (status);
 }]
 EOF
   if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
+    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
     lt_status=$?
     case x$lt_status in
       x$lt_dlno_uscore) $1 ;;
       x$lt_dlneed_uscore) $2 ;;
-      x$lt_unknown|x*) $3 ;;
+      x$lt_dlunknown|x*) $3 ;;
     esac
   else :
     # compilation failed
@@ -795,7 +925,7 @@ rm -fr conftest*
 
 
 # AC_LIBTOOL_DLOPEN_SELF
-# -------------------
+# ----------------------
 AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
 [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
 if test "x$enable_dlopen" != xyes; then
@@ -832,7 +962,7 @@ else
     lt_cv_dlopen_self=yes
     ])
    ;;
-    
+
   *)
     AC_CHECK_FUNC([shl_load],
 	  [lt_cv_dlopen="shl_load"],
@@ -866,7 +996,7 @@ else
     test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
 
     save_LDFLAGS="$LDFLAGS"
-    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
 
     save_LIBS="$LIBS"
     LIBS="$lt_cv_dlopen_libs $LIBS"
@@ -879,7 +1009,7 @@ else
     ])
 
     if test "x$lt_cv_dlopen_self" = xyes; then
-      LDFLAGS="$LDFLAGS $link_static_flag"
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
       AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
     	  lt_cv_dlopen_self_static, [dnl
 	  _LT_AC_TRY_DLOPEN_SELF(
@@ -911,7 +1041,8 @@ fi
 # ---------------------------------
 # Check to see if options -c and -o are simultaneously supported by compiler
 AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
 AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
   [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
   [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
@@ -919,14 +1050,7 @@ AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
    mkdir conftest
    cd conftest
    mkdir out
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-   # that will create temporary files in the current directory regardless of
-   # the output directory.  Thus, making CWD read-only will cause this test
-   # to fail, enabling locking or at least warning the user not to do parallel
-   # builds.
-   chmod -w .
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
    lt_compiler_flag="-o out/conftest2.$ac_objext"
    # Insert the option either (1) after the last *FLAGS variable, or
@@ -934,7 +1058,7 @@ AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
    # Note that $ac_compile itself does not contain backslashes and begins
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
    (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
@@ -946,13 +1070,18 @@ AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     if test ! -s out/conftest.err; then
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
      fi
    fi
-   chmod u+w .
-   $rm conftest* out/*
-   rmdir out
+   chmod u+w . 2>&AS_MESSAGE_LOG_FD
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
    cd ..
    rmdir conftest
    $rm conftest*
@@ -1011,8 +1140,8 @@ AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
 [AC_MSG_CHECKING([how to hardcode library paths into programs])
 _LT_AC_TAGVAR(hardcode_action, $1)=
 if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-   test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \
-   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then
+   test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
+   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
 
   # We can hardcode non-existant directories.
   if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
@@ -1061,6 +1190,7 @@ else
    darwin*)
        if test -n "$STRIP" ; then
          striplib="$STRIP -x"
+         old_striplib="$STRIP -S"
          AC_MSG_RESULT([yes])
        else
   AC_MSG_RESULT([no])
@@ -1069,7 +1199,7 @@ fi
    *)
   AC_MSG_RESULT([no])
     ;;
-  esac  
+  esac
 fi
 ])# AC_LIBTOOL_SYS_LIB_STRIP
 
@@ -1078,11 +1208,12 @@ fi
 # -----------------------------
 # PORTME Fill in your ld.so characteristics
 AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-[AC_MSG_CHECKING([dynamic linker characteristics])
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
-shrext=".so"
+shrext_cmds=".so"
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
@@ -1092,20 +1223,58 @@ shlibpath_overrides_runpath=unknown
 version_type=none
 dynamic_linker="$host_os ld.so"
 sys_lib_dlsearch_path_spec="/lib /usr/lib"
+m4_if($1,[],[
 if test "$GCC" = yes; then
-  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
     # if the path contains ";" then we assume it to be the separator
     # otherwise default to the standard path separator (i.e. ":") - it is
     # assumed that no part of a normal pathname contains ";" but that should
     # okay in the real world where ";" in dirpaths is itself problematic.
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
   else
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
   fi
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+  sys_lib_search_path_spec=`echo $lt_search_path_spec`
 else
   sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
+fi])
 need_lib_prefix=unknown
 hardcode_into_libs=no
 
@@ -1170,7 +1339,7 @@ aix4* | aix5*)
 amigaos*)
   library_names_spec='$libname.ixlibrary $libname.a'
   # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
   ;;
 
 beos*)
@@ -1179,7 +1348,7 @@ beos*)
   shlibpath_var=LIBRARY_PATH
   ;;
 
-bsdi4*)
+bsdi[[45]]*)
   version_type=linux
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -1195,7 +1364,7 @@ bsdi4*)
 
 cygwin* | mingw* | pw32*)
   version_type=windows
-  shrext=".dll"
+  shrext_cmds=".dll"
   need_version=no
   need_lib_prefix=no
 
@@ -1207,7 +1376,8 @@ cygwin* | mingw* | pw32*)
       dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname'
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
     postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
       dlpath=$dir/\$dldll~
        $rm \$dlpath'
@@ -1217,7 +1387,7 @@ cygwin* | mingw* | pw32*)
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
       ;;
     mingw*)
       # MinGW DLLs use traditional 'lib' prefix
@@ -1237,7 +1407,7 @@ cygwin* | mingw* | pw32*)
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
       ;;
     esac
     ;;
@@ -1256,18 +1426,13 @@ darwin* | rhapsody*)
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  # FIXME: Relying on posixy $() will cause problems for
-  #        cross-compilation, but unfortunately the echo tests do not
-  #        yet detect zsh echo's removal of \ escapes.
   library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
-  shrext='$(test .$module = .yes && echo .so || echo .dylib)'
-  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-  if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then 
-  sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-  fi
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+  m4_if([$1], [],[
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) 
   sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
   ;;
 
@@ -1284,8 +1449,17 @@ freebsd1*)
   dynamic_linker=no
   ;;
 
-freebsd*)
-  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[[123]]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
@@ -1303,14 +1477,19 @@ freebsd*)
   freebsd2*)
     shlibpath_overrides_runpath=yes
     ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
+  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
     shlibpath_overrides_runpath=yes
     hardcode_into_libs=yes
     ;;
-  *) # from 3.2 on
+  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
     shlibpath_overrides_runpath=no
     hardcode_into_libs=yes
     ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
   esac
   ;;
 
@@ -1330,9 +1509,9 @@ hpux9* | hpux10* | hpux11*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
-  case "$host_cpu" in
+  case $host_cpu in
   ia64*)
-    shrext='.so'
+    shrext_cmds='.so'
     hardcode_into_libs=yes
     dynamic_linker="$host_os dld.so"
     shlibpath_var=LD_LIBRARY_PATH
@@ -1347,7 +1526,7 @@ hpux9* | hpux10* | hpux11*)
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
    hppa*64*)
-     shrext='.sl'
+     shrext_cmds='.sl'
      hardcode_into_libs=yes
      dynamic_linker="$host_os dld.sl"
      shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
@@ -1358,7 +1537,7 @@ hpux9* | hpux10* | hpux11*)
      sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
      ;;
    *)
-    shrext='.sl'
+    shrext_cmds='.sl'
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
@@ -1370,6 +1549,18 @@ hpux9* | hpux10* | hpux11*)
   postinstall_cmds='chmod 555 $lib'
   ;;
 
+interix[[3-9]]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
 irix5* | irix6* | nonstopux*)
   case $host_os in
     nonstopux*) version_type=nonstopux ;;
@@ -1413,7 +1604,7 @@ linux*oldld* | linux*aout* | linux*coff*)
   ;;
 
 # This must be Linux ELF.
-linux*)
+linux* | k*bsd*-gnu)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -1427,6 +1618,12 @@ linux*)
   # before this can be enabled.
   hardcode_into_libs=yes
 
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
   # We used to test for /lib/ld.so.1 and disable shared libraries on
   # powerpc, because MkLinux only supported shared libraries with the
   # GNU dynamic linker.  Since this was broken with cross compilers,
@@ -1445,7 +1642,7 @@ netbsd*)
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
   else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
     soname_spec='${libname}${release}${shared_ext}$major'
     dynamic_linker='NetBSD ld.elf_so'
   fi
@@ -1461,7 +1658,7 @@ newsos6)
   shlibpath_overrides_runpath=yes
   ;;
 
-nto-qnx)
+nto-qnx*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -1473,8 +1670,13 @@ nto-qnx)
 
 openbsd*)
   version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
   need_lib_prefix=no
-  need_version=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
@@ -1494,7 +1696,7 @@ openbsd*)
 
 os2*)
   libname_spec='$name'
-  shrext=".dll"
+  shrext_cmds=".dll"
   need_lib_prefix=no
   library_names_spec='$libname${shared_ext} $libname.a'
   dynamic_linker='OS/2 ld.exe'
@@ -1512,11 +1714,8 @@ osf3* | osf4* | osf5*)
   sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
   ;;
 
-sco3.2v5*)
-  version_type=osf
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
+rdos*)
+  dynamic_linker=no
   ;;
 
 solaris*)
@@ -1544,7 +1743,7 @@ sunos4*)
   need_version=yes
   ;;
 
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+sysv4 | sysv4.3*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
@@ -1577,6 +1776,29 @@ sysv4*MP*)
   fi
   ;;
 
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
 uts4*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -1590,13 +1812,19 @@ uts4*)
 esac
 AC_MSG_RESULT([$dynamic_linker])
 test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
 ])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
 
 
 # _LT_AC_TAGCONFIG
 # ----------------
 AC_DEFUN([_LT_AC_TAGCONFIG],
-[AC_ARG_WITH([tags],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_ARG_WITH([tags],
     [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
         [include additional configurations @<:@automatic@:>@])],
     [tagnames="$withval"])
@@ -1614,6 +1842,9 @@ if test -f "$ltmain" && test -n "$tagnames"; then
       AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
     fi
   fi
+  if test -z "$LTCFLAGS"; then
+    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
+  fi
 
   # Extract list of available tagged configurations in $ofile.
   # Note that this assumes the entire list is on one line.
@@ -1640,7 +1871,9 @@ if test -f "$ltmain" && test -n "$tagnames"; then
 
       case $tagname in
       CXX)
-	if test -n "$CXX" && test "X$CXX" != "Xno"; then
+	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+	    (test "X$CXX" != "Xg++"))) ; then
 	  AC_LIBTOOL_LANG_CXX_CONFIG
 	else
 	  tagname=""
@@ -1702,7 +1935,7 @@ AC_DEFUN([AC_LIBTOOL_DLOPEN],
 
 # AC_LIBTOOL_WIN32_DLL
 # --------------------
-# declare package support for building win32 dll's
+# declare package support for building win32 DLLs
 AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
 [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
 ])# AC_LIBTOOL_WIN32_DLL
@@ -1740,7 +1973,7 @@ AC_ARG_ENABLE([shared],
 
 # AC_DISABLE_SHARED
 # -----------------
-#- set the default shared flag to --disable-shared
+# set the default shared flag to --disable-shared
 AC_DEFUN([AC_DISABLE_SHARED],
 [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
 AC_ENABLE_SHARED(no)
@@ -1852,7 +2085,7 @@ m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
 
 # AC_PATH_TOOL_PREFIX
 # -------------------
-# find a file program which can recognise shared library
+# find a file program which can recognize shared library
 AC_DEFUN([AC_PATH_TOOL_PREFIX],
 [AC_REQUIRE([AC_PROG_EGREP])dnl
 AC_MSG_CHECKING([for $1])
@@ -1876,7 +2109,7 @@ dnl not every word.  This closes a longstanding sh security hole.
       if test -n "$file_magic_test_file"; then
 	case $deplibs_check_method in
 	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
 	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
 	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
 	    $EGREP "$file_magic_regex" > /dev/null; then
@@ -1915,7 +2148,7 @@ fi
 
 # AC_PATH_MAGIC
 # -------------
-# find a file program which can recognise a shared library
+# find a file program which can recognize a shared library
 AC_DEFUN([AC_PATH_MAGIC],
 [AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
 if test -z "$lt_cv_path_MAGIC_CMD"; then
@@ -1930,7 +2163,7 @@ fi
 
 # AC_PROG_LD
 # ----------
-# find the path to the GNU or non-GNU linker
+# find the pathname to the GNU or non-GNU linker
 AC_DEFUN([AC_PROG_LD],
 [AC_ARG_WITH([gnu-ld],
     [AC_HELP_STRING([--with-gnu-ld],
@@ -1956,7 +2189,7 @@ if test "$GCC" = yes; then
     # Accept absolute paths.
     [[\\/]]* | ?:[[\\/]]*)
       re_direlt='/[[^/]][[^/]]*/\.\./'
-      # Canonicalize the path of ld
+      # Canonicalize the pathname of ld
       ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
       while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
 	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
@@ -1986,7 +2219,7 @@ AC_CACHE_VAL(lt_cv_path_LD,
     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
       lt_cv_path_LD="$ac_dir/$ac_prog"
       # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
+      # but apparently some variants of GNU ld only accept -v.
       # Break only if it was the GNU/non-GNU ld that we prefer.
       case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
       *GNU* | *'with BFD'*)
@@ -2018,8 +2251,8 @@ AC_PROG_LD_GNU
 AC_DEFUN([AC_PROG_LD_GNU],
 [AC_REQUIRE([AC_PROG_EGREP])dnl
 AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-case `"$LD" -v 2>&1 </dev/null` in
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
 *GNU* | *'with BFD'*)
   lt_cv_prog_gnu_ld=yes
   ;;
@@ -2045,6 +2278,15 @@ case $reload_flag in
 *) reload_flag=" $reload_flag" ;;
 esac
 reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
 ])# AC_PROG_LD_RELOAD_FLAG
 
 
@@ -2053,7 +2295,7 @@ reload_cmds='$LD$reload_flag -o $output$reload_objs'
 # how to check for library dependencies
 #  -- PORTME fill in with the dynamic library characteristics
 AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependent libraries],
+[AC_CACHE_CHECK([how to recognize dependent libraries],
 lt_cv_deplibs_check_method,
 [lt_cv_file_magic_cmd='$MAGIC_CMD'
 lt_cv_file_magic_test_file=
@@ -2078,40 +2320,42 @@ beos*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-bsdi4*)
+bsdi[[45]]*)
   lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
   lt_cv_file_magic_cmd='/usr/bin/file -L'
   lt_cv_file_magic_test_file=/shlib/libc.so
   ;;
 
-cygwin* | mingw* | pw32*)
-  # win32_libid is a shell function defined in ltmain.sh
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
   lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-  lt_cv_file_magic_cmd='win32_libid'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  if ( file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
   ;;
 
 darwin* | rhapsody*)
-  # this will be overwritten by pass_all, but leave it in just in case
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[[012]])
-    lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System`
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-freebsd*)
+freebsd* | dragonfly*)
   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
       # Not sure whether the presence of OpenBSD here was a mistake.
       # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
       lt_cv_file_magic_cmd=/usr/bin/file
       lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
       ;;
@@ -2127,7 +2371,7 @@ gnu*)
 
 hpux10.20* | hpux11*)
   lt_cv_file_magic_cmd=/usr/bin/file
-  case "$host_cpu" in
+  case $host_cpu in
   ia64*)
     lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
     lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
@@ -2143,37 +2387,24 @@ hpux10.20* | hpux11*)
   esac
   ;;
 
+interix[[3-9]]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+  ;;
+
 irix5* | irix6* | nonstopux*)
-  case $host_os in
-  irix5* | nonstopux*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
-    ;;
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
   esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 # This must be Linux ELF.
-linux*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh*)
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+linux* | k*bsd*-gnu)
+  lt_cv_deplibs_check_method=pass_all
   ;;
 
 netbsd*)
@@ -2190,37 +2421,31 @@ newos6*)
   lt_cv_file_magic_test_file=/usr/lib/libnls.so
   ;;
 
-nto-qnx)
+nto-qnx*)
   lt_cv_deplibs_check_method=unknown
   ;;
 
 openbsd*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
   if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
   else
-    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
   fi
   ;;
 
 osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-sco3.2v5*)
+rdos*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 solaris*)
   lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
   ;;
 
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+sysv4 | sysv4.3*)
   case $host_vendor in
   motorola)
     lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
@@ -2241,10 +2466,13 @@ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
   siemens)
     lt_cv_deplibs_check_method=pass_all
     ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
   esac
   ;;
 
-sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 esac
@@ -2257,43 +2485,50 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown
 
 # AC_PROG_NM
 # ----------
-# find the path to a BSD-compatible name lister
+# find the pathname to a BSD-compatible name lister
 AC_DEFUN([AC_PROG_NM],
 [AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
 [if test -n "$NM"; then
   # Let the user override the test.
   lt_cv_path_NM="$NM"
 else
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm="$ac_dir/${ac_tool_prefix}nm"
-    if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-      */dev/null* | *'Invalid file or object type'*)
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-        ;;
-      *)
-	case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-	*/dev/null*)
-	  lt_cv_path_NM="$tmp_nm -p"
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
 	  break
 	  ;;
 	*)
-	  lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	  continue # so that we can try to find one that supports BSD flags
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
 	  ;;
 	esac
-      esac
-    fi
+      fi
+    done
+    IFS="$lt_save_ifs"
   done
-  IFS="$lt_save_ifs"
   test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
 fi])
 NM="$lt_cv_path_NM"
@@ -2325,13 +2560,13 @@ esac
 # -----------------------------------
 # sets LIBLTDL to the link flags for the libltdl convenience library and
 # LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments.  Note that LIBLTDL
-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If
-# DIRECTORY is not provided, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
+# --enable-ltdl-convenience to the configure arguments.  Note that
+# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
+# it is assumed to be `libltdl'.  LIBLTDL will be prefixed with
+# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
+# (note the single quotes!).  If your package is not flat and you're not
+# using automake, define top_builddir and top_srcdir appropriately in
+# the Makefiles.
 AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
 [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
   case $enable_ltdl_convenience in
@@ -2350,13 +2585,13 @@ AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
 # -----------------------------------
 # sets LIBLTDL to the link flags for the libltdl installable library and
 # LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments.  Note that LIBLTDL
-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If
-# DIRECTORY is not provided and an installed libltdl is not found, it is
-# assumed to be `libltdl'.  LIBLTDL will be prefixed with '${top_builddir}/'
-# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
-# quotes!).  If your package is not flat and you're not using automake,
-# define top_builddir and top_srcdir appropriately in the Makefiles.
+# --enable-ltdl-install to the configure arguments.  Note that
+# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
+# and an installed libltdl is not found, it is assumed to be `libltdl'.
+# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
+# '${top_srcdir}/' (note the single quotes!).  If your package is not
+# flat and you're not using automake, define top_builddir and top_srcdir
+# appropriately in the Makefiles.
 # In the future, this macro may have to be called after AC_PROG_LIBTOOL.
 AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
 [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
@@ -2394,10 +2629,21 @@ AC_DEFUN([AC_LIBTOOL_CXX],
 # ---------------
 AC_DEFUN([_LT_AC_LANG_CXX],
 [AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,CXX" | sed 's/^,//'`])
+AC_REQUIRE([_LT_AC_PROG_CXXCPP])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
 ])# _LT_AC_LANG_CXX
 
+# _LT_AC_PROG_CXXCPP
+# ------------------
+AC_DEFUN([_LT_AC_PROG_CXXCPP],
+[
+AC_REQUIRE([AC_PROG_CXX])
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  AC_PROG_CXXCPP
+fi
+])# _LT_AC_PROG_CXXCPP
 
 # AC_LIBTOOL_F77
 # --------------
@@ -2411,7 +2657,7 @@ AC_DEFUN([AC_LIBTOOL_F77],
 # ---------------
 AC_DEFUN([_LT_AC_LANG_F77],
 [AC_REQUIRE([AC_PROG_F77])
-_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,F77" | sed 's/^,//'`])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
 ])# _LT_AC_LANG_F77
 
 
@@ -2432,16 +2678,16 @@ AC_DEFUN([_LT_AC_LANG_GCJ],
       [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
 	 [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
 	   [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,GCJ" | sed 's/^,//'`])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
 ])# _LT_AC_LANG_GCJ
 
 
 # AC_LIBTOOL_RC
-# --------------
+# -------------
 # enable support for Windows resource files
 AC_DEFUN([AC_LIBTOOL_RC],
 [AC_REQUIRE([LT_AC_PROG_RC])
-_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,RC" | sed 's/^,//'`])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
 ])# AC_LIBTOOL_RC
 
 
@@ -2463,43 +2709,16 @@ objext=o
 _LT_AC_TAGVAR(objext, $1)=$objext
 
 # Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
+lt_simple_compile_test_code="int some_variable = 0;"
 
 # Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}\n'
+lt_simple_link_test_code='int main(){return(0);}'
 
 _LT_AC_SYS_COMPILER
 
-#
-# Check for any special shared library compilation flags.
-#
-_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
-if test "$GCC" = no; then
-  case $host_os in
-  sco3.2v5*)
-    _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
-    ;;
-  esac
-fi
-if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
-  AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
-  if echo "$old_CC $old_CFLAGS " | grep "[[ 	]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ 	]]" >/dev/null; then :
-  else
-    AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
-    _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
-  fi
-fi
-
-
-#
-# Check to make sure the static flag actually works.
-#
-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
-  _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
-  $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
-  [],
-  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
-
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
 
 ## CAVEAT EMPTOR:
 ## There is no encapsulation within the following macros, do not change
@@ -2510,12 +2729,12 @@ AC_LIBTOOL_PROG_COMPILER_PIC($1)
 AC_LIBTOOL_PROG_CC_C_O($1)
 AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
 AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
 AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
 AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_DLOPEN_SELF($1)
+AC_LIBTOOL_DLOPEN_SELF
 
-# Report which librarie types wil actually be built
+# Report which library types will actually be built
 AC_MSG_CHECKING([if libtool supports shared libraries])
 AC_MSG_RESULT([$can_build_shared])
 
@@ -2524,7 +2743,7 @@ test "$can_build_shared" = "no" && enable_shared=no
 
 # On AIX, shared libraries and static libraries use the same namespace, and
 # are all built from PIC.
-case "$host_os" in
+case $host_os in
 aix3*)
   test "$enable_shared" = yes && enable_static=no
   if test -n "$RANLIB"; then
@@ -2533,39 +2752,11 @@ aix3*)
   fi
   ;;
 
-aix4*)
+aix4* | aix5*)
   if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
     test "$enable_shared" = yes && enable_static=no
   fi
-  ;;
-  darwin* | rhapsody*)
-  if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then 
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    case "$host_os" in
-    rhapsody* | darwin1.[[012]])
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-      ;;
-    *) # Darwin 1.3 on
-      test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-      ;;
-    esac
-    # FIXME: Relying on posixy $() will cause problems for
-    #        cross-compilation, but unfortunately the echo tests do not
-    #        yet detect zsh echo's removal of \ escapes.  Also zsh mangles
-    #	       `"' quotes if we put them in here... so don't!
-		output_verbose_link_cmd='echo'
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
-    _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-    # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-		  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag  -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-		  _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag  -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    _LT_AC_TAGVAR(hardcode_direct, $1)=no
-    _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-    fi
-    ;;  
+    ;;
 esac
 AC_MSG_RESULT([$enable_shared])
 
@@ -2590,7 +2781,7 @@ AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
 AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
 [AC_LANG_PUSH(C++)
 AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
+AC_REQUIRE([_LT_AC_PROG_CXXCPP])
 
 _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
 _LT_AC_TAGVAR(allow_undefined_flag, $1)=
@@ -2602,6 +2793,7 @@ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
 _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
 _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
 _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
 _LT_AC_TAGVAR(hardcode_automatic, $1)=no
 _LT_AC_TAGVAR(module_cmds, $1)=
 _LT_AC_TAGVAR(module_expsym_cmds, $1)=
@@ -2619,21 +2811,25 @@ _LT_AC_TAGVAR(postdeps, $1)=
 _LT_AC_TAGVAR(compiler_lib_search_path, $1)=
 
 # Source file extension for C++ test sources.
-ac_ext=cc
+ac_ext=cpp
 
 # Object file extension for compiled C++ test sources.
 objext=o
 _LT_AC_TAGVAR(objext, $1)=$objext
 
 # Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
+lt_simple_compile_test_code="int some_variable = 0;"
 
 # Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
+lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
 
 # ltmain only uses $CC for tagged configurations so make sure $CC is set.
 _LT_AC_SYS_COMPILER
 
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
 # Allow CC to be a program name with arguments.
 lt_save_CC=$CC
 lt_save_LD=$LD
@@ -2644,18 +2840,18 @@ lt_save_path_LD=$lt_cv_path_LD
 if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
   lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
 else
-  unset lt_cv_prog_gnu_ld
+  $as_unset lt_cv_prog_gnu_ld
 fi
 if test -n "${lt_cv_path_LDCXX+set}"; then
   lt_cv_path_LD=$lt_cv_path_LDCXX
 else
-  unset lt_cv_path_LD
+  $as_unset lt_cv_path_LD
 fi
 test -z "${LDCXX+set}" || LD=$LDCXX
 CC=${CXX-"c++"}
 compiler=$CC
 _LT_AC_TAGVAR(compiler, $1)=$CC
-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+_LT_CC_BASENAME([$compiler])
 
 # We don't want -fno-exception wen compiling C++ code, so set the
 # no_builtin_flag separately
@@ -2700,7 +2896,7 @@ if test "$GXX" = yes; then
     # linker, instead of GNU ld.  If possible, this setting should
     # overridden to take advantage of the native linker features on
     # the platform it is being used on.
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
   fi
 
   # Commands to make compiler produce verbose output that lists
@@ -2744,6 +2940,7 @@ case $host_os in
 	    ;;
 	  esac
 	done
+	;;
       esac
 
       exp_sym_flag='-bexport'
@@ -2762,7 +2959,7 @@ case $host_os in
     _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
 
     if test "$GXX" = yes; then
-      case $host_os in aix4.[012]|aix4.[012].*)
+      case $host_os in aix4.[[012]]|aix4.[[012]].*)
       # We only want to do this on AIX 4.2 and lower, the check
       # below for broken collect2 doesn't work under 4.3+
 	collect2name=`${CC} -print-prog-name=collect2`
@@ -2770,7 +2967,7 @@ case $host_os in
 	   strings "$collect2name" | grep resolve_lib_name >/dev/null
 	then
 	  # We have reworked collect2
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	  :
 	else
 	  # We have old collect2
 	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
@@ -2781,8 +2978,12 @@ case $host_os in
 	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
 	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
 	fi
+	;;
       esac
       shared_flag='-shared'
+      if test "$aix_use_runtimelinking" = yes; then
+	shared_flag="$shared_flag "'${wl}-G'
+      fi
     else
       # not using gcc
       if test "$host_cpu" = ia64; then
@@ -2809,12 +3010,12 @@ case $host_os in
       _LT_AC_SYS_LIBPATH_AIX
       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
 
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
      else
       if test "$host_cpu" = ia64; then
 	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
 	_LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
       else
 	# Determine the default libpath from the value encoded in an empty executable.
 	_LT_AC_SYS_LIBPATH_AIX
@@ -2823,16 +3024,26 @@ case $host_os in
 	# -berok will link without error, but may produce a broken library.
 	_LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
 	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	# -bexpall does not export symbols beginning with underscore (_)
-	_LT_AC_TAGVAR(always_export_symbols, $1)=yes
 	# Exported symbols can be pulled into shared objects from archives
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
 	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-	# This is similar to how AIX traditionally builds it's shared libraries.
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	# This is similar to how AIX traditionally builds its shared libraries.
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
       fi
     fi
     ;;
+
+  beos*)
+    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+      # support --undefined.  This deserves some investigation.  FIXME
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    else
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    fi
+    ;;
+
   chorus*)
     case $cc_basename in
       *)
@@ -2851,7 +3062,7 @@ case $host_os in
     _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
 
     if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
       # If the export-symbols file already is a .def file (1st line
       # is EXPORTS), use it as is; otherwise, prepend...
       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
@@ -2860,57 +3071,81 @@ case $host_os in
 	echo EXPORTS > $output_objdir/$soname.def;
 	cat $export_symbols >> $output_objdir/$soname.def;
       fi~
-      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
     else
       _LT_AC_TAGVAR(ld_shlibs, $1)=no
     fi
   ;;
+      darwin* | rhapsody*)
+        case $host_os in
+        rhapsody* | darwin1.[[012]])
+         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[[012]])
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+        esac
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
 
-  darwin* | rhapsody*)
-   if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then 
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    case "$host_os" in
-    rhapsody* | darwin1.[[012]])
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-      ;;
-    *) # Darwin 1.3 on
-      test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-      ;;
-    esac
-    	lt_int_apple_cc_single_mod=no
-    	output_verbose_link_cmd='echo'
-    	if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-    	  lt_int_apple_cc_single_mod=yes
-    	fi
-    	if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-    	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-    	else
-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+    if test "$GXX" = yes ; then
+      lt_int_apple_cc_single_mod=no
+      output_verbose_link_cmd='echo'
+      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
+       lt_int_apple_cc_single_mod=yes
       fi
-      _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-
-    # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
       if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
       else
-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+        fi
+        _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          else
+            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          fi
+            _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
+          _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         _LT_AC_TAGVAR(ld_shlibs, $1)=no
+          ;;
+      esac
       fi
-        _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag  -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    _LT_AC_TAGVAR(hardcode_direct, $1)=no
-    _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-   fi 
-    ;;
+        ;;
 
   dgux*)
     case $cc_basename in
-      ec++)
+      ec++*)
 	# FIXME: insert proper C++ library support
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
 	;;
-      ghcx)
+      ghcx*)
 	# Green Hills C++ Compiler
 	# FIXME: insert proper C++ library support
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
@@ -2921,14 +3156,14 @@ case $host_os in
 	;;
     esac
     ;;
-  freebsd[12]*)
+  freebsd[[12]]*)
     # C++ shared libraries reported to be fairly broken before switch to ELF
     _LT_AC_TAGVAR(ld_shlibs, $1)=no
     ;;
   freebsd-elf*)
     _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
     ;;
-  freebsd*)
+  freebsd* | dragonfly*)
     # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
     # conventions
     _LT_AC_TAGVAR(ld_shlibs, $1)=yes
@@ -2945,11 +3180,11 @@ case $host_os in
 				# location of the library.
 
     case $cc_basename in
-    CC)
+    CC*)
       # FIXME: insert proper C++ library support
       _LT_AC_TAGVAR(ld_shlibs, $1)=no
       ;;
-    aCC)
+    aCC*)
       _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       # Commands to make compiler produce verbose output that lists
       # what "hidden" libraries, object files and flags are used when
@@ -2959,7 +3194,7 @@ case $host_os in
       # explicitly linking system object files so we need to strip them
       # from the output so that they don't get included in the library
       # dependencies.
-      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
       ;;
     *)
       if test "$GXX" = yes; then
@@ -2973,34 +3208,21 @@ case $host_os in
     ;;
   hpux10*|hpux11*)
     if test $with_gnu_ld = no; then
-      case "$host_cpu" in
-      hppa*64*)
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-        ;;
-      ia64*)
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-        ;;
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+      case $host_cpu in
+      hppa*64*|ia64*) ;;
       *)
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
 	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
         ;;
       esac
     fi
-    case "$host_cpu" in
-    hppa*64*)
+    case $host_cpu in
+    hppa*64*|ia64*)
       _LT_AC_TAGVAR(hardcode_direct, $1)=no
       _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
-    ia64*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-					      # but as the default
-					      # location of the library.
-      ;;
     *)
       _LT_AC_TAGVAR(hardcode_direct, $1)=yes
       _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
@@ -3010,14 +3232,17 @@ case $host_os in
     esac
 
     case $cc_basename in
-      CC)
+      CC*)
 	# FIXME: insert proper C++ library support
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
 	;;
-      aCC)
-	case "$host_cpu" in
-	hppa*64*|ia64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
+      aCC*)
+	case $host_cpu in
+	hppa*64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	  ;;
 	*)
 	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
@@ -3036,9 +3261,12 @@ case $host_os in
       *)
 	if test "$GXX" = yes; then
 	  if test $with_gnu_ld = no; then
-	    case "$host_cpu" in
-	    ia64*|hppa*64*)
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
+	    case $host_cpu in
+	    hppa*64*)
+	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    ia64*)
+	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	      ;;
 	    *)
 	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
@@ -3052,11 +3280,25 @@ case $host_os in
 	;;
     esac
     ;;
+  interix[[3-9]]*)
+    _LT_AC_TAGVAR(hardcode_direct, $1)=no
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+    # Instead, shared libraries are loaded at an image base (0x10000000 by
+    # default) and relocated if they conflict, which is a slow very memory
+    # consuming and fragmenting process.  To avoid this, we pick a random,
+    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+    ;;
   irix5* | irix6*)
     case $cc_basename in
-      CC)
+      CC*)
 	# SGI C++
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
 
 	# Archives containing C++ object files must be created using
 	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
@@ -3067,7 +3309,7 @@ case $host_os in
       *)
 	if test "$GXX" = yes; then
 	  if test "$with_gnu_ld" = no; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	  else
 	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
 	  fi
@@ -3078,9 +3320,9 @@ case $host_os in
     _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
     _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
     ;;
-  linux*)
+  linux* | k*bsd*-gnu)
     case $cc_basename in
-      KCC)
+      KCC*)
 	# Kuck and Associates, Inc. (KAI) C++ Compiler
 
 	# KCC will only create a shared library if the output file
@@ -3105,17 +3347,41 @@ case $host_os in
 	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
 	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
 	;;
-      icpc)
+      icpc*)
 	# Intel C++
 	with_gnu_ld=yes
+	# version 8.0 and above of icpc choke on multiply defined symbols
+	# if we add $predep_objects and $postdep_objects, however 7.1 and
+	# earlier do not add the objects themselves.
+	case `$CC -V 2>&1` in
+	*"Version 7."*)
+  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+  	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	*)  # Version 8.0 or newer
+	  tmp_idyn=
+	  case $host_cpu in
+	    ia64*) tmp_idyn=' -i_dynamic';;
+	  esac
+  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	esac
 	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
 	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
 	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
 	;;
-      cxx)
+      pgCC*)
+        # Portland Group C++ compiler
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+  	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+        ;;
+      cxx*)
 	# Compaq C++
 	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
 	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
@@ -3134,6 +3400,29 @@ case $host_os in
 	# dependencies.
 	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
 	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)
+	  # Sun C++ 5.9
+	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+
+	  # Not sure whether something based on
+	  # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	  # would be better.
+	  output_verbose_link_cmd='echo'
+
+	  # Archives containing C++ object files must be created using
+	  # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	  # necessary to make sure instantiated templates are included
+	  # in the archive.
+	  _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	  ;;
+	esac
+	;;
     esac
     ;;
   lynxos*)
@@ -3146,7 +3435,7 @@ case $host_os in
     ;;
   mvs*)
     case $cc_basename in
-      cxx)
+      cxx*)
 	# FIXME: insert proper C++ library support
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
 	;;
@@ -3167,9 +3456,29 @@ case $host_os in
     # Workaround some broken pre-1.5 toolchains
     output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
     ;;
+  openbsd2*)
+    # C++ shared libraries are fairly broken
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  openbsd*)
+    if test -f /usr/libexec/ld.so; then
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      fi
+      output_verbose_link_cmd='echo'
+    else
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    fi
+    ;;
   osf3*)
     case $cc_basename in
-      KCC)
+      KCC*)
 	# Kuck and Associates, Inc. (KAI) C++ Compiler
 
 	# KCC will only create a shared library if the output file
@@ -3185,14 +3494,14 @@ case $host_os in
 	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
 
 	;;
-      RCC)
+      RCC*)
 	# Rational C++ 2.4.1
 	# FIXME: insert proper C++ library support
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
 	;;
-      cxx)
+      cxx*)
 	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
 
 	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
 	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
@@ -3210,7 +3519,7 @@ case $host_os in
       *)
 	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
 	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 
 	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
 	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
@@ -3229,7 +3538,7 @@ case $host_os in
     ;;
   osf4* | osf5*)
     case $cc_basename in
-      KCC)
+      KCC*)
 	# Kuck and Associates, Inc. (KAI) C++ Compiler
 
 	# KCC will only create a shared library if the output file
@@ -3244,17 +3553,17 @@ case $host_os in
 	# the KAI C++ compiler.
 	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
 	;;
-      RCC)
+      RCC*)
 	# Rational C++ 2.4.1
 	# FIXME: insert proper C++ library support
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
 	;;
-      cxx)
+      cxx*)
 	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
 	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
 	  echo "-hidden">> $lib.exp~
-	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry $objdir/so_locations -o $lib~
+	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
 	  $rm $lib.exp'
 
 	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -3273,7 +3582,7 @@ case $host_os in
       *)
 	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
 	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 
 	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
 	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
@@ -3294,27 +3603,14 @@ case $host_os in
     # FIXME: insert proper C++ library support
     _LT_AC_TAGVAR(ld_shlibs, $1)=no
     ;;
-  sco*)
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    case $cc_basename in
-      CC)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
   sunos4*)
     case $cc_basename in
-      CC)
+      CC*)
 	# Sun C++ 4.x
 	# FIXME: insert proper C++ library support
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
 	;;
-      lcc)
+      lcc*)
 	# Lucid
 	# FIXME: insert proper C++ library support
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
@@ -3327,36 +3623,28 @@ case $host_os in
     ;;
   solaris*)
     case $cc_basename in
-      CC)
+      CC*)
 	# Sun C++ 4.2, 5.x and Centerline C++
+        _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
 	_LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	$CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
 
 	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
 	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
 	case $host_os in
-	  solaris2.[0-5] | solaris2.[0-5].*) ;;
+	  solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
 	  *)
-	    # The C++ compiler is used as linker so we must use $wl
-	    # flag to pass the commands to the underlying system
-	    # linker.
+	    # The compiler driver will combine and reorder linker options,
+	    # but understands `-z linker_flag'.
 	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
 	    ;;
 	esac
 	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
 
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	output_verbose_link_cmd='echo'
 
 	# Archives containing C++ object files must be created using
 	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
@@ -3364,7 +3652,7 @@ case $host_os in
 	# in the archive.
 	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
 	;;
-      gcx)
+      gcx*)
 	# Green Hills C++ Compiler
 	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
 
@@ -3398,16 +3686,73 @@ case $host_os in
 	  fi
 
 	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+	  case $host_os in
+	  solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+	  *)
+	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	    ;;
+	  esac
 	fi
 	;;
     esac
     ;;
-  sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
+  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
     _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    runpath_var='LD_RUN_PATH'
+
+    case $cc_basename in
+      CC*)
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      *)
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+    esac
+    ;;
+  sysv5* | sco3.2v5* | sco5v6*)
+    # Note: We can NOT use -z defs as we might desire, because we do not
+    # link with -lc, and that would cause any symbols used from libc to
+    # always be unresolved, which means just about no library would
+    # ever link correctly.  If we're not using GNU ld we use -z text
+    # though, which does catch some bad symbols but isn't as heavy-handed
+    # as -z defs.
+    # For security reasons, it is highly recommended that you always
+    # use absolute paths for naming shared libraries, and exclude the
+    # DT_RUNPATH tag from executables and libraries.  But doing so
+    # requires that you compile everything twice, which is a pain.
+    # So that behaviour is only enabled if SCOABSPATH is set to a
+    # non-empty value in the environment.  Most likely only useful for
+    # creating official distributions of packages.
+    # This is a hack until libtool officially supports absolute path
+    # names for shared libraries.
+    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+    _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+    runpath_var='LD_RUN_PATH'
+
+    case $cc_basename in
+      CC*)
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      *)
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+    esac
     ;;
   tandem*)
     case $cc_basename in
-      NCC)
+      NCC*)
 	# NonStop-UX NCC 3.20
 	# FIXME: insert proper C++ library support
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
@@ -3442,10 +3787,8 @@ AC_LIBTOOL_PROG_COMPILER_PIC($1)
 AC_LIBTOOL_PROG_CC_C_O($1)
 AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
 AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
 AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_DLOPEN_SELF($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
 
 AC_LIBTOOL_CONFIG($1)
 
@@ -3463,7 +3806,7 @@ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
 ])# AC_LIBTOOL_LANG_CXX_CONFIG
 
 # AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
-# ------------------------
+# ------------------------------------
 # Figure out "hidden" library dependencies from verbose
 # compiler output when linking a shared library.
 # Parse the compiler output and extract the necessary
@@ -3517,7 +3860,7 @@ if AC_TRY_EVAL(ac_compile); then
   # The `*' in the case matches for architectures that use `case' in
   # $output_verbose_cmd can trigger glob expansion during the loop
   # eval without this substitution.
-  output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
+  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
 
   for p in `eval $output_verbose_link_cmd`; do
     case $p in
@@ -3593,13 +3936,70 @@ fi
 
 $rm -f confest.$objext
 
+# PORTME: override above test on systems where it is broken
+ifelse([$1],[CXX],
+[case $host_os in
+interix[[3-9]]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  _LT_AC_TAGVAR(predep_objects,$1)=
+  _LT_AC_TAGVAR(postdep_objects,$1)=
+  _LT_AC_TAGVAR(postdeps,$1)=
+  ;;
+
+linux*)
+  case `$CC -V 2>&1 | sed 5q` in
+  *Sun\ C*)
+    # Sun C++ 5.9
+    #
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC*)
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+esac
+])
+
 case " $_LT_AC_TAGVAR(postdeps, $1) " in
 *" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
 esac
 ])# AC_LIBTOOL_POSTDEP_PREDEP
 
 # AC_LIBTOOL_LANG_F77_CONFIG
-# ------------------------
+# --------------------------
 # Ensure that the configuration vars for the C compiler are
 # suitably defined.  Those variables are subsequently used by
 # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
@@ -3635,20 +4035,31 @@ objext=o
 _LT_AC_TAGVAR(objext, $1)=$objext
 
 # Code to be used in simple compile tests
-lt_simple_compile_test_code="      subroutine t\n      return\n      end\n"
+lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
 
 # Code to be used in simple link tests
-lt_simple_link_test_code="      program t\n      end\n"
+lt_simple_link_test_code="\
+      program t
+      end
+"
 
 # ltmain only uses $CC for tagged configurations so make sure $CC is set.
 _LT_AC_SYS_COMPILER
 
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
 # Allow CC to be a program name with arguments.
 lt_save_CC="$CC"
 CC=${F77-"f77"}
 compiler=$CC
 _LT_AC_TAGVAR(compiler, $1)=$CC
-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+_LT_CC_BASENAME([$compiler])
 
 AC_MSG_CHECKING([if libtool supports shared libraries])
 AC_MSG_RESULT([$can_build_shared])
@@ -3658,7 +4069,7 @@ test "$can_build_shared" = "no" && enable_shared=no
 
 # On AIX, shared libraries and static libraries use the same namespace, and
 # are all built from PIC.
-case "$host_os" in
+case $host_os in
 aix3*)
   test "$enable_shared" = yes && enable_static=no
   if test -n "$RANLIB"; then
@@ -3666,8 +4077,10 @@ aix3*)
     postinstall_cmds='$RANLIB $lib'
   fi
   ;;
-aix4*)
-  test "$enable_shared" = yes && enable_static=no
+aix4* | aix5*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
   ;;
 esac
 AC_MSG_RESULT([$enable_shared])
@@ -3677,8 +4090,6 @@ AC_MSG_CHECKING([whether to build static libraries])
 test "$enable_shared" = yes || enable_static=yes
 AC_MSG_RESULT([$enable_static])
 
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
 _LT_AC_TAGVAR(GCC, $1)="$G77"
 _LT_AC_TAGVAR(LD, $1)="$LD"
 
@@ -3686,9 +4097,8 @@ AC_LIBTOOL_PROG_COMPILER_PIC($1)
 AC_LIBTOOL_PROG_CC_C_O($1)
 AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
 AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
 AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
 
 AC_LIBTOOL_CONFIG($1)
 
@@ -3714,23 +4124,30 @@ objext=o
 _LT_AC_TAGVAR(objext, $1)=$objext
 
 # Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}\n"
+lt_simple_compile_test_code="class foo {}"
 
 # Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
 
 # ltmain only uses $CC for tagged configurations so make sure $CC is set.
 _LT_AC_SYS_COMPILER
 
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
 # Allow CC to be a program name with arguments.
 lt_save_CC="$CC"
 CC=${GCJ-"gcj"}
 compiler=$CC
 _LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
 
 # GCJ did not exist at the time GCC didn't implicitly link libc in.
 _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
 
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+
 ## CAVEAT EMPTOR:
 ## There is no encapsulation within the following macros, do not change
 ## the running order or otherwise move them around unless you know exactly
@@ -3740,10 +4157,8 @@ AC_LIBTOOL_PROG_COMPILER_PIC($1)
 AC_LIBTOOL_PROG_CC_C_O($1)
 AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
 AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
 AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_DLOPEN_SELF($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
 
 AC_LIBTOOL_CONFIG($1)
 
@@ -3753,7 +4168,7 @@ CC="$lt_save_CC"
 
 
 # AC_LIBTOOL_LANG_RC_CONFIG
-# --------------------------
+# -------------------------
 # Ensure that the configuration vars for the Windows resource compiler are
 # suitably defined.  Those variables are subsequently used by
 # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
@@ -3769,7 +4184,7 @@ objext=o
 _LT_AC_TAGVAR(objext, $1)=$objext
 
 # Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
 
 # Code to be used in simple link tests
 lt_simple_link_test_code="$lt_simple_compile_test_code"
@@ -3777,11 +4192,16 @@ lt_simple_link_test_code="$lt_simple_compile_test_code"
 # ltmain only uses $CC for tagged configurations so make sure $CC is set.
 _LT_AC_SYS_COMPILER
 
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
 # Allow CC to be a program name with arguments.
 lt_save_CC="$CC"
 CC=${RC-"windres"}
 compiler=$CC
 _LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
 _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
 
 AC_LIBTOOL_CONFIG($1)
@@ -3807,11 +4227,12 @@ if test -f "$ltmain"; then
   # without removal of \ escapes.
   if test -n "${ZSH_VERSION+set}" ; then
     setopt NO_GLOB_SUBST
-  fi  
+  fi
   # Now quote all the things that may contain metacharacters while being
   # careful not to overquote the AC_SUBSTed values.  We take copies of the
   # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
     libname_spec library_names_spec soname_spec extract_expsyms_cmds \
     old_striplib striplib file_magic_cmd finish_cmds finish_eval \
     deplibs_check_method reload_flag reload_cmds need_locks \
@@ -3852,6 +4273,7 @@ if test -f "$ltmain"; then
     _LT_AC_TAGVAR(module_cmds, $1) \
     _LT_AC_TAGVAR(module_expsym_cmds, $1) \
     _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
+    _LT_AC_TAGVAR(fix_srcfile_path, $1) \
     _LT_AC_TAGVAR(exclude_expsyms, $1) \
     _LT_AC_TAGVAR(include_expsyms, $1); do
 
@@ -3861,7 +4283,7 @@ if test -f "$ltmain"; then
     _LT_AC_TAGVAR(archive_cmds, $1) | \
     _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
     _LT_AC_TAGVAR(module_cmds, $1) | \
-    _LT_AC_TAGVAR(module_expsym_cmds, $1) | \   
+    _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
     _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
     _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
     extract_expsyms_cmds | reload_cmds | finish_cmds | \
@@ -3898,7 +4320,7 @@ ifelse([$1], [],
 # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
 #
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
 # Free Software Foundation, Inc.
 #
 # This file is part of GNU Libtool:
@@ -3916,7 +4338,7 @@ ifelse([$1], [],
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -3927,11 +4349,11 @@ ifelse([$1], [],
 SED=$lt_SED
 
 # Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e s/^X//"
+Xsed="$SED -e 1s/^X//"
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 # The names of the tagged configurations supported by this script.
 available_tags=
@@ -3962,6 +4384,12 @@ fast_install=$enable_fast_install
 # The host system.
 host_alias=$host_alias
 host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
 
 # An echo program that does not interpret backslashes.
 echo=$lt_echo
@@ -3973,6 +4401,9 @@ AR_FLAGS=$lt_AR_FLAGS
 # A C compiler.
 LTCC=$lt_LTCC
 
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
 # A language-specific compiler.
 CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
 
@@ -3992,7 +4423,7 @@ LN_S=$lt_LN_S
 NM=$lt_NM
 
 # A symbol stripping program
-STRIP=$STRIP
+STRIP=$lt_STRIP
 
 # Used to examine libraries when file_magic_cmd begins "file"
 MAGIC_CMD=$MAGIC_CMD
@@ -4023,7 +4454,7 @@ objext="$ac_objext"
 libext="$libext"
 
 # Shared library suffix (normally ".so").
-shrext='$shrext'
+shrext_cmds='$shrext_cmds'
 
 # Executable file suffix (normally "").
 exeext="$exeext"
@@ -4038,7 +4469,7 @@ max_cmd_len=$lt_cv_sys_max_cmd_len
 # Does compiler simultaneously support -c and -o options?
 compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
 
-# Must we lock files when doing compilation ?
+# Must we lock files when doing compilation?
 need_locks=$lt_need_locks
 
 # Do we need the lib prefix for modules?
@@ -4214,7 +4645,7 @@ sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
 # Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
+fix_srcfile_path=$lt_fix_srcfile_path
 
 # Set to yes if exported symbols are required.
 always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
@@ -4267,7 +4698,10 @@ else
   # If there is no Makefile yet, we rely on a make rule to execute
   # `config.status --recheck' to rerun these tests and create the
   # libtool script then.
-  test -f Makefile && make "$ltmain"
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
 fi
 ])# AC_LIBTOOL_CONFIG
 
@@ -4294,6 +4728,7 @@ fi
 # ---------------------------------
 AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
 [AC_REQUIRE([AC_CANONICAL_HOST])
+AC_REQUIRE([LT_AC_PROG_SED])
 AC_REQUIRE([AC_PROG_NM])
 AC_REQUIRE([AC_OBJEXT])
 # Check for command to grab the raw symbol name followed by C symbol from nm.
@@ -4309,9 +4744,6 @@ symcode='[[BCDEGRST]]'
 # Regexp to match symbols that can be accessed directly from C.
 sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
 
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \2\3 \3'
-
 # Transform an extracted symbol line into a proper C declaration
 lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
 
@@ -4333,14 +4765,30 @@ hpux*) # Its linker distinguishes data from code symbols
   lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
   lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
   ;;
+linux* | k*bsd*-gnu)
+  if test "$host_cpu" = ia64; then
+    symcode='[[ABCDGIRSTW]]'
+    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  fi
+  ;;
 irix* | nonstopux*)
   symcode='[[BCDEGRST]]'
   ;;
 osf*)
   symcode='[[BCDEGQRST]]'
   ;;
-solaris* | sysv5*)
-  symcode='[[BDT]]'
+solaris*)
+  symcode='[[BDRT]]'
+  ;;
+sco3.2v5*)
+  symcode='[[DT]]'
+  ;;
+sysv4.2uw2*)
+  symcode='[[DT]]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[[ABDT]]'
   ;;
 sysv4)
   symcode='[[DFNSTU]]'
@@ -4358,14 +4806,17 @@ esac
 # If we're using GNU nm, then use its standard symbol codes.
 case `$NM -V 2>&1` in
 *GNU* | *'with BFD'*)
-  symcode='[[ABCDGISTW]]' ;;
+  symcode='[[ABCDGIRSTW]]' ;;
 esac
 
 # Try without a prefix undercore, then with it.
 for ac_symprfx in "" "_"; do
 
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
   # Write the raw and C identifiers.
-  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
+  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
 
   # Check to see that the pipe works correctly.
   pipe_works=no
@@ -4504,12 +4955,14 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       # like `-m68040'.
       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
       ;;
-    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
       # PIC is the default for these OSes.
       ;;
-    mingw* | os2* | pw32*)
+    mingw* | cygwin* | os2* | pw32*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
       ;;
     darwin* | rhapsody*)
@@ -4521,6 +4974,10 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       # DJGPP does not support shared libraries at all
       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
       ;;
+    interix[[3-9]]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
     sysv4*MP*)
       if test -d /usr/nec; then
 	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
@@ -4529,7 +4986,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
     hpux*)
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
-      case "$host_cpu" in
+      case $host_cpu in
       hppa*64*|ia64*)
 	;;
       *)
@@ -4554,18 +5011,28 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	;;
       chorus*)
 	case $cc_basename in
-	cxch68)
+	cxch68*)
 	  # Green Hills C++ Compiler
 	  # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
 	  ;;
 	esac
 	;;
+       darwin*)
+         # PIC is the default on this platform
+         # Common symbols not allowed in MH_DYLIB files
+         case $cc_basename in
+           xlc*)
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
+           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+           ;;
+         esac
+       ;;
       dgux*)
 	case $cc_basename in
-	  ec++)
+	  ec++*)
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    ;;
-	  ghcx)
+	  ghcx*)
 	    # Green Hills C++ Compiler
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
 	    ;;
@@ -4573,22 +5040,22 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	    ;;
 	esac
 	;;
-      freebsd*)
+      freebsd* | dragonfly*)
 	# FreeBSD uses GNU C++
 	;;
       hpux9* | hpux10* | hpux11*)
 	case $cc_basename in
-	  CC)
+	  CC*)
 	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
 	    if test "$host_cpu" != ia64; then
 	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
 	    fi
 	    ;;
-	  aCC)
+	  aCC*)
 	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-	    case "$host_cpu" in
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    case $host_cpu in
 	    hppa*64*|ia64*)
 	      # +Z the default
 	      ;;
@@ -4601,9 +5068,13 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	    ;;
 	esac
 	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
       irix5* | irix6* | nonstopux*)
 	case $cc_basename in
-	  CC)
+	  CC*)
 	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
 	    # CC pic flag -KPIC is the default.
@@ -4612,20 +5083,26 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	    ;;
 	esac
 	;;
-      linux*)
+      linux* | k*bsd*-gnu)
 	case $cc_basename in
-	  KCC)
+	  KCC*)
 	    # KAI C++ Compiler
 	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
 	    ;;
-	  icpc)
+	  icpc* | ecpc*)
 	    # Intel C++
 	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-	    ;; 
-	  cxx)
+	    ;;
+	  pgCC*)
+	    # Portland Group C++ compiler.
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  cxx*)
 	    # Compaq C++
 	    # Make sure the PIC flag is empty.  It appears that all Alpha
 	    # Linux and Compaq Tru64 Unix objects are PIC.
@@ -4633,6 +5110,14 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
 	    ;;
 	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	      ;;
+	    esac
 	    ;;
 	esac
 	;;
@@ -4642,7 +5127,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	;;
       mvs*)
 	case $cc_basename in
-	  cxx)
+	  cxx*)
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
 	    ;;
 	  *)
@@ -4653,14 +5138,14 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	;;
       osf3* | osf4* | osf5*)
 	case $cc_basename in
-	  KCC)
+	  KCC*)
 	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
 	    ;;
-	  RCC)
+	  RCC*)
 	    # Rational C++ 2.4.1
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
 	    ;;
-	  cxx)
+	  cxx*)
 	    # Digital/Compaq C++
 	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    # Make sure the PIC flag is empty.  It appears that all Alpha
@@ -4674,24 +5159,15 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	;;
       psos*)
 	;;
-      sco*)
-	case $cc_basename in
-	  CC)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
       solaris*)
 	case $cc_basename in
-	  CC)
+	  CC*)
 	    # Sun C++ 4.2, 5.x and Centerline C++
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
 	    ;;
-	  gcx)
+	  gcx*)
 	    # Green Hills C++ Compiler
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
 	    ;;
@@ -4701,12 +5177,12 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	;;
       sunos4*)
 	case $cc_basename in
-	  CC)
+	  CC*)
 	    # Sun C++ 4.x
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
 	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	    ;;
-	  lcc)
+	  lcc*)
 	    # Lucid
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
 	    ;;
@@ -4716,7 +5192,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	;;
       tandem*)
 	case $cc_basename in
-	  NCC)
+	  NCC*)
 	    # NonStop-UX NCC 3.20
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    ;;
@@ -4724,7 +5200,14 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	    ;;
 	esac
 	;;
-      unixware*)
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	esac
 	;;
       vxworks*)
 	;;
@@ -4755,13 +5238,15 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
       ;;
 
-    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
       # PIC is the default for these OSes.
       ;;
 
-    mingw* | pw32* | os2*)
+    mingw* | cygwin* | pw32* | os2*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
       ;;
 
@@ -4771,6 +5256,11 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
       ;;
 
+    interix[[3-9]]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
     msdosdjgpp*)
       # Just because we use GCC doesn't mean we suddenly get shared libraries
       # on systems that don't support them.
@@ -4787,7 +5277,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
     hpux*)
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
-      case "$host_cpu" in
+      case $host_cpu in
       hppa*64*|ia64*)
 	# +Z the default
 	;;
@@ -4813,8 +5303,18 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
       fi
       ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case $cc_basename in
+         xlc*)
+         _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
+         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+         ;;
+       esac
+       ;;
 
-    mingw* | pw32* | os2*)
+    mingw* | cygwin* | pw32* | os2*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
@@ -4824,7 +5324,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
-      case "$host_cpu" in
+      case $host_cpu in
       hppa*64*|ia64*)
 	# +Z the default
 	;;
@@ -4847,18 +5347,41 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       ;;
 
-    linux*)
-      case $CC in
-      icc|ecc)
+    linux* | k*bsd*-gnu)
+      case $cc_basename in
+      icc* | ecc*)
 	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
         ;;
-      ccc)
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+        ;;
+      ccc*)
         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
         # All Alpha code is PIC.
         _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
         ;;
+      *)
+        case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)
+	  # Sun C 5.9
+	  _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  ;;
+	*Sun\ F*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=''
+	  ;;
+	esac
+	;;
       esac
       ;;
 
@@ -4868,15 +5391,19 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
       ;;
 
-    sco3.2v5*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
+    rdos*)
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
       ;;
 
     solaris*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+      *)
+	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+      esac
       ;;
 
     sunos4*)
@@ -4885,7 +5412,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       ;;
 
-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+    sysv4 | sysv4.2uw2* | sysv4.3*)
       _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
@@ -4898,6 +5425,17 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       fi
       ;;
 
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    unicos*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+
     uts4*)
       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
@@ -4925,7 +5463,7 @@ if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
     [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
 fi
-case "$host_os" in
+case $host_os in
   # For platforms which do not support PIC, -DPIC is meaningless:
   *djgpp*)
     _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
@@ -4934,6 +5472,16 @@ case "$host_os" in
     _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
     ;;
 esac
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
+AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+  _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
+  $lt_tmp_static_flag,
+  [],
+  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
 ])
 
 
@@ -4941,7 +5489,8 @@ esac
 # ------------------------------------
 # See if the linker supports building shared libraries.
 AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
-[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
 ifelse([$1],[CXX],[
   _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   case $host_os in
@@ -4958,7 +5507,7 @@ ifelse([$1],[CXX],[
     _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
   ;;
   cygwin* | mingw*)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
   ;;
   *)
     _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
@@ -4984,7 +5533,7 @@ ifelse([$1],[CXX],[
   _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
   _LT_AC_TAGVAR(hardcode_automatic, $1)=no
   _LT_AC_TAGVAR(module_cmds, $1)=
-  _LT_AC_TAGVAR(module_expsym_cmds, $1)=  
+  _LT_AC_TAGVAR(module_expsym_cmds, $1)=
   _LT_AC_TAGVAR(always_export_symbols, $1)=no
   _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   # include_expsyms should be a list of space-separated symbols to be *always*
@@ -5001,7 +5550,8 @@ ifelse([$1],[CXX],[
   # rely on this symbol name, it's probably fine to never include it in
   # preloaded symbol tables.
   extract_expsyms_cmds=
-
+  # Just being paranoid about ensuring that cc_basename is set.
+  _LT_CC_BASENAME([$compiler])
   case $host_os in
   cygwin* | mingw* | pw32*)
     # FIXME: the MSVC++ port hasn't been tested in a loooong time
@@ -5011,6 +5561,10 @@ ifelse([$1],[CXX],[
       with_gnu_ld=no
     fi
     ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
   openbsd*)
     with_gnu_ld=no
     ;;
@@ -5021,6 +5575,27 @@ ifelse([$1],[CXX],[
     # If archive_cmds runs LD, not CC, wlarc should be empty
     wlarc='${wl}'
 
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>/dev/null` in
+      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
     # See if GNU ld supports shared libraries.
     case $host_os in
     aix3* | aix4* | aix5*)
@@ -5071,10 +5646,10 @@ EOF
       _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
       _LT_AC_TAGVAR(always_export_symbols, $1)=no
       _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
 
       if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 	# If the export-symbols file already is a .def file (1st line
 	# is EXPORTS), use it as is; otherwise, prepend...
 	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
@@ -5083,9 +5658,64 @@ EOF
 	  echo EXPORTS > $output_objdir/$soname.def;
 	  cat $export_symbols >> $output_objdir/$soname.def;
 	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000  ${wl}--out-implib,$lib'
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
       else
-	ld_shlibs=no
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    interix[[3-9]]*)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | k*bsd*-gnu)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	tmp_addflag=
+	case $cc_basename,$host_cpu in
+	pgcc*)				# Portland Group C compiler
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	*)
+	  tmp_sharedflag='-shared' ;;
+	esac
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+	if test $supports_anon_versioning = yes; then
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+  $echo "local: *; };" >> $output_objdir/$libname.ver~
+	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	fi
+      else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
@@ -5099,7 +5729,7 @@ EOF
       fi
       ;;
 
-    solaris* | sysv5*)
+    solaris*)
       if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
 	cat <<EOF 1>&2
@@ -5120,6 +5750,33 @@ EOF
       fi
       ;;
 
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  else
+	    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	  fi
+	;;
+      esac
+      ;;
+
     sunos4*)
       _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
       wlarc=
@@ -5137,16 +5794,11 @@ EOF
       ;;
     esac
 
-    if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
-      runpath_var=LD_RUN_PATH
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-      # ancient GNU ld didn't support --whole-archive et. al.
-      if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- 	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-      fi
+    if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
+      runpath_var=
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
     fi
   else
     # PORTME fill in a description of your system's linker (not GNU ld)
@@ -5158,7 +5810,7 @@ EOF
       # Note: this linker hardcodes the directories in LIBPATH if there
       # are no directories specified by -L.
       _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      if test "$GCC" = yes && test -z "$link_static_flag"; then
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
 	# Neither direct hardcoding nor static linking is supported with a
 	# broken collect2.
 	_LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
@@ -5192,6 +5844,7 @@ EOF
   	    break
   	  fi
 	  done
+	  ;;
 	esac
 
 	exp_sym_flag='-bexport'
@@ -5210,7 +5863,7 @@ EOF
       _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
 
       if test "$GCC" = yes; then
-	case $host_os in aix4.[012]|aix4.[012].*)
+	case $host_os in aix4.[[012]]|aix4.[[012]].*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
 	  collect2name=`${CC} -print-prog-name=collect2`
@@ -5218,7 +5871,7 @@ EOF
   	   strings "$collect2name" | grep resolve_lib_name >/dev/null
 	  then
   	  # We have reworked collect2
-  	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+  	  :
 	  else
   	  # We have old collect2
   	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
@@ -5229,8 +5882,12 @@ EOF
   	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
   	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
 	  fi
+	  ;;
 	esac
 	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
       else
 	# not using gcc
 	if test "$host_cpu" = ia64; then
@@ -5238,11 +5895,11 @@ EOF
   	# chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
 	else
-  	if test "$aix_use_runtimelinking" = yes; then
+	  if test "$aix_use_runtimelinking" = yes; then
 	    shared_flag='${wl}-G'
 	  else
 	    shared_flag='${wl}-bM:SRE'
-  	fi
+	  fi
 	fi
       fi
 
@@ -5256,12 +5913,12 @@ EOF
        # Determine the default libpath from the value encoded in an empty executable.
        _LT_AC_SYS_LIBPATH_AIX
        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
        else
 	if test "$host_cpu" = ia64; then
 	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
 	  _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
 	else
 	 # Determine the default libpath from the value encoded in an empty executable.
 	 _LT_AC_SYS_LIBPATH_AIX
@@ -5270,13 +5927,11 @@ EOF
 	  # -berok will link without error, but may produce a broken library.
 	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
 	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	  # -bexpall does not export symbols beginning with underscore (_)
-	  _LT_AC_TAGVAR(always_export_symbols, $1)=yes
 	  # Exported symbols can be pulled into shared objects from archives
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
 	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-	  # This is similar to how AIX traditionally builds it's shared libraries.
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
 	fi
       fi
       ;;
@@ -5289,7 +5944,7 @@ EOF
       _LT_AC_TAGVAR(ld_shlibs, $1)=no
       ;;
 
-    bsdi4*)
+    bsdi[[45]]*)
       _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
       ;;
 
@@ -5303,56 +5958,65 @@ EOF
       # Tell ltmain to make .lib files, not .a files.
       libext=lib
       # Tell ltmain to make .dll files, not .so files.
-      shrext=".dll"
+      shrext_cmds=".dll"
       # FIXME: Setting linknames here is a bad hack.
       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
       # The linker will automatically build a .lib file if we build a DLL.
       _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
       # FIXME: Should let the user specify the lib program.
-      _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path='`cygpath -w "$srcfile"`'
+      _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+      _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
       _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
       ;;
 
     darwin* | rhapsody*)
-    if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then 
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      case "$host_os" in
-      rhapsody* | darwin1.[[012]])
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-	;;
-      *) # Darwin 1.3 on
-	test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-	;;
+      case $host_os in
+        rhapsody* | darwin1.[[012]])
+         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[[012]])
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
       esac
-      # FIXME: Relying on posixy $() will cause problems for
-      #        cross-compilation, but unfortunately the echo tests do not
-      #        yet detect zsh echo's removal of \ escapes.  Also zsh mangles
-      #	       `"' quotes if we put them in here... so don't!
-    	lt_int_apple_cc_single_mod=no
-    	output_verbose_link_cmd='echo'
-    	if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-    	  lt_int_apple_cc_single_mod=yes
-    	fi
-    	if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-    	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-    	else
-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      fi
-      _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-        if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        else
-          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        fi
-          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag  -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
       _LT_AC_TAGVAR(hardcode_direct, $1)=no
       _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
       _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
       _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-    fi  
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
+         _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         _LT_AC_TAGVAR(ld_shlibs, $1)=no
+          ;;
+      esac
+    fi
       ;;
 
     dgux*)
@@ -5385,7 +6049,7 @@ EOF
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd*)
+    freebsd* | dragonfly*)
       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
       _LT_AC_TAGVAR(hardcode_direct, $1)=yes
@@ -5408,47 +6072,62 @@ EOF
       _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
       ;;
 
-    hpux10* | hpux11*)
+    hpux10*)
       if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case "$host_cpu" in
-	hppa*64*|ia64*)
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
 	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
+	ia64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
 	*)
 	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
-	case "$host_cpu" in
-	hppa*64*|ia64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
+	case $host_cpu in
+	hppa*64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       fi
       if test "$with_gnu_ld" = no; then
-	case "$host_cpu" in
-	hppa*64*)
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-	  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	  ;;
-	ia64*)
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-	  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
 
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+	  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
 	  ;;
 	*)
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
 	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
 	  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
 
@@ -5492,23 +6171,28 @@ EOF
       ;;
 
     openbsd*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      if test -f /usr/libexec/ld.so; then
+	_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+	     _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	     ;;
+	   *)
+	     _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+        fi
       else
-       case $host_os in
-	 openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-	   _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	   ;;
-	 *)
-	   _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	   ;;
-       esac
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
@@ -5541,7 +6225,7 @@ EOF
 	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
 	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
 	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -5549,21 +6233,15 @@ EOF
       _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
       ;;
 
-    sco3.2v5*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-      runpath_var=LD_RUN_PATH
-      hardcode_runpath_var=yes
-      ;;
-
     solaris*)
       _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
       if test "$GCC" = yes; then
+	wlarc='${wl}'
 	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
 	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
       else
+	wlarc=''
 	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
 	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
   	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
@@ -5572,8 +6250,17 @@ EOF
       _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
       case $host_os in
       solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-      *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	fi
+	;;
       esac
       _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
       ;;
@@ -5630,36 +6317,45 @@ EOF
       fi
       ;;
 
-    sysv4.2uw2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
       _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      hardcode_runpath_var=yes
-      runpath_var=LD_RUN_PATH
-      ;;
+      runpath_var='LD_RUN_PATH'
 
-   sysv5OpenUNIX8* | sysv5UnixWare7* |  sysv5uw[[78]]* | unixware7*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
       if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
-      runpath_var='LD_RUN_PATH'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
-    sysv5*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-      # $CC -shared without GNU ld will not create a library from C++
-      # object files and a static libstdc++, better avoid it by now
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
       _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
       runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
       ;;
 
     uts4*)
@@ -5677,11 +6373,6 @@ EOF
 AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
 test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
 
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
 #
 # Do we need to explicitly link libc?
 #
@@ -5701,14 +6392,15 @@ x|xyes)
       # to ld, don't add -lc before -lgcc.
       AC_MSG_CHECKING([whether -lc should be explicitly linked in])
       $rm conftest*
-      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-  
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
       if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
         soname=conftest
         lib=conftest
         libobjs=conftest.$ac_objext
         deplibs=
         wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
+	pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
         compiler_flags=-v
         linker_flags=-v
         verstring=
@@ -5803,6 +6495,30 @@ AC_DEFUN([LT_AC_PROG_RC],
 [AC_CHECK_TOOL(RC, windres, no)
 ])
 
+
+# Cheap backport of AS_EXECUTABLE_P and required macros
+# from Autoconf 2.59; we should not use $as_executable_p directly.
+
+# _AS_TEST_PREPARE
+# ----------------
+m4_ifndef([_AS_TEST_PREPARE],
+[m4_defun([_AS_TEST_PREPARE],
+[if test -x / >/dev/null 2>&1; then
+  as_executable_p='test -x'
+else
+  as_executable_p='test -f'
+fi
+])])# _AS_TEST_PREPARE
+
+# AS_EXECUTABLE_P
+# ---------------
+# Check whether a file is executable.
+m4_ifndef([AS_EXECUTABLE_P],
+[m4_defun([AS_EXECUTABLE_P],
+[AS_REQUIRE([_AS_TEST_PREPARE])dnl
+$as_executable_p $1[]dnl
+])])# AS_EXECUTABLE_P
+
 ############################################################
 # NOTE: This macro has been submitted for inclusion into   #
 #  GNU Autoconf as AC_PROG_SED.  When it is available in   #
@@ -5825,18 +6541,19 @@ do
   test -z "$as_dir" && as_dir=.
   for lt_ac_prog in sed gsed; do
     for ac_exec_ext in '' $ac_executable_extensions; do
-      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+      if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then
         lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
       fi
     done
   done
 done
+IFS=$as_save_IFS
 lt_ac_max=0
 lt_ac_count=0
 # Add /usr/xpg4/bin/sed as it is typically found on Solaris
 # along with /bin/sed that truncates output.
 for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-  test ! -f $lt_ac_sed && break
+  test ! -f $lt_ac_sed && continue
   cat /dev/null > conftest.in
   lt_ac_count=0
   echo $ECHO_N "0123456789$ECHO_C" >conftest.in
@@ -5861,7 +6578,8 @@ for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
     fi
   done
 done
-SED=$lt_cv_path_SED
 ])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
 AC_MSG_RESULT([$SED])
 ])
diff --git a/src/lt/config.guess b/src/lt/config.guess
index 78f6b92cd3..951383e355 100755
--- a/src/lt/config.guess
+++ b/src/lt/config.guess
@@ -1,9 +1,10 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
+#   Inc.
 
-timestamp='2003-01-10'
+timestamp='2007-05-17'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -17,13 +18,15 @@ timestamp='2003-01-10'
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
+
 # Originally written by Per Bothner <per@bothner.com>.
 # Please send patches to <config-patches@gnu.org>.  Submit a context
 # diff and a properly formatted ChangeLog entry.
@@ -53,7 +56,7 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
@@ -66,11 +69,11 @@ Try \`$me --help' for more information."
 while test $# -gt 0 ; do
   case $1 in
     --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit 0 ;;
+       echo "$timestamp" ; exit ;;
     --version | -v )
-       echo "$version" ; exit 0 ;;
+       echo "$version" ; exit ;;
     --help | --h* | -h )
-       echo "$usage"; exit 0 ;;
+       echo "$usage"; exit ;;
     -- )     # Stop option processing
        shift; break ;;
     - )	# Use stdin as input.
@@ -104,8 +107,9 @@ set_cc_for_build='
 trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
 trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
 : ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
  { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
  { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
 dummy=$tmp/dummy ;
 tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
@@ -122,7 +126,7 @@ case $CC_FOR_BUILD,$HOST_CC,$CC in
 	;;
  ,,*)   CC_FOR_BUILD=$CC ;;
  ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-esac ;'
+esac ; set_cc_for_build= ;'
 
 # This is needed to find uname on a Pyramid OSx when run in the BSD universe.
 # (ghazi@noc.rutgers.edu 1994-08-24)
@@ -157,6 +161,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	    arm*) machine=arm-unknown ;;
 	    sh3el) machine=shl-unknown ;;
 	    sh3eb) machine=sh-unknown ;;
+	    sh5el) machine=sh5le-unknown ;;
 	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
 	esac
 	# The Operating System including object format, if it has switched
@@ -195,141 +200,112 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	# contains redundant information, the shorter form:
 	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
 	echo "${machine}-${os}${release}"
-	exit 0 ;;
-    amiga:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    arc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    hp300:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mac68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    macppc:OpenBSD:*:*)
-	echo powerpc-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme88k:OpenBSD:*:*)
-	echo m88k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvmeppc:OpenBSD:*:*)
-	echo powerpc-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    pmax:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sgi:OpenBSD:*:*)
-	echo mipseb-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sun3:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    wgrisc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:OpenBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    *:MicroBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-microbsd${UNAME_RELEASE}
-	exit 0 ;;
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+	exit ;;
+    *:ekkoBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+	exit ;;
+    *:SolidBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+	exit ;;
+    macppc:MirBSD:*:*)
+	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    *:MirBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
     alpha:OSF1:*:*)
-	if test $UNAME_RELEASE = "V4.0"; then
+	case $UNAME_RELEASE in
+	*4.0)
 		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
-	fi
+		;;
+	*5.*)
+	        UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		;;
+	esac
+	# According to Compaq, /usr/sbin/psrinfo has been available on
+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
+	# covers most systems running today.  This code pipes the CPU
+	# types through head -n 1, so we only detect the type of CPU 0.
+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+	case "$ALPHA_CPU_TYPE" in
+	    "EV4 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV4.5 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "LCA4 (21066/21068)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV5 (21164)")
+		UNAME_MACHINE="alphaev5" ;;
+	    "EV5.6 (21164A)")
+		UNAME_MACHINE="alphaev56" ;;
+	    "EV5.6 (21164PC)")
+		UNAME_MACHINE="alphapca56" ;;
+	    "EV5.7 (21164PC)")
+		UNAME_MACHINE="alphapca57" ;;
+	    "EV6 (21264)")
+		UNAME_MACHINE="alphaev6" ;;
+	    "EV6.7 (21264A)")
+		UNAME_MACHINE="alphaev67" ;;
+	    "EV6.8CB (21264C)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8AL (21264B)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8CX (21264D)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.9A (21264/EV69A)")
+		UNAME_MACHINE="alphaev69" ;;
+	    "EV7 (21364)")
+		UNAME_MACHINE="alphaev7" ;;
+	    "EV7.9 (21364A)")
+		UNAME_MACHINE="alphaev79" ;;
+	esac
+	# A Pn.n version is a patched version.
 	# A Vn.n version is a released version.
 	# A Tn.n version is a released field test version.
 	# A Xn.n version is an unreleased experimental baselevel.
 	# 1.2 uses "1.2" for uname -r.
-	eval $set_cc_for_build
-	cat <<EOF >$dummy.s
-	.data
-\$Lformat:
-	.byte 37,100,45,37,120,10,0	# "%d-%x\n"
-
-	.text
-	.globl main
-	.align 4
-	.ent main
-main:
-	.frame \$30,16,\$26,0
-	ldgp \$29,0(\$27)
-	.prologue 1
-	.long 0x47e03d80 # implver \$0
-	lda \$2,-1
-	.long 0x47e20c21 # amask \$2,\$1
-	lda \$16,\$Lformat
-	mov \$0,\$17
-	not \$1,\$18
-	jsr \$26,printf
-	ldgp \$29,0(\$26)
-	mov 0,\$16
-	jsr \$26,exit
-	.end main
-EOF
-	$CC_FOR_BUILD -o $dummy $dummy.s 2>/dev/null
-	if test "$?" = 0 ; then
-		case `$dummy` in
-			0-0)
-				UNAME_MACHINE="alpha"
-				;;
-			1-0)
-				UNAME_MACHINE="alphaev5"
-				;;
-			1-1)
-				UNAME_MACHINE="alphaev56"
-				;;
-			1-101)
-				UNAME_MACHINE="alphapca56"
-				;;
-			2-303)
-				UNAME_MACHINE="alphaev6"
-				;;
-			2-307)
-				UNAME_MACHINE="alphaev67"
-				;;
-			2-1307)
-				UNAME_MACHINE="alphaev68"
-				;;
-			3-1307)
-				UNAME_MACHINE="alphaev7"
-				;;
-		esac
-	fi
-	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	exit 0 ;;
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	exit ;;
     Alpha\ *:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# Should we change UNAME_MACHINE based on the output of uname instead
 	# of the specific Alpha model?
 	echo alpha-pc-interix
-	exit 0 ;;
+	exit ;;
     21064:Windows_NT:50:3)
 	echo alpha-dec-winnt3.5
-	exit 0 ;;
+	exit ;;
     Amiga*:UNIX_System_V:4.0:*)
 	echo m68k-unknown-sysv4
-	exit 0;;
+	exit ;;
     *:[Aa]miga[Oo][Ss]:*:*)
 	echo ${UNAME_MACHINE}-unknown-amigaos
-	exit 0 ;;
+	exit ;;
     *:[Mm]orph[Oo][Ss]:*:*)
 	echo ${UNAME_MACHINE}-unknown-morphos
-	exit 0 ;;
+	exit ;;
     *:OS/390:*:*)
 	echo i370-ibm-openedition
-	exit 0 ;;
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
+    *:OS400:*:*)
+        echo powerpc-ibm-os400
+	exit ;;
     arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
 	echo arm-acorn-riscix${UNAME_RELEASE}
-	exit 0;;
+	exit ;;
+    arm:riscos:*:*|arm:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
     SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
 	echo hppa1.1-hitachi-hiuxmpp
-	exit 0;;
+	exit ;;
     Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
 	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
 	if test "`(/bin/universe) 2>/dev/null`" = att ; then
@@ -337,29 +313,32 @@ EOF
 	else
 		echo pyramid-pyramid-bsd
 	fi
-	exit 0 ;;
+	exit ;;
     NILE*:*:*:dcosx)
 	echo pyramid-pyramid-svr4
-	exit 0 ;;
-    DRS?6000:UNIX_SV:4.2*:7*)
+	exit ;;
+    DRS?6000:unix:4.0:6*)
+	echo sparc-icl-nx6
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
 	case `/usr/bin/uname -p` in
-	    sparc) echo sparc-icl-nx7 && exit 0 ;;
+	    sparc) echo sparc-icl-nx7; exit ;;
 	esac ;;
     sun4H:SunOS:5.*:*)
 	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    i86pc:SunOS:5.*:*)
+	exit ;;
+    i86pc:SunOS:5.*:* | ix86xen:SunOS:5.*:*)
 	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     sun4*:SunOS:6*:*)
 	# According to config.sub, this is the proper way to canonicalize
 	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
 	# it's likely to be more like Solaris than SunOS4.
 	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     sun4*:SunOS:*:*)
 	case "`/usr/bin/arch -k`" in
 	    Series*|S4*)
@@ -368,10 +347,10 @@ EOF
 	esac
 	# Japanese Language versions have a version number like `4.1.3-JL'.
 	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
-	exit 0 ;;
+	exit ;;
     sun3*:SunOS:*:*)
 	echo m68k-sun-sunos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     sun*:*:4.2BSD:*)
 	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
 	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
@@ -383,10 +362,10 @@ EOF
 		echo sparc-sun-sunos${UNAME_RELEASE}
 		;;
 	esac
-	exit 0 ;;
+	exit ;;
     aushp:SunOS:*:*)
 	echo sparc-auspex-sunos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     # The situation for MiNT is a little confusing.  The machine name
     # can be virtually everything (everything which is not
     # "atarist" or "atariste" at least should have a processor
@@ -397,37 +376,40 @@ EOF
     # be no problem.
     atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
         echo m68k-atari-mint${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
 	echo m68k-atari-mint${UNAME_RELEASE}
-        exit 0 ;;
+        exit ;;
     *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
         echo m68k-atari-mint${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
         echo m68k-milan-mint${UNAME_RELEASE}
-        exit 0 ;;
+        exit ;;
     hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
         echo m68k-hades-mint${UNAME_RELEASE}
-        exit 0 ;;
+        exit ;;
     *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
         echo m68k-unknown-mint${UNAME_RELEASE}
-        exit 0 ;;
+        exit ;;
+    m68k:machten:*:*)
+	echo m68k-apple-machten${UNAME_RELEASE}
+	exit ;;
     powerpc:machten:*:*)
 	echo powerpc-apple-machten${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     RISC*:Mach:*:*)
 	echo mips-dec-mach_bsd4.3
-	exit 0 ;;
+	exit ;;
     RISC*:ULTRIX:*:*)
 	echo mips-dec-ultrix${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     VAX*:ULTRIX*:*:*)
 	echo vax-dec-ultrix${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     2020:CLIX:*:* | 2430:CLIX:*:*)
 	echo clipper-intergraph-clix${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     mips:*:*:UMIPS | mips:*:*:RISCos)
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
@@ -451,32 +433,33 @@ EOF
 	  exit (-1);
 	}
 EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c \
-	  && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
-	  && exit 0
+	$CC_FOR_BUILD -o $dummy $dummy.c &&
+	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`$dummy $dummyarg` &&
+	    { echo "$SYSTEM_NAME"; exit; }
 	echo mips-mips-riscos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     Motorola:PowerMAX_OS:*:*)
 	echo powerpc-motorola-powermax
-	exit 0 ;;
+	exit ;;
     Motorola:*:4.3:PL8-*)
 	echo powerpc-harris-powermax
-	exit 0 ;;
+	exit ;;
     Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
 	echo powerpc-harris-powermax
-	exit 0 ;;
+	exit ;;
     Night_Hawk:Power_UNIX:*:*)
 	echo powerpc-harris-powerunix
-	exit 0 ;;
+	exit ;;
     m88k:CX/UX:7*:*)
 	echo m88k-harris-cxux7
-	exit 0 ;;
+	exit ;;
     m88k:*:4*:R4*)
 	echo m88k-motorola-sysv4
-	exit 0 ;;
+	exit ;;
     m88k:*:3*:R3*)
 	echo m88k-motorola-sysv3
-	exit 0 ;;
+	exit ;;
     AViiON:dgux:*:*)
         # DG/UX returns AViiON for all architectures
         UNAME_PROCESSOR=`/usr/bin/uname -p`
@@ -492,29 +475,29 @@ EOF
 	else
 	    echo i586-dg-dgux${UNAME_RELEASE}
 	fi
- 	exit 0 ;;
+ 	exit ;;
     M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
 	echo m88k-dolphin-sysv3
-	exit 0 ;;
+	exit ;;
     M88*:*:R3*:*)
 	# Delta 88k system running SVR3
 	echo m88k-motorola-sysv3
-	exit 0 ;;
+	exit ;;
     XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
 	echo m88k-tektronix-sysv3
-	exit 0 ;;
+	exit ;;
     Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
 	echo m68k-tektronix-bsd
-	exit 0 ;;
+	exit ;;
     *:IRIX*:*:*)
 	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
-	exit 0 ;;
+	exit ;;
     ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
-	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
     i*86:AIX:*:*)
 	echo i386-ibm-aix
-	exit 0 ;;
+	exit ;;
     ia64:AIX:*:*)
 	if [ -x /usr/bin/oslevel ] ; then
 		IBM_REV=`/usr/bin/oslevel`
@@ -522,7 +505,7 @@ EOF
 		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
 	fi
 	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
-	exit 0 ;;
+	exit ;;
     *:AIX:2:3)
 	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
 		eval $set_cc_for_build
@@ -537,14 +520,18 @@ EOF
 			exit(0);
 			}
 EOF
-		$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
-		echo rs6000-ibm-aix3.2.5
+		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
 	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
 		echo rs6000-ibm-aix3.2.4
 	else
 		echo rs6000-ibm-aix3.2
 	fi
-	exit 0 ;;
+	exit ;;
     *:AIX:*:[45])
 	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
 	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
@@ -558,28 +545,28 @@ EOF
 		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
 	fi
 	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
-	exit 0 ;;
+	exit ;;
     *:AIX:*:*)
 	echo rs6000-ibm-aix
-	exit 0 ;;
+	exit ;;
     ibmrt:4.4BSD:*|romp-ibm:BSD:*)
 	echo romp-ibm-bsd4.4
-	exit 0 ;;
+	exit ;;
     ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
 	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
-	exit 0 ;;                           # report: romp-ibm BSD 4.3
+	exit ;;                             # report: romp-ibm BSD 4.3
     *:BOSX:*:*)
 	echo rs6000-bull-bosx
-	exit 0 ;;
+	exit ;;
     DPX/2?00:B.O.S.:*:*)
 	echo m68k-bull-sysv3
-	exit 0 ;;
+	exit ;;
     9000/[34]??:4.3bsd:1.*:*)
 	echo m68k-hp-bsd
-	exit 0 ;;
+	exit ;;
     hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
 	echo m68k-hp-bsd4.4
-	exit 0 ;;
+	exit ;;
     9000/[34678]??:HP-UX:*:*)
 	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
 	case "${UNAME_MACHINE}" in
@@ -641,9 +628,19 @@ EOF
 	esac
 	if [ ${HP_ARCH} = "hppa2.0w" ]
 	then
-	    # avoid double evaluation of $set_cc_for_build
-	    test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
-	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
+	    eval $set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep __LP64__ >/dev/null
 	    then
 		HP_ARCH="hppa2.0w"
 	    else
@@ -651,11 +648,11 @@ EOF
 	    fi
 	fi
 	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
-	exit 0 ;;
+	exit ;;
     ia64:HP-UX:*:*)
 	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
 	echo ia64-hp-hpux${HPUX_REV}
-	exit 0 ;;
+	exit ;;
     3050*:HI-UX:*:*)
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
@@ -683,147 +680,182 @@ EOF
 	  exit (0);
 	}
 EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
+	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+		{ echo "$SYSTEM_NAME"; exit; }
 	echo unknown-hitachi-hiuxwe2
-	exit 0 ;;
+	exit ;;
     9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
 	echo hppa1.1-hp-bsd
-	exit 0 ;;
+	exit ;;
     9000/8??:4.3bsd:*:*)
 	echo hppa1.0-hp-bsd
-	exit 0 ;;
+	exit ;;
     *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
 	echo hppa1.0-hp-mpeix
-	exit 0 ;;
+	exit ;;
     hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
 	echo hppa1.1-hp-osf
-	exit 0 ;;
+	exit ;;
     hp8??:OSF1:*:*)
 	echo hppa1.0-hp-osf
-	exit 0 ;;
+	exit ;;
     i*86:OSF1:*:*)
 	if [ -x /usr/sbin/sysversion ] ; then
 	    echo ${UNAME_MACHINE}-unknown-osf1mk
 	else
 	    echo ${UNAME_MACHINE}-unknown-osf1
 	fi
-	exit 0 ;;
+	exit ;;
     parisc*:Lites*:*:*)
 	echo hppa1.1-hp-lites
-	exit 0 ;;
+	exit ;;
     C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
 	echo c1-convex-bsd
-        exit 0 ;;
+        exit ;;
     C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
 	if getsysinfo -f scalar_acc
 	then echo c32-convex-bsd
 	else echo c2-convex-bsd
 	fi
-        exit 0 ;;
+        exit ;;
     C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
 	echo c34-convex-bsd
-        exit 0 ;;
+        exit ;;
     C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
 	echo c38-convex-bsd
-        exit 0 ;;
+        exit ;;
     C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
 	echo c4-convex-bsd
-        exit 0 ;;
+        exit ;;
     CRAY*Y-MP:*:*:*)
 	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     CRAY*[A-Z]90:*:*:*)
 	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
 	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
 	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
 	      -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     CRAY*TS:*:*:*)
 	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     CRAY*T3E:*:*:*)
 	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     CRAY*SV1:*:*:*)
 	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     *:UNICOS/mp:*:*)
-	echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' 
-	exit 0 ;;
+	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
     F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
 	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
         FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
         FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
         echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-        exit 0 ;;
+        exit ;;
+    5000:UNIX_System_V:4.*:*)
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
     i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
 	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     sparc*:BSD/OS:*:*)
 	echo sparc-unknown-bsdi${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:BSD/OS:*:*)
 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:FreeBSD:*:*)
-	# Determine whether the default compiler uses glibc.
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <features.h>
-	#if __GLIBC__ >= 2
-	LIBC=gnu
-	#else
-	LIBC=
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
-	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
-	exit 0 ;;
+	case ${UNAME_MACHINE} in
+	    pc98)
+		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    amd64)
+		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    *)
+		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	esac
+	exit ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
-	exit 0 ;;
-    i*:MINGW*:*)
+	exit ;;
+    *:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
-	exit 0 ;;
+	exit ;;
+    i*:windows32*:*)
+    	# uname -m includes "-pc" on this system.
+    	echo ${UNAME_MACHINE}-mingw32
+	exit ;;
     i*:PW*:*)
 	echo ${UNAME_MACHINE}-pc-pw32
-	exit 0 ;;
-    x86:Interix*:3*)
-	echo i586-pc-interix3
-	exit 0 ;;
+	exit ;;
+    *:Interix*:[3456]*)
+    	case ${UNAME_MACHINE} in
+	    x86) 
+		echo i586-pc-interix${UNAME_RELEASE}
+		exit ;;
+	    EM64T | authenticamd)
+		echo x86_64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	esac ;;
     [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
 	echo i${UNAME_MACHINE}-pc-mks
-	exit 0 ;;
+	exit ;;
     i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
 	# UNAME_MACHINE based on the output of uname instead of i386?
 	echo i586-pc-interix
-	exit 0 ;;
+	exit ;;
     i*:UWIN*:*)
 	echo ${UNAME_MACHINE}-pc-uwin
-	exit 0 ;;
+	exit ;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit ;;
     p*:CYGWIN*:*)
 	echo powerpcle-unknown-cygwin
-	exit 0 ;;
+	exit ;;
     prep*:SunOS:5.*:*)
 	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     *:GNU:*:*)
+	# the GNU system
 	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
-	exit 0 ;;
+	exit ;;
+    *:GNU/*:*:*)
+	# other systems with GNU libc and userland
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+	exit ;;
     i*86:Minix:*:*)
 	echo ${UNAME_MACHINE}-pc-minix
-	exit 0 ;;
+	exit ;;
     arm*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
+    avr32*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    cris:Linux:*:*)
+	echo cris-axis-linux-gnu
+	exit ;;
+    crisv32:Linux:*:*)
+	echo crisv32-axis-linux-gnu
+	exit ;;
+    frv:Linux:*:*)
+    	echo frv-unknown-linux-gnu
+	exit ;;
     ia64:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
+    m32r*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
     m68*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     mips:Linux:*:*)
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
@@ -840,8 +872,12 @@ EOF
 	#endif
 	#endif
 EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	    /^CPU/{
+		s: ::g
+		p
+	    }'`"
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
     mips64:Linux:*:*)
 	eval $set_cc_for_build
@@ -859,15 +895,22 @@ EOF
 	#endif
 	#endif
 EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	    /^CPU/{
+		s: ::g
+		p
+	    }'`"
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
+    or32:Linux:*:*)
+	echo or32-unknown-linux-gnu
+	exit ;;
     ppc:Linux:*:*)
 	echo powerpc-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     ppc64:Linux:*:*)
 	echo powerpc64-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     alpha:Linux:*:*)
 	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
 	  EV5)   UNAME_MACHINE=alphaev5 ;;
@@ -881,7 +924,7 @@ EOF
 	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
 	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
 	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
-	exit 0 ;;
+	exit ;;
     parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
@@ -889,22 +932,31 @@ EOF
 	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
 	  *)    echo hppa-unknown-linux-gnu ;;
 	esac
-	exit 0 ;;
+	exit ;;
     parisc64:Linux:*:* | hppa64:Linux:*:*)
 	echo hppa64-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     s390:Linux:*:* | s390x:Linux:*:*)
 	echo ${UNAME_MACHINE}-ibm-linux
-	exit 0 ;;
+	exit ;;
+    sh64*:Linux:*:*)
+    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
     sh*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     sparc:Linux:*:* | sparc64:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
+    vax:Linux:*:*)
+	echo ${UNAME_MACHINE}-dec-linux-gnu
+	exit ;;
     x86_64:Linux:*:*)
 	echo x86_64-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
+    xtensa:Linux:*:*)
+    	echo xtensa-unknown-linux-gnu
+	exit ;;
     i*86:Linux:*:*)
 	# The BFD linker knows what the default object file format is, so
 	# first see if it will tell us. cd to the root directory to prevent
@@ -922,15 +974,15 @@ EOF
 		;;
 	  a.out-i386-linux)
 		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-		exit 0 ;;
+		exit ;;
 	  coff-i386)
 		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
-		exit 0 ;;
+		exit ;;
 	  "")
 		# Either a pre-BFD a.out linker (linux-gnuoldld) or
 		# one that does not give us useful --help.
 		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
-		exit 0 ;;
+		exit ;;
 	esac
 	# Determine whether the default compiler is a.out or elf
 	eval $set_cc_for_build
@@ -947,23 +999,33 @@ EOF
 	LIBC=gnulibc1
 	# endif
 	#else
-	#ifdef __INTEL_COMPILER
+	#if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
 	LIBC=gnu
 	#else
 	LIBC=gnuaout
 	#endif
 	#endif
+	#ifdef __dietlibc__
+	LIBC=dietlibc
+	#endif
 EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
-	test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
-	test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	    /^LIBC/{
+		s: ::g
+		p
+	    }'`"
+	test x"${LIBC}" != x && {
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+		exit
+	}
+	test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
 	;;
     i*86:DYNIX/ptx:4*:*)
 	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
 	# earlier versions are messed up and put the nodename in both
 	# sysname and nodename.
 	echo i386-sequent-sysv4
-	exit 0 ;;
+	exit ;;
     i*86:UNIX_SV:4.2MP:2.*)
         # Unixware is an offshoot of SVR4, but it has its own version
         # number series starting with 2...
@@ -971,24 +1033,27 @@ EOF
 	# I just have to hope.  -- rms.
         # Use sysv4.2uw... so that sysv4* matches it.
 	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
-	exit 0 ;;
+	exit ;;
     i*86:OS/2:*:*)
 	# If we were able to find `uname', then EMX Unix compatibility
 	# is probably installed.
 	echo ${UNAME_MACHINE}-pc-os2-emx
-	exit 0 ;;
+	exit ;;
     i*86:XTS-300:*:STOP)
 	echo ${UNAME_MACHINE}-unknown-stop
-	exit 0 ;;
+	exit ;;
     i*86:atheos:*:*)
 	echo ${UNAME_MACHINE}-unknown-atheos
-	exit 0 ;;
+	exit ;;
+    i*86:syllable:*:*)
+	echo ${UNAME_MACHINE}-pc-syllable
+	exit ;;
     i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
 	echo i386-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     i*86:*DOS:*:*)
 	echo ${UNAME_MACHINE}-pc-msdosdjgpp
-	exit 0 ;;
+	exit ;;
     i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
 	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
 	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
@@ -996,15 +1061,16 @@ EOF
 	else
 		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
 	fi
-	exit 0 ;;
-    i*86:*:5:[78]*)
+	exit ;;
+    i*86:*:5:[678]*)
+    	# UnixWare 7.x, OpenUNIX and OpenServer 6.
 	case `/bin/uname -X | grep "^Machine"` in
 	    *486*)	     UNAME_MACHINE=i486 ;;
 	    *Pentium)	     UNAME_MACHINE=i586 ;;
 	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
 	esac
 	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
-	exit 0 ;;
+	exit ;;
     i*86:*:3.2:*)
 	if test -f /usr/options/cb.name; then
 		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
@@ -1022,73 +1088,73 @@ EOF
 	else
 		echo ${UNAME_MACHINE}-pc-sysv32
 	fi
-	exit 0 ;;
+	exit ;;
     pc:*:*:*)
 	# Left here for compatibility:
         # uname -m prints for DJGPP always 'pc', but it prints nothing about
         # the processor, so we play safe by assuming i386.
 	echo i386-pc-msdosdjgpp
-        exit 0 ;;
+        exit ;;
     Intel:Mach:3*:*)
 	echo i386-pc-mach3
-	exit 0 ;;
+	exit ;;
     paragon:*:*:*)
 	echo i860-intel-osf1
-	exit 0 ;;
+	exit ;;
     i860:*:4.*:*) # i860-SVR4
 	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
 	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
 	else # Add other i860-SVR4 vendors below as they are discovered.
 	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
 	fi
-	exit 0 ;;
+	exit ;;
     mini*:CTIX:SYS*5:*)
 	# "miniframe"
 	echo m68010-convergent-sysv
-	exit 0 ;;
+	exit ;;
     mc68k:UNIX:SYSTEM5:3.51m)
 	echo m68k-convergent-sysv
-	exit 0 ;;
+	exit ;;
     M680?0:D-NIX:5.3:*)
 	echo m68k-diab-dnix
-	exit 0 ;;
-    M68*:*:R3V[567]*:*)
-	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
-    3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0)
+	exit ;;
+    M68*:*:R3V[5678]*:*)
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
 	OS_REL=''
 	test -r /etc/.relid \
 	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
 	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
 	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
     3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
         /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-          && echo i486-ncr-sysv4 && exit 0 ;;
+          && { echo i486-ncr-sysv4; exit; } ;;
     m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
 	echo m68k-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     mc68030:UNIX_System_V:4.*:*)
 	echo m68k-atari-sysv4
-	exit 0 ;;
+	exit ;;
     TSUNAMI:LynxOS:2.*:*)
 	echo sparc-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     rs6000:LynxOS:2.*:*)
 	echo rs6000-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
 	echo powerpc-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     SM[BE]S:UNIX_SV:*:*)
 	echo mips-dde-sysv${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     RM*:ReliantUNIX-*:*:*)
 	echo mips-sni-sysv4
-	exit 0 ;;
+	exit ;;
     RM*:SINIX-*:*:*)
 	echo mips-sni-sysv4
-	exit 0 ;;
+	exit ;;
     *:SINIX-*:*:*)
 	if uname -p 2>/dev/null >/dev/null ; then
 		UNAME_MACHINE=`(uname -p) 2>/dev/null`
@@ -1096,68 +1162,81 @@ EOF
 	else
 		echo ns32k-sni-sysv
 	fi
-	exit 0 ;;
+	exit ;;
     PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
                       # says <Richard.M.Bartel@ccMail.Census.GOV>
         echo i586-unisys-sysv4
-        exit 0 ;;
+        exit ;;
     *:UNIX_System_V:4*:FTX*)
 	# From Gerald Hewes <hewes@openmarket.com>.
 	# How about differentiating between stratus architectures? -djm
 	echo hppa1.1-stratus-sysv4
-	exit 0 ;;
+	exit ;;
     *:*:*:FTX*)
 	# From seanf@swdc.stratus.com.
 	echo i860-stratus-sysv4
-	exit 0 ;;
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo ${UNAME_MACHINE}-stratus-vos
+	exit ;;
     *:VOS:*:*)
 	# From Paul.Green@stratus.com.
 	echo hppa1.1-stratus-vos
-	exit 0 ;;
+	exit ;;
     mc68*:A/UX:*:*)
 	echo m68k-apple-aux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     news*:NEWS-OS:6*:*)
 	echo mips-sony-newsos6
-	exit 0 ;;
+	exit ;;
     R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
 	if [ -d /usr/nec ]; then
 	        echo mips-nec-sysv${UNAME_RELEASE}
 	else
 	        echo mips-unknown-sysv${UNAME_RELEASE}
 	fi
-        exit 0 ;;
+        exit ;;
     BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
 	echo powerpc-be-beos
-	exit 0 ;;
+	exit ;;
     BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
 	echo powerpc-apple-beos
-	exit 0 ;;
+	exit ;;
     BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
 	echo i586-pc-beos
-	exit 0 ;;
+	exit ;;
     SX-4:SUPER-UX:*:*)
 	echo sx4-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     SX-5:SUPER-UX:*:*)
 	echo sx5-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     SX-6:SUPER-UX:*:*)
 	echo sx6-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
+    SX-7:SUPER-UX:*:*)
+	echo sx7-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8:SUPER-UX:*:*)
+	echo sx8-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8R:SUPER-UX:*:*)
+	echo sx8r-nec-superux${UNAME_RELEASE}
+	exit ;;
     Power*:Rhapsody:*:*)
 	echo powerpc-apple-rhapsody${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:Rhapsody:*:*)
 	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:Darwin:*:*)
-	case `uname -p` in
-	    *86) UNAME_PROCESSOR=i686 ;;
-	    powerpc) UNAME_PROCESSOR=powerpc ;;
+	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+	case $UNAME_PROCESSOR in
+	    unknown) UNAME_PROCESSOR=powerpc ;;
 	esac
 	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:procnto*:*:* | *:QNX:[0123456789]*:*)
 	UNAME_PROCESSOR=`uname -p`
 	if test "$UNAME_PROCESSOR" = "x86"; then
@@ -1165,22 +1244,25 @@ EOF
 		UNAME_MACHINE=pc
 	fi
 	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:QNX:*:4*)
 	echo i386-pc-qnx
-	exit 0 ;;
-    NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*)
+	exit ;;
+    NSE-?:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSR-?:NONSTOP_KERNEL:*:*)
 	echo nsr-tandem-nsk${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:NonStop-UX:*:*)
 	echo mips-compaq-nonstopux
-	exit 0 ;;
+	exit ;;
     BS2000:POSIX*:*:*)
 	echo bs2000-siemens-sysv
-	exit 0 ;;
+	exit ;;
     DS/*:UNIX_System_V:*:*)
 	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:Plan9:*:*)
 	# "uname -m" is not consistent, so use $cputype instead. 386
 	# is converted to i386 for consistency with other x86
@@ -1191,25 +1273,47 @@ EOF
 	    UNAME_MACHINE="$cputype"
 	fi
 	echo ${UNAME_MACHINE}-unknown-plan9
-	exit 0 ;;
+	exit ;;
     *:TOPS-10:*:*)
 	echo pdp10-unknown-tops10
-	exit 0 ;;
+	exit ;;
     *:TENEX:*:*)
 	echo pdp10-unknown-tenex
-	exit 0 ;;
+	exit ;;
     KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
 	echo pdp10-dec-tops20
-	exit 0 ;;
+	exit ;;
     XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
 	echo pdp10-xkl-tops20
-	exit 0 ;;
+	exit ;;
     *:TOPS-20:*:*)
 	echo pdp10-unknown-tops20
-	exit 0 ;;
+	exit ;;
     *:ITS:*:*)
 	echo pdp10-unknown-its
-	exit 0 ;;
+	exit ;;
+    SEI:*:*:SEIUX)
+        echo mips-sei-seiux${UNAME_RELEASE}
+	exit ;;
+    *:DragonFly:*:*)
+	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
+    *:*VMS:*:*)
+    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	case "${UNAME_MACHINE}" in
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+	exit ;;
+    i*86:rdos:*:*)
+	echo ${UNAME_MACHINE}-pc-rdos
+	exit ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2
@@ -1241,7 +1345,7 @@ main ()
 #endif
 
 #if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix"); exit (0);
+  printf ("arm-acorn-riscix\n"); exit (0);
 #endif
 
 #if defined (hp300) && !defined (hpux)
@@ -1330,11 +1434,12 @@ main ()
 }
 EOF
 
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+	{ echo "$SYSTEM_NAME"; exit; }
 
 # Apollos put the system type in the environment.
 
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
 
 # Convex versions that predate uname can use getsysinfo(1)
 
@@ -1343,22 +1448,22 @@ then
     case `getsysinfo -f cpu_type` in
     c1*)
 	echo c1-convex-bsd
-	exit 0 ;;
+	exit ;;
     c2*)
 	if getsysinfo -f scalar_acc
 	then echo c32-convex-bsd
 	else echo c2-convex-bsd
 	fi
-	exit 0 ;;
+	exit ;;
     c34*)
 	echo c34-convex-bsd
-	exit 0 ;;
+	exit ;;
     c38*)
 	echo c38-convex-bsd
-	exit 0 ;;
+	exit ;;
     c4*)
 	echo c4-convex-bsd
-	exit 0 ;;
+	exit ;;
     esac
 fi
 
@@ -1369,7 +1474,9 @@ This script, last modified $timestamp, has failed to recognize
 the operating system you are using. It is advised that you
 download the most up to date version of the config scripts from
 
-    ftp://ftp.gnu.org/pub/gnu/config/
+  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
+and
+  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
 
 If the version you run ($0) is already up to date, please
 send the following data and any information you think might be
diff --git a/src/lt/config.sub b/src/lt/config.sub
index d6d67c3fd9..c060f44833 100755
--- a/src/lt/config.sub
+++ b/src/lt/config.sub
@@ -1,9 +1,10 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
+#   Inc.
 
-timestamp='2003-01-03'
+timestamp='2007-04-29'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -21,14 +22,15 @@ timestamp='2003-01-03'
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
+
 # Please send patches to <config-patches@gnu.org>.  Submit a context
 # diff and a properly formatted ChangeLog entry.
 #
@@ -70,7 +72,7 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
@@ -83,11 +85,11 @@ Try \`$me --help' for more information."
 while test $# -gt 0 ; do
   case $1 in
     --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit 0 ;;
+       echo "$timestamp" ; exit ;;
     --version | -v )
-       echo "$version" ; exit 0 ;;
+       echo "$version" ; exit ;;
     --help | --h* | -h )
-       echo "$usage"; exit 0 ;;
+       echo "$usage"; exit ;;
     -- )     # Stop option processing
        shift; break ;;
     - )	# Use stdin as input.
@@ -99,7 +101,7 @@ while test $# -gt 0 ; do
     *local*)
        # First pass through any local machine types.
        echo $1
-       exit 0;;
+       exit ;;
 
     * )
        break ;;
@@ -118,7 +120,9 @@ esac
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
+  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
+  storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
@@ -144,7 +148,7 @@ case $os in
 	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
 	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
 	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis)
+	-apple | -axis | -knuth | -cray)
 		os=
 		basic_machine=$1
 		;;
@@ -169,6 +173,10 @@ case $os in
 	-hiux*)
 		os=-hiuxwe2
 		;;
+	-sco6)
+		os=-sco5v6
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-sco5)
 		os=-sco3.2v5
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -185,6 +193,10 @@ case $os in
 		# Don't forget version if it is 3.2v4 or newer.
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
+	-sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-sco*)
 		os=-sco3.2v2
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -228,14 +240,17 @@ case $basic_machine in
 	| a29k \
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
-	| clipper \
+	| am33_2.0 \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+	| bfin \
+	| c4x | clipper \
 	| d10v | d30v | dlx | dsp16xx \
-	| fr30 | frv \
+	| fido | fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
-	| ip2k \
-	| m32r | m68000 | m68k | m88k | mcore \
+	| ip2k | iq2000 \
+	| m32c | m32r | m32rle | m68000 | m68k | m88k \
+	| maxq | mb | microblaze | mcore | mep \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@@ -244,28 +259,33 @@ case $basic_machine in
 	| mips64vr4100 | mips64vr4100el \
 	| mips64vr4300 | mips64vr4300el \
 	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
 	| mipsisa32 | mipsisa32el \
 	| mipsisa32r2 | mipsisa32r2el \
 	| mipsisa64 | mipsisa64el \
+	| mipsisa64r2 | mipsisa64r2el \
 	| mipsisa64sb1 | mipsisa64sb1el \
 	| mipsisa64sr71k | mipsisa64sr71kel \
 	| mipstx39 | mipstx39el \
 	| mn10200 | mn10300 \
+	| mt \
 	| msp430 \
+	| nios | nios2 \
 	| ns16k | ns32k \
-	| openrisc | or32 \
+	| or32 \
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
 	| pyramid \
-	| s390 | s390x \
-	| sh | sh[1234] | sh3e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+	| score \
+	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
-	| sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
-	| strongarm \
-	| tahoe | thumb | tic80 | tron \
+	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+	| spu | strongarm \
+	| tahoe | thumb | tic4x | tic80 | tron \
 	| v850 | v850e \
 	| we32k \
-	| x86 | xscale | xstormy16 | xtensa \
+	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
 	| z8k)
 		basic_machine=$basic_machine-unknown
 		;;
@@ -276,6 +296,9 @@ case $basic_machine in
 		;;
 	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
 		;;
+	ms1)
+		basic_machine=mt-unknown
+		;;
 
 	# We use `pc' rather than `unknown'
 	# because (1) that's what they normally are, and
@@ -295,20 +318,20 @@ case $basic_machine in
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
 	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-	| avr-* \
-	| bs2000-* \
-	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* \
-	| clipper-* | cydra-* \
+	| avr-* | avr32-* \
+	| bfin-* | bs2000-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+	| clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
 	| elxsi-* \
-	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
+	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
 	| h8300-* | h8500-* \
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
-	| ip2k-* \
-	| m32r-* \
+	| ip2k-* | iq2000-* \
+	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | mcore-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
@@ -317,29 +340,36 @@ case $basic_machine in
 	| mips64vr4100-* | mips64vr4100el-* \
 	| mips64vr4300-* | mips64vr4300el-* \
 	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
 	| mipsisa32-* | mipsisa32el-* \
 	| mipsisa32r2-* | mipsisa32r2el-* \
 	| mipsisa64-* | mipsisa64el-* \
+	| mipsisa64r2-* | mipsisa64r2el-* \
 	| mipsisa64sb1-* | mipsisa64sb1el-* \
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
 	| mipstx39-* | mipstx39el-* \
+	| mmix-* \
+	| mt-* \
 	| msp430-* \
-	| none-* | np1-* | nv1-* | ns16k-* | ns32k-* \
+	| nios-* | nios2-* \
+	| none-* | np1-* | ns16k-* | ns32k-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
 	| pyramid-* \
 	| romp-* | rs6000-* \
-	| s390-* | s390x-* \
-	| sh-* | sh[1234]-* | sh3e-* | sh[34]eb-* | shbe-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
-	| sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
-	| tahoe-* | thumb-* | tic30-* | tic4x-* | tic54x-* | tic80-* | tron-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+	| sparclite-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
+	| tahoe-* | thumb-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tron-* \
 	| v850-* | v850e-* | vax-* \
 	| we32k-* \
-	| x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
-	| xtensa-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| xstormy16-* | xtensa-* \
 	| ymp-* \
 	| z8k-*)
 		;;
@@ -359,6 +389,9 @@ case $basic_machine in
 		basic_machine=a29k-amd
 		os=-udi
 		;;
+    	abacus)
+		basic_machine=abacus-unknown
+		;;
 	adobe68k)
 		basic_machine=m68010-adobe
 		os=-scout
@@ -373,6 +406,12 @@ case $basic_machine in
 		basic_machine=a29k-none
 		os=-bsd
 		;;
+	amd64)
+		basic_machine=x86_64-pc
+		;;
+	amd64-*)
+		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	amdahl)
 		basic_machine=580-amdahl
 		os=-sysv
@@ -432,12 +471,27 @@ case $basic_machine in
 		basic_machine=j90-cray
 		os=-unicos
 		;;
+	craynv)
+		basic_machine=craynv-cray
+		os=-unicosmp
+		;;
+	cr16c)
+		basic_machine=cr16c-unknown
+		os=-elf
+		;;
 	crds | unos)
 		basic_machine=m68k-crds
 		;;
+	crisv32 | crisv32-* | etraxfs*)
+		basic_machine=crisv32-axis
+		;;
 	cris | cris-* | etrax*)
 		basic_machine=cris-axis
 		;;
+	crx)
+		basic_machine=crx-unknown
+		os=-elf
+		;;
 	da30 | da30-*)
 		basic_machine=m68k-da30
 		;;
@@ -460,6 +514,10 @@ case $basic_machine in
 		basic_machine=m88k-motorola
 		os=-sysv3
 		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
 	dpx20 | dpx20-*)
 		basic_machine=rs6000-bull
 		os=-bosx
@@ -625,6 +683,10 @@ case $basic_machine in
 		basic_machine=i386-pc
 		os=-mingw32
 		;;
+	mingw32ce)
+		basic_machine=arm-unknown
+		os=-mingw32ce
+		;;
 	miniframe)
 		basic_machine=m68000-convergent
 		;;
@@ -638,10 +700,6 @@ case $basic_machine in
 	mips3*)
 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
 		;;
-	mmix*)
-		basic_machine=mmix-knuth
-		os=-mmixware
-		;;
 	monitor)
 		basic_machine=m68k-rom68k
 		os=-coff
@@ -654,6 +712,9 @@ case $basic_machine in
 		basic_machine=i386-pc
 		os=-msdos
 		;;
+	ms1-*)
+		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+		;;
 	mvs)
 		basic_machine=i370-ibm
 		os=-mvs
@@ -722,10 +783,6 @@ case $basic_machine in
 	np1)
 		basic_machine=np1-gould
 		;;
-	nv1)
-		basic_machine=nv1-cray
-		os=-unicosmp
-		;;
 	nsr-tandem)
 		basic_machine=nsr-tandem
 		;;
@@ -733,9 +790,12 @@ case $basic_machine in
 		basic_machine=hppa1.1-oki
 		os=-proelf
 		;;
-	or32 | or32-*)
+	openrisc | openrisc-*)
 		basic_machine=or32-unknown
-		os=-coff
+		;;
+	os400)
+		basic_machine=powerpc-ibm
+		os=-os400
 		;;
 	OSE68000 | ose68000)
 		basic_machine=m68000-ericsson
@@ -762,24 +822,36 @@ case $basic_machine in
 	pc532 | pc532-*)
 		basic_machine=ns32k-pc532
 		;;
+	pc98)
+		basic_machine=i386-pc
+		;;
+	pc98-*)
+		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	pentium | p5 | k5 | k6 | nexgen | viac3)
 		basic_machine=i586-pc
 		;;
 	pentiumpro | p6 | 6x86 | athlon | athlon_*)
 		basic_machine=i686-pc
 		;;
-	pentiumii | pentium2)
+	pentiumii | pentium2 | pentiumiii | pentium3)
 		basic_machine=i686-pc
 		;;
+	pentium4)
+		basic_machine=i786-pc
+		;;
 	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
 		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
 	pentiumpro-* | p6-* | 6x86-* | athlon-*)
 		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
-	pentiumii-* | pentium2-*)
+	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
 		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
+	pentium4-*)
+		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	pn)
 		basic_machine=pn-gould
 		;;
@@ -812,6 +884,10 @@ case $basic_machine in
 		basic_machine=i586-unknown
 		os=-pw32
 		;;
+	rdos)
+		basic_machine=i386-pc
+		os=-rdos
+		;;
 	rom68k)
 		basic_machine=m68k-rom68k
 		os=-coff
@@ -822,6 +898,12 @@ case $basic_machine in
 	rtpc | rtpc-*)
 		basic_machine=romp-ibm
 		;;
+	s390 | s390-*)
+		basic_machine=s390-ibm
+		;;
+	s390x | s390x-*)
+		basic_machine=s390x-ibm
+		;;
 	sa29200)
 		basic_machine=a29k-amd
 		os=-udi
@@ -832,6 +914,14 @@ case $basic_machine in
 	sb1el)
 		basic_machine=mipsisa64sb1el-unknown
 		;;
+	sde)
+		basic_machine=mipsisa32-sde
+		os=-elf
+		;;
+	sei)
+		basic_machine=mips-sei
+		os=-seiux
+		;;
 	sequent)
 		basic_machine=i386-sequent
 		;;
@@ -839,6 +929,12 @@ case $basic_machine in
 		basic_machine=sh-hitachi
 		os=-hms
 		;;
+	sh5el)
+		basic_machine=sh5le-unknown
+		;;
+	sh64)
+		basic_machine=sh64-unknown
+		;;
 	sparclite-wrs | simso-wrs)
 		basic_machine=sparclite-wrs
 		os=-vxworks
@@ -913,14 +1009,18 @@ case $basic_machine in
 		basic_machine=t90-cray
 		os=-unicos
 		;;
-        tic4x | c4x*)
-		basic_machine=tic4x-unknown
-		os=-coff
-		;;
 	tic54x | c54x*)
 		basic_machine=tic54x-unknown
 		os=-coff
 		;;
+	tic55x | c55x*)
+		basic_machine=tic55x-unknown
+		os=-coff
+		;;
+	tic6x | c6x*)
+		basic_machine=tic6x-unknown
+		os=-coff
+		;;
 	tx39)
 		basic_machine=mipstx39-unknown
 		;;
@@ -934,6 +1034,10 @@ case $basic_machine in
 	tower | tower-32)
 		basic_machine=m68k-ncr
 		;;
+	tpf)
+		basic_machine=s390x-ibm
+		os=-tpf
+		;;
 	udi29k)
 		basic_machine=a29k-amd
 		os=-udi
@@ -977,6 +1081,10 @@ case $basic_machine in
 		basic_machine=hppa1.1-winbond
 		os=-proelf
 		;;
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
 	xps | xps100)
 		basic_machine=xps100-honeywell
 		;;
@@ -1007,6 +1115,9 @@ case $basic_machine in
 	romp)
 		basic_machine=romp-ibm
 		;;
+	mmix)
+		basic_machine=mmix-knuth
+		;;
 	rs6000)
 		basic_machine=rs6000-ibm
 		;;
@@ -1023,13 +1134,10 @@ case $basic_machine in
 	we32k)
 		basic_machine=we32k-att
 		;;
-	sh3 | sh4 | sh3eb | sh4eb | sh[1234]le | sh3ele)
+	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
 		basic_machine=sh-unknown
 		;;
-	sh64)
-		basic_machine=sh64-unknown
-		;;
-	sparc | sparcv9 | sparcv9b)
+	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
 		basic_machine=sparc-sun
 		;;
 	cydra)
@@ -1102,19 +1210,23 @@ case $os in
 	      | -aos* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
-	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+	      | -openbsd* | -solidbsd* \
+	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
 	      | -chorusos* | -chorusrdb* \
 	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
 	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
-	      | -powermax* | -dnix* | -microbsd*)
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1132,12 +1244,15 @@ case $os in
 		os=`echo $os | sed -e 's|nto|nto-qnx|'`
 		;;
 	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
-	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
 	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
 		;;
 	-mac*)
 		os=`echo $os | sed -e 's|mac|macos|'`
 		;;
+	-linux-dietlibc)
+		os=-linux-dietlibc
+		;;
 	-linux*)
 		os=`echo $os | sed -e 's|linux|linux-gnu|'`
 		;;
@@ -1150,6 +1265,9 @@ case $os in
 	-opened*)
 		os=-openedition
 		;;
+        -os400*)
+		os=-os400
+		;;
 	-wince*)
 		os=-wince
 		;;
@@ -1171,6 +1289,9 @@ case $os in
 	-atheos*)
 		os=-atheos
 		;;
+	-syllable*)
+		os=-syllable
+		;;
 	-386bsd)
 		os=-bsd
 		;;
@@ -1193,6 +1314,9 @@ case $os in
 	-sinix*)
 		os=-sysv4
 		;;
+        -tpf*)
+		os=-tpf
+		;;
 	-triton*)
 		os=-sysv3
 		;;
@@ -1223,6 +1347,15 @@ case $os in
 	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
 		os=-mint
 		;;
+	-aros*)
+		os=-aros
+		;;
+	-kaos*)
+		os=-kaos
+		;;
+	-zvmoe)
+		os=-zvmoe
+		;;
 	-none)
 		;;
 	*)
@@ -1245,6 +1378,12 @@ else
 # system, and we'll never get to this point.
 
 case $basic_machine in
+        score-*)
+		os=-elf
+		;;
+        spu-*)
+		os=-elf
+		;;
 	*-acorn)
 		os=-riscix1.2
 		;;
@@ -1254,6 +1393,9 @@ case $basic_machine in
 	arm*-semi)
 		os=-aout
 		;;
+        c4x-* | tic4x-*)
+        	os=-coff
+		;;
 	# This must come before the *-dec entry.
 	pdp10-*)
 		os=-tops20
@@ -1279,6 +1421,9 @@ case $basic_machine in
 	m68*-cisco)
 		os=-aout
 		;;
+        mep-*)
+		os=-elf
+		;;
 	mips*-cisco)
 		os=-elf
 		;;
@@ -1297,9 +1442,15 @@ case $basic_machine in
 	*-be)
 		os=-beos
 		;;
+	*-haiku)
+		os=-haiku
+		;;
 	*-ibm)
 		os=-aix
 		;;
+    	*-knuth)
+		os=-mmixware
+		;;
 	*-wec)
 		os=-proelf
 		;;
@@ -1432,9 +1583,15 @@ case $basic_machine in
 			-mvs* | -opened*)
 				vendor=ibm
 				;;
+			-os400*)
+				vendor=ibm
+				;;
 			-ptx*)
 				vendor=sequent
 				;;
+			-tpf*)
+				vendor=ibm
+				;;
 			-vxsim* | -vxworks* | -windiss*)
 				vendor=wrs
 				;;
@@ -1459,7 +1616,7 @@ case $basic_machine in
 esac
 
 echo $basic_machine$os
-exit 0
+exit
 
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)
diff --git a/src/lt/configure b/src/lt/configure
index e541b23213..4888ee11d2 100755
--- a/src/lt/configure
+++ b/src/lt/configure
@@ -1,11 +1,10 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.57 for lt 1.0.
+# Generated by GNU Autoconf 2.59 for lt 1.0.
 #
 # Report bugs to <mflatt@plt-scheme.org>.
 #
-# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
+# Copyright (C) 2003 Free Software Foundation, Inc.
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
 ## --------------------- ##
@@ -22,9 +21,10 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
 elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
   set -o posix
 fi
+DUALCASE=1; export DUALCASE # for MKS sh
 
 # Support unset when possible.
-if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
   as_unset=unset
 else
   as_unset=false
@@ -43,7 +43,7 @@ for as_var in \
   LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
   LC_TELEPHONE LC_TIME
 do
-  if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
+  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
     eval $as_var=C; export $as_var
   else
     $as_unset $as_var
@@ -220,16 +220,17 @@ rm -f conf$$ conf$$.exe conf$$.file
 if mkdir -p . 2>/dev/null; then
   as_mkdir_p=:
 else
+  test -d ./-p && rmdir ./-p
   as_mkdir_p=false
 fi
 
 as_executable_p="test -f"
 
 # Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
 
 # Sed expression to map a string onto a valid variable name.
-as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
 # IFS
@@ -279,15 +280,15 @@ fi
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 if test -z "$ECHO"; then
 if test "X${echo_test_string+set}" != Xset; then
 # find a string as large as possible, as long as the shell can cope with it
   for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
     # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-       echo_test_string="`eval $cmd`" &&
+    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
+       echo_test_string=`eval $cmd` &&
        (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
     then
       break
@@ -392,9 +393,9 @@ fi
 
 
 
-tagnames=`echo "$tagnames,CXX" | sed 's/^,//'`
+tagnames=${tagnames+${tagnames},}CXX
 
-tagnames=`echo "$tagnames,F77" | sed 's/^,//'`
+tagnames=${tagnames+${tagnames},}F77
 
 # Name of the host.
 # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
@@ -463,7 +464,7 @@ ac_includes_default="\
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB STRIP ac_ct_STRIP CPP CXX CXXFLAGS ac_ct_CXX CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT SED EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB STRIP ac_ct_STRIP CPP CXX CXXFLAGS ac_ct_CXX CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL'
 ac_subst_files=''
 
 # Initialize some variables set by options.
@@ -822,7 +823,7 @@ done
 
 # Be sure to have absolute paths.
 for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-              localstatedir libdir includedir oldincludedir infodir mandir
+	      localstatedir libdir includedir oldincludedir infodir mandir
 do
   eval ac_val=$`echo $ac_var`
   case $ac_val in
@@ -862,10 +863,10 @@ if test -z "$srcdir"; then
   # Try the directory containing this script, then its parent.
   ac_confdir=`(dirname "$0") 2>/dev/null ||
 $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$0" : 'X\(//\)[^/]' \| \
-         X"$0" : 'X\(//\)$' \| \
-         X"$0" : 'X\(/\)' \| \
-         .     : '\(.\)' 2>/dev/null ||
+	 X"$0" : 'X\(//\)[^/]' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
 echo X"$0" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
   	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
@@ -977,9 +978,9 @@ _ACEOF
   cat <<_ACEOF
 Installation directories:
   --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
+			  [$ac_default_prefix]
   --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [PREFIX]
+			  [PREFIX]
 
 By default, \`make install' will install all the files in
 \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
@@ -1088,12 +1089,45 @@ case $srcdir in
     ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
     ac_top_srcdir=$ac_top_builddir$srcdir ;;
 esac
-# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
-# absolute.
-ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
-ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
-ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+  case "$ac_dir" in
+  .) ac_abs_builddir=`pwd`;;
+  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+  *) ac_abs_builddir=`pwd`/"$ac_dir";;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+  case ${ac_top_builddir}. in
+  .) ac_abs_top_builddir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+  case $ac_srcdir in
+  .) ac_abs_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+  case $ac_top_srcdir in
+  .) ac_abs_top_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+  esac;;
+esac
 
     cd $ac_dir
     # Check for guested configure; otherwise get Cygnus style configure.
@@ -1104,7 +1138,7 @@ ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
       echo
       $SHELL $ac_srcdir/configure  --help=recursive
     elif test -f $ac_srcdir/configure.ac ||
-           test -f $ac_srcdir/configure.in; then
+	   test -f $ac_srcdir/configure.in; then
       echo
       $ac_configure --help
     else
@@ -1118,10 +1152,9 @@ test -n "$ac_init_help" && exit 0
 if $ac_init_version; then
   cat <<\_ACEOF
 lt configure 1.0
-generated by GNU Autoconf 2.57
+generated by GNU Autoconf 2.59
 
-Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
-Free Software Foundation, Inc.
+Copyright (C) 2003 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
@@ -1133,7 +1166,7 @@ This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
 It was created by lt $as_me 1.0, which was
-generated by GNU Autoconf 2.57.  Invocation command line was
+generated by GNU Autoconf 2.59.  Invocation command line was
 
   $ $0 $@
 
@@ -1210,19 +1243,19 @@ do
     2)
       ac_configure_args1="$ac_configure_args1 '$ac_arg'"
       if test $ac_must_keep_next = true; then
-        ac_must_keep_next=false # Got value, back to normal.
+	ac_must_keep_next=false # Got value, back to normal.
       else
-        case $ac_arg in
-          *=* | --config-cache | -C | -disable-* | --disable-* \
-          | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-          | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-          | -with-* | --with-* | -without-* | --without-* | --x)
-            case "$ac_configure_args0 " in
-              "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-            esac
-            ;;
-          -* ) ac_must_keep_next=true ;;
-        esac
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
       fi
       ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
       # Get rid of the leading space.
@@ -1256,12 +1289,12 @@ _ASBOX
     case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
     *ac_space=\ *)
       sed -n \
-        "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-    	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+	"s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
       ;;
     *)
       sed -n \
-        "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
       ;;
     esac;
 }
@@ -1290,7 +1323,7 @@ _ASBOX
       for ac_var in $ac_subst_files
       do
 	eval ac_val=$`echo $ac_var`
-        echo "$ac_var='"'"'$ac_val'"'"'"
+	echo "$ac_var='"'"'$ac_val'"'"'"
       done | sort
       echo
     fi
@@ -1309,7 +1342,7 @@ _ASBOX
       echo "$as_me: caught signal $ac_signal"
     echo "$as_me: exit $exit_status"
   } >&5
-  rm -f core core.* *.core &&
+  rm -f core *.core &&
   rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
     exit $exit_status
      ' 0
@@ -1389,7 +1422,7 @@ fi
 # value.
 ac_cache_corrupted=false
 for ac_var in `(set) 2>&1 |
-               sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+	       sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
   eval ac_old_set=\$ac_cv_env_${ac_var}_set
   eval ac_new_set=\$ac_env_${ac_var}_set
   eval ac_old_val="\$ac_cv_env_${ac_var}_value"
@@ -1406,13 +1439,13 @@ echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
     ,);;
     *)
       if test "x$ac_old_val" != "x$ac_new_val"; then
-        { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-        { echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
+	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
 echo "$as_me:   former value:  $ac_old_val" >&2;}
-        { echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
+	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
 echo "$as_me:   current value: $ac_new_val" >&2;}
-        ac_cache_corrupted=:
+	ac_cache_corrupted=:
       fi;;
   esac
   # Pass precious variables to config.status.
@@ -1955,7 +1988,6 @@ ac_compiler=`set X $ac_compile; echo $2`
   (exit $ac_status); }
 
 cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -1975,8 +2007,8 @@ ac_clean_files="$ac_clean_files a.out a.exe b.out"
 # Try to create an executable without -o first, disregard a.out.
 # It will help us diagnose broken compilers, and finding out an intuition
 # of exeext.
-echo "$as_me:$LINENO: checking for C compiler default output" >&5
-echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6
+echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
 ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
 if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
   (eval $ac_link_default) 2>&5
@@ -1996,23 +2028,23 @@ do
   test -f "$ac_file" || continue
   case $ac_file in
     *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
-        ;;
+	;;
     conftest.$ac_ext )
-        # This is the source file.
-        ;;
+	# This is the source file.
+	;;
     [ab].out )
-        # We found the default executable, but exeext='' is most
-        # certainly right.
-        break;;
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
     *.* )
-        ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-        # FIXME: I believe we export ac_cv_exeext for Libtool,
-        # but it would be cool to find out if it's true.  Does anybody
-        # maintain Libtool? --akim.
-        export ac_cv_exeext
-        break;;
+	ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	# FIXME: I believe we export ac_cv_exeext for Libtool,
+	# but it would be cool to find out if it's true.  Does anybody
+	# maintain Libtool? --akim.
+	export ac_cv_exeext
+	break;;
     * )
-        break;;
+	break;;
   esac
 done
 else
@@ -2086,8 +2118,8 @@ for ac_file in conftest.exe conftest conftest.*; do
   case $ac_file in
     *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
     *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-          export ac_cv_exeext
-          break;;
+	  export ac_cv_exeext
+	  break;;
     * ) break;;
   esac
 done
@@ -2112,7 +2144,6 @@ if test "${ac_cv_objext+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2163,7 +2194,6 @@ if test "${ac_cv_c_compiler_gnu+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2183,11 +2213,21 @@ main ()
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
+  (eval $ac_compile) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2200,7 +2240,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_compiler_gnu=no
 fi
-rm -f conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_cv_c_compiler_gnu=$ac_compiler_gnu
 
 fi
@@ -2216,7 +2256,6 @@ if test "${ac_cv_prog_cc_g+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2233,11 +2272,21 @@ main ()
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
+  (eval $ac_compile) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2250,7 +2299,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_cv_prog_cc_g=no
 fi
-rm -f conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
 echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
 echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
@@ -2277,7 +2326,6 @@ else
   ac_cv_prog_cc_stdc=no
 ac_save_CC=$CC
 cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2305,6 +2353,16 @@ static char *f (char * (*g) (char **, int), char **p, ...)
   va_end (v);
   return s;
 }
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std1 is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std1.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
 int test (int i, double x);
 struct s1 {int (*f) (int a);};
 struct s2 {int (*f) (double a);};
@@ -2331,11 +2389,21 @@ do
   CC="$ac_save_CC $ac_arg"
   rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
+  (eval $ac_compile) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2348,7 +2416,7 @@ else
 sed 's/^/| /' conftest.$ac_ext >&5
 
 fi
-rm -f conftest.$ac_objext
+rm -f conftest.err conftest.$ac_objext
 done
 rm -f conftest.$ac_ext conftest.$ac_objext
 CC=$ac_save_CC
@@ -2376,19 +2444,28 @@ cat >conftest.$ac_ext <<_ACEOF
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
+  (eval $ac_compile) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
   for ac_declaration in \
-   ''\
-   '#include <stdlib.h>' \
+   '' \
    'extern "C" void std::exit (int) throw (); using std::exit;' \
    'extern "C" void std::exit (int); using std::exit;' \
    'extern "C" void exit (int) throw ();' \
@@ -2396,14 +2473,13 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
    'void exit (int);'
 do
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
-#include <stdlib.h>
 $ac_declaration
+#include <stdlib.h>
 int
 main ()
 {
@@ -2414,11 +2490,21 @@ exit (42);
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
+  (eval $ac_compile) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2431,9 +2517,8 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 continue
 fi
-rm -f conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2450,11 +2535,21 @@ exit (42);
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
+  (eval $ac_compile) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2466,7 +2561,7 @@ else
 sed 's/^/| /' conftest.$ac_ext >&5
 
 fi
-rm -f conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 done
 rm -f conftest*
 if test -n "$ac_declaration"; then
@@ -2480,7 +2575,7 @@ else
 sed 's/^/| /' conftest.$ac_ext >&5
 
 fi
-rm -f conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -2507,12 +2602,13 @@ do
     done
   done
 done
+IFS=$as_save_IFS
 lt_ac_max=0
 lt_ac_count=0
 # Add /usr/xpg4/bin/sed as it is typically found on Solaris
 # along with /bin/sed that truncates output.
 for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-  test ! -f $lt_ac_sed && break
+  test ! -f $lt_ac_sed && continue
   cat /dev/null > conftest.in
   lt_ac_count=0
   echo $ECHO_N "0123456789$ECHO_C" >conftest.in
@@ -2537,10 +2633,11 @@ for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
     fi
   done
 done
-SED=$lt_cv_path_SED
 
 fi
 
+SED=$lt_cv_path_SED
+
 echo "$as_me:$LINENO: result: $SED" >&5
 echo "${ECHO_T}$SED" >&6
 
@@ -2583,7 +2680,7 @@ echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6
     # Accept absolute paths.
     [\\/]* | ?:[\\/]*)
       re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
+      # Canonicalize the pathname of ld
       ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
       while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
 	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
@@ -2617,7 +2714,7 @@ else
     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
       lt_cv_path_LD="$ac_dir/$ac_prog"
       # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
+      # but apparently some variants of GNU ld only accept -v.
       # Break only if it was the GNU/non-GNU ld that we prefer.
       case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
       *GNU* | *'with BFD'*)
@@ -2651,8 +2748,8 @@ echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
 if test "${lt_cv_prog_gnu_ld+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-case `"$LD" -v 2>&1 </dev/null` in
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
 *GNU* | *'with BFD'*)
   lt_cv_prog_gnu_ld=yes
   ;;
@@ -2681,6 +2778,15 @@ case $reload_flag in
 *) reload_flag=" $reload_flag" ;;
 esac
 reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
 
 echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
 echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
@@ -2691,36 +2797,43 @@ else
   # Let the user override the test.
   lt_cv_path_NM="$NM"
 else
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm="$ac_dir/${ac_tool_prefix}nm"
-    if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-      */dev/null* | *'Invalid file or object type'*)
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-        ;;
-      *)
-	case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-	*/dev/null*)
-	  lt_cv_path_NM="$tmp_nm -p"
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
 	  break
 	  ;;
 	*)
-	  lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	  continue # so that we can try to find one that supports BSD flags
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
 	  ;;
 	esac
-      esac
-    fi
+      fi
+    done
+    IFS="$lt_save_ifs"
   done
-  IFS="$lt_save_ifs"
   test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
 fi
 fi
@@ -2739,8 +2852,8 @@ else
 echo "${ECHO_T}no, using $LN_S" >&6
 fi
 
-echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5
-echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6
+echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
+echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6
 if test "${lt_cv_deplibs_check_method+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2767,40 +2880,42 @@ beos*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-bsdi4*)
+bsdi[45]*)
   lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
   lt_cv_file_magic_cmd='/usr/bin/file -L'
   lt_cv_file_magic_test_file=/shlib/libc.so
   ;;
 
-cygwin* | mingw* | pw32*)
-  # win32_libid is a shell function defined in ltmain.sh
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
   lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-  lt_cv_file_magic_cmd='win32_libid'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  if ( file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
   ;;
 
 darwin* | rhapsody*)
-  # this will be overwritten by pass_all, but leave it in just in case
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[012])
-    lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System`
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-freebsd*)
+freebsd* | dragonfly*)
   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
       # Not sure whether the presence of OpenBSD here was a mistake.
       # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
       lt_cv_file_magic_cmd=/usr/bin/file
       lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
       ;;
@@ -2816,7 +2931,7 @@ gnu*)
 
 hpux10.20* | hpux11*)
   lt_cv_file_magic_cmd=/usr/bin/file
-  case "$host_cpu" in
+  case $host_cpu in
   ia64*)
     lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
     lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
@@ -2832,37 +2947,24 @@ hpux10.20* | hpux11*)
   esac
   ;;
 
+interix[3-9]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
+
 irix5* | irix6* | nonstopux*)
-  case $host_os in
-  irix5* | nonstopux*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
-    ;;
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
   esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 # This must be Linux ELF.
-linux*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh*)
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+linux* | k*bsd*-gnu)
+  lt_cv_deplibs_check_method=pass_all
   ;;
 
 netbsd*)
@@ -2879,37 +2981,31 @@ newos6*)
   lt_cv_file_magic_test_file=/usr/lib/libnls.so
   ;;
 
-nto-qnx)
+nto-qnx*)
   lt_cv_deplibs_check_method=unknown
   ;;
 
 openbsd*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
   if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
   else
-    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
   fi
   ;;
 
 osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-sco3.2v5*)
+rdos*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 solaris*)
   lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
   ;;
 
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+sysv4 | sysv4.3*)
   case $host_vendor in
   motorola)
     lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
@@ -2930,10 +3026,13 @@ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
   siemens)
     lt_cv_deplibs_check_method=pass_all
     ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
   esac
   ;;
 
-sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7* | sysv4*uw2*)
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 esac
@@ -2951,6 +3050,9 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
 # Allow CC to be a program name with arguments.
 compiler=$CC
 
@@ -2986,7 +3088,7 @@ ia64-*-hpux*)
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 2989 "configure"' > conftest.$ac_ext
+  echo '#line 3091 "configure"' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -3021,7 +3123,8 @@ ia64-*-hpux*)
   rm -rf conftest*
   ;;
 
-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|sparc*-*linux*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
@@ -3029,13 +3132,16 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
-    case "`/usr/bin/file conftest.o`" in
+    case `/usr/bin/file conftest.o` in
     *32-bit*)
       case $host in
+        x86_64-*kfreebsd*-gnu)
+          LD="${LD-ld} -m elf_i386_fbsd"
+          ;;
         x86_64-*linux*)
           LD="${LD-ld} -m elf_i386"
           ;;
-        ppc64-*linux*)
+        ppc64-*linux*|powerpc64-*linux*)
           LD="${LD-ld} -m elf32ppclinux"
           ;;
         s390x-*linux*)
@@ -3048,6 +3154,9 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
       ;;
     *64-bit*)
       case $host in
+        x86_64-*kfreebsd*-gnu)
+          LD="${LD-ld} -m elf_x86_64_fbsd"
+          ;;
         x86_64-*linux*)
           LD="${LD-ld} -m elf_x86_64"
           ;;
@@ -3083,7 +3192,6 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
      cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3100,11 +3208,21 @@ main ()
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+  (eval $ac_link) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3117,7 +3235,8 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 lt_cv_cc_needs_belf=no
 fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
      ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -3132,6 +3251,26 @@ echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
     CFLAGS="$SAVE_CFLAGS"
   fi
   ;;
+sparc*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*) LD="${LD-ld} -m elf64_sparc" ;;
+      *)    LD="${LD-ld} -64" ;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
 
 esac
 
@@ -3166,7 +3305,6 @@ do
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp. "Syntax error" is here to catch this case.
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3177,7 +3315,7 @@ cat >>conftest.$ac_ext <<_ACEOF
 #else
 # include <assert.h>
 #endif
-                     Syntax error
+		     Syntax error
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
@@ -3189,6 +3327,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (exit $ac_status); } >/dev/null; then
   if test -s conftest.err; then
     ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
   else
     ac_cpp_err=
   fi
@@ -3209,7 +3348,6 @@ rm -f conftest.err conftest.$ac_ext
   # OK, works on sane cases.  Now check whether non-existent headers
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3227,6 +3365,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (exit $ac_status); } >/dev/null; then
   if test -s conftest.err; then
     ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
   else
     ac_cpp_err=
   fi
@@ -3273,7 +3412,6 @@ do
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp. "Syntax error" is here to catch this case.
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3284,7 +3422,7 @@ cat >>conftest.$ac_ext <<_ACEOF
 #else
 # include <assert.h>
 #endif
-                     Syntax error
+		     Syntax error
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
@@ -3296,6 +3434,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (exit $ac_status); } >/dev/null; then
   if test -s conftest.err; then
     ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
   else
     ac_cpp_err=
   fi
@@ -3316,7 +3455,6 @@ rm -f conftest.err conftest.$ac_ext
   # OK, works on sane cases.  Now check whether non-existent headers
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3334,6 +3472,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (exit $ac_status); } >/dev/null; then
   if test -s conftest.err; then
     ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
   else
     ac_cpp_err=
   fi
@@ -3379,7 +3518,6 @@ if test "${ac_cv_header_stdc+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3400,11 +3538,21 @@ main ()
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
+  (eval $ac_compile) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3417,12 +3565,11 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_cv_header_stdc=no
 fi
-rm -f conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3444,7 +3591,6 @@ fi
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3469,7 +3615,6 @@ if test $ac_cv_header_stdc = yes; then
   :
 else
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3481,9 +3626,9 @@ cat >>conftest.$ac_ext <<_ACEOF
 # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
 #else
 # define ISLOWER(c) \
-                   (('a' <= (c) && (c) <= 'i') \
-                     || ('j' <= (c) && (c) <= 'r') \
-                     || ('s' <= (c) && (c) <= 'z'))
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
 # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
 #endif
 
@@ -3494,7 +3639,7 @@ main ()
   int i;
   for (i = 0; i < 256; i++)
     if (XOR (islower (i), ISLOWER (i))
-        || toupper (i) != TOUPPER (i))
+	|| toupper (i) != TOUPPER (i))
       exit(2);
   exit (0);
 }
@@ -3519,7 +3664,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 ( exit $ac_status )
 ac_cv_header_stdc=no
 fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 fi
 fi
@@ -3544,7 +3689,7 @@ fi
 
 
 for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-                  inttypes.h stdint.h unistd.h
+		  inttypes.h stdint.h unistd.h
 do
 as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
 echo "$as_me:$LINENO: checking for $ac_header" >&5
@@ -3553,7 +3698,6 @@ if eval "test \"\${$as_ac_Header+set}\" = set"; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3565,11 +3709,21 @@ $ac_includes_default
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
+  (eval $ac_compile) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3582,7 +3736,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 eval "$as_ac_Header=no"
 fi
-rm -f conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
 echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
@@ -3613,7 +3767,6 @@ else
 echo "$as_me:$LINENO: checking $ac_header usability" >&5
 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3624,11 +3777,21 @@ $ac_includes_default
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
+  (eval $ac_compile) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3641,7 +3804,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_header_compiler=no
 fi
-rm -f conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
 echo "${ECHO_T}$ac_header_compiler" >&6
 
@@ -3649,7 +3812,6 @@ echo "${ECHO_T}$ac_header_compiler" >&6
 echo "$as_me:$LINENO: checking $ac_header presence" >&5
 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3667,6 +3829,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (exit $ac_status); } >/dev/null; then
   if test -s conftest.err; then
     ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
   else
     ac_cpp_err=
   fi
@@ -3686,32 +3849,31 @@ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
 echo "${ECHO_T}$ac_header_preproc" >&6
 
 # So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc in
-  yes:no )
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+  yes:no: )
     { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to bug-autoconf@gnu.org. ##
-## ------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+    ac_header_preproc=yes
     ;;
-  no:yes )
+  no:yes:* )
     { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
     (
       cat <<\_ASBOX
 ## ------------------------------------ ##
-## Report this to bug-autoconf@gnu.org. ##
+## Report this to mflatt@plt-scheme.org ##
 ## ------------------------------------ ##
 _ASBOX
     ) |
@@ -3723,7 +3885,7 @@ echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
 if eval "test \"\${$as_ac_Header+set}\" = set"; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  eval "$as_ac_Header=$ac_header_preproc"
+  eval "$as_ac_Header=\$ac_header_preproc"
 fi
 echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
@@ -3857,7 +4019,6 @@ if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3877,11 +4038,21 @@ main ()
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
+  (eval $ac_compile) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
+	 { ac_try='test -z "$ac_cxx_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3894,7 +4065,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_compiler_gnu=no
 fi
-rm -f conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
 
 fi
@@ -3910,7 +4081,6 @@ if test "${ac_cv_prog_cxx_g+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3927,11 +4097,21 @@ main ()
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
+  (eval $ac_compile) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
+	 { ac_try='test -z "$ac_cxx_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3944,7 +4124,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_cv_prog_cxx_g=no
 fi
-rm -f conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
 echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
 echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6
@@ -3964,8 +4144,7 @@ else
   fi
 fi
 for ac_declaration in \
-   ''\
-   '#include <stdlib.h>' \
+   '' \
    'extern "C" void std::exit (int) throw (); using std::exit;' \
    'extern "C" void std::exit (int); using std::exit;' \
    'extern "C" void exit (int) throw ();' \
@@ -3973,14 +4152,13 @@ for ac_declaration in \
    'void exit (int);'
 do
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
-#include <stdlib.h>
 $ac_declaration
+#include <stdlib.h>
 int
 main ()
 {
@@ -3991,11 +4169,21 @@ exit (42);
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
+  (eval $ac_compile) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
+	 { ac_try='test -z "$ac_cxx_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4008,9 +4196,8 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 continue
 fi
-rm -f conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -4027,11 +4214,21 @@ exit (42);
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
+  (eval $ac_compile) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
+	 { ac_try='test -z "$ac_cxx_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4043,7 +4240,7 @@ else
 sed 's/^/| /' conftest.$ac_ext >&5
 
 fi
-rm -f conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 done
 rm -f conftest*
 if test -n "$ac_declaration"; then
@@ -4058,7 +4255,12 @@ ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 
-ac_ext=cc
+
+
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  ac_ext=cc
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
@@ -4082,7 +4284,6 @@ do
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp. "Syntax error" is here to catch this case.
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -4093,7 +4294,7 @@ cat >>conftest.$ac_ext <<_ACEOF
 #else
 # include <assert.h>
 #endif
-                     Syntax error
+		     Syntax error
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
@@ -4105,6 +4306,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (exit $ac_status); } >/dev/null; then
   if test -s conftest.err; then
     ac_cpp_err=$ac_cxx_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
   else
     ac_cpp_err=
   fi
@@ -4125,7 +4327,6 @@ rm -f conftest.err conftest.$ac_ext
   # OK, works on sane cases.  Now check whether non-existent headers
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -4143,6 +4344,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (exit $ac_status); } >/dev/null; then
   if test -s conftest.err; then
     ac_cpp_err=$ac_cxx_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
   else
     ac_cpp_err=
   fi
@@ -4189,7 +4391,6 @@ do
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp. "Syntax error" is here to catch this case.
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -4200,7 +4401,7 @@ cat >>conftest.$ac_ext <<_ACEOF
 #else
 # include <assert.h>
 #endif
-                     Syntax error
+		     Syntax error
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
@@ -4212,6 +4413,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (exit $ac_status); } >/dev/null; then
   if test -s conftest.err; then
     ac_cpp_err=$ac_cxx_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
   else
     ac_cpp_err=
   fi
@@ -4232,7 +4434,6 @@ rm -f conftest.err conftest.$ac_ext
   # OK, works on sane cases.  Now check whether non-existent headers
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -4250,6 +4451,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (exit $ac_status); } >/dev/null; then
   if test -s conftest.err; then
     ac_cpp_err=$ac_cxx_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
   else
     ac_cpp_err=
   fi
@@ -4288,13 +4490,15 @@ ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 
+fi
+
 
 ac_ext=f
 ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
 ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_f77_compiler_gnu
 if test -n "$ac_tool_prefix"; then
-  for ac_prog in g77 f77 xlf frt pgf77 fl32 af77 fort77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 lf95 g95
+  for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
@@ -4336,7 +4540,7 @@ fi
 fi
 if test -z "$F77"; then
   ac_ct_F77=$F77
-  for ac_prog in g77 f77 xlf frt pgf77 fl32 af77 fort77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 lf95 g95
+  for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
@@ -4381,7 +4585,7 @@ fi
 
 
 # Provide some information about the compiler.
-echo "$as_me:4384:" \
+echo "$as_me:4588:" \
      "checking for Fortran 77 compiler version" >&5
 ac_compiler=`set X $ac_compile; echo $2`
 { (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
@@ -4399,9 +4603,10 @@ ac_compiler=`set X $ac_compile; echo $2`
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
+rm -f a.out
 
 # If we don't use `.F' as extension, the preprocessor is not run on the
-# input file.
+# input file.  (Note that this only needs to work for GNU compilers.)
 ac_save_ext=$ac_ext
 ac_ext=F
 echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
@@ -4419,11 +4624,21 @@ else
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
+  (eval $ac_compile) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
+	 { ac_try='test -z "$ac_f77_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4436,14 +4651,13 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_compiler_gnu=no
 fi
-rm -f conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_cv_f77_compiler_gnu=$ac_compiler_gnu
 
 fi
 echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
 echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6
 ac_ext=$ac_save_ext
-G77=`test $ac_compiler_gnu = yes && echo yes`
 ac_test_FFLAGS=${FFLAGS+set}
 ac_save_FFLAGS=$FFLAGS
 FFLAGS=
@@ -4460,11 +4674,21 @@ cat >conftest.$ac_ext <<_ACEOF
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
+  (eval $ac_compile) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
+	 { ac_try='test -z "$ac_f77_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4477,7 +4701,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_cv_prog_f77_g=no
 fi
-rm -f conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 
 fi
 echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
@@ -4485,18 +4709,20 @@ echo "${ECHO_T}$ac_cv_prog_f77_g" >&6
 if test "$ac_test_FFLAGS" = set; then
   FFLAGS=$ac_save_FFLAGS
 elif test $ac_cv_prog_f77_g = yes; then
-  if test "$G77" = yes; then
+  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
     FFLAGS="-g -O2"
   else
     FFLAGS="-g"
   fi
 else
-  if test "$G77" = yes; then
+  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
     FFLAGS="-O2"
   else
     FFLAGS=
   fi
 fi
+
+G77=`test $ac_compiler_gnu = yes && echo yes`
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -4514,7 +4740,7 @@ if test "${lt_cv_sys_max_cmd_len+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
     i=0
-  testring="ABCD"
+  teststring="ABCD"
 
   case $build_os in
   msdosdjgpp*)
@@ -4543,24 +4769,77 @@ else
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
- *)
-    # If test is not a shell built-in, we'll probably end up computing a
-    # maximum length that is only half of the actual maximum length, but
-    # we can't tell.
-    while (test "X"`$CONFIG_SHELL $0 --fallback-echo "X$testring" 2>/dev/null` \
-	       = "XX$testring") >/dev/null 2>&1 &&
-	    new_result=`expr "X$testring" : ".*" 2>&1` &&
-	    lt_cv_sys_max_cmd_len=$new_result &&
-	    test $i != 17 # 1/2 MB should be enough
-    do
-      i=`expr $i + 1`
-      testring=$testring$testring
-    done
-    testring=
-    # Add a significant safety factor because C++ compilers can tack on massive
-    # amounts of additional arguments before passing them to the linker.
-    # It appears as though 1/2 is a usable value.
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ 	]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
+	       = "XX$teststring") >/dev/null 2>&1 &&
+	      new_result=`expr "X$teststring" : ".*" 2>&1` &&
+	      lt_cv_sys_max_cmd_len=$new_result &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on massive
+      # amounts of additional arguments before passing them to the linker.
+      # It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
     ;;
   esac
 
@@ -4577,6 +4856,7 @@ fi
 
 
 
+
 # Check for command to grab the raw symbol name followed by C symbol from nm.
 echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
 echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6
@@ -4593,9 +4873,6 @@ symcode='[BCDEGRST]'
 # Regexp to match symbols that can be accessed directly from C.
 sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
 
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \2\3 \3'
-
 # Transform an extracted symbol line into a proper C declaration
 lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
 
@@ -4617,14 +4894,30 @@ hpux*) # Its linker distinguishes data from code symbols
   lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
   lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
   ;;
+linux* | k*bsd*-gnu)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDGIRSTW]'
+    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  fi
+  ;;
 irix* | nonstopux*)
   symcode='[BCDEGRST]'
   ;;
 osf*)
   symcode='[BCDEGQRST]'
   ;;
-solaris* | sysv5*)
-  symcode='[BDT]'
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
   ;;
 sysv4)
   symcode='[DFNSTU]'
@@ -4642,14 +4935,17 @@ esac
 # If we're using GNU nm, then use its standard symbol codes.
 case `$NM -V 2>&1` in
 *GNU* | *'with BFD'*)
-  symcode='[ABCDGISTW]' ;;
+  symcode='[ABCDGIRSTW]' ;;
 esac
 
 # Try without a prefix undercore, then with it.
 for ac_symprfx in "" "_"; do
 
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
   # Write the raw and C identifiers.
-  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
+  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
 
   # Check to see that the pipe works correctly.
   pipe_works=no
@@ -4811,7 +5107,7 @@ esac
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
+Xsed='sed -e 1s/^X//'
 sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
 
 # Same as above, but do not quote variable references.
@@ -4831,7 +5127,7 @@ rm="rm -f"
 default_ofile=libtool
 can_build_shared=yes
 
-# All known linkers require a `.a' archive for static linking (except M$VC,
+# All known linkers require a `.a' archive for static linking (except MSVC,
 # which needs '.lib').
 libext=a
 ltmain="$ac_aux_dir/ltmain.sh"
@@ -5088,6 +5384,7 @@ test -z "$AR_FLAGS" && AR_FLAGS=cru
 test -z "$AS" && AS=as
 test -z "$CC" && CC=cc
 test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
 test -z "$DLLTOOL" && DLLTOOL=dlltool
 test -z "$LD" && LD=ld
 test -z "$LN_S" && LN_S="ln -s"
@@ -5100,22 +5397,33 @@ test -z "$STRIP" && STRIP=:
 test -z "$ac_objext" && ac_objext=o
 
 # Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
 old_postinstall_cmds='chmod 644 $oldlib'
 old_postuninstall_cmds=
 
 if test -n "$RANLIB"; then
   case $host_os in
   openbsd*)
-    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
     ;;
   *)
-    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
     ;;
   esac
   old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
 fi
 
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+
 # Only perform the check for file, if the check method requires it
 case $deplibs_check_method in
 file_magic*)
@@ -5141,7 +5449,7 @@ else
       if test -n "$file_magic_test_file"; then
 	case $deplibs_check_method in
 	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
 	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
 	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
 	    $EGREP "$file_magic_regex" > /dev/null; then
@@ -5203,7 +5511,7 @@ else
       if test -n "$file_magic_test_file"; then
 	case $deplibs_check_method in
 	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
 	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
 	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
 	    $EGREP "$file_magic_regex" > /dev/null; then
@@ -5289,77 +5597,34 @@ objext=o
 objext=$objext
 
 # Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
+lt_simple_compile_test_code="int some_variable = 0;"
 
 # Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}\n'
+lt_simple_link_test_code='int main(){return(0);}'
 
 
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
 # Allow CC to be a program name with arguments.
 compiler=$CC
 
 
-#
-# Check for any special shared library compilation flags.
-#
-lt_prog_cc_shlib=
-if test "$GCC" = no; then
-  case $host_os in
-  sco3.2v5*)
-    lt_prog_cc_shlib='-belf'
-    ;;
-  esac
-fi
-if test -n "$lt_prog_cc_shlib"; then
-  { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&5
-echo "$as_me: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&2;}
-  if echo "$old_CC $old_CFLAGS " | grep "[ 	]$lt_prog_cc_shlib[ 	]" >/dev/null; then :
-  else
-    { echo "$as_me:$LINENO: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5
-echo "$as_me: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;}
-    lt_cv_prog_cc_can_build_shared=no
-  fi
-fi
-
-
-#
-# Check to make sure the static flag actually works.
-#
-echo "$as_me:$LINENO: checking if $compiler static flag $lt_prog_compiler_static works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_prog_compiler_static works... $ECHO_C" >&6
-if test "${lt_prog_compiler_static_works+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_prog_compiler_static_works=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_prog_compiler_static"
-   printf "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-     else
-       lt_prog_compiler_static_works=yes
-     fi
-   fi
-   $rm conftest*
-   LDFLAGS="$save_LDFLAGS"
-
-fi
-echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works" >&6
-
-if test x"$lt_prog_compiler_static_works" = xyes; then
-    :
-else
-    lt_prog_compiler_static=
-fi
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
 
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
 
 
 ## CAVEAT EMPTOR:
@@ -5372,14 +5637,15 @@ lt_prog_compiler_no_builtin_flag=
 if test "$GCC" = yes; then
   lt_prog_compiler_no_builtin_flag=' -fno-builtin'
 
-  echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+
+echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
 echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
 if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   lt_cv_prog_compiler_rtti_exceptions=no
   ac_outfile=conftest.$ac_objext
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="-fno-rtti -fno-exceptions"
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
@@ -5387,18 +5653,20 @@ else
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    # The option is referenced via a variable to avoid confusing sed.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:5393: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:5659: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:5397: \$? = $ac_status" >&5
+   echo "$as_me:5663: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test ! -s conftest.err; then
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_rtti_exceptions=yes
      fi
    fi
@@ -5443,13 +5711,15 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
       ;;
 
-    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
       # PIC is the default for these OSes.
       ;;
 
-    mingw* | pw32* | os2*)
+    mingw* | cygwin* | pw32* | os2*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
       lt_prog_compiler_pic='-DDLL_EXPORT'
       ;;
 
@@ -5459,6 +5729,11 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_pic='-fno-common'
       ;;
 
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
     msdosdjgpp*)
       # Just because we use GCC doesn't mean we suddenly get shared libraries
       # on systems that don't support them.
@@ -5475,7 +5750,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
     hpux*)
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
-      case "$host_cpu" in
+      case $host_cpu in
       hppa*64*|ia64*)
 	# +Z the default
 	;;
@@ -5501,8 +5776,18 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
       fi
       ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case $cc_basename in
+         xlc*)
+         lt_prog_compiler_pic='-qnocommon'
+         lt_prog_compiler_wl='-Wl,'
+         ;;
+       esac
+       ;;
 
-    mingw* | pw32* | os2*)
+    mingw* | cygwin* | pw32* | os2*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       lt_prog_compiler_pic='-DDLL_EXPORT'
@@ -5512,7 +5797,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_wl='-Wl,'
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
-      case "$host_cpu" in
+      case $host_cpu in
       hppa*64*|ia64*)
 	# +Z the default
 	;;
@@ -5535,18 +5820,41 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_static='-Bstatic'
       ;;
 
-    linux*)
-      case $CC in
-      icc|ecc)
+    linux* | k*bsd*-gnu)
+      case $cc_basename in
+      icc* | ecc*)
 	lt_prog_compiler_wl='-Wl,'
 	lt_prog_compiler_pic='-KPIC'
 	lt_prog_compiler_static='-static'
         ;;
-      ccc)
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
         lt_prog_compiler_wl='-Wl,'
         # All Alpha code is PIC.
         lt_prog_compiler_static='-non_shared'
         ;;
+      *)
+        case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+	*Sun\ F*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	esac
+	;;
       esac
       ;;
 
@@ -5556,15 +5864,19 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_static='-non_shared'
       ;;
 
-    sco3.2v5*)
-      lt_prog_compiler_pic='-Kpic'
-      lt_prog_compiler_static='-dn'
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
       ;;
 
     solaris*)
-      lt_prog_compiler_wl='-Wl,'
       lt_prog_compiler_pic='-KPIC'
       lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
       ;;
 
     sunos4*)
@@ -5573,7 +5885,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_static='-Bstatic'
       ;;
 
-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+    sysv4 | sysv4.2uw2* | sysv4.3*)
       lt_prog_compiler_wl='-Wl,'
       lt_prog_compiler_pic='-KPIC'
       lt_prog_compiler_static='-Bstatic'
@@ -5586,6 +5898,17 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       fi
       ;;
 
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
     uts4*)
       lt_prog_compiler_pic='-pic'
       lt_prog_compiler_static='-Bstatic'
@@ -5604,14 +5927,15 @@ echo "${ECHO_T}$lt_prog_compiler_pic" >&6
 # Check to make sure the PIC flag actually works.
 #
 if test -n "$lt_prog_compiler_pic"; then
-  echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+
+echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
 echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6
 if test "${lt_prog_compiler_pic_works+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   lt_prog_compiler_pic_works=no
   ac_outfile=conftest.$ac_objext
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
@@ -5619,18 +5943,20 @@ else
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    # The option is referenced via a variable to avoid confusing sed.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:5625: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:5949: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:5629: \$? = $ac_status" >&5
+   echo "$as_me:5953: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test ! -s conftest.err; then
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_prog_compiler_pic_works=yes
      fi
    fi
@@ -5651,7 +5977,7 @@ else
 fi
 
 fi
-case "$host_os" in
+case $host_os in
   # For platforms which do not support PIC, -DPIC is meaningless:
   *djgpp*)
     lt_prog_compiler_pic=
@@ -5661,6 +5987,48 @@ case "$host_os" in
     ;;
 esac
 
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+if test "${lt_prog_compiler_static_works+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_static_works=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_prog_compiler_static_works=yes
+       fi
+     else
+       lt_prog_compiler_static_works=yes
+     fi
+   fi
+   $rm conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works" >&6
+
+if test x"$lt_prog_compiler_static_works" = xyes; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
 echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
 echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
 if test "${lt_cv_prog_compiler_c_o+set}" = set; then
@@ -5671,14 +6039,7 @@ else
    mkdir conftest
    cd conftest
    mkdir out
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-   # that will create temporary files in the current directory regardless of
-   # the output directory.  Thus, making CWD read-only will cause this test
-   # to fail, enabling locking or at least warning the user not to do parallel
-   # builds.
-   chmod -w .
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
    lt_compiler_flag="-o out/conftest2.$ac_objext"
    # Insert the option either (1) after the last *FLAGS variable, or
@@ -5686,25 +6047,30 @@ else
    # Note that $ac_compile itself does not contain backslashes and begins
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:5692: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:6053: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:5696: \$? = $ac_status" >&5
+   echo "$as_me:6057: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     if test ! -s out/conftest.err; then
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_c_o=yes
      fi
    fi
-   chmod u+w .
-   $rm conftest* out/*
-   rmdir out
+   chmod u+w . 2>&5
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
    cd ..
    rmdir conftest
    $rm conftest*
@@ -5775,6 +6141,16 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
   # rely on this symbol name, it's probably fine to never include it in
   # preloaded symbol tables.
   extract_expsyms_cmds=
+  # Just being paranoid about ensuring that cc_basename is set.
+  for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
   case $host_os in
   cygwin* | mingw* | pw32*)
@@ -5785,6 +6161,10 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
       with_gnu_ld=no
     fi
     ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
   openbsd*)
     with_gnu_ld=no
     ;;
@@ -5795,6 +6175,27 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
     # If archive_cmds runs LD, not CC, wlarc should be empty
     wlarc='${wl}'
 
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>/dev/null` in
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
     # See if GNU ld supports shared libraries.
     case $host_os in
     aix3* | aix4* | aix5*)
@@ -5845,10 +6246,10 @@ EOF
       allow_undefined_flag=unsupported
       always_export_symbols=no
       enable_shared_with_static_runtimes=yes
-      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
 
       if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 	# If the export-symbols file already is a .def file (1st line
 	# is EXPORTS), use it as is; otherwise, prepend...
 	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
@@ -5857,7 +6258,62 @@ EOF
 	  echo EXPORTS > $output_objdir/$soname.def;
 	  cat $export_symbols >> $output_objdir/$soname.def;
 	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000  ${wl}--out-implib,$lib'
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | k*bsd*-gnu)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	tmp_addflag=
+	case $cc_basename,$host_cpu in
+	pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	*)
+	  tmp_sharedflag='-shared' ;;
+	esac
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+	if test $supports_anon_versioning = yes; then
+	  archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+  $echo "local: *; };" >> $output_objdir/$libname.ver~
+	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	fi
       else
 	ld_shlibs=no
       fi
@@ -5873,7 +6329,7 @@ EOF
       fi
       ;;
 
-    solaris* | sysv5*)
+    solaris*)
       if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
 	ld_shlibs=no
 	cat <<EOF 1>&2
@@ -5894,6 +6350,33 @@ EOF
       fi
       ;;
 
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
     sunos4*)
       archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
       wlarc=
@@ -5911,16 +6394,11 @@ EOF
       ;;
     esac
 
-    if test "$ld_shlibs" = yes; then
-      runpath_var=LD_RUN_PATH
-      hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
-      export_dynamic_flag_spec='${wl}--export-dynamic'
-      # ancient GNU ld didn't support --whole-archive et. al.
-      if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- 	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	whole_archive_flag_spec=
-      fi
+    if test "$ld_shlibs" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
     fi
   else
     # PORTME fill in a description of your system's linker (not GNU ld)
@@ -5932,7 +6410,7 @@ EOF
       # Note: this linker hardcodes the directories in LIBPATH if there
       # are no directories specified by -L.
       hardcode_minus_L=yes
-      if test "$GCC" = yes && test -z "$link_static_flag"; then
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
 	# Neither direct hardcoding nor static linking is supported with a
 	# broken collect2.
 	hardcode_direct=unsupported
@@ -5966,6 +6444,7 @@ EOF
   	    break
   	  fi
 	  done
+	  ;;
 	esac
 
 	exp_sym_flag='-bexport'
@@ -5984,7 +6463,7 @@ EOF
       link_all_deplibs=yes
 
       if test "$GCC" = yes; then
-	case $host_os in aix4.012|aix4.012.*)
+	case $host_os in aix4.[012]|aix4.[012].*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
 	  collect2name=`${CC} -print-prog-name=collect2`
@@ -5992,7 +6471,7 @@ EOF
   	   strings "$collect2name" | grep resolve_lib_name >/dev/null
 	  then
   	  # We have reworked collect2
-  	  hardcode_direct=yes
+  	  :
 	  else
   	  # We have old collect2
   	  hardcode_direct=unsupported
@@ -6003,8 +6482,12 @@ EOF
   	  hardcode_libdir_flag_spec='-L$libdir'
   	  hardcode_libdir_separator=
 	  fi
+	  ;;
 	esac
 	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
       else
 	# not using gcc
 	if test "$host_cpu" = ia64; then
@@ -6012,11 +6495,11 @@ EOF
   	# chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
 	else
-  	if test "$aix_use_runtimelinking" = yes; then
+	  if test "$aix_use_runtimelinking" = yes; then
 	    shared_flag='${wl}-G'
 	  else
 	    shared_flag='${wl}-bM:SRE'
-  	fi
+	  fi
 	fi
       fi
 
@@ -6029,7 +6512,6 @@ EOF
 	allow_undefined_flag='-berok'
        # Determine the default libpath from the value encoded in an empty executable.
        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -6046,41 +6528,58 @@ main ()
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+  (eval $ac_link) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
 
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 # Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+	archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
        else
 	if test "$host_cpu" = ia64; then
 	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
 	  allow_undefined_flag="-z nodefs"
-	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
 	else
 	 # Determine the default libpath from the value encoded in an empty executable.
 	 cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -6097,28 +6596,46 @@ main ()
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+  (eval $ac_link) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
 
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 # Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
 	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
@@ -6126,13 +6643,11 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	  # -berok will link without error, but may produce a broken library.
 	  no_undefined_flag=' ${wl}-bernotok'
 	  allow_undefined_flag=' ${wl}-berok'
-	  # -bexpall does not export symbols beginning with underscore (_)
-	  always_export_symbols=yes
 	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec=' '
+	  whole_archive_flag_spec='$convenience'
 	  archive_cmds_need_lc=yes
-	  # This is similar to how AIX traditionally builds it's shared libraries.
-	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
 	fi
       fi
       ;;
@@ -6145,7 +6660,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ld_shlibs=no
       ;;
 
-    bsdi4*)
+    bsdi[45]*)
       export_dynamic_flag_spec=-rdynamic
       ;;
 
@@ -6159,55 +6674,64 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       # Tell ltmain to make .lib files, not .a files.
       libext=lib
       # Tell ltmain to make .dll files, not .so files.
-      shrext=".dll"
+      shrext_cmds=".dll"
       # FIXME: Setting linknames here is a bad hack.
       archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
       # The linker will automatically build a .lib file if we build a DLL.
       old_archive_From_new_cmds='true'
       # FIXME: Should let the user specify the lib program.
-      old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
+      old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
       fix_srcfile_path='`cygpath -w "$srcfile"`'
       enable_shared_with_static_runtimes=yes
       ;;
 
     darwin* | rhapsody*)
-    if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-      archive_cmds_need_lc=no
-      case "$host_os" in
-      rhapsody* | darwin1.[012])
-	allow_undefined_flag='-undefined suppress'
-	;;
-      *) # Darwin 1.3 on
-	test -z ${LD_TWOLEVEL_NAMESPACE} && allow_undefined_flag='-flat_namespace -undefined suppress'
-	;;
+      case $host_os in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
       esac
-      # FIXME: Relying on posixy $() will cause problems for
-      #        cross-compilation, but unfortunately the echo tests do not
-      #        yet detect zsh echo's removal of \ escapes.  Also zsh mangles
-      #	       `"' quotes if we put them in here... so don't!
-    	lt_int_apple_cc_single_mod=no
-    	output_verbose_link_cmd='echo'
-    	if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-    	  lt_int_apple_cc_single_mod=yes
-    	fi
-    	if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-    	  archive_cmds='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-    	else
-        archive_cmds='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      fi
-      module_cmds='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-        if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-          archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        else
-          archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        fi
-          module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag  -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      archive_cmds_need_lc=no
       hardcode_direct=no
       hardcode_automatic=yes
       hardcode_shlibpath_var=unsupported
-      whole_archive_flag_spec='-all_load $convenience'
+      whole_archive_flag_spec=''
       link_all_deplibs=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+      archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
+         module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+         archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs=no
+          ;;
+      esac
     fi
       ;;
 
@@ -6241,7 +6765,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd*)
+    freebsd* | dragonfly*)
       archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
       hardcode_libdir_flag_spec='-R$libdir'
       hardcode_direct=yes
@@ -6264,47 +6788,62 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       export_dynamic_flag_spec='${wl}-E'
       ;;
 
-    hpux10* | hpux11*)
+    hpux10*)
       if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case "$host_cpu" in
-	hppa*64*|ia64*)
+	archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+
+	hardcode_direct=yes
+	export_dynamic_flag_spec='${wl}-E'
+
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
 	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
 	*)
 	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
-	case "$host_cpu" in
-	hppa*64*|ia64*)
-	  archive_cmds='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       fi
       if test "$with_gnu_ld" = no; then
-	case "$host_cpu" in
-	hppa*64*)
-	  hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-	  hardcode_libdir_flag_spec_ld='+b $libdir'
-	  hardcode_libdir_separator=:
-	  hardcode_direct=no
-	  hardcode_shlibpath_var=no
-	  ;;
-	ia64*)
-	  hardcode_libdir_flag_spec='-L$libdir'
-	  hardcode_direct=no
-	  hardcode_shlibpath_var=no
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
 
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  hardcode_minus_L=yes
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_libdir_flag_spec_ld='+b $libdir'
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
 	  ;;
 	*)
-	  hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-	  hardcode_libdir_separator=:
 	  hardcode_direct=yes
 	  export_dynamic_flag_spec='${wl}-E'
 
@@ -6348,23 +6887,28 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ;;
 
     openbsd*)
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec='${wl}-E'
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+        fi
       else
-       case $host_os in
-	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	   archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	   hardcode_libdir_flag_spec='-R$libdir'
-	   ;;
-	 *)
-	   archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	   hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	   ;;
-       esac
+	ld_shlibs=no
       fi
       ;;
 
@@ -6397,7 +6941,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	allow_undefined_flag=' -expect_unresolved \*'
 	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
 	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	hardcode_libdir_flag_spec='-rpath $libdir'
@@ -6405,21 +6949,15 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_libdir_separator=:
       ;;
 
-    sco3.2v5*)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var=no
-      export_dynamic_flag_spec='${wl}-Bexport'
-      runpath_var=LD_RUN_PATH
-      hardcode_runpath_var=yes
-      ;;
-
     solaris*)
       no_undefined_flag=' -z text'
       if test "$GCC" = yes; then
+	wlarc='${wl}'
 	archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
 	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
       else
+	wlarc=''
 	archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
 	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
   	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
@@ -6428,8 +6966,17 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_shlibpath_var=no
       case $host_os in
       solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-	whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+	fi
+	;;
       esac
       link_all_deplibs=yes
       ;;
@@ -6486,36 +7033,45 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       fi
       ;;
 
-    sysv4.2uw2*)
-      archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=yes
-      hardcode_minus_L=no
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag='${wl}-z,text'
+      archive_cmds_need_lc=no
       hardcode_shlibpath_var=no
-      hardcode_runpath_var=yes
-      runpath_var=LD_RUN_PATH
-      ;;
+      runpath_var='LD_RUN_PATH'
 
-   sysv5OpenUNIX8* | sysv5UnixWare7* |  sysv5uw[78]* | unixware7*)
-      no_undefined_flag='${wl}-z ${wl}text'
       if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var=no
       ;;
 
-    sysv5*)
-      no_undefined_flag=' -z text'
-      # $CC -shared without GNU ld will not create a library from C++
-      # object files and a static libstdc++, better avoid it by now
-      archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      hardcode_libdir_flag_spec=
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='${wl}-z,text'
+      allow_undefined_flag='${wl}-z,nodefs'
+      archive_cmds_need_lc=no
       hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='${wl}-Bexport'
       runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
       ;;
 
     uts4*)
@@ -6534,11 +7090,6 @@ echo "$as_me:$LINENO: result: $ld_shlibs" >&5
 echo "${ECHO_T}$ld_shlibs" >&6
 test "$ld_shlibs" = no && can_build_shared=no
 
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
 #
 # Do we need to explicitly link libc?
 #
@@ -6559,7 +7110,7 @@ x|xyes)
       echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
 echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
       $rm conftest*
-      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
       if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
@@ -6571,6 +7122,7 @@ echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&
         libobjs=conftest.$ac_objext
         deplibs=
         wl=$lt_prog_compiler_wl
+	pic_flag=$lt_prog_compiler_pic
         compiler_flags=-v
         linker_flags=-v
         verstring=
@@ -6601,78 +7153,12 @@ echo "${ECHO_T}$archive_cmds_need_lc" >&6
   ;;
 esac
 
-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
-   test -n "$runpath_var " || \
-   test "X$hardcode_automatic"="Xyes" ; then
-
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
-     test "$hardcode_minus_L" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action=unsupported
-fi
-echo "$as_me:$LINENO: result: $hardcode_action" >&5
-echo "${ECHO_T}$hardcode_action" >&6
-
-if test "$hardcode_action" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-striplib=
-old_striplib=
-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-   darwin*)
-       if test -n "$STRIP" ; then
-         striplib="$STRIP -x"
-         echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-       else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-       ;;
-   *)
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-    ;;
-  esac
-fi
-
 echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
 echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
-shrext=".so"
+shrext_cmds=".so"
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
@@ -6682,17 +7168,55 @@ shlibpath_overrides_runpath=unknown
 version_type=none
 dynamic_linker="$host_os ld.so"
 sys_lib_dlsearch_path_spec="/lib /usr/lib"
+
 if test "$GCC" = yes; then
-  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
     # if the path contains ";" then we assume it to be the separator
     # otherwise default to the standard path separator (i.e. ":") - it is
     # assumed that no part of a normal pathname contains ";" but that should
     # okay in the real world where ";" in dirpaths is itself problematic.
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
   else
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
   fi
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  sys_lib_search_path_spec=`echo $lt_search_path_spec`
 else
   sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
 fi
@@ -6760,7 +7284,7 @@ aix4* | aix5*)
 amigaos*)
   library_names_spec='$libname.ixlibrary $libname.a'
   # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
   ;;
 
 beos*)
@@ -6769,7 +7293,7 @@ beos*)
   shlibpath_var=LIBRARY_PATH
   ;;
 
-bsdi4*)
+bsdi[45]*)
   version_type=linux
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -6785,7 +7309,7 @@ bsdi4*)
 
 cygwin* | mingw* | pw32*)
   version_type=windows
-  shrext=".dll"
+  shrext_cmds=".dll"
   need_version=no
   need_lib_prefix=no
 
@@ -6797,7 +7321,8 @@ cygwin* | mingw* | pw32*)
       dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname'
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
     postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
       dlpath=$dir/\$dldll~
        $rm \$dlpath'
@@ -6807,7 +7332,7 @@ cygwin* | mingw* | pw32*)
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
       ;;
     mingw*)
       # MinGW DLLs use traditional 'lib' prefix
@@ -6827,7 +7352,7 @@ cygwin* | mingw* | pw32*)
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
       ;;
     esac
     ;;
@@ -6846,18 +7371,13 @@ darwin* | rhapsody*)
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  # FIXME: Relying on posixy $() will cause problems for
-  #        cross-compilation, but unfortunately the echo tests do not
-  #        yet detect zsh echo's removal of \ escapes.
   library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
-  shrext='$(test .$module = .yes && echo .so || echo .dylib)'
-  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-  if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-  sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-  fi
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
   sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
   ;;
 
@@ -6874,8 +7394,17 @@ freebsd1*)
   dynamic_linker=no
   ;;
 
-freebsd*)
-  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
@@ -6893,14 +7422,19 @@ freebsd*)
   freebsd2*)
     shlibpath_overrides_runpath=yes
     ;;
-  freebsd3.01* | freebsdelf3.01*)
+  freebsd3.[01]* | freebsdelf3.[01]*)
     shlibpath_overrides_runpath=yes
     hardcode_into_libs=yes
     ;;
-  *) # from 3.2 on
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
     shlibpath_overrides_runpath=no
     hardcode_into_libs=yes
     ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
   esac
   ;;
 
@@ -6920,9 +7454,9 @@ hpux9* | hpux10* | hpux11*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
-  case "$host_cpu" in
+  case $host_cpu in
   ia64*)
-    shrext='.so'
+    shrext_cmds='.so'
     hardcode_into_libs=yes
     dynamic_linker="$host_os dld.so"
     shlibpath_var=LD_LIBRARY_PATH
@@ -6937,7 +7471,7 @@ hpux9* | hpux10* | hpux11*)
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
    hppa*64*)
-     shrext='.sl'
+     shrext_cmds='.sl'
      hardcode_into_libs=yes
      dynamic_linker="$host_os dld.sl"
      shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
@@ -6948,7 +7482,7 @@ hpux9* | hpux10* | hpux11*)
      sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
      ;;
    *)
-    shrext='.sl'
+    shrext_cmds='.sl'
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
@@ -6960,6 +7494,18 @@ hpux9* | hpux10* | hpux11*)
   postinstall_cmds='chmod 555 $lib'
   ;;
 
+interix[3-9]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
 irix5* | irix6* | nonstopux*)
   case $host_os in
     nonstopux*) version_type=nonstopux ;;
@@ -7003,7 +7549,7 @@ linux*oldld* | linux*aout* | linux*coff*)
   ;;
 
 # This must be Linux ELF.
-linux*)
+linux* | k*bsd*-gnu)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -7017,6 +7563,12 @@ linux*)
   # before this can be enabled.
   hardcode_into_libs=yes
 
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
   # We used to test for /lib/ld.so.1 and disable shared libraries on
   # powerpc, because MkLinux only supported shared libraries with the
   # GNU dynamic linker.  Since this was broken with cross compilers,
@@ -7035,7 +7587,7 @@ netbsd*)
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
   else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
     soname_spec='${libname}${release}${shared_ext}$major'
     dynamic_linker='NetBSD ld.elf_so'
   fi
@@ -7051,7 +7603,7 @@ newsos6)
   shlibpath_overrides_runpath=yes
   ;;
 
-nto-qnx)
+nto-qnx*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -7063,8 +7615,13 @@ nto-qnx)
 
 openbsd*)
   version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
   need_lib_prefix=no
-  need_version=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
@@ -7084,7 +7641,7 @@ openbsd*)
 
 os2*)
   libname_spec='$name'
-  shrext=".dll"
+  shrext_cmds=".dll"
   need_lib_prefix=no
   library_names_spec='$libname${shared_ext} $libname.a'
   dynamic_linker='OS/2 ld.exe'
@@ -7102,11 +7659,8 @@ osf3* | osf4* | osf5*)
   sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
   ;;
 
-sco3.2v5*)
-  version_type=osf
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
+rdos*)
+  dynamic_linker=no
   ;;
 
 solaris*)
@@ -7134,7 +7688,7 @@ sunos4*)
   need_version=yes
   ;;
 
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+sysv4 | sysv4.3*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
@@ -7167,6 +7721,29 @@ sysv4*MP*)
   fi
   ;;
 
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
 uts4*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -7182,6 +7759,78 @@ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
 echo "${ECHO_T}$dynamic_linker" >&6
 test "$dynamic_linker" = no && can_build_shared=no
 
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" || \
+   test -n "$runpath_var" || \
+   test "X$hardcode_automatic" = "Xyes" ; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+echo "$as_me:$LINENO: result: $hardcode_action" >&5
+echo "${ECHO_T}$hardcode_action" >&6
+
+if test "$hardcode_action" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+striplib=
+old_striplib=
+echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+   darwin*)
+       if test -n "$STRIP" ; then
+         striplib="$STRIP -x"
+         old_striplib="$STRIP -S"
+         echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+       else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+       ;;
+   *)
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+    ;;
+  esac
+fi
+
 if test "x$enable_dlopen" != xyes; then
   enable_dlopen=unknown
   enable_dlopen_self=unknown
@@ -7217,7 +7866,6 @@ else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-ldl  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -7241,11 +7889,21 @@ dlopen ();
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+  (eval $ac_link) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -7258,7 +7916,8 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_cv_lib_dl_dlopen=no
 fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
 echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
@@ -7282,21 +7941,28 @@ if test "${ac_cv_func_shl_load+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
+/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define shl_load innocuous_shl_load
+
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char shl_load (); below.
     Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
     <limits.h> exists even on freestanding compilers.  */
+
 #ifdef __STDC__
 # include <limits.h>
 #else
 # include <assert.h>
 #endif
+
+#undef shl_load
+
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
 extern "C"
@@ -7327,11 +7993,21 @@ return f != shl_load;
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+  (eval $ac_link) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -7344,7 +8020,8 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_cv_func_shl_load=no
 fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
 fi
 echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
 echo "${ECHO_T}$ac_cv_func_shl_load" >&6
@@ -7359,7 +8036,6 @@ else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-ldld  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -7383,11 +8059,21 @@ shl_load ();
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+  (eval $ac_link) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -7400,7 +8086,8 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_cv_lib_dld_shl_load=no
 fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
 echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
@@ -7414,21 +8101,28 @@ if test "${ac_cv_func_dlopen+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
+/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define dlopen innocuous_dlopen
+
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char dlopen (); below.
     Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
     <limits.h> exists even on freestanding compilers.  */
+
 #ifdef __STDC__
 # include <limits.h>
 #else
 # include <assert.h>
 #endif
+
+#undef dlopen
+
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
 extern "C"
@@ -7459,11 +8153,21 @@ return f != dlopen;
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+  (eval $ac_link) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -7476,7 +8180,8 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_cv_func_dlopen=no
 fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
 fi
 echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
 echo "${ECHO_T}$ac_cv_func_dlopen" >&6
@@ -7491,7 +8196,6 @@ else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-ldl  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -7515,11 +8219,21 @@ dlopen ();
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+  (eval $ac_link) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -7532,7 +8246,8 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_cv_lib_dl_dlopen=no
 fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
 echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
@@ -7548,7 +8263,6 @@ else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lsvld  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -7572,11 +8286,21 @@ dlopen ();
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+  (eval $ac_link) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -7589,7 +8313,8 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_cv_lib_svld_dlopen=no
 fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
 echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
@@ -7605,7 +8330,6 @@ else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-ldld  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -7629,11 +8353,21 @@ dld_link ();
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+  (eval $ac_link) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -7646,7 +8380,8 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_cv_lib_dld_dld_link=no
 fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
 echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
@@ -7685,7 +8420,7 @@ fi
     test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
 
     save_LDFLAGS="$LDFLAGS"
-    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
 
     save_LIBS="$LIBS"
     LIBS="$lt_cv_dlopen_libs $LIBS"
@@ -7701,7 +8436,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 7704 "configure"
+#line 8439 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -7758,6 +8493,8 @@ int main ()
       else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
       /* dlclose (self); */
     }
+  else
+    puts (dlerror ());
 
     exit (status);
 }
@@ -7767,12 +8504,12 @@ EOF
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
+    (./conftest; exit; ) >&5 2>/dev/null
     lt_status=$?
     case x$lt_status in
       x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
       x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
     esac
   else :
     # compilation failed
@@ -7787,7 +8524,7 @@ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
 echo "${ECHO_T}$lt_cv_dlopen_self" >&6
 
     if test "x$lt_cv_dlopen_self" = xyes; then
-      LDFLAGS="$LDFLAGS $link_static_flag"
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
       echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
 echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
 if test "${lt_cv_dlopen_self_static+set}" = set; then
@@ -7799,7 +8536,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 7802 "configure"
+#line 8539 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -7856,6 +8593,8 @@ int main ()
       else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
       /* dlclose (self); */
     }
+  else
+    puts (dlerror ());
 
     exit (status);
 }
@@ -7865,12 +8604,12 @@ EOF
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
+    (./conftest; exit; ) >&5 2>/dev/null
     lt_status=$?
     case x$lt_status in
       x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
       x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
     esac
   else :
     # compilation failed
@@ -7903,7 +8642,7 @@ echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
 fi
 
 
-# Report which librarie types wil actually be built
+# Report which library types will actually be built
 echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
 echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
 echo "$as_me:$LINENO: result: $can_build_shared" >&5
@@ -7915,7 +8654,7 @@ test "$can_build_shared" = "no" && enable_shared=no
 
 # On AIX, shared libraries and static libraries use the same namespace, and
 # are all built from PIC.
-case "$host_os" in
+case $host_os in
 aix3*)
   test "$enable_shared" = yes && enable_static=no
   if test -n "$RANLIB"; then
@@ -7924,38 +8663,10 @@ aix3*)
   fi
   ;;
 
-aix4*)
+aix4* | aix5*)
   if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
     test "$enable_shared" = yes && enable_static=no
   fi
-  ;;
-  darwin* | rhapsody*)
-  if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-    archive_cmds_need_lc=no
-    case "$host_os" in
-    rhapsody* | darwin1.[012])
-      allow_undefined_flag='-undefined suppress'
-      ;;
-    *) # Darwin 1.3 on
-      test -z ${LD_TWOLEVEL_NAMESPACE} && allow_undefined_flag='-flat_namespace -undefined suppress'
-      ;;
-    esac
-    # FIXME: Relying on posixy $() will cause problems for
-    #        cross-compilation, but unfortunately the echo tests do not
-    #        yet detect zsh echo's removal of \ escapes.  Also zsh mangles
-    #	       `"' quotes if we put them in here... so don't!
-		output_verbose_link_cmd='echo'
-    archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
-    module_cmds='$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-    # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-		  archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag  -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-		  module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag  -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    hardcode_direct=no
-    hardcode_automatic=yes
-    hardcode_shlibpath_var=unsupported
-    whole_archive_flag_spec='-all_load $convenience'
-    link_all_deplibs=yes
-    fi
     ;;
 esac
 echo "$as_me:$LINENO: result: $enable_shared" >&5
@@ -7981,7 +8692,8 @@ if test -f "$ltmain"; then
   # Now quote all the things that may contain metacharacters while being
   # careful not to overquote the AC_SUBSTed values.  We take copies of the
   # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
     libname_spec library_names_spec soname_spec extract_expsyms_cmds \
     old_striplib striplib file_magic_cmd finish_cmds finish_eval \
     deplibs_check_method reload_flag reload_cmds need_locks \
@@ -8022,6 +8734,7 @@ if test -f "$ltmain"; then
     module_cmds \
     module_expsym_cmds \
     lt_cv_prog_compiler_c_o \
+    fix_srcfile_path \
     exclude_expsyms \
     include_expsyms; do
 
@@ -8066,7 +8779,7 @@ echo "$as_me: creating $ofile" >&6;}
 # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
 #
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
 # Free Software Foundation, Inc.
 #
 # This file is part of GNU Libtool:
@@ -8084,7 +8797,7 @@ echo "$as_me: creating $ofile" >&6;}
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -8095,11 +8808,11 @@ echo "$as_me: creating $ofile" >&6;}
 SED=$lt_SED
 
 # Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e s/^X//"
+Xsed="$SED -e 1s/^X//"
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 # The names of the tagged configurations supported by this script.
 available_tags=
@@ -8129,6 +8842,12 @@ fast_install=$enable_fast_install
 # The host system.
 host_alias=$host_alias
 host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
 
 # An echo program that does not interpret backslashes.
 echo=$lt_echo
@@ -8140,6 +8859,9 @@ AR_FLAGS=$lt_AR_FLAGS
 # A C compiler.
 LTCC=$lt_LTCC
 
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
 # A language-specific compiler.
 CC=$lt_compiler
 
@@ -8159,7 +8881,7 @@ LN_S=$lt_LN_S
 NM=$lt_NM
 
 # A symbol stripping program
-STRIP=$STRIP
+STRIP=$lt_STRIP
 
 # Used to examine libraries when file_magic_cmd begins "file"
 MAGIC_CMD=$MAGIC_CMD
@@ -8190,7 +8912,7 @@ objext="$ac_objext"
 libext="$libext"
 
 # Shared library suffix (normally ".so").
-shrext='$shrext'
+shrext_cmds='$shrext_cmds'
 
 # Executable file suffix (normally "").
 exeext="$exeext"
@@ -8205,7 +8927,7 @@ max_cmd_len=$lt_cv_sys_max_cmd_len
 # Does compiler simultaneously support -c and -o options?
 compiler_c_o=$lt_lt_cv_prog_compiler_c_o
 
-# Must we lock files when doing compilation ?
+# Must we lock files when doing compilation?
 need_locks=$lt_need_locks
 
 # Do we need the lib prefix for modules?
@@ -8381,7 +9103,7 @@ sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
 # Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path"
+fix_srcfile_path=$lt_fix_srcfile_path
 
 # Set to yes if exported symbols are required.
 always_export_symbols=$always_export_symbols
@@ -8432,7 +9154,10 @@ else
   # If there is no Makefile yet, we rely on a make rule to execute
   # `config.status --recheck' to rerun these tests and create the
   # libtool script then.
-  test -f Makefile && make "$ltmain"
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
 fi
 
 
@@ -8467,6 +9192,9 @@ echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script
 echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
     fi
   fi
+  if test -z "$LTCFLAGS"; then
+    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
+  fi
 
   # Extract list of available tagged configurations in $ofile.
   # Note that this assumes the entire list is on one line.
@@ -8497,7 +9225,9 @@ echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
 
       case $tagname in
       CXX)
-	if test -n "$CXX" && test "X$CXX" != "Xno"; then
+	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+	    (test "X$CXX" != "Xg++"))) ; then
 	  ac_ext=cc
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -8517,6 +9247,7 @@ hardcode_libdir_flag_spec_CXX=
 hardcode_libdir_flag_spec_ld_CXX=
 hardcode_libdir_separator_CXX=
 hardcode_minus_L_CXX=no
+hardcode_shlibpath_var_CXX=unsupported
 hardcode_automatic_CXX=no
 module_cmds_CXX=
 module_expsym_cmds_CXX=
@@ -8534,27 +9265,44 @@ postdeps_CXX=
 compiler_lib_search_path_CXX=
 
 # Source file extension for C++ test sources.
-ac_ext=cc
+ac_ext=cpp
 
 # Object file extension for compiled C++ test sources.
 objext=o
 objext_CXX=$objext
 
 # Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
+lt_simple_compile_test_code="int some_variable = 0;"
 
 # Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *) { return(0); }\n'
+lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
 
 # ltmain only uses $CC for tagged configurations so make sure $CC is set.
 
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
 # Allow CC to be a program name with arguments.
 compiler=$CC
 
 
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
 # Allow CC to be a program name with arguments.
 lt_save_CC=$CC
 lt_save_LD=$LD
@@ -8565,18 +9313,27 @@ lt_save_path_LD=$lt_cv_path_LD
 if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
   lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
 else
-  unset lt_cv_prog_gnu_ld
+  $as_unset lt_cv_prog_gnu_ld
 fi
 if test -n "${lt_cv_path_LDCXX+set}"; then
   lt_cv_path_LD=$lt_cv_path_LDCXX
 else
-  unset lt_cv_path_LD
+  $as_unset lt_cv_path_LD
 fi
 test -z "${LDCXX+set}" || LD=$LDCXX
 CC=${CXX-"c++"}
 compiler=$CC
 compiler_CXX=$CC
-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
 
 # We don't want -fno-exception wen compiling C++ code, so set the
 # no_builtin_flag separately
@@ -8613,7 +9370,7 @@ echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6
     # Accept absolute paths.
     [\\/]* | ?:[\\/]*)
       re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
+      # Canonicalize the pathname of ld
       ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
       while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
 	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
@@ -8647,7 +9404,7 @@ else
     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
       lt_cv_path_LD="$ac_dir/$ac_prog"
       # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
+      # but apparently some variants of GNU ld only accept -v.
       # Break only if it was the GNU/non-GNU ld that we prefer.
       case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
       *GNU* | *'with BFD'*)
@@ -8681,8 +9438,8 @@ echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
 if test "${lt_cv_prog_gnu_ld+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-case `"$LD" -v 2>&1 </dev/null` in
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
 *GNU* | *'with BFD'*)
   lt_cv_prog_gnu_ld=yes
   ;;
@@ -8727,7 +9484,7 @@ with_gnu_ld=$lt_cv_prog_gnu_ld
     # linker, instead of GNU ld.  If possible, this setting should
     # overridden to take advantage of the native linker features on
     # the platform it is being used on.
-    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
   fi
 
   # Commands to make compiler produce verbose output that lists
@@ -8772,6 +9529,7 @@ case $host_os in
 	    ;;
 	  esac
 	done
+	;;
       esac
 
       exp_sym_flag='-bexport'
@@ -8790,7 +9548,7 @@ case $host_os in
     link_all_deplibs_CXX=yes
 
     if test "$GXX" = yes; then
-      case $host_os in aix4.012|aix4.012.*)
+      case $host_os in aix4.[012]|aix4.[012].*)
       # We only want to do this on AIX 4.2 and lower, the check
       # below for broken collect2 doesn't work under 4.3+
 	collect2name=`${CC} -print-prog-name=collect2`
@@ -8798,7 +9556,7 @@ case $host_os in
 	   strings "$collect2name" | grep resolve_lib_name >/dev/null
 	then
 	  # We have reworked collect2
-	  hardcode_direct_CXX=yes
+	  :
 	else
 	  # We have old collect2
 	  hardcode_direct_CXX=unsupported
@@ -8809,8 +9567,12 @@ case $host_os in
 	  hardcode_libdir_flag_spec_CXX='-L$libdir'
 	  hardcode_libdir_separator_CXX=
 	fi
+	;;
       esac
       shared_flag='-shared'
+      if test "$aix_use_runtimelinking" = yes; then
+	shared_flag="$shared_flag "'${wl}-G'
+      fi
     else
       # not using gcc
       if test "$host_cpu" = ia64; then
@@ -8835,7 +9597,6 @@ case $host_os in
       allow_undefined_flag_CXX='-berok'
       # Determine the default libpath from the value encoded in an empty executable.
       cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -8852,42 +9613,59 @@ main ()
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+  (eval $ac_link) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
+	 { ac_try='test -z "$ac_cxx_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
 
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 # Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
       hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
 
-      archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
      else
       if test "$host_cpu" = ia64; then
 	hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
 	allow_undefined_flag_CXX="-z nodefs"
-	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
       else
 	# Determine the default libpath from the value encoded in an empty executable.
 	cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -8904,28 +9682,46 @@ main ()
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+  (eval $ac_link) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
+	 { ac_try='test -z "$ac_cxx_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
 
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 # Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
 	hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
@@ -8933,16 +9729,26 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	# -berok will link without error, but may produce a broken library.
 	no_undefined_flag_CXX=' ${wl}-bernotok'
 	allow_undefined_flag_CXX=' ${wl}-berok'
-	# -bexpall does not export symbols beginning with underscore (_)
-	always_export_symbols_CXX=yes
 	# Exported symbols can be pulled into shared objects from archives
-	whole_archive_flag_spec_CXX=' '
+	whole_archive_flag_spec_CXX='$convenience'
 	archive_cmds_need_lc_CXX=yes
-	# This is similar to how AIX traditionally builds it's shared libraries.
-	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	# This is similar to how AIX traditionally builds its shared libraries.
+	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
       fi
     fi
     ;;
+
+  beos*)
+    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+      allow_undefined_flag_CXX=unsupported
+      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+      # support --undefined.  This deserves some investigation.  FIXME
+      archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    else
+      ld_shlibs_CXX=no
+    fi
+    ;;
+
   chorus*)
     case $cc_basename in
       *)
@@ -8961,7 +9767,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     enable_shared_with_static_runtimes_CXX=yes
 
     if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-      archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+      archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
       # If the export-symbols file already is a .def file (1st line
       # is EXPORTS), use it as is; otherwise, prepend...
       archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
@@ -8970,57 +9776,81 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	echo EXPORTS > $output_objdir/$soname.def;
 	cat $export_symbols >> $output_objdir/$soname.def;
       fi~
-      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
     else
       ld_shlibs_CXX=no
     fi
   ;;
+      darwin* | rhapsody*)
+        case $host_os in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+        esac
+      archive_cmds_need_lc_CXX=no
+      hardcode_direct_CXX=no
+      hardcode_automatic_CXX=yes
+      hardcode_shlibpath_var_CXX=unsupported
+      whole_archive_flag_spec_CXX=''
+      link_all_deplibs_CXX=yes
 
-  darwin* | rhapsody*)
-   if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-    archive_cmds_need_lc_CXX=no
-    case "$host_os" in
-    rhapsody* | darwin1.[012])
-      allow_undefined_flag_CXX='-undefined suppress'
-      ;;
-    *) # Darwin 1.3 on
-      test -z ${LD_TWOLEVEL_NAMESPACE} && allow_undefined_flag_CXX='-flat_namespace -undefined suppress'
-      ;;
-    esac
-    	lt_int_apple_cc_single_mod=no
-    	output_verbose_link_cmd='echo'
-    	if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-    	  lt_int_apple_cc_single_mod=yes
-    	fi
-    	if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-    	  archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-    	else
-        archive_cmds_CXX='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+    if test "$GXX" = yes ; then
+      lt_int_apple_cc_single_mod=no
+      output_verbose_link_cmd='echo'
+      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
+       lt_int_apple_cc_single_mod=yes
       fi
-      module_cmds_CXX='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-
-    # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
       if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-        archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+       archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
       else
-        archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+        fi
+        module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          else
+            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          fi
+            module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+          archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
+          module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+          archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs_CXX=no
+          ;;
+      esac
       fi
-        module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag  -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    hardcode_direct_CXX=no
-    hardcode_automatic_CXX=yes
-    hardcode_shlibpath_var_CXX=unsupported
-    whole_archive_flag_spec_CXX='-all_load $convenience'
-    link_all_deplibs_CXX=yes
-   fi
-    ;;
+        ;;
 
   dgux*)
     case $cc_basename in
-      ec++)
+      ec++*)
 	# FIXME: insert proper C++ library support
 	ld_shlibs_CXX=no
 	;;
-      ghcx)
+      ghcx*)
 	# Green Hills C++ Compiler
 	# FIXME: insert proper C++ library support
 	ld_shlibs_CXX=no
@@ -9031,14 +9861,14 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	;;
     esac
     ;;
-  freebsd12*)
+  freebsd[12]*)
     # C++ shared libraries reported to be fairly broken before switch to ELF
     ld_shlibs_CXX=no
     ;;
   freebsd-elf*)
     archive_cmds_need_lc_CXX=no
     ;;
-  freebsd*)
+  freebsd* | dragonfly*)
     # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
     # conventions
     ld_shlibs_CXX=yes
@@ -9055,11 +9885,11 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 				# location of the library.
 
     case $cc_basename in
-    CC)
+    CC*)
       # FIXME: insert proper C++ library support
       ld_shlibs_CXX=no
       ;;
-    aCC)
+    aCC*)
       archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       # Commands to make compiler produce verbose output that lists
       # what "hidden" libraries, object files and flags are used when
@@ -9069,7 +9899,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       # explicitly linking system object files so we need to strip them
       # from the output so that they don't get included in the library
       # dependencies.
-      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
       ;;
     *)
       if test "$GXX" = yes; then
@@ -9083,34 +9913,21 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     ;;
   hpux10*|hpux11*)
     if test $with_gnu_ld = no; then
-      case "$host_cpu" in
-      hppa*64*)
-	hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-	hardcode_libdir_flag_spec_ld_CXX='+b $libdir'
-	hardcode_libdir_separator_CXX=:
-        ;;
-      ia64*)
-	hardcode_libdir_flag_spec_CXX='-L$libdir'
-        ;;
+      hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator_CXX=:
+
+      case $host_cpu in
+      hppa*64*|ia64*) ;;
       *)
-	hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_CXX=:
 	export_dynamic_flag_spec_CXX='${wl}-E'
         ;;
       esac
     fi
-    case "$host_cpu" in
-    hppa*64*)
+    case $host_cpu in
+    hppa*64*|ia64*)
       hardcode_direct_CXX=no
       hardcode_shlibpath_var_CXX=no
       ;;
-    ia64*)
-      hardcode_direct_CXX=no
-      hardcode_shlibpath_var_CXX=no
-      hardcode_minus_L_CXX=yes # Not in the search PATH,
-					      # but as the default
-					      # location of the library.
-      ;;
     *)
       hardcode_direct_CXX=yes
       hardcode_minus_L_CXX=yes # Not in the search PATH,
@@ -9120,14 +9937,17 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     esac
 
     case $cc_basename in
-      CC)
+      CC*)
 	# FIXME: insert proper C++ library support
 	ld_shlibs_CXX=no
 	;;
-      aCC)
-	case "$host_cpu" in
-	hppa*64*|ia64*)
-	  archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
+      aCC*)
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	  ;;
 	*)
 	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
@@ -9146,9 +9966,12 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       *)
 	if test "$GXX" = yes; then
 	  if test $with_gnu_ld = no; then
-	    case "$host_cpu" in
-	    ia64*|hppa*64*)
-	      archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
+	    case $host_cpu in
+	    hppa*64*)
+	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    ia64*)
+	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	      ;;
 	    *)
 	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
@@ -9162,11 +9985,25 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	;;
     esac
     ;;
+  interix[3-9]*)
+    hardcode_direct_CXX=no
+    hardcode_shlibpath_var_CXX=no
+    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+    export_dynamic_flag_spec_CXX='${wl}-E'
+    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+    # Instead, shared libraries are loaded at an image base (0x10000000 by
+    # default) and relocated if they conflict, which is a slow very memory
+    # consuming and fragmenting process.  To avoid this, we pick a random,
+    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+    archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+    archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+    ;;
   irix5* | irix6*)
     case $cc_basename in
-      CC)
+      CC*)
 	# SGI C++
-	archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+	archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
 
 	# Archives containing C++ object files must be created using
 	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
@@ -9177,7 +10014,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       *)
 	if test "$GXX" = yes; then
 	  if test "$with_gnu_ld" = no; then
-	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	  else
 	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
 	  fi
@@ -9188,9 +10025,9 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
     hardcode_libdir_separator_CXX=:
     ;;
-  linux*)
+  linux* | k*bsd*-gnu)
     case $cc_basename in
-      KCC)
+      KCC*)
 	# Kuck and Associates, Inc. (KAI) C++ Compiler
 
 	# KCC will only create a shared library if the output file
@@ -9215,17 +10052,41 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
 	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
 	;;
-      icpc)
+      icpc*)
 	# Intel C++
 	with_gnu_ld=yes
+	# version 8.0 and above of icpc choke on multiply defined symbols
+	# if we add $predep_objects and $postdep_objects, however 7.1 and
+	# earlier do not add the objects themselves.
+	case `$CC -V 2>&1` in
+	*"Version 7."*)
+  	  archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+  	  archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	*)  # Version 8.0 or newer
+	  tmp_idyn=
+	  case $host_cpu in
+	    ia64*) tmp_idyn=' -i_dynamic';;
+	  esac
+  	  archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	  archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	esac
 	archive_cmds_need_lc_CXX=no
-	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
 	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
 	whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
 	;;
-      cxx)
+      pgCC*)
+        # Portland Group C++ compiler
+	archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+  	archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+
+	hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
+	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+        ;;
+      cxx*)
 	# Compaq C++
 	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
 	archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
@@ -9244,6 +10105,29 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	# dependencies.
 	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
 	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)
+	  # Sun C++ 5.9
+	  no_undefined_flag_CXX=' -zdefs'
+	  archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	  hardcode_libdir_flag_spec_CXX='-R$libdir'
+	  whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+
+	  # Not sure whether something based on
+	  # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	  # would be better.
+	  output_verbose_link_cmd='echo'
+
+	  # Archives containing C++ object files must be created using
+	  # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	  # necessary to make sure instantiated templates are included
+	  # in the archive.
+	  old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+	  ;;
+	esac
+	;;
     esac
     ;;
   lynxos*)
@@ -9256,7 +10140,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     ;;
   mvs*)
     case $cc_basename in
-      cxx)
+      cxx*)
 	# FIXME: insert proper C++ library support
 	ld_shlibs_CXX=no
 	;;
@@ -9277,9 +10161,29 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     # Workaround some broken pre-1.5 toolchains
     output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
     ;;
+  openbsd2*)
+    # C++ shared libraries are fairly broken
+    ld_shlibs_CXX=no
+    ;;
+  openbsd*)
+    if test -f /usr/libexec/ld.so; then
+      hardcode_direct_CXX=yes
+      hardcode_shlibpath_var_CXX=no
+      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+	export_dynamic_flag_spec_CXX='${wl}-E'
+	whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      fi
+      output_verbose_link_cmd='echo'
+    else
+      ld_shlibs_CXX=no
+    fi
+    ;;
   osf3*)
     case $cc_basename in
-      KCC)
+      KCC*)
 	# Kuck and Associates, Inc. (KAI) C++ Compiler
 
 	# KCC will only create a shared library if the output file
@@ -9295,14 +10199,14 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
 
 	;;
-      RCC)
+      RCC*)
 	# Rational C++ 2.4.1
 	# FIXME: insert proper C++ library support
 	ld_shlibs_CXX=no
 	;;
-      cxx)
+      cxx*)
 	allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
 
 	hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
 	hardcode_libdir_separator_CXX=:
@@ -9320,7 +10224,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       *)
 	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
 	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	  archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+	  archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 
 	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
 	  hardcode_libdir_separator_CXX=:
@@ -9339,7 +10243,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     ;;
   osf4* | osf5*)
     case $cc_basename in
-      KCC)
+      KCC*)
 	# Kuck and Associates, Inc. (KAI) C++ Compiler
 
 	# KCC will only create a shared library if the output file
@@ -9354,17 +10258,17 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	# the KAI C++ compiler.
 	old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
 	;;
-      RCC)
+      RCC*)
 	# Rational C++ 2.4.1
 	# FIXME: insert proper C++ library support
 	ld_shlibs_CXX=no
 	;;
-      cxx)
+      cxx*)
 	allow_undefined_flag_CXX=' -expect_unresolved \*'
-	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
 	archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
 	  echo "-hidden">> $lib.exp~
-	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry $objdir/so_locations -o $lib~
+	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
 	  $rm $lib.exp'
 
 	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
@@ -9383,7 +10287,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       *)
 	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
 	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	 archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+	 archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 
 	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
 	  hardcode_libdir_separator_CXX=:
@@ -9404,27 +10308,14 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     # FIXME: insert proper C++ library support
     ld_shlibs_CXX=no
     ;;
-  sco*)
-    archive_cmds_need_lc_CXX=no
-    case $cc_basename in
-      CC)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
   sunos4*)
     case $cc_basename in
-      CC)
+      CC*)
 	# Sun C++ 4.x
 	# FIXME: insert proper C++ library support
 	ld_shlibs_CXX=no
 	;;
-      lcc)
+      lcc*)
 	# Lucid
 	# FIXME: insert proper C++ library support
 	ld_shlibs_CXX=no
@@ -9437,36 +10328,28 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     ;;
   solaris*)
     case $cc_basename in
-      CC)
+      CC*)
 	# Sun C++ 4.2, 5.x and Centerline C++
+        archive_cmds_need_lc_CXX=yes
 	no_undefined_flag_CXX=' -zdefs'
-	archive_cmds_CXX='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	archive_cmds_CXX='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	$CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
 
 	hardcode_libdir_flag_spec_CXX='-R$libdir'
 	hardcode_shlibpath_var_CXX=no
 	case $host_os in
-	  solaris2.0-5 | solaris2.0-5.*) ;;
+	  solaris2.[0-5] | solaris2.[0-5].*) ;;
 	  *)
-	    # The C++ compiler is used as linker so we must use $wl
-	    # flag to pass the commands to the underlying system
-	    # linker.
+	    # The compiler driver will combine and reorder linker options,
+	    # but understands `-z linker_flag'.
 	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-	    whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	    whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
 	    ;;
 	esac
 	link_all_deplibs_CXX=yes
 
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[LR]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	output_verbose_link_cmd='echo'
 
 	# Archives containing C++ object files must be created using
 	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
@@ -9474,7 +10357,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	# in the archive.
 	old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
 	;;
-      gcx)
+      gcx*)
 	# Green Hills C++ Compiler
 	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
 
@@ -9508,16 +10391,73 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	  fi
 
 	  hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
+	  case $host_os in
+	  solaris2.[0-5] | solaris2.[0-5].*) ;;
+	  *)
+	    whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	    ;;
+	  esac
 	fi
 	;;
     esac
     ;;
-  sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
+  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+    no_undefined_flag_CXX='${wl}-z,text'
     archive_cmds_need_lc_CXX=no
+    hardcode_shlibpath_var_CXX=no
+    runpath_var='LD_RUN_PATH'
+
+    case $cc_basename in
+      CC*)
+	archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      *)
+	archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+    esac
+    ;;
+  sysv5* | sco3.2v5* | sco5v6*)
+    # Note: We can NOT use -z defs as we might desire, because we do not
+    # link with -lc, and that would cause any symbols used from libc to
+    # always be unresolved, which means just about no library would
+    # ever link correctly.  If we're not using GNU ld we use -z text
+    # though, which does catch some bad symbols but isn't as heavy-handed
+    # as -z defs.
+    # For security reasons, it is highly recommended that you always
+    # use absolute paths for naming shared libraries, and exclude the
+    # DT_RUNPATH tag from executables and libraries.  But doing so
+    # requires that you compile everything twice, which is a pain.
+    # So that behaviour is only enabled if SCOABSPATH is set to a
+    # non-empty value in the environment.  Most likely only useful for
+    # creating official distributions of packages.
+    # This is a hack until libtool officially supports absolute path
+    # names for shared libraries.
+    no_undefined_flag_CXX='${wl}-z,text'
+    allow_undefined_flag_CXX='${wl}-z,nodefs'
+    archive_cmds_need_lc_CXX=no
+    hardcode_shlibpath_var_CXX=no
+    hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+    hardcode_libdir_separator_CXX=':'
+    link_all_deplibs_CXX=yes
+    export_dynamic_flag_spec_CXX='${wl}-Bexport'
+    runpath_var='LD_RUN_PATH'
+
+    case $cc_basename in
+      CC*)
+	archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      *)
+	archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+    esac
     ;;
   tandem*)
     case $cc_basename in
-      NCC)
+      NCC*)
 	# NonStop-UX NCC 3.20
 	# FIXME: insert proper C++ library support
 	ld_shlibs_CXX=no
@@ -9574,7 +10514,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   # The `*' in the case matches for architectures that use `case' in
   # $output_verbose_cmd can trigger glob expansion during the loop
   # eval without this substitution.
-  output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
+  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
 
   for p in `eval $output_verbose_link_cmd`; do
     case $p in
@@ -9650,6 +10590,62 @@ fi
 
 $rm -f confest.$objext
 
+# PORTME: override above test on systems where it is broken
+case $host_os in
+interix[3-9]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  predep_objects_CXX=
+  postdep_objects_CXX=
+  postdeps_CXX=
+  ;;
+
+linux*)
+  case `$CC -V 2>&1 | sed 5q` in
+  *Sun\ C*)
+    # Sun C++ 5.9
+    #
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+    if test "$solaris_use_stlport4" != yes; then
+      postdeps_CXX='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC*)
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    if test "$solaris_use_stlport4" != yes; then
+      postdeps_CXX='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+esac
+
+
 case " $postdeps_CXX " in
 *" -lc "*) archive_cmds_need_lc_CXX=no ;;
 esac
@@ -9680,12 +10676,14 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       # like `-m68040'.
       lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
       ;;
-    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
       # PIC is the default for these OSes.
       ;;
-    mingw* | os2* | pw32*)
+    mingw* | cygwin* | os2* | pw32*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
       lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
       ;;
     darwin* | rhapsody*)
@@ -9697,6 +10695,10 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       # DJGPP does not support shared libraries at all
       lt_prog_compiler_pic_CXX=
       ;;
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
     sysv4*MP*)
       if test -d /usr/nec; then
 	lt_prog_compiler_pic_CXX=-Kconform_pic
@@ -9705,7 +10707,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
     hpux*)
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
-      case "$host_cpu" in
+      case $host_cpu in
       hppa*64*|ia64*)
 	;;
       *)
@@ -9730,18 +10732,28 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	;;
       chorus*)
 	case $cc_basename in
-	cxch68)
+	cxch68*)
 	  # Green Hills C++ Compiler
 	  # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
 	  ;;
 	esac
 	;;
+       darwin*)
+         # PIC is the default on this platform
+         # Common symbols not allowed in MH_DYLIB files
+         case $cc_basename in
+           xlc*)
+           lt_prog_compiler_pic_CXX='-qnocommon'
+           lt_prog_compiler_wl_CXX='-Wl,'
+           ;;
+         esac
+       ;;
       dgux*)
 	case $cc_basename in
-	  ec++)
+	  ec++*)
 	    lt_prog_compiler_pic_CXX='-KPIC'
 	    ;;
-	  ghcx)
+	  ghcx*)
 	    # Green Hills C++ Compiler
 	    lt_prog_compiler_pic_CXX='-pic'
 	    ;;
@@ -9749,22 +10761,22 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	    ;;
 	esac
 	;;
-      freebsd*)
+      freebsd* | dragonfly*)
 	# FreeBSD uses GNU C++
 	;;
       hpux9* | hpux10* | hpux11*)
 	case $cc_basename in
-	  CC)
+	  CC*)
 	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
+	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
 	    if test "$host_cpu" != ia64; then
 	      lt_prog_compiler_pic_CXX='+Z'
 	    fi
 	    ;;
-	  aCC)
+	  aCC*)
 	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-	    case "$host_cpu" in
+	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+	    case $host_cpu in
 	    hppa*64*|ia64*)
 	      # +Z the default
 	      ;;
@@ -9777,9 +10789,13 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	    ;;
 	esac
 	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
       irix5* | irix6* | nonstopux*)
 	case $cc_basename in
-	  CC)
+	  CC*)
 	    lt_prog_compiler_wl_CXX='-Wl,'
 	    lt_prog_compiler_static_CXX='-non_shared'
 	    # CC pic flag -KPIC is the default.
@@ -9788,20 +10804,26 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	    ;;
 	esac
 	;;
-      linux*)
+      linux* | k*bsd*-gnu)
 	case $cc_basename in
-	  KCC)
+	  KCC*)
 	    # KAI C++ Compiler
 	    lt_prog_compiler_wl_CXX='--backend -Wl,'
 	    lt_prog_compiler_pic_CXX='-fPIC'
 	    ;;
-	  icpc)
+	  icpc* | ecpc*)
 	    # Intel C++
 	    lt_prog_compiler_wl_CXX='-Wl,'
 	    lt_prog_compiler_pic_CXX='-KPIC'
 	    lt_prog_compiler_static_CXX='-static'
 	    ;;
-	  cxx)
+	  pgCC*)
+	    # Portland Group C++ compiler.
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-fpic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  cxx*)
 	    # Compaq C++
 	    # Make sure the PIC flag is empty.  It appears that all Alpha
 	    # Linux and Compaq Tru64 Unix objects are PIC.
@@ -9809,6 +10831,14 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	    lt_prog_compiler_static_CXX='-non_shared'
 	    ;;
 	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      lt_prog_compiler_pic_CXX='-KPIC'
+	      lt_prog_compiler_static_CXX='-Bstatic'
+	      lt_prog_compiler_wl_CXX='-Qoption ld '
+	      ;;
+	    esac
 	    ;;
 	esac
 	;;
@@ -9818,7 +10848,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	;;
       mvs*)
 	case $cc_basename in
-	  cxx)
+	  cxx*)
 	    lt_prog_compiler_pic_CXX='-W c,exportall'
 	    ;;
 	  *)
@@ -9829,14 +10859,14 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	;;
       osf3* | osf4* | osf5*)
 	case $cc_basename in
-	  KCC)
+	  KCC*)
 	    lt_prog_compiler_wl_CXX='--backend -Wl,'
 	    ;;
-	  RCC)
+	  RCC*)
 	    # Rational C++ 2.4.1
 	    lt_prog_compiler_pic_CXX='-pic'
 	    ;;
-	  cxx)
+	  cxx*)
 	    # Digital/Compaq C++
 	    lt_prog_compiler_wl_CXX='-Wl,'
 	    # Make sure the PIC flag is empty.  It appears that all Alpha
@@ -9850,24 +10880,15 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	;;
       psos*)
 	;;
-      sco*)
-	case $cc_basename in
-	  CC)
-	    lt_prog_compiler_pic_CXX='-fPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
       solaris*)
 	case $cc_basename in
-	  CC)
+	  CC*)
 	    # Sun C++ 4.2, 5.x and Centerline C++
 	    lt_prog_compiler_pic_CXX='-KPIC'
 	    lt_prog_compiler_static_CXX='-Bstatic'
 	    lt_prog_compiler_wl_CXX='-Qoption ld '
 	    ;;
-	  gcx)
+	  gcx*)
 	    # Green Hills C++ Compiler
 	    lt_prog_compiler_pic_CXX='-PIC'
 	    ;;
@@ -9877,12 +10898,12 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	;;
       sunos4*)
 	case $cc_basename in
-	  CC)
+	  CC*)
 	    # Sun C++ 4.x
 	    lt_prog_compiler_pic_CXX='-pic'
 	    lt_prog_compiler_static_CXX='-Bstatic'
 	    ;;
-	  lcc)
+	  lcc*)
 	    # Lucid
 	    lt_prog_compiler_pic_CXX='-pic'
 	    ;;
@@ -9892,7 +10913,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	;;
       tandem*)
 	case $cc_basename in
-	  NCC)
+	  NCC*)
 	    # NonStop-UX NCC 3.20
 	    lt_prog_compiler_pic_CXX='-KPIC'
 	    ;;
@@ -9900,7 +10921,14 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	    ;;
 	esac
 	;;
-      unixware*)
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	esac
 	;;
       vxworks*)
 	;;
@@ -9917,14 +10945,15 @@ echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6
 # Check to make sure the PIC flag actually works.
 #
 if test -n "$lt_prog_compiler_pic_CXX"; then
-  echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
+
+echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
 echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6
 if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   lt_prog_compiler_pic_works_CXX=no
   ac_outfile=conftest.$ac_objext
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
@@ -9932,18 +10961,20 @@ else
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    # The option is referenced via a variable to avoid confusing sed.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:9938: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:10967: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:9942: \$? = $ac_status" >&5
+   echo "$as_me:10971: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test ! -s conftest.err; then
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_prog_compiler_pic_works_CXX=yes
      fi
    fi
@@ -9964,7 +10995,7 @@ else
 fi
 
 fi
-case "$host_os" in
+case $host_os in
   # For platforms which do not support PIC, -DPIC is meaningless:
   *djgpp*)
     lt_prog_compiler_pic_CXX=
@@ -9974,6 +11005,48 @@ case "$host_os" in
     ;;
 esac
 
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+if test "${lt_prog_compiler_static_works_CXX+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_static_works_CXX=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_prog_compiler_static_works_CXX=yes
+       fi
+     else
+       lt_prog_compiler_static_works_CXX=yes
+     fi
+   fi
+   $rm conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6
+
+if test x"$lt_prog_compiler_static_works_CXX" = xyes; then
+    :
+else
+    lt_prog_compiler_static_CXX=
+fi
+
+
 echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
 echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
 if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
@@ -9984,14 +11057,7 @@ else
    mkdir conftest
    cd conftest
    mkdir out
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-   # that will create temporary files in the current directory regardless of
-   # the output directory.  Thus, making CWD read-only will cause this test
-   # to fail, enabling locking or at least warning the user not to do parallel
-   # builds.
-   chmod -w .
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
    lt_compiler_flag="-o out/conftest2.$ac_objext"
    # Insert the option either (1) after the last *FLAGS variable, or
@@ -9999,25 +11065,30 @@ else
    # Note that $ac_compile itself does not contain backslashes and begins
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:10005: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:11071: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:10009: \$? = $ac_status" >&5
+   echo "$as_me:11075: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     if test ! -s out/conftest.err; then
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_c_o_CXX=yes
      fi
    fi
-   chmod u+w .
-   $rm conftest* out/*
-   rmdir out
+   chmod u+w . 2>&5
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
    cd ..
    rmdir conftest
    $rm conftest*
@@ -10067,7 +11138,7 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
     export_symbols_cmds_CXX="$ltdll_cmds"
   ;;
   cygwin* | mingw*)
-    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
   ;;
   *)
     export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
@@ -10078,11 +11149,6 @@ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
 echo "${ECHO_T}$ld_shlibs_CXX" >&6
 test "$ld_shlibs_CXX" = no && can_build_shared=no
 
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
 #
 # Do we need to explicitly link libc?
 #
@@ -10103,7 +11169,7 @@ x|xyes)
       echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
 echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
       $rm conftest*
-      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
       if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
@@ -10115,6 +11181,7 @@ echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&
         libobjs=conftest.$ac_objext
         deplibs=
         wl=$lt_prog_compiler_wl_CXX
+	pic_flag=$lt_prog_compiler_pic_CXX
         compiler_flags=-v
         linker_flags=-v
         verstring=
@@ -10145,78 +11212,12 @@ echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6
   ;;
 esac
 
-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
-hardcode_action_CXX=
-if test -n "$hardcode_libdir_flag_spec_CXX" || \
-   test -n "$runpath_var CXX" || \
-   test "X$hardcode_automatic_CXX"="Xyes" ; then
-
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct_CXX" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
-     test "$hardcode_minus_L_CXX" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action_CXX=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action_CXX=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action_CXX=unsupported
-fi
-echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
-echo "${ECHO_T}$hardcode_action_CXX" >&6
-
-if test "$hardcode_action_CXX" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-striplib=
-old_striplib=
-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-   darwin*)
-       if test -n "$STRIP" ; then
-         striplib="$STRIP -x"
-         echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-       else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-       ;;
-   *)
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-    ;;
-  esac
-fi
-
 echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
 echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
-shrext=".so"
+shrext_cmds=".so"
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
@@ -10226,20 +11227,7 @@ shlibpath_overrides_runpath=unknown
 version_type=none
 dynamic_linker="$host_os ld.so"
 sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
-  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
-else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
+
 need_lib_prefix=unknown
 hardcode_into_libs=no
 
@@ -10304,7 +11292,7 @@ aix4* | aix5*)
 amigaos*)
   library_names_spec='$libname.ixlibrary $libname.a'
   # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
   ;;
 
 beos*)
@@ -10313,7 +11301,7 @@ beos*)
   shlibpath_var=LIBRARY_PATH
   ;;
 
-bsdi4*)
+bsdi[45]*)
   version_type=linux
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -10329,7 +11317,7 @@ bsdi4*)
 
 cygwin* | mingw* | pw32*)
   version_type=windows
-  shrext=".dll"
+  shrext_cmds=".dll"
   need_version=no
   need_lib_prefix=no
 
@@ -10341,7 +11329,8 @@ cygwin* | mingw* | pw32*)
       dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname'
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
     postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
       dlpath=$dir/\$dldll~
        $rm \$dlpath'
@@ -10351,7 +11340,7 @@ cygwin* | mingw* | pw32*)
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
       ;;
     mingw*)
       # MinGW DLLs use traditional 'lib' prefix
@@ -10371,7 +11360,7 @@ cygwin* | mingw* | pw32*)
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
       ;;
     esac
     ;;
@@ -10390,18 +11379,12 @@ darwin* | rhapsody*)
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  # FIXME: Relying on posixy $() will cause problems for
-  #        cross-compilation, but unfortunately the echo tests do not
-  #        yet detect zsh echo's removal of \ escapes.
   library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
-  shrext='$(test .$module = .yes && echo .so || echo .dylib)'
-  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-  if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-  sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-  fi
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
   sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
   ;;
 
@@ -10418,8 +11401,17 @@ freebsd1*)
   dynamic_linker=no
   ;;
 
-freebsd*)
-  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
@@ -10437,14 +11429,19 @@ freebsd*)
   freebsd2*)
     shlibpath_overrides_runpath=yes
     ;;
-  freebsd3.01* | freebsdelf3.01*)
+  freebsd3.[01]* | freebsdelf3.[01]*)
     shlibpath_overrides_runpath=yes
     hardcode_into_libs=yes
     ;;
-  *) # from 3.2 on
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
     shlibpath_overrides_runpath=no
     hardcode_into_libs=yes
     ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
   esac
   ;;
 
@@ -10464,9 +11461,9 @@ hpux9* | hpux10* | hpux11*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
-  case "$host_cpu" in
+  case $host_cpu in
   ia64*)
-    shrext='.so'
+    shrext_cmds='.so'
     hardcode_into_libs=yes
     dynamic_linker="$host_os dld.so"
     shlibpath_var=LD_LIBRARY_PATH
@@ -10481,7 +11478,7 @@ hpux9* | hpux10* | hpux11*)
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
    hppa*64*)
-     shrext='.sl'
+     shrext_cmds='.sl'
      hardcode_into_libs=yes
      dynamic_linker="$host_os dld.sl"
      shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
@@ -10492,7 +11489,7 @@ hpux9* | hpux10* | hpux11*)
      sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
      ;;
    *)
-    shrext='.sl'
+    shrext_cmds='.sl'
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
@@ -10504,6 +11501,18 @@ hpux9* | hpux10* | hpux11*)
   postinstall_cmds='chmod 555 $lib'
   ;;
 
+interix[3-9]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
 irix5* | irix6* | nonstopux*)
   case $host_os in
     nonstopux*) version_type=nonstopux ;;
@@ -10547,7 +11556,7 @@ linux*oldld* | linux*aout* | linux*coff*)
   ;;
 
 # This must be Linux ELF.
-linux*)
+linux* | k*bsd*-gnu)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -10561,6 +11570,12 @@ linux*)
   # before this can be enabled.
   hardcode_into_libs=yes
 
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
   # We used to test for /lib/ld.so.1 and disable shared libraries on
   # powerpc, because MkLinux only supported shared libraries with the
   # GNU dynamic linker.  Since this was broken with cross compilers,
@@ -10579,7 +11594,7 @@ netbsd*)
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
   else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
     soname_spec='${libname}${release}${shared_ext}$major'
     dynamic_linker='NetBSD ld.elf_so'
   fi
@@ -10595,7 +11610,7 @@ newsos6)
   shlibpath_overrides_runpath=yes
   ;;
 
-nto-qnx)
+nto-qnx*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -10607,8 +11622,13 @@ nto-qnx)
 
 openbsd*)
   version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
   need_lib_prefix=no
-  need_version=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
@@ -10628,7 +11648,7 @@ openbsd*)
 
 os2*)
   libname_spec='$name'
-  shrext=".dll"
+  shrext_cmds=".dll"
   need_lib_prefix=no
   library_names_spec='$libname${shared_ext} $libname.a'
   dynamic_linker='OS/2 ld.exe'
@@ -10646,11 +11666,8 @@ osf3* | osf4* | osf5*)
   sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
   ;;
 
-sco3.2v5*)
-  version_type=osf
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
+rdos*)
+  dynamic_linker=no
   ;;
 
 solaris*)
@@ -10678,7 +11695,7 @@ sunos4*)
   need_version=yes
   ;;
 
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+sysv4 | sysv4.3*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
@@ -10711,6 +11728,29 @@ sysv4*MP*)
   fi
   ;;
 
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
 uts4*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -10726,724 +11766,46 @@ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
 echo "${ECHO_T}$dynamic_linker" >&6
 test "$dynamic_linker" = no && can_build_shared=no
 
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  mingw* | pw32*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-   ;;
-
-  cygwin*)
-    lt_cv_dlopen="dlopen"
-    lt_cv_dlopen_libs=
-   ;;
-
-  darwin*)
-  # if libdl is installed we need to link against it
-    echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dl_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dl_dlopen=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
-if test $ac_cv_lib_dl_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-
-    lt_cv_dlopen="dyld"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
 
-   ;;
+echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+hardcode_action_CXX=
+if test -n "$hardcode_libdir_flag_spec_CXX" || \
+   test -n "$runpath_var_CXX" || \
+   test "X$hardcode_automatic_CXX" = "Xyes" ; then
 
-  *)
-    echo "$as_me:$LINENO: checking for shl_load" >&5
-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
-if test "${ac_cv_func_shl_load+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char shl_load (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char shl_load ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_shl_load) || defined (__stub___shl_load)
-choke me
-#else
-char (*f) () = shl_load;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != shl_load;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_shl_load=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_shl_load=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-echo "${ECHO_T}$ac_cv_func_shl_load" >&6
-if test $ac_cv_func_shl_load = yes; then
-  lt_cv_dlopen="shl_load"
-else
-  echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char shl_load ();
-int
-main ()
-{
-shl_load ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dld_shl_load=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dld_shl_load=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
-if test $ac_cv_lib_dld_shl_load = yes; then
-  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
-else
-  echo "$as_me:$LINENO: checking for dlopen" >&5
-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
-if test "${ac_cv_func_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char dlopen (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_dlopen) || defined (__stub___dlopen)
-choke me
-#else
-char (*f) () = dlopen;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != dlopen;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_dlopen=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-echo "${ECHO_T}$ac_cv_func_dlopen" >&6
-if test $ac_cv_func_dlopen = yes; then
-  lt_cv_dlopen="dlopen"
-else
-  echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dl_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dl_dlopen=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
-if test $ac_cv_lib_dl_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-  echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsvld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_svld_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_svld_dlopen=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
-if test $ac_cv_lib_svld_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-else
-  echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dld_link ();
-int
-main ()
-{
-dld_link ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dld_dld_link=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dld_dld_link=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
-if test $ac_cv_lib_dld_dld_link = yes; then
-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct_CXX" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
+     test "$hardcode_minus_L_CXX" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_CXX=relink
   else
-    enable_dlopen=no
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_CXX=immediate
   fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
-if test "${lt_cv_dlopen_self+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 11248 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-
-    exit (status);
-}
-EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self=no
-  fi
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_CXX=unsupported
 fi
-rm -fr conftest*
+echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
+echo "${ECHO_T}$hardcode_action_CXX" >&6
 
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self" >&6
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      LDFLAGS="$LDFLAGS $link_static_flag"
-      echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
-if test "${lt_cv_dlopen_self_static+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self_static=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 11346 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-
-    exit (status);
-}
-EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self_static=no
-  fi
-fi
-rm -fr conftest*
-
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
+if test "$hardcode_action_CXX" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
 fi
 
 
@@ -11460,7 +11822,8 @@ if test -f "$ltmain"; then
   # Now quote all the things that may contain metacharacters while being
   # careful not to overquote the AC_SUBSTed values.  We take copies of the
   # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
     libname_spec library_names_spec soname_spec extract_expsyms_cmds \
     old_striplib striplib file_magic_cmd finish_cmds finish_eval \
     deplibs_check_method reload_flag reload_cmds need_locks \
@@ -11501,6 +11864,7 @@ if test -f "$ltmain"; then
     module_cmds_CXX \
     module_expsym_cmds_CXX \
     lt_cv_prog_compiler_c_o_CXX \
+    fix_srcfile_path_CXX \
     exclude_expsyms_CXX \
     include_expsyms_CXX; do
 
@@ -11560,6 +11924,12 @@ fast_install=$enable_fast_install
 # The host system.
 host_alias=$host_alias
 host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
 
 # An echo program that does not interpret backslashes.
 echo=$lt_echo
@@ -11571,6 +11941,9 @@ AR_FLAGS=$lt_AR_FLAGS
 # A C compiler.
 LTCC=$lt_LTCC
 
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
 # A language-specific compiler.
 CC=$lt_compiler_CXX
 
@@ -11590,7 +11963,7 @@ LN_S=$lt_LN_S
 NM=$lt_NM
 
 # A symbol stripping program
-STRIP=$STRIP
+STRIP=$lt_STRIP
 
 # Used to examine libraries when file_magic_cmd begins "file"
 MAGIC_CMD=$MAGIC_CMD
@@ -11621,7 +11994,7 @@ objext="$ac_objext"
 libext="$libext"
 
 # Shared library suffix (normally ".so").
-shrext='$shrext'
+shrext_cmds='$shrext_cmds'
 
 # Executable file suffix (normally "").
 exeext="$exeext"
@@ -11636,7 +12009,7 @@ max_cmd_len=$lt_cv_sys_max_cmd_len
 # Does compiler simultaneously support -c and -o options?
 compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
 
-# Must we lock files when doing compilation ?
+# Must we lock files when doing compilation?
 need_locks=$lt_need_locks
 
 # Do we need the lib prefix for modules?
@@ -11812,7 +12185,7 @@ sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
 # Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_CXX"
+fix_srcfile_path=$lt_fix_srcfile_path
 
 # Set to yes if exported symbols are required.
 always_export_symbols=$always_export_symbols_CXX
@@ -11838,7 +12211,10 @@ else
   # If there is no Makefile yet, we rely on a make rule to execute
   # `config.status --recheck' to rerun these tests and create the
   # libtool script then.
-  test -f Makefile && make "$ltmain"
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
 fi
 
 
@@ -11900,26 +12276,59 @@ objext=o
 objext_F77=$objext
 
 # Code to be used in simple compile tests
-lt_simple_compile_test_code="      subroutine t\n      return\n      end\n"
+lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
 
 # Code to be used in simple link tests
-lt_simple_link_test_code="      program t\n      end\n"
+lt_simple_link_test_code="\
+      program t
+      end
+"
 
 # ltmain only uses $CC for tagged configurations so make sure $CC is set.
 
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
 # Allow CC to be a program name with arguments.
 compiler=$CC
 
 
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
 # Allow CC to be a program name with arguments.
 lt_save_CC="$CC"
 CC=${F77-"f77"}
 compiler=$CC
 compiler_F77=$CC
-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
 
 echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
 echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
@@ -11932,7 +12341,7 @@ test "$can_build_shared" = "no" && enable_shared=no
 
 # On AIX, shared libraries and static libraries use the same namespace, and
 # are all built from PIC.
-case "$host_os" in
+case $host_os in
 aix3*)
   test "$enable_shared" = yes && enable_static=no
   if test -n "$RANLIB"; then
@@ -11940,8 +12349,10 @@ aix3*)
     postinstall_cmds='$RANLIB $lib'
   fi
   ;;
-aix4*)
-  test "$enable_shared" = yes && enable_static=no
+aix4* | aix5*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
   ;;
 esac
 echo "$as_me:$LINENO: result: $enable_shared" >&5
@@ -11954,8 +12365,6 @@ test "$enable_shared" = yes || enable_static=yes
 echo "$as_me:$LINENO: result: $enable_static" >&5
 echo "${ECHO_T}$enable_static" >&6
 
-test "$ld_shlibs_F77" = no && can_build_shared=no
-
 GCC_F77="$G77"
 LD_F77="$LD"
 
@@ -11986,13 +12395,15 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
       ;;
 
-    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
       # PIC is the default for these OSes.
       ;;
 
-    mingw* | pw32* | os2*)
+    mingw* | cygwin* | pw32* | os2*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
       lt_prog_compiler_pic_F77='-DDLL_EXPORT'
       ;;
 
@@ -12002,6 +12413,11 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_pic_F77='-fno-common'
       ;;
 
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
     msdosdjgpp*)
       # Just because we use GCC doesn't mean we suddenly get shared libraries
       # on systems that don't support them.
@@ -12018,7 +12434,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
     hpux*)
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
-      case "$host_cpu" in
+      case $host_cpu in
       hppa*64*|ia64*)
 	# +Z the default
 	;;
@@ -12044,8 +12460,18 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
       fi
       ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case $cc_basename in
+         xlc*)
+         lt_prog_compiler_pic_F77='-qnocommon'
+         lt_prog_compiler_wl_F77='-Wl,'
+         ;;
+       esac
+       ;;
 
-    mingw* | pw32* | os2*)
+    mingw* | cygwin* | pw32* | os2*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       lt_prog_compiler_pic_F77='-DDLL_EXPORT'
@@ -12055,7 +12481,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_wl_F77='-Wl,'
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
-      case "$host_cpu" in
+      case $host_cpu in
       hppa*64*|ia64*)
 	# +Z the default
 	;;
@@ -12078,18 +12504,41 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_static_F77='-Bstatic'
       ;;
 
-    linux*)
-      case $CC in
-      icc|ecc)
+    linux* | k*bsd*-gnu)
+      case $cc_basename in
+      icc* | ecc*)
 	lt_prog_compiler_wl_F77='-Wl,'
 	lt_prog_compiler_pic_F77='-KPIC'
 	lt_prog_compiler_static_F77='-static'
         ;;
-      ccc)
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl_F77='-Wl,'
+	lt_prog_compiler_pic_F77='-fpic'
+	lt_prog_compiler_static_F77='-Bstatic'
+        ;;
+      ccc*)
         lt_prog_compiler_wl_F77='-Wl,'
         # All Alpha code is PIC.
         lt_prog_compiler_static_F77='-non_shared'
         ;;
+      *)
+        case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic_F77='-KPIC'
+	  lt_prog_compiler_static_F77='-Bstatic'
+	  lt_prog_compiler_wl_F77='-Wl,'
+	  ;;
+	*Sun\ F*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic_F77='-KPIC'
+	  lt_prog_compiler_static_F77='-Bstatic'
+	  lt_prog_compiler_wl_F77=''
+	  ;;
+	esac
+	;;
       esac
       ;;
 
@@ -12099,15 +12548,19 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_static_F77='-non_shared'
       ;;
 
-    sco3.2v5*)
-      lt_prog_compiler_pic_F77='-Kpic'
-      lt_prog_compiler_static_F77='-dn'
+    rdos*)
+      lt_prog_compiler_static_F77='-non_shared'
       ;;
 
     solaris*)
-      lt_prog_compiler_wl_F77='-Wl,'
       lt_prog_compiler_pic_F77='-KPIC'
       lt_prog_compiler_static_F77='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	lt_prog_compiler_wl_F77='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl_F77='-Wl,';;
+      esac
       ;;
 
     sunos4*)
@@ -12116,7 +12569,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_static_F77='-Bstatic'
       ;;
 
-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+    sysv4 | sysv4.2uw2* | sysv4.3*)
       lt_prog_compiler_wl_F77='-Wl,'
       lt_prog_compiler_pic_F77='-KPIC'
       lt_prog_compiler_static_F77='-Bstatic'
@@ -12129,6 +12582,17 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       fi
       ;;
 
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      lt_prog_compiler_can_build_shared_F77=no
+      ;;
+
     uts4*)
       lt_prog_compiler_pic_F77='-pic'
       lt_prog_compiler_static_F77='-Bstatic'
@@ -12147,14 +12611,15 @@ echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6
 # Check to make sure the PIC flag actually works.
 #
 if test -n "$lt_prog_compiler_pic_F77"; then
-  echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
+
+echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
 echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6
 if test "${lt_prog_compiler_pic_works_F77+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   lt_prog_compiler_pic_works_F77=no
   ac_outfile=conftest.$ac_objext
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="$lt_prog_compiler_pic_F77"
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
@@ -12162,18 +12627,20 @@ else
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    # The option is referenced via a variable to avoid confusing sed.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:12168: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:12633: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:12172: \$? = $ac_status" >&5
+   echo "$as_me:12637: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test ! -s conftest.err; then
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_prog_compiler_pic_works_F77=yes
      fi
    fi
@@ -12194,7 +12661,7 @@ else
 fi
 
 fi
-case "$host_os" in
+case $host_os in
   # For platforms which do not support PIC, -DPIC is meaningless:
   *djgpp*)
     lt_prog_compiler_pic_F77=
@@ -12204,6 +12671,48 @@ case "$host_os" in
     ;;
 esac
 
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+if test "${lt_prog_compiler_static_works_F77+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_static_works_F77=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_prog_compiler_static_works_F77=yes
+       fi
+     else
+       lt_prog_compiler_static_works_F77=yes
+     fi
+   fi
+   $rm conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6
+
+if test x"$lt_prog_compiler_static_works_F77" = xyes; then
+    :
+else
+    lt_prog_compiler_static_F77=
+fi
+
+
 echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
 echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
 if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
@@ -12214,14 +12723,7 @@ else
    mkdir conftest
    cd conftest
    mkdir out
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-   # that will create temporary files in the current directory regardless of
-   # the output directory.  Thus, making CWD read-only will cause this test
-   # to fail, enabling locking or at least warning the user not to do parallel
-   # builds.
-   chmod -w .
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
    lt_compiler_flag="-o out/conftest2.$ac_objext"
    # Insert the option either (1) after the last *FLAGS variable, or
@@ -12229,25 +12731,30 @@ else
    # Note that $ac_compile itself does not contain backslashes and begins
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:12235: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:12737: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:12239: \$? = $ac_status" >&5
+   echo "$as_me:12741: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     if test ! -s out/conftest.err; then
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_c_o_F77=yes
      fi
    fi
-   chmod u+w .
-   $rm conftest* out/*
-   rmdir out
+   chmod u+w . 2>&5
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
    cd ..
    rmdir conftest
    $rm conftest*
@@ -12318,6 +12825,16 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
   # rely on this symbol name, it's probably fine to never include it in
   # preloaded symbol tables.
   extract_expsyms_cmds=
+  # Just being paranoid about ensuring that cc_basename is set.
+  for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
   case $host_os in
   cygwin* | mingw* | pw32*)
@@ -12328,6 +12845,10 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
       with_gnu_ld=no
     fi
     ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
   openbsd*)
     with_gnu_ld=no
     ;;
@@ -12338,6 +12859,27 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
     # If archive_cmds runs LD, not CC, wlarc should be empty
     wlarc='${wl}'
 
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec_F77='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+	whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	whole_archive_flag_spec_F77=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>/dev/null` in
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
     # See if GNU ld supports shared libraries.
     case $host_os in
     aix3* | aix4* | aix5*)
@@ -12388,10 +12930,10 @@ EOF
       allow_undefined_flag_F77=unsupported
       always_export_symbols_F77=no
       enable_shared_with_static_runtimes_F77=yes
-      export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+      export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
 
       if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+        archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 	# If the export-symbols file already is a .def file (1st line
 	# is EXPORTS), use it as is; otherwise, prepend...
 	archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
@@ -12400,9 +12942,64 @@ EOF
 	  echo EXPORTS > $output_objdir/$soname.def;
 	  cat $export_symbols >> $output_objdir/$soname.def;
 	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000  ${wl}--out-implib,$lib'
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
       else
-	ld_shlibs=no
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct_F77=no
+      hardcode_shlibpath_var_F77=no
+      hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec_F77='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | k*bsd*-gnu)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	tmp_addflag=
+	case $cc_basename,$host_cpu in
+	pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec_F77='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	*)
+	  tmp_sharedflag='-shared' ;;
+	esac
+	archive_cmds_F77='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+	if test $supports_anon_versioning = yes; then
+	  archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+  $echo "local: *; };" >> $output_objdir/$libname.ver~
+	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	fi
+      else
+	ld_shlibs_F77=no
       fi
       ;;
 
@@ -12416,7 +13013,7 @@ EOF
       fi
       ;;
 
-    solaris* | sysv5*)
+    solaris*)
       if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
 	ld_shlibs_F77=no
 	cat <<EOF 1>&2
@@ -12437,6 +13034,33 @@ EOF
       fi
       ;;
 
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs_F77=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+	    archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+	    archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  else
+	    ld_shlibs_F77=no
+	  fi
+	;;
+      esac
+      ;;
+
     sunos4*)
       archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
       wlarc=
@@ -12454,16 +13078,11 @@ EOF
       ;;
     esac
 
-    if test "$ld_shlibs_F77" = yes; then
-      runpath_var=LD_RUN_PATH
-      hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
-      export_dynamic_flag_spec_F77='${wl}--export-dynamic'
-      # ancient GNU ld didn't support --whole-archive et. al.
-      if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- 	whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	whole_archive_flag_spec_F77=
-      fi
+    if test "$ld_shlibs_F77" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec_F77=
+      export_dynamic_flag_spec_F77=
+      whole_archive_flag_spec_F77=
     fi
   else
     # PORTME fill in a description of your system's linker (not GNU ld)
@@ -12475,7 +13094,7 @@ EOF
       # Note: this linker hardcodes the directories in LIBPATH if there
       # are no directories specified by -L.
       hardcode_minus_L_F77=yes
-      if test "$GCC" = yes && test -z "$link_static_flag"; then
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
 	# Neither direct hardcoding nor static linking is supported with a
 	# broken collect2.
 	hardcode_direct_F77=unsupported
@@ -12509,6 +13128,7 @@ EOF
   	    break
   	  fi
 	  done
+	  ;;
 	esac
 
 	exp_sym_flag='-bexport'
@@ -12527,7 +13147,7 @@ EOF
       link_all_deplibs_F77=yes
 
       if test "$GCC" = yes; then
-	case $host_os in aix4.012|aix4.012.*)
+	case $host_os in aix4.[012]|aix4.[012].*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
 	  collect2name=`${CC} -print-prog-name=collect2`
@@ -12535,7 +13155,7 @@ EOF
   	   strings "$collect2name" | grep resolve_lib_name >/dev/null
 	  then
   	  # We have reworked collect2
-  	  hardcode_direct_F77=yes
+  	  :
 	  else
   	  # We have old collect2
   	  hardcode_direct_F77=unsupported
@@ -12546,8 +13166,12 @@ EOF
   	  hardcode_libdir_flag_spec_F77='-L$libdir'
   	  hardcode_libdir_separator_F77=
 	  fi
+	  ;;
 	esac
 	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
       else
 	# not using gcc
 	if test "$host_cpu" = ia64; then
@@ -12555,11 +13179,11 @@ EOF
   	# chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
 	else
-  	if test "$aix_use_runtimelinking" = yes; then
+	  if test "$aix_use_runtimelinking" = yes; then
 	    shared_flag='${wl}-G'
 	  else
 	    shared_flag='${wl}-bM:SRE'
-  	fi
+	  fi
 	fi
       fi
 
@@ -12578,37 +13202,55 @@ EOF
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+  (eval $ac_link) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
+	 { ac_try='test -z "$ac_f77_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
 
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 # Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
        hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+	archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
        else
 	if test "$host_cpu" = ia64; then
 	  hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
 	  allow_undefined_flag_F77="-z nodefs"
-	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
 	else
 	 # Determine the default libpath from the value encoded in an empty executable.
 	 cat >conftest.$ac_ext <<_ACEOF
@@ -12618,28 +13260,46 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+  (eval $ac_link) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
+	 { ac_try='test -z "$ac_f77_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
 
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 # Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
 	 hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
@@ -12647,13 +13307,11 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	  # -berok will link without error, but may produce a broken library.
 	  no_undefined_flag_F77=' ${wl}-bernotok'
 	  allow_undefined_flag_F77=' ${wl}-berok'
-	  # -bexpall does not export symbols beginning with underscore (_)
-	  always_export_symbols_F77=yes
 	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec_F77=' '
+	  whole_archive_flag_spec_F77='$convenience'
 	  archive_cmds_need_lc_F77=yes
-	  # This is similar to how AIX traditionally builds it's shared libraries.
-	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
 	fi
       fi
       ;;
@@ -12666,7 +13324,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ld_shlibs_F77=no
       ;;
 
-    bsdi4*)
+    bsdi[45]*)
       export_dynamic_flag_spec_F77=-rdynamic
       ;;
 
@@ -12680,55 +13338,64 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       # Tell ltmain to make .lib files, not .a files.
       libext=lib
       # Tell ltmain to make .dll files, not .so files.
-      shrext=".dll"
+      shrext_cmds=".dll"
       # FIXME: Setting linknames here is a bad hack.
       archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
       # The linker will automatically build a .lib file if we build a DLL.
       old_archive_From_new_cmds_F77='true'
       # FIXME: Should let the user specify the lib program.
-      old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path='`cygpath -w "$srcfile"`'
+      old_archive_cmds_F77='lib -OUT:$oldlib$oldobjs$old_deplibs'
+      fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
       enable_shared_with_static_runtimes_F77=yes
       ;;
 
     darwin* | rhapsody*)
-    if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-      archive_cmds_need_lc_F77=no
-      case "$host_os" in
-      rhapsody* | darwin1.[012])
-	allow_undefined_flag_F77='-undefined suppress'
-	;;
-      *) # Darwin 1.3 on
-	test -z ${LD_TWOLEVEL_NAMESPACE} && allow_undefined_flag_F77='-flat_namespace -undefined suppress'
-	;;
+      case $host_os in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
       esac
-      # FIXME: Relying on posixy $() will cause problems for
-      #        cross-compilation, but unfortunately the echo tests do not
-      #        yet detect zsh echo's removal of \ escapes.  Also zsh mangles
-      #	       `"' quotes if we put them in here... so don't!
-    	lt_int_apple_cc_single_mod=no
-    	output_verbose_link_cmd='echo'
-    	if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-    	  lt_int_apple_cc_single_mod=yes
-    	fi
-    	if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-    	  archive_cmds_F77='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-    	else
-        archive_cmds_F77='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      fi
-      module_cmds_F77='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-        if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-          archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        else
-          archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        fi
-          module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag  -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      archive_cmds_need_lc_F77=no
       hardcode_direct_F77=no
       hardcode_automatic_F77=yes
       hardcode_shlibpath_var_F77=unsupported
-      whole_archive_flag_spec_F77='-all_load $convenience'
+      whole_archive_flag_spec_F77=''
       link_all_deplibs_F77=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+      archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
+         module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+         archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs_F77=no
+          ;;
+      esac
     fi
       ;;
 
@@ -12762,7 +13429,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd*)
+    freebsd* | dragonfly*)
       archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
       hardcode_libdir_flag_spec_F77='-R$libdir'
       hardcode_direct_F77=yes
@@ -12785,47 +13452,62 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       export_dynamic_flag_spec_F77='${wl}-E'
       ;;
 
-    hpux10* | hpux11*)
+    hpux10*)
       if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case "$host_cpu" in
-	hppa*64*|ia64*)
+	archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_F77=:
+
+	hardcode_direct_F77=yes
+	export_dynamic_flag_spec_F77='${wl}-E'
+
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L_F77=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
 	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
+	ia64*)
+	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
 	*)
 	  archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
-	case "$host_cpu" in
-	hppa*64*|ia64*)
-	  archive_cmds_F77='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       fi
       if test "$with_gnu_ld" = no; then
-	case "$host_cpu" in
-	hppa*64*)
-	  hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-	  hardcode_libdir_flag_spec_ld_F77='+b $libdir'
-	  hardcode_libdir_separator_F77=:
-	  hardcode_direct_F77=no
-	  hardcode_shlibpath_var_F77=no
-	  ;;
-	ia64*)
-	  hardcode_libdir_flag_spec_F77='-L$libdir'
-	  hardcode_direct_F77=no
-	  hardcode_shlibpath_var_F77=no
+	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_F77=:
 
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  hardcode_minus_L_F77=yes
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_libdir_flag_spec_ld_F77='+b $libdir'
+	  hardcode_direct_F77=no
+	  hardcode_shlibpath_var_F77=no
 	  ;;
 	*)
-	  hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-	  hardcode_libdir_separator_F77=:
 	  hardcode_direct_F77=yes
 	  export_dynamic_flag_spec_F77='${wl}-E'
 
@@ -12869,23 +13551,28 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ;;
 
     openbsd*)
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec_F77='${wl}-E'
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct_F77=yes
+	hardcode_shlibpath_var_F77=no
+	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec_F77='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec_F77='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+        fi
       else
-       case $host_os in
-	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	   archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	   hardcode_libdir_flag_spec_F77='-R$libdir'
-	   ;;
-	 *)
-	   archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	   hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-	   ;;
-       esac
+	ld_shlibs_F77=no
       fi
       ;;
 
@@ -12918,7 +13605,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	allow_undefined_flag_F77=' -expect_unresolved \*'
 	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
 	archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	hardcode_libdir_flag_spec_F77='-rpath $libdir'
@@ -12926,21 +13613,15 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_libdir_separator_F77=:
       ;;
 
-    sco3.2v5*)
-      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var_F77=no
-      export_dynamic_flag_spec_F77='${wl}-Bexport'
-      runpath_var=LD_RUN_PATH
-      hardcode_runpath_var=yes
-      ;;
-
     solaris*)
       no_undefined_flag_F77=' -z text'
       if test "$GCC" = yes; then
+	wlarc='${wl}'
 	archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
 	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
       else
+	wlarc=''
 	archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
 	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
   	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
@@ -12949,8 +13630,17 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_shlibpath_var_F77=no
       case $host_os in
       solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-	whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract'
+	fi
+	;;
       esac
       link_all_deplibs_F77=yes
       ;;
@@ -13007,36 +13697,45 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       fi
       ;;
 
-    sysv4.2uw2*)
-      archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_F77=yes
-      hardcode_minus_L_F77=no
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag_F77='${wl}-z,text'
+      archive_cmds_need_lc_F77=no
       hardcode_shlibpath_var_F77=no
-      hardcode_runpath_var=yes
-      runpath_var=LD_RUN_PATH
-      ;;
+      runpath_var='LD_RUN_PATH'
 
-   sysv5OpenUNIX8* | sysv5UnixWare7* |  sysv5uw[78]* | unixware7*)
-      no_undefined_flag_F77='${wl}-z ${wl}text'
       if test "$GCC" = yes; then
-	archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	archive_cmds_F77='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var_F77=no
       ;;
 
-    sysv5*)
-      no_undefined_flag_F77=' -z text'
-      # $CC -shared without GNU ld will not create a library from C++
-      # object files and a static libstdc++, better avoid it by now
-      archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      hardcode_libdir_flag_spec_F77=
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag_F77='${wl}-z,text'
+      allow_undefined_flag_F77='${wl}-z,nodefs'
+      archive_cmds_need_lc_F77=no
       hardcode_shlibpath_var_F77=no
+      hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_separator_F77=':'
+      link_all_deplibs_F77=yes
+      export_dynamic_flag_spec_F77='${wl}-Bexport'
       runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
       ;;
 
     uts4*)
@@ -13055,11 +13754,6 @@ echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
 echo "${ECHO_T}$ld_shlibs_F77" >&6
 test "$ld_shlibs_F77" = no && can_build_shared=no
 
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
 #
 # Do we need to explicitly link libc?
 #
@@ -13080,7 +13774,7 @@ x|xyes)
       echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
 echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
       $rm conftest*
-      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
       if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
@@ -13092,6 +13786,7 @@ echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&
         libobjs=conftest.$ac_objext
         deplibs=
         wl=$lt_prog_compiler_wl_F77
+	pic_flag=$lt_prog_compiler_pic_F77
         compiler_flags=-v
         linker_flags=-v
         verstring=
@@ -13122,78 +13817,12 @@ echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6
   ;;
 esac
 
-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
-hardcode_action_F77=
-if test -n "$hardcode_libdir_flag_spec_F77" || \
-   test -n "$runpath_var F77" || \
-   test "X$hardcode_automatic_F77"="Xyes" ; then
-
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct_F77" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
-     test "$hardcode_minus_L_F77" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action_F77=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action_F77=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action_F77=unsupported
-fi
-echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
-echo "${ECHO_T}$hardcode_action_F77" >&6
-
-if test "$hardcode_action_F77" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-striplib=
-old_striplib=
-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-   darwin*)
-       if test -n "$STRIP" ; then
-         striplib="$STRIP -x"
-         echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-       else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-       ;;
-   *)
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-    ;;
-  esac
-fi
-
 echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
 echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
-shrext=".so"
+shrext_cmds=".so"
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
@@ -13203,20 +13832,7 @@ shlibpath_overrides_runpath=unknown
 version_type=none
 dynamic_linker="$host_os ld.so"
 sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
-  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
-else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
+
 need_lib_prefix=unknown
 hardcode_into_libs=no
 
@@ -13281,7 +13897,7 @@ aix4* | aix5*)
 amigaos*)
   library_names_spec='$libname.ixlibrary $libname.a'
   # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
   ;;
 
 beos*)
@@ -13290,7 +13906,7 @@ beos*)
   shlibpath_var=LIBRARY_PATH
   ;;
 
-bsdi4*)
+bsdi[45]*)
   version_type=linux
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -13306,7 +13922,7 @@ bsdi4*)
 
 cygwin* | mingw* | pw32*)
   version_type=windows
-  shrext=".dll"
+  shrext_cmds=".dll"
   need_version=no
   need_lib_prefix=no
 
@@ -13318,7 +13934,8 @@ cygwin* | mingw* | pw32*)
       dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname'
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
     postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
       dlpath=$dir/\$dldll~
        $rm \$dlpath'
@@ -13328,7 +13945,7 @@ cygwin* | mingw* | pw32*)
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
       ;;
     mingw*)
       # MinGW DLLs use traditional 'lib' prefix
@@ -13348,7 +13965,7 @@ cygwin* | mingw* | pw32*)
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
       ;;
     esac
     ;;
@@ -13367,18 +13984,12 @@ darwin* | rhapsody*)
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  # FIXME: Relying on posixy $() will cause problems for
-  #        cross-compilation, but unfortunately the echo tests do not
-  #        yet detect zsh echo's removal of \ escapes.
   library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
-  shrext='$(test .$module = .yes && echo .so || echo .dylib)'
-  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-  if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-  sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-  fi
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
   sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
   ;;
 
@@ -13395,8 +14006,17 @@ freebsd1*)
   dynamic_linker=no
   ;;
 
-freebsd*)
-  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
@@ -13414,14 +14034,19 @@ freebsd*)
   freebsd2*)
     shlibpath_overrides_runpath=yes
     ;;
-  freebsd3.01* | freebsdelf3.01*)
+  freebsd3.[01]* | freebsdelf3.[01]*)
     shlibpath_overrides_runpath=yes
     hardcode_into_libs=yes
     ;;
-  *) # from 3.2 on
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
     shlibpath_overrides_runpath=no
     hardcode_into_libs=yes
     ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
   esac
   ;;
 
@@ -13441,9 +14066,9 @@ hpux9* | hpux10* | hpux11*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
-  case "$host_cpu" in
+  case $host_cpu in
   ia64*)
-    shrext='.so'
+    shrext_cmds='.so'
     hardcode_into_libs=yes
     dynamic_linker="$host_os dld.so"
     shlibpath_var=LD_LIBRARY_PATH
@@ -13458,7 +14083,7 @@ hpux9* | hpux10* | hpux11*)
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
    hppa*64*)
-     shrext='.sl'
+     shrext_cmds='.sl'
      hardcode_into_libs=yes
      dynamic_linker="$host_os dld.sl"
      shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
@@ -13469,7 +14094,7 @@ hpux9* | hpux10* | hpux11*)
      sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
      ;;
    *)
-    shrext='.sl'
+    shrext_cmds='.sl'
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
@@ -13481,6 +14106,18 @@ hpux9* | hpux10* | hpux11*)
   postinstall_cmds='chmod 555 $lib'
   ;;
 
+interix[3-9]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
 irix5* | irix6* | nonstopux*)
   case $host_os in
     nonstopux*) version_type=nonstopux ;;
@@ -13524,7 +14161,7 @@ linux*oldld* | linux*aout* | linux*coff*)
   ;;
 
 # This must be Linux ELF.
-linux*)
+linux* | k*bsd*-gnu)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -13538,6 +14175,12 @@ linux*)
   # before this can be enabled.
   hardcode_into_libs=yes
 
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
   # We used to test for /lib/ld.so.1 and disable shared libraries on
   # powerpc, because MkLinux only supported shared libraries with the
   # GNU dynamic linker.  Since this was broken with cross compilers,
@@ -13556,7 +14199,7 @@ netbsd*)
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
   else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
     soname_spec='${libname}${release}${shared_ext}$major'
     dynamic_linker='NetBSD ld.elf_so'
   fi
@@ -13572,7 +14215,7 @@ newsos6)
   shlibpath_overrides_runpath=yes
   ;;
 
-nto-qnx)
+nto-qnx*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -13584,8 +14227,13 @@ nto-qnx)
 
 openbsd*)
   version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
   need_lib_prefix=no
-  need_version=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
@@ -13605,7 +14253,7 @@ openbsd*)
 
 os2*)
   libname_spec='$name'
-  shrext=".dll"
+  shrext_cmds=".dll"
   need_lib_prefix=no
   library_names_spec='$libname${shared_ext} $libname.a'
   dynamic_linker='OS/2 ld.exe'
@@ -13623,11 +14271,8 @@ osf3* | osf4* | osf5*)
   sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
   ;;
 
-sco3.2v5*)
-  version_type=osf
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
+rdos*)
+  dynamic_linker=no
   ;;
 
 solaris*)
@@ -13655,7 +14300,7 @@ sunos4*)
   need_version=yes
   ;;
 
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+sysv4 | sysv4.3*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
@@ -13688,6 +14333,29 @@ sysv4*MP*)
   fi
   ;;
 
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
 uts4*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -13703,6 +14371,48 @@ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
 echo "${ECHO_T}$dynamic_linker" >&6
 test "$dynamic_linker" = no && can_build_shared=no
 
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+hardcode_action_F77=
+if test -n "$hardcode_libdir_flag_spec_F77" || \
+   test -n "$runpath_var_F77" || \
+   test "X$hardcode_automatic_F77" = "Xyes" ; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct_F77" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
+     test "$hardcode_minus_L_F77" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_F77=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_F77=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_F77=unsupported
+fi
+echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
+echo "${ECHO_T}$hardcode_action_F77" >&6
+
+if test "$hardcode_action_F77" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
 
 # The else clause should only fire when bootstrapping the
 # libtool distribution, otherwise you forgot to ship ltmain.sh
@@ -13717,7 +14427,8 @@ if test -f "$ltmain"; then
   # Now quote all the things that may contain metacharacters while being
   # careful not to overquote the AC_SUBSTed values.  We take copies of the
   # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
     libname_spec library_names_spec soname_spec extract_expsyms_cmds \
     old_striplib striplib file_magic_cmd finish_cmds finish_eval \
     deplibs_check_method reload_flag reload_cmds need_locks \
@@ -13758,6 +14469,7 @@ if test -f "$ltmain"; then
     module_cmds_F77 \
     module_expsym_cmds_F77 \
     lt_cv_prog_compiler_c_o_F77 \
+    fix_srcfile_path_F77 \
     exclude_expsyms_F77 \
     include_expsyms_F77; do
 
@@ -13817,6 +14529,12 @@ fast_install=$enable_fast_install
 # The host system.
 host_alias=$host_alias
 host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
 
 # An echo program that does not interpret backslashes.
 echo=$lt_echo
@@ -13828,6 +14546,9 @@ AR_FLAGS=$lt_AR_FLAGS
 # A C compiler.
 LTCC=$lt_LTCC
 
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
 # A language-specific compiler.
 CC=$lt_compiler_F77
 
@@ -13847,7 +14568,7 @@ LN_S=$lt_LN_S
 NM=$lt_NM
 
 # A symbol stripping program
-STRIP=$STRIP
+STRIP=$lt_STRIP
 
 # Used to examine libraries when file_magic_cmd begins "file"
 MAGIC_CMD=$MAGIC_CMD
@@ -13878,7 +14599,7 @@ objext="$ac_objext"
 libext="$libext"
 
 # Shared library suffix (normally ".so").
-shrext='$shrext'
+shrext_cmds='$shrext_cmds'
 
 # Executable file suffix (normally "").
 exeext="$exeext"
@@ -13893,7 +14614,7 @@ max_cmd_len=$lt_cv_sys_max_cmd_len
 # Does compiler simultaneously support -c and -o options?
 compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
 
-# Must we lock files when doing compilation ?
+# Must we lock files when doing compilation?
 need_locks=$lt_need_locks
 
 # Do we need the lib prefix for modules?
@@ -14069,7 +14790,7 @@ sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
 # Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_F77"
+fix_srcfile_path=$lt_fix_srcfile_path
 
 # Set to yes if exported symbols are required.
 always_export_symbols=$always_export_symbols_F77
@@ -14095,7 +14816,10 @@ else
   # If there is no Makefile yet, we rely on a make rule to execute
   # `config.status --recheck' to rerun these tests and create the
   # libtool script then.
-  test -f Makefile && make "$ltmain"
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
 fi
 
 
@@ -14125,29 +14849,58 @@ objext=o
 objext_GCJ=$objext
 
 # Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}\n"
+lt_simple_compile_test_code="class foo {}"
 
 # Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String argv) {}; }\n'
+lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }'
 
 # ltmain only uses $CC for tagged configurations so make sure $CC is set.
 
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
 # Allow CC to be a program name with arguments.
 compiler=$CC
 
 
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
 # Allow CC to be a program name with arguments.
 lt_save_CC="$CC"
 CC=${GCJ-"gcj"}
 compiler=$CC
 compiler_GCJ=$CC
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
 
 # GCJ did not exist at the time GCC didn't implicitly link libc in.
 archive_cmds_need_lc_GCJ=no
 
+old_archive_cmds_GCJ=$old_archive_cmds
+
 ## CAVEAT EMPTOR:
 ## There is no encapsulation within the following macros, do not change
 ## the running order or otherwise move them around unless you know exactly
@@ -14158,14 +14911,15 @@ lt_prog_compiler_no_builtin_flag_GCJ=
 if test "$GCC" = yes; then
   lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
 
-  echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+
+echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
 echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
 if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   lt_cv_prog_compiler_rtti_exceptions=no
   ac_outfile=conftest.$ac_objext
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="-fno-rtti -fno-exceptions"
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
@@ -14173,18 +14927,20 @@ else
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    # The option is referenced via a variable to avoid confusing sed.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:14179: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:14933: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:14183: \$? = $ac_status" >&5
+   echo "$as_me:14937: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test ! -s conftest.err; then
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_rtti_exceptions=yes
      fi
    fi
@@ -14229,13 +14985,15 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
       ;;
 
-    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
       # PIC is the default for these OSes.
       ;;
 
-    mingw* | pw32* | os2*)
+    mingw* | cygwin* | pw32* | os2*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
       lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
       ;;
 
@@ -14245,6 +15003,11 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_pic_GCJ='-fno-common'
       ;;
 
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
     msdosdjgpp*)
       # Just because we use GCC doesn't mean we suddenly get shared libraries
       # on systems that don't support them.
@@ -14261,7 +15024,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
     hpux*)
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
-      case "$host_cpu" in
+      case $host_cpu in
       hppa*64*|ia64*)
 	# +Z the default
 	;;
@@ -14287,8 +15050,18 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
       fi
       ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case $cc_basename in
+         xlc*)
+         lt_prog_compiler_pic_GCJ='-qnocommon'
+         lt_prog_compiler_wl_GCJ='-Wl,'
+         ;;
+       esac
+       ;;
 
-    mingw* | pw32* | os2*)
+    mingw* | cygwin* | pw32* | os2*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
@@ -14298,7 +15071,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_wl_GCJ='-Wl,'
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
-      case "$host_cpu" in
+      case $host_cpu in
       hppa*64*|ia64*)
 	# +Z the default
 	;;
@@ -14321,18 +15094,41 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_static_GCJ='-Bstatic'
       ;;
 
-    linux*)
-      case $CC in
-      icc|ecc)
+    linux* | k*bsd*-gnu)
+      case $cc_basename in
+      icc* | ecc*)
 	lt_prog_compiler_wl_GCJ='-Wl,'
 	lt_prog_compiler_pic_GCJ='-KPIC'
 	lt_prog_compiler_static_GCJ='-static'
         ;;
-      ccc)
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl_GCJ='-Wl,'
+	lt_prog_compiler_pic_GCJ='-fpic'
+	lt_prog_compiler_static_GCJ='-Bstatic'
+        ;;
+      ccc*)
         lt_prog_compiler_wl_GCJ='-Wl,'
         # All Alpha code is PIC.
         lt_prog_compiler_static_GCJ='-non_shared'
         ;;
+      *)
+        case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic_GCJ='-KPIC'
+	  lt_prog_compiler_static_GCJ='-Bstatic'
+	  lt_prog_compiler_wl_GCJ='-Wl,'
+	  ;;
+	*Sun\ F*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic_GCJ='-KPIC'
+	  lt_prog_compiler_static_GCJ='-Bstatic'
+	  lt_prog_compiler_wl_GCJ=''
+	  ;;
+	esac
+	;;
       esac
       ;;
 
@@ -14342,15 +15138,19 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_static_GCJ='-non_shared'
       ;;
 
-    sco3.2v5*)
-      lt_prog_compiler_pic_GCJ='-Kpic'
-      lt_prog_compiler_static_GCJ='-dn'
+    rdos*)
+      lt_prog_compiler_static_GCJ='-non_shared'
       ;;
 
     solaris*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
       lt_prog_compiler_pic_GCJ='-KPIC'
       lt_prog_compiler_static_GCJ='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	lt_prog_compiler_wl_GCJ='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl_GCJ='-Wl,';;
+      esac
       ;;
 
     sunos4*)
@@ -14359,7 +15159,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_static_GCJ='-Bstatic'
       ;;
 
-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+    sysv4 | sysv4.2uw2* | sysv4.3*)
       lt_prog_compiler_wl_GCJ='-Wl,'
       lt_prog_compiler_pic_GCJ='-KPIC'
       lt_prog_compiler_static_GCJ='-Bstatic'
@@ -14372,6 +15172,17 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       fi
       ;;
 
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      lt_prog_compiler_pic_GCJ='-KPIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      lt_prog_compiler_can_build_shared_GCJ=no
+      ;;
+
     uts4*)
       lt_prog_compiler_pic_GCJ='-pic'
       lt_prog_compiler_static_GCJ='-Bstatic'
@@ -14390,14 +15201,15 @@ echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6
 # Check to make sure the PIC flag actually works.
 #
 if test -n "$lt_prog_compiler_pic_GCJ"; then
-  echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
+
+echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
 echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6
 if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   lt_prog_compiler_pic_works_GCJ=no
   ac_outfile=conftest.$ac_objext
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
@@ -14405,18 +15217,20 @@ else
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    # The option is referenced via a variable to avoid confusing sed.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:14411: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:15223: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:14415: \$? = $ac_status" >&5
+   echo "$as_me:15227: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test ! -s conftest.err; then
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_prog_compiler_pic_works_GCJ=yes
      fi
    fi
@@ -14437,7 +15251,7 @@ else
 fi
 
 fi
-case "$host_os" in
+case $host_os in
   # For platforms which do not support PIC, -DPIC is meaningless:
   *djgpp*)
     lt_prog_compiler_pic_GCJ=
@@ -14447,6 +15261,48 @@ case "$host_os" in
     ;;
 esac
 
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_static_works_GCJ=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_prog_compiler_static_works_GCJ=yes
+       fi
+     else
+       lt_prog_compiler_static_works_GCJ=yes
+     fi
+   fi
+   $rm conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6
+
+if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then
+    :
+else
+    lt_prog_compiler_static_GCJ=
+fi
+
+
 echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
 echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
 if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
@@ -14457,14 +15313,7 @@ else
    mkdir conftest
    cd conftest
    mkdir out
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-   # that will create temporary files in the current directory regardless of
-   # the output directory.  Thus, making CWD read-only will cause this test
-   # to fail, enabling locking or at least warning the user not to do parallel
-   # builds.
-   chmod -w .
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
    lt_compiler_flag="-o out/conftest2.$ac_objext"
    # Insert the option either (1) after the last *FLAGS variable, or
@@ -14472,25 +15321,30 @@ else
    # Note that $ac_compile itself does not contain backslashes and begins
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:14478: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:15327: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:14482: \$? = $ac_status" >&5
+   echo "$as_me:15331: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     if test ! -s out/conftest.err; then
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_c_o_GCJ=yes
      fi
    fi
-   chmod u+w .
-   $rm conftest* out/*
-   rmdir out
+   chmod u+w . 2>&5
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
    cd ..
    rmdir conftest
    $rm conftest*
@@ -14561,6 +15415,16 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
   # rely on this symbol name, it's probably fine to never include it in
   # preloaded symbol tables.
   extract_expsyms_cmds=
+  # Just being paranoid about ensuring that cc_basename is set.
+  for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
   case $host_os in
   cygwin* | mingw* | pw32*)
@@ -14571,6 +15435,10 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
       with_gnu_ld=no
     fi
     ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
   openbsd*)
     with_gnu_ld=no
     ;;
@@ -14581,6 +15449,27 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
     # If archive_cmds runs LD, not CC, wlarc should be empty
     wlarc='${wl}'
 
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+	whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	whole_archive_flag_spec_GCJ=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>/dev/null` in
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
     # See if GNU ld supports shared libraries.
     case $host_os in
     aix3* | aix4* | aix5*)
@@ -14631,10 +15520,10 @@ EOF
       allow_undefined_flag_GCJ=unsupported
       always_export_symbols_GCJ=no
       enable_shared_with_static_runtimes_GCJ=yes
-      export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+      export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
 
       if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+        archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 	# If the export-symbols file already is a .def file (1st line
 	# is EXPORTS), use it as is; otherwise, prepend...
 	archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
@@ -14643,9 +15532,64 @@ EOF
 	  echo EXPORTS > $output_objdir/$soname.def;
 	  cat $export_symbols >> $output_objdir/$soname.def;
 	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000  ${wl}--out-implib,$lib'
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
       else
-	ld_shlibs=no
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct_GCJ=no
+      hardcode_shlibpath_var_GCJ=no
+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec_GCJ='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | k*bsd*-gnu)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	tmp_addflag=
+	case $cc_basename,$host_cpu in
+	pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	*)
+	  tmp_sharedflag='-shared' ;;
+	esac
+	archive_cmds_GCJ='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+	if test $supports_anon_versioning = yes; then
+	  archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+  $echo "local: *; };" >> $output_objdir/$libname.ver~
+	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	fi
+      else
+	ld_shlibs_GCJ=no
       fi
       ;;
 
@@ -14659,7 +15603,7 @@ EOF
       fi
       ;;
 
-    solaris* | sysv5*)
+    solaris*)
       if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
 	ld_shlibs_GCJ=no
 	cat <<EOF 1>&2
@@ -14680,6 +15624,33 @@ EOF
       fi
       ;;
 
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs_GCJ=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+	    archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+	    archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  else
+	    ld_shlibs_GCJ=no
+	  fi
+	;;
+      esac
+      ;;
+
     sunos4*)
       archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
       wlarc=
@@ -14697,16 +15668,11 @@ EOF
       ;;
     esac
 
-    if test "$ld_shlibs_GCJ" = yes; then
-      runpath_var=LD_RUN_PATH
-      hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
-      export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
-      # ancient GNU ld didn't support --whole-archive et. al.
-      if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- 	whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	whole_archive_flag_spec_GCJ=
-      fi
+    if test "$ld_shlibs_GCJ" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec_GCJ=
+      export_dynamic_flag_spec_GCJ=
+      whole_archive_flag_spec_GCJ=
     fi
   else
     # PORTME fill in a description of your system's linker (not GNU ld)
@@ -14718,7 +15684,7 @@ EOF
       # Note: this linker hardcodes the directories in LIBPATH if there
       # are no directories specified by -L.
       hardcode_minus_L_GCJ=yes
-      if test "$GCC" = yes && test -z "$link_static_flag"; then
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
 	# Neither direct hardcoding nor static linking is supported with a
 	# broken collect2.
 	hardcode_direct_GCJ=unsupported
@@ -14752,6 +15718,7 @@ EOF
   	    break
   	  fi
 	  done
+	  ;;
 	esac
 
 	exp_sym_flag='-bexport'
@@ -14770,7 +15737,7 @@ EOF
       link_all_deplibs_GCJ=yes
 
       if test "$GCC" = yes; then
-	case $host_os in aix4.012|aix4.012.*)
+	case $host_os in aix4.[012]|aix4.[012].*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
 	  collect2name=`${CC} -print-prog-name=collect2`
@@ -14778,7 +15745,7 @@ EOF
   	   strings "$collect2name" | grep resolve_lib_name >/dev/null
 	  then
   	  # We have reworked collect2
-  	  hardcode_direct_GCJ=yes
+  	  :
 	  else
   	  # We have old collect2
   	  hardcode_direct_GCJ=unsupported
@@ -14789,8 +15756,12 @@ EOF
   	  hardcode_libdir_flag_spec_GCJ='-L$libdir'
   	  hardcode_libdir_separator_GCJ=
 	  fi
+	  ;;
 	esac
 	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
       else
 	# not using gcc
 	if test "$host_cpu" = ia64; then
@@ -14798,11 +15769,11 @@ EOF
   	# chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
 	else
-  	if test "$aix_use_runtimelinking" = yes; then
+	  if test "$aix_use_runtimelinking" = yes; then
 	    shared_flag='${wl}-G'
 	  else
 	    shared_flag='${wl}-bM:SRE'
-  	fi
+	  fi
 	fi
       fi
 
@@ -14815,7 +15786,6 @@ EOF
 	allow_undefined_flag_GCJ='-berok'
        # Determine the default libpath from the value encoded in an empty executable.
        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -14832,41 +15802,58 @@ main ()
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+  (eval $ac_link) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
 
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 # Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
        hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+	archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
        else
 	if test "$host_cpu" = ia64; then
 	  hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
 	  allow_undefined_flag_GCJ="-z nodefs"
-	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
 	else
 	 # Determine the default libpath from the value encoded in an empty executable.
 	 cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -14883,28 +15870,46 @@ main ()
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+  (eval $ac_link) 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
 
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 # Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
 	 hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
@@ -14912,13 +15917,11 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	  # -berok will link without error, but may produce a broken library.
 	  no_undefined_flag_GCJ=' ${wl}-bernotok'
 	  allow_undefined_flag_GCJ=' ${wl}-berok'
-	  # -bexpall does not export symbols beginning with underscore (_)
-	  always_export_symbols_GCJ=yes
 	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec_GCJ=' '
+	  whole_archive_flag_spec_GCJ='$convenience'
 	  archive_cmds_need_lc_GCJ=yes
-	  # This is similar to how AIX traditionally builds it's shared libraries.
-	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
 	fi
       fi
       ;;
@@ -14931,7 +15934,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ld_shlibs_GCJ=no
       ;;
 
-    bsdi4*)
+    bsdi[45]*)
       export_dynamic_flag_spec_GCJ=-rdynamic
       ;;
 
@@ -14945,55 +15948,64 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       # Tell ltmain to make .lib files, not .a files.
       libext=lib
       # Tell ltmain to make .dll files, not .so files.
-      shrext=".dll"
+      shrext_cmds=".dll"
       # FIXME: Setting linknames here is a bad hack.
       archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
       # The linker will automatically build a .lib file if we build a DLL.
       old_archive_From_new_cmds_GCJ='true'
       # FIXME: Should let the user specify the lib program.
-      old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path='`cygpath -w "$srcfile"`'
+      old_archive_cmds_GCJ='lib -OUT:$oldlib$oldobjs$old_deplibs'
+      fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
       enable_shared_with_static_runtimes_GCJ=yes
       ;;
 
     darwin* | rhapsody*)
-    if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-      archive_cmds_need_lc_GCJ=no
-      case "$host_os" in
-      rhapsody* | darwin1.[012])
-	allow_undefined_flag_GCJ='-undefined suppress'
-	;;
-      *) # Darwin 1.3 on
-	test -z ${LD_TWOLEVEL_NAMESPACE} && allow_undefined_flag_GCJ='-flat_namespace -undefined suppress'
-	;;
+      case $host_os in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
       esac
-      # FIXME: Relying on posixy $() will cause problems for
-      #        cross-compilation, but unfortunately the echo tests do not
-      #        yet detect zsh echo's removal of \ escapes.  Also zsh mangles
-      #	       `"' quotes if we put them in here... so don't!
-    	lt_int_apple_cc_single_mod=no
-    	output_verbose_link_cmd='echo'
-    	if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-    	  lt_int_apple_cc_single_mod=yes
-    	fi
-    	if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-    	  archive_cmds_GCJ='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-    	else
-        archive_cmds_GCJ='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      fi
-      module_cmds_GCJ='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-        if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-          archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        else
-          archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        fi
-          module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag  -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      archive_cmds_need_lc_GCJ=no
       hardcode_direct_GCJ=no
       hardcode_automatic_GCJ=yes
       hardcode_shlibpath_var_GCJ=unsupported
-      whole_archive_flag_spec_GCJ='-all_load $convenience'
+      whole_archive_flag_spec_GCJ=''
       link_all_deplibs_GCJ=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+      archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
+         module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+         archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs_GCJ=no
+          ;;
+      esac
     fi
       ;;
 
@@ -15027,7 +16039,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd*)
+    freebsd* | dragonfly*)
       archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
       hardcode_libdir_flag_spec_GCJ='-R$libdir'
       hardcode_direct_GCJ=yes
@@ -15050,47 +16062,62 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       export_dynamic_flag_spec_GCJ='${wl}-E'
       ;;
 
-    hpux10* | hpux11*)
+    hpux10*)
       if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case "$host_cpu" in
-	hppa*64*|ia64*)
+	archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_GCJ=:
+
+	hardcode_direct_GCJ=yes
+	export_dynamic_flag_spec_GCJ='${wl}-E'
+
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L_GCJ=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
 	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
+	ia64*)
+	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
 	*)
 	  archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
-	case "$host_cpu" in
-	hppa*64*|ia64*)
-	  archive_cmds_GCJ='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       fi
       if test "$with_gnu_ld" = no; then
-	case "$host_cpu" in
-	hppa*64*)
-	  hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-	  hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
-	  hardcode_libdir_separator_GCJ=:
-	  hardcode_direct_GCJ=no
-	  hardcode_shlibpath_var_GCJ=no
-	  ;;
-	ia64*)
-	  hardcode_libdir_flag_spec_GCJ='-L$libdir'
-	  hardcode_direct_GCJ=no
-	  hardcode_shlibpath_var_GCJ=no
+	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_GCJ=:
 
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  hardcode_minus_L_GCJ=yes
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
+	  hardcode_direct_GCJ=no
+	  hardcode_shlibpath_var_GCJ=no
 	  ;;
 	*)
-	  hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-	  hardcode_libdir_separator_GCJ=:
 	  hardcode_direct_GCJ=yes
 	  export_dynamic_flag_spec_GCJ='${wl}-E'
 
@@ -15134,23 +16161,28 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ;;
 
     openbsd*)
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec_GCJ='${wl}-E'
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct_GCJ=yes
+	hardcode_shlibpath_var_GCJ=no
+	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec_GCJ='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec_GCJ='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+        fi
       else
-       case $host_os in
-	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	   archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	   hardcode_libdir_flag_spec_GCJ='-R$libdir'
-	   ;;
-	 *)
-	   archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	   hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-	   ;;
-       esac
+	ld_shlibs_GCJ=no
       fi
       ;;
 
@@ -15183,7 +16215,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	allow_undefined_flag_GCJ=' -expect_unresolved \*'
 	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
 	archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
@@ -15191,21 +16223,15 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_libdir_separator_GCJ=:
       ;;
 
-    sco3.2v5*)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var_GCJ=no
-      export_dynamic_flag_spec_GCJ='${wl}-Bexport'
-      runpath_var=LD_RUN_PATH
-      hardcode_runpath_var=yes
-      ;;
-
     solaris*)
       no_undefined_flag_GCJ=' -z text'
       if test "$GCC" = yes; then
+	wlarc='${wl}'
 	archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
 	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
       else
+	wlarc=''
 	archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
 	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
   	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
@@ -15214,8 +16240,17 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_shlibpath_var_GCJ=no
       case $host_os in
       solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-	whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract'
+	fi
+	;;
       esac
       link_all_deplibs_GCJ=yes
       ;;
@@ -15272,36 +16307,45 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       fi
       ;;
 
-    sysv4.2uw2*)
-      archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_GCJ=yes
-      hardcode_minus_L_GCJ=no
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag_GCJ='${wl}-z,text'
+      archive_cmds_need_lc_GCJ=no
       hardcode_shlibpath_var_GCJ=no
-      hardcode_runpath_var=yes
-      runpath_var=LD_RUN_PATH
-      ;;
+      runpath_var='LD_RUN_PATH'
 
-   sysv5OpenUNIX8* | sysv5UnixWare7* |  sysv5uw[78]* | unixware7*)
-      no_undefined_flag_GCJ='${wl}-z ${wl}text'
       if test "$GCC" = yes; then
-	archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	archive_cmds_GCJ='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var_GCJ=no
       ;;
 
-    sysv5*)
-      no_undefined_flag_GCJ=' -z text'
-      # $CC -shared without GNU ld will not create a library from C++
-      # object files and a static libstdc++, better avoid it by now
-      archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      hardcode_libdir_flag_spec_GCJ=
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag_GCJ='${wl}-z,text'
+      allow_undefined_flag_GCJ='${wl}-z,nodefs'
+      archive_cmds_need_lc_GCJ=no
       hardcode_shlibpath_var_GCJ=no
+      hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_separator_GCJ=':'
+      link_all_deplibs_GCJ=yes
+      export_dynamic_flag_spec_GCJ='${wl}-Bexport'
       runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
       ;;
 
     uts4*)
@@ -15320,11 +16364,6 @@ echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
 echo "${ECHO_T}$ld_shlibs_GCJ" >&6
 test "$ld_shlibs_GCJ" = no && can_build_shared=no
 
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
 #
 # Do we need to explicitly link libc?
 #
@@ -15345,7 +16384,7 @@ x|xyes)
       echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
 echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
       $rm conftest*
-      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
       if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
@@ -15357,6 +16396,7 @@ echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&
         libobjs=conftest.$ac_objext
         deplibs=
         wl=$lt_prog_compiler_wl_GCJ
+	pic_flag=$lt_prog_compiler_pic_GCJ
         compiler_flags=-v
         linker_flags=-v
         verstring=
@@ -15387,78 +16427,12 @@ echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6
   ;;
 esac
 
-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
-hardcode_action_GCJ=
-if test -n "$hardcode_libdir_flag_spec_GCJ" || \
-   test -n "$runpath_var GCJ" || \
-   test "X$hardcode_automatic_GCJ"="Xyes" ; then
-
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct_GCJ" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
-     test "$hardcode_minus_L_GCJ" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action_GCJ=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action_GCJ=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action_GCJ=unsupported
-fi
-echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
-echo "${ECHO_T}$hardcode_action_GCJ" >&6
-
-if test "$hardcode_action_GCJ" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-striplib=
-old_striplib=
-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-   darwin*)
-       if test -n "$STRIP" ; then
-         striplib="$STRIP -x"
-         echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-       else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-       ;;
-   *)
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-    ;;
-  esac
-fi
-
 echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
 echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
-shrext=".so"
+shrext_cmds=".so"
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
@@ -15468,20 +16442,7 @@ shlibpath_overrides_runpath=unknown
 version_type=none
 dynamic_linker="$host_os ld.so"
 sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
-  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
-else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
+
 need_lib_prefix=unknown
 hardcode_into_libs=no
 
@@ -15546,7 +16507,7 @@ aix4* | aix5*)
 amigaos*)
   library_names_spec='$libname.ixlibrary $libname.a'
   # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
   ;;
 
 beos*)
@@ -15555,7 +16516,7 @@ beos*)
   shlibpath_var=LIBRARY_PATH
   ;;
 
-bsdi4*)
+bsdi[45]*)
   version_type=linux
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -15571,7 +16532,7 @@ bsdi4*)
 
 cygwin* | mingw* | pw32*)
   version_type=windows
-  shrext=".dll"
+  shrext_cmds=".dll"
   need_version=no
   need_lib_prefix=no
 
@@ -15583,7 +16544,8 @@ cygwin* | mingw* | pw32*)
       dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname'
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
     postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
       dlpath=$dir/\$dldll~
        $rm \$dlpath'
@@ -15593,7 +16555,7 @@ cygwin* | mingw* | pw32*)
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
       ;;
     mingw*)
       # MinGW DLLs use traditional 'lib' prefix
@@ -15613,7 +16575,7 @@ cygwin* | mingw* | pw32*)
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
       ;;
     esac
     ;;
@@ -15632,18 +16594,12 @@ darwin* | rhapsody*)
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  # FIXME: Relying on posixy $() will cause problems for
-  #        cross-compilation, but unfortunately the echo tests do not
-  #        yet detect zsh echo's removal of \ escapes.
   library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
-  shrext='$(test .$module = .yes && echo .so || echo .dylib)'
-  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-  if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-  sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-  fi
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
   sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
   ;;
 
@@ -15660,8 +16616,17 @@ freebsd1*)
   dynamic_linker=no
   ;;
 
-freebsd*)
-  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
@@ -15679,14 +16644,19 @@ freebsd*)
   freebsd2*)
     shlibpath_overrides_runpath=yes
     ;;
-  freebsd3.01* | freebsdelf3.01*)
+  freebsd3.[01]* | freebsdelf3.[01]*)
     shlibpath_overrides_runpath=yes
     hardcode_into_libs=yes
     ;;
-  *) # from 3.2 on
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
     shlibpath_overrides_runpath=no
     hardcode_into_libs=yes
     ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
   esac
   ;;
 
@@ -15706,9 +16676,9 @@ hpux9* | hpux10* | hpux11*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
-  case "$host_cpu" in
+  case $host_cpu in
   ia64*)
-    shrext='.so'
+    shrext_cmds='.so'
     hardcode_into_libs=yes
     dynamic_linker="$host_os dld.so"
     shlibpath_var=LD_LIBRARY_PATH
@@ -15723,7 +16693,7 @@ hpux9* | hpux10* | hpux11*)
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
    hppa*64*)
-     shrext='.sl'
+     shrext_cmds='.sl'
      hardcode_into_libs=yes
      dynamic_linker="$host_os dld.sl"
      shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
@@ -15734,7 +16704,7 @@ hpux9* | hpux10* | hpux11*)
      sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
      ;;
    *)
-    shrext='.sl'
+    shrext_cmds='.sl'
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
@@ -15746,6 +16716,18 @@ hpux9* | hpux10* | hpux11*)
   postinstall_cmds='chmod 555 $lib'
   ;;
 
+interix[3-9]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
 irix5* | irix6* | nonstopux*)
   case $host_os in
     nonstopux*) version_type=nonstopux ;;
@@ -15789,7 +16771,7 @@ linux*oldld* | linux*aout* | linux*coff*)
   ;;
 
 # This must be Linux ELF.
-linux*)
+linux* | k*bsd*-gnu)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -15803,6 +16785,12 @@ linux*)
   # before this can be enabled.
   hardcode_into_libs=yes
 
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
   # We used to test for /lib/ld.so.1 and disable shared libraries on
   # powerpc, because MkLinux only supported shared libraries with the
   # GNU dynamic linker.  Since this was broken with cross compilers,
@@ -15821,7 +16809,7 @@ netbsd*)
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
   else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
     soname_spec='${libname}${release}${shared_ext}$major'
     dynamic_linker='NetBSD ld.elf_so'
   fi
@@ -15837,7 +16825,7 @@ newsos6)
   shlibpath_overrides_runpath=yes
   ;;
 
-nto-qnx)
+nto-qnx*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -15849,8 +16837,13 @@ nto-qnx)
 
 openbsd*)
   version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
   need_lib_prefix=no
-  need_version=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
@@ -15870,7 +16863,7 @@ openbsd*)
 
 os2*)
   libname_spec='$name'
-  shrext=".dll"
+  shrext_cmds=".dll"
   need_lib_prefix=no
   library_names_spec='$libname${shared_ext} $libname.a'
   dynamic_linker='OS/2 ld.exe'
@@ -15888,11 +16881,8 @@ osf3* | osf4* | osf5*)
   sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
   ;;
 
-sco3.2v5*)
-  version_type=osf
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
+rdos*)
+  dynamic_linker=no
   ;;
 
 solaris*)
@@ -15920,7 +16910,7 @@ sunos4*)
   need_version=yes
   ;;
 
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+sysv4 | sysv4.3*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
@@ -15953,6 +16943,29 @@ sysv4*MP*)
   fi
   ;;
 
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
 uts4*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -15968,724 +16981,46 @@ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
 echo "${ECHO_T}$dynamic_linker" >&6
 test "$dynamic_linker" = no && can_build_shared=no
 
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  mingw* | pw32*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-   ;;
-
-  cygwin*)
-    lt_cv_dlopen="dlopen"
-    lt_cv_dlopen_libs=
-   ;;
-
-  darwin*)
-  # if libdl is installed we need to link against it
-    echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dl_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dl_dlopen=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
-if test $ac_cv_lib_dl_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-
-    lt_cv_dlopen="dyld"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
 
-   ;;
+echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+hardcode_action_GCJ=
+if test -n "$hardcode_libdir_flag_spec_GCJ" || \
+   test -n "$runpath_var_GCJ" || \
+   test "X$hardcode_automatic_GCJ" = "Xyes" ; then
 
-  *)
-    echo "$as_me:$LINENO: checking for shl_load" >&5
-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
-if test "${ac_cv_func_shl_load+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char shl_load (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char shl_load ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_shl_load) || defined (__stub___shl_load)
-choke me
-#else
-char (*f) () = shl_load;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != shl_load;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_shl_load=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_shl_load=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-echo "${ECHO_T}$ac_cv_func_shl_load" >&6
-if test $ac_cv_func_shl_load = yes; then
-  lt_cv_dlopen="shl_load"
-else
-  echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char shl_load ();
-int
-main ()
-{
-shl_load ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dld_shl_load=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dld_shl_load=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
-if test $ac_cv_lib_dld_shl_load = yes; then
-  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
-else
-  echo "$as_me:$LINENO: checking for dlopen" >&5
-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
-if test "${ac_cv_func_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char dlopen (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_dlopen) || defined (__stub___dlopen)
-choke me
-#else
-char (*f) () = dlopen;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != dlopen;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_dlopen=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-echo "${ECHO_T}$ac_cv_func_dlopen" >&6
-if test $ac_cv_func_dlopen = yes; then
-  lt_cv_dlopen="dlopen"
-else
-  echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dl_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dl_dlopen=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
-if test $ac_cv_lib_dl_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-  echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsvld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_svld_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_svld_dlopen=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
-if test $ac_cv_lib_svld_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-else
-  echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dld_link ();
-int
-main ()
-{
-dld_link ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dld_dld_link=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dld_dld_link=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
-if test $ac_cv_lib_dld_dld_link = yes; then
-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct_GCJ" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
+     test "$hardcode_minus_L_GCJ" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_GCJ=relink
   else
-    enable_dlopen=no
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_GCJ=immediate
   fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
-if test "${lt_cv_dlopen_self+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 16490 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-
-    exit (status);
-}
-EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self=no
-  fi
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_GCJ=unsupported
 fi
-rm -fr conftest*
+echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
+echo "${ECHO_T}$hardcode_action_GCJ" >&6
 
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self" >&6
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      LDFLAGS="$LDFLAGS $link_static_flag"
-      echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
-if test "${lt_cv_dlopen_self_static+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self_static=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 16588 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-
-    exit (status);
-}
-EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self_static=no
-  fi
-fi
-rm -fr conftest*
-
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
+if test "$hardcode_action_GCJ" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
 fi
 
 
@@ -16702,7 +17037,8 @@ if test -f "$ltmain"; then
   # Now quote all the things that may contain metacharacters while being
   # careful not to overquote the AC_SUBSTed values.  We take copies of the
   # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
     libname_spec library_names_spec soname_spec extract_expsyms_cmds \
     old_striplib striplib file_magic_cmd finish_cmds finish_eval \
     deplibs_check_method reload_flag reload_cmds need_locks \
@@ -16743,6 +17079,7 @@ if test -f "$ltmain"; then
     module_cmds_GCJ \
     module_expsym_cmds_GCJ \
     lt_cv_prog_compiler_c_o_GCJ \
+    fix_srcfile_path_GCJ \
     exclude_expsyms_GCJ \
     include_expsyms_GCJ; do
 
@@ -16802,6 +17139,12 @@ fast_install=$enable_fast_install
 # The host system.
 host_alias=$host_alias
 host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
 
 # An echo program that does not interpret backslashes.
 echo=$lt_echo
@@ -16813,6 +17156,9 @@ AR_FLAGS=$lt_AR_FLAGS
 # A C compiler.
 LTCC=$lt_LTCC
 
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
 # A language-specific compiler.
 CC=$lt_compiler_GCJ
 
@@ -16832,7 +17178,7 @@ LN_S=$lt_LN_S
 NM=$lt_NM
 
 # A symbol stripping program
-STRIP=$STRIP
+STRIP=$lt_STRIP
 
 # Used to examine libraries when file_magic_cmd begins "file"
 MAGIC_CMD=$MAGIC_CMD
@@ -16863,7 +17209,7 @@ objext="$ac_objext"
 libext="$libext"
 
 # Shared library suffix (normally ".so").
-shrext='$shrext'
+shrext_cmds='$shrext_cmds'
 
 # Executable file suffix (normally "").
 exeext="$exeext"
@@ -16878,7 +17224,7 @@ max_cmd_len=$lt_cv_sys_max_cmd_len
 # Does compiler simultaneously support -c and -o options?
 compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
 
-# Must we lock files when doing compilation ?
+# Must we lock files when doing compilation?
 need_locks=$lt_need_locks
 
 # Do we need the lib prefix for modules?
@@ -17054,7 +17400,7 @@ sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
 # Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_GCJ"
+fix_srcfile_path=$lt_fix_srcfile_path
 
 # Set to yes if exported symbols are required.
 always_export_symbols=$always_export_symbols_GCJ
@@ -17080,7 +17426,10 @@ else
   # If there is no Makefile yet, we rely on a make rule to execute
   # `config.status --recheck' to rerun these tests and create the
   # libtool script then.
-  test -f Makefile && make "$ltmain"
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
 fi
 
 
@@ -17109,7 +17458,7 @@ objext=o
 objext_RC=$objext
 
 # Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
 
 # Code to be used in simple link tests
 lt_simple_link_test_code="$lt_simple_compile_test_code"
@@ -17119,15 +17468,42 @@ lt_simple_link_test_code="$lt_simple_compile_test_code"
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
 # Allow CC to be a program name with arguments.
 compiler=$CC
 
 
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
 # Allow CC to be a program name with arguments.
 lt_save_CC="$CC"
 CC=${RC-"windres"}
 compiler=$CC
 compiler_RC=$CC
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
 lt_cv_prog_compiler_c_o_RC=yes
 
 # The else clause should only fire when bootstrapping the
@@ -17143,7 +17519,8 @@ if test -f "$ltmain"; then
   # Now quote all the things that may contain metacharacters while being
   # careful not to overquote the AC_SUBSTed values.  We take copies of the
   # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
     libname_spec library_names_spec soname_spec extract_expsyms_cmds \
     old_striplib striplib file_magic_cmd finish_cmds finish_eval \
     deplibs_check_method reload_flag reload_cmds need_locks \
@@ -17184,6 +17561,7 @@ if test -f "$ltmain"; then
     module_cmds_RC \
     module_expsym_cmds_RC \
     lt_cv_prog_compiler_c_o_RC \
+    fix_srcfile_path_RC \
     exclude_expsyms_RC \
     include_expsyms_RC; do
 
@@ -17243,6 +17621,12 @@ fast_install=$enable_fast_install
 # The host system.
 host_alias=$host_alias
 host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
 
 # An echo program that does not interpret backslashes.
 echo=$lt_echo
@@ -17254,6 +17638,9 @@ AR_FLAGS=$lt_AR_FLAGS
 # A C compiler.
 LTCC=$lt_LTCC
 
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
 # A language-specific compiler.
 CC=$lt_compiler_RC
 
@@ -17273,7 +17660,7 @@ LN_S=$lt_LN_S
 NM=$lt_NM
 
 # A symbol stripping program
-STRIP=$STRIP
+STRIP=$lt_STRIP
 
 # Used to examine libraries when file_magic_cmd begins "file"
 MAGIC_CMD=$MAGIC_CMD
@@ -17304,7 +17691,7 @@ objext="$ac_objext"
 libext="$libext"
 
 # Shared library suffix (normally ".so").
-shrext='$shrext'
+shrext_cmds='$shrext_cmds'
 
 # Executable file suffix (normally "").
 exeext="$exeext"
@@ -17319,7 +17706,7 @@ max_cmd_len=$lt_cv_sys_max_cmd_len
 # Does compiler simultaneously support -c and -o options?
 compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
 
-# Must we lock files when doing compilation ?
+# Must we lock files when doing compilation?
 need_locks=$lt_need_locks
 
 # Do we need the lib prefix for modules?
@@ -17495,7 +17882,7 @@ sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
 # Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_RC"
+fix_srcfile_path=$lt_fix_srcfile_path
 
 # Set to yes if exported symbols are required.
 always_export_symbols=$always_export_symbols_RC
@@ -17521,7 +17908,10 @@ else
   # If there is no Makefile yet, we rely on a make rule to execute
   # `config.status --recheck' to rerun these tests and create the
   # libtool script then.
-  test -f Makefile && make "$ltmain"
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
 fi
 
 
diff --git a/src/lt/ltmain.sh b/src/lt/ltmain.sh
index fe83ff4fb7..4598ec61cc 100644
--- a/src/lt/ltmain.sh
+++ b/src/lt/ltmain.sh
@@ -1,8 +1,8 @@
 # ltmain.sh - Provide generalized library-building support services.
 # NOTE: Changing this file will not affect anything until you rerun configure.
 #
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007  Free Software Foundation, Inc.
 # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 #
 # This program is free software; you can redistribute it and/or modify
@@ -17,13 +17,49 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
+basename="s,^.*/,,g"
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+# The name of this program:
+progname=`echo "$progpath" | $SED $basename`
+modename="$progname"
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=1.5.24
+TIMESTAMP=" (1.1220.2.455 2007/06/24 02:13:29)"
+
+# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
 # Check that we have a working $echo.
 if test "X$1" = X--no-reexec; then
   # Discard the --no-reexec flag, and continue.
@@ -36,7 +72,7 @@ elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
   :
 else
   # Restart under the correct shell, and then maybe $echo will work.
-  exec $SHELL "$0" --no-reexec ${1+"$@"}
+  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
 fi
 
 if test "X$1" = X--fallback-echo; then
@@ -45,19 +81,9 @@ if test "X$1" = X--fallback-echo; then
   cat <<EOF
 $*
 EOF
-  exit 0
+  exit $EXIT_SUCCESS
 fi
 
-# The name of this program.
-progname=`$echo "$0" | ${SED} 's%^.*/%%'`
-modename="$progname"
-
-# Constants.
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION=1.5
-TIMESTAMP=" (1.1220 2003/04/05 19:32:58)"
-
 default_mode=
 help="Try \`$progname --help' for more information."
 magic="%%%MAGIC variable%%%"
@@ -70,14 +96,15 @@ rm="rm -f"
 Xsed="${SED}"' -e 1s/^X//'
 sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
 # test EBCDIC or ASCII
-case `echo A|od -x` in
- *[Cc]1*) # EBCDIC based system
-  SP2NL="tr '\100' '\n'"
-  NL2SP="tr '\r\n' '\100\100'"
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  SP2NL='tr \040 \012'
+  NL2SP='tr \015\012 \040\040'
   ;;
- *) # Assume ASCII based system
-  SP2NL="tr '\040' '\012'"
-  NL2SP="tr '\015\012' '\040\040'"
+ *) # EBCDIC based system
+  SP2NL='tr \100 \n'
+  NL2SP='tr \r\n \100\100'
   ;;
 esac
 
@@ -86,20 +113,24 @@ esac
 # These must not be set unconditionally because not all systems understand
 # e.g. LANG=C (notably SCO).
 # We save the old values to restore during execute mode.
-if test "${LC_ALL+set}" = set; then
-  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-fi
-if test "${LANG+set}" = set; then
-  save_LANG="$LANG"; LANG=C; export LANG
-fi
+for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+  eval "if test \"\${$lt_var+set}\" = set; then
+	  save_$lt_var=\$$lt_var
+	  $lt_var=C
+	  export $lt_var
+	fi"
+done
 
 # Make sure IFS has a sensible default
-: ${IFS=" 	"}
+lt_nl='
+'
+IFS=" 	$lt_nl"
 
 if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
   $echo "$modename: not configured to build any kind of library" 1>&2
   $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-  exit 1
+  exit $EXIT_FAILURE
 fi
 
 # Global variables.
@@ -111,17 +142,62 @@ run=
 show="$echo"
 show_help=
 execute_dlfiles=
+duplicate_deps=no
+preserve_args=
 lo2o="s/\\.lo\$/.${objext}/"
 o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
 
 #####################################
 # Shell function definitions:
 # This seems to be the best place for them
 
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+    my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+    if test "$run" = ":"; then
+      # Return a directory name, but don't create it in dry-run mode
+      my_tmpdir="${my_template}-$$"
+    else
+
+      # If mktemp works, use that first and foremost
+      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+      if test ! -d "$my_tmpdir"; then
+	# Failing that, at least try and use $RANDOM to avoid a race
+	my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+	save_mktempdir_umask=`umask`
+	umask 0077
+	$mkdir "$my_tmpdir"
+	umask $save_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$my_tmpdir" || {
+        $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
+	exit $EXIT_FAILURE
+      }
+    fi
+
+    $echo "X$my_tmpdir" | $Xsed
+}
+
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
 # Need a lot of goo to handle *both* DLLs and import libs
 # Has to be a shell function in order to 'eat' the argument
 # that is supplied when $file_magic_command is called.
-win32_libid () {
+func_win32_libid ()
+{
   win32_libid_type="unknown"
   win32_fileres=`file -L $1 2>/dev/null`
   case $win32_fileres in
@@ -130,17 +206,22 @@ win32_libid () {
     ;;
   *ar\ archive*) # could be an import, or static
     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
-      grep -E 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+      $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
       win32_nmres=`eval $NM -f posix -A $1 | \
-	sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'`
-      if test "X$win32_nmres" = "Ximport" ; then
-        win32_libid_type="x86 archive import"
-      else
-        win32_libid_type="x86 archive static"
-      fi
+	$SED -n -e '1,100{
+		/ I /{
+			s,.*,import,
+			p
+			q
+			}
+		}'`
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
     fi
     ;;
-  *DLL*) 
+  *DLL*)
     win32_libid_type="x86 DLL"
     ;;
   *executable*) # but shell scripts are "executable" too...
@@ -154,9 +235,191 @@ win32_libid () {
   $echo $win32_libid_type
 }
 
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+    if test -n "$available_tags" && test -z "$tagname"; then
+      CC_quoted=
+      for arg in $CC; do
+	case $arg in
+	  *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+	CC_quoted="$CC_quoted $arg"
+      done
+      case $@ in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+	for z in $available_tags; do
+	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    CC_quoted=
+	    for arg in $CC; do
+	    # Double-quote args containing other shell metacharacters.
+	    case $arg in
+	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	      arg="\"$arg\""
+	      ;;
+	    esac
+	    CC_quoted="$CC_quoted $arg"
+	  done
+	    case "$@ " in
+	      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
+	      # The compiler in the base compile command matches
+	      # the one in the tagged configuration.
+	      # Assume this is the tagged configuration we want.
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+	  fi
+	done
+	# If $tagname still isn't set, then no tagged configuration
+	# was found and let the user know that the "--tag" command
+	# line option must be used.
+	if test -z "$tagname"; then
+	  $echo "$modename: unable to infer tagged configuration"
+	  $echo "$modename: specify a tag with \`--tag'" 1>&2
+	  exit $EXIT_FAILURE
+#        else
+#          $echo "$modename: using $tagname tagged configuration"
+	fi
+	;;
+      esac
+    fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+
+    $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
+    $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
+      exit $EXIT_FAILURE
+    fi
+}
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    my_gentop="$1"; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
+    my_status=""
+
+    $show "${rm}r $my_gentop"
+    $run ${rm}r "$my_gentop"
+    $show "$mkdir $my_gentop"
+    $run $mkdir "$my_gentop"
+    my_status=$?
+    if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
+      exit $my_status
+    fi
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+	*" $my_xlib_u "*)
+	  extracted_serial=`expr $extracted_serial + 1`
+	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
+	*) break ;;
+	esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir="$my_gentop/$my_xlib_u"
+
+      $show "${rm}r $my_xdir"
+      $run ${rm}r "$my_xdir"
+      $show "$mkdir $my_xdir"
+      $run $mkdir "$my_xdir"
+      exit_status=$?
+      if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
+	exit $exit_status
+      fi
+      case $host in
+      *-darwin*)
+	$show "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	if test -z "$run"; then
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
+	  darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
+	  if test -n "$darwin_arches"; then 
+	    darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    $show "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches ; do
+	      mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+	      cd "$darwin_curdir"
+	      $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+	    done # $darwin_arches
+      ## Okay now we have a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+	      lipo -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    ${rm}r unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd "$darwin_orig_dir"
+ 	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	fi # $run
+	;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+        ;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+    done
+    func_extract_archives_result="$my_oldobjs"
+}
 # End of Shell function definitions
 #####################################
 
+# Darwin sucks
+eval std_shrext=\"$shrext_cmds\"
+
+disable_libs=no
+
 # Parse our command line options once, thoroughly.
 while test "$#" -gt 0
 do
@@ -176,12 +439,13 @@ do
       ;;
     tag)
       tagname="$arg"
+      preserve_args="${preserve_args}=$arg"
 
       # Check whether tagname contains only valid characters
       case $tagname in
       *[!-_A-Za-z0-9,/]*)
 	$echo "$progname: invalid tag name: $tagname" 1>&2
-	exit 1
+	exit $EXIT_FAILURE
 	;;
       esac
 
@@ -191,10 +455,10 @@ do
 	# not specially marked.
 	;;
       *)
-	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then
+	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
 	  taglist="$taglist $tagname"
 	  # Evaluate the configuration.
-	  eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`"
+	  eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
 	else
 	  $echo "$progname: ignoring unknown tag $tagname" 1>&2
 	fi
@@ -218,26 +482,28 @@ do
     ;;
 
   --version)
-    $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
-    $echo
-    $echo "Copyright (C) 2003  Free Software Foundation, Inc."
-    $echo "This is free software; see the source for copying conditions.  There is NO"
-    $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-    exit 0
+    echo "\
+$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP
+
+Copyright (C) 2007  Free Software Foundation, Inc.
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+    exit $?
     ;;
 
   --config)
-    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
+    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
     # Now print the configurations for the tags.
     for tagname in $taglist; do
-      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0"
+      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
     done
-    exit 0
+    exit $?
     ;;
 
   --debug)
     $echo "$progname: enabling shell trace mode"
     set -x
+    preserve_args="$preserve_args $arg"
     ;;
 
   --dry-run | -n)
@@ -256,7 +522,7 @@ do
     else
       $echo "disable static libraries"
     fi
-    exit 0
+    exit $?
     ;;
 
   --finish) mode="finish" ;;
@@ -268,13 +534,19 @@ do
 
   --quiet | --silent)
     show=:
+    preserve_args="$preserve_args $arg"
     ;;
 
-  --tag) prevopt="--tag" prev=tag ;;
+  --tag)
+    prevopt="--tag"
+    prev=tag
+    preserve_args="$preserve_args --tag"
+    ;;
   --tag=*)
     set tag "$optarg" ${1+"$@"}
     shift
     prev=tag
+    preserve_args="$preserve_args --tag"
     ;;
 
   -dlopen)
@@ -285,7 +557,7 @@ do
   -*)
     $echo "$modename: unrecognized option \`$arg'" 1>&2
     $echo "$help" 1>&2
-    exit 1
+    exit $EXIT_FAILURE
     ;;
 
   *)
@@ -298,9 +570,21 @@ done
 if test -n "$prevopt"; then
   $echo "$modename: option \`$prevopt' requires an argument" 1>&2
   $echo "$help" 1>&2
-  exit 1
+  exit $EXIT_FAILURE
 fi
 
+case $disable_libs in
+no) 
+  ;;
+shared)
+  build_libtool_libs=no
+  build_old_libs=yes
+  ;;
+static)
+  build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+  ;;
+esac
+
 # If this variable is set in any of the actions, the command in it
 # will be execed at the end.  This prevents here-documents from being
 # left over by shells.
@@ -311,7 +595,7 @@ if test -z "$show_help"; then
   # Infer the operation mode.
   if test -z "$mode"; then
     $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
-    $echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2
+    $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
     case $nonopt in
     *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
       mode=link
@@ -354,7 +638,7 @@ if test -z "$show_help"; then
   if test -n "$execute_dlfiles" && test "$mode" != execute; then
     $echo "$modename: unrecognized option \`-dlopen'" 1>&2
     $echo "$help" 1>&2
-    exit 1
+    exit $EXIT_FAILURE
   fi
 
   # Change the help message to a mode-specific one.
@@ -369,13 +653,15 @@ if test -z "$show_help"; then
     # Get the compilation command and the source file.
     base_compile=
     srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
+    suppress_opt=yes
     suppress_output=
     arg_mode=normal
     libobj=
+    later=
 
     for arg
     do
-      case "$arg_mode" in
+      case $arg_mode in
       arg  )
 	# do not "continue".  Instead, add this to base_compile
 	lastarg="$arg"
@@ -394,24 +680,19 @@ if test -z "$show_help"; then
 	-o)
 	  if test -n "$libobj" ; then
 	    $echo "$modename: you cannot specify \`-o' more than once" 1>&2
-	    exit 1
+	    exit $EXIT_FAILURE
 	  fi
 	  arg_mode=target
 	  continue
 	  ;;
 
-	-static)
-	  build_old_libs=yes
+	-static | -prefer-pic | -prefer-non-pic)
+	  later="$later $arg"
 	  continue
 	  ;;
 
-	-prefer-pic)
-	  pic_mode=yes
-	  continue
-	  ;;
-
-	-prefer-non-pic)
-	  pic_mode=no
+	-no-suppress)
+	  suppress_opt=no
 	  continue
 	  ;;
 
@@ -424,7 +705,7 @@ if test -z "$show_help"; then
 	  args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
 	  lastarg=
 	  save_ifs="$IFS"; IFS=','
-	  for arg in $args; do
+ 	  for arg in $args; do
 	    IFS="$save_ifs"
 
 	    # Double-quote args containing other shell metacharacters.
@@ -462,7 +743,10 @@ if test -z "$show_help"; then
       case $lastarg in
       # Double-quote args containing other shell metacharacters.
       # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, so we specify it separately.
+      # in scan sets, and some SunOS ksh mistreat backslash-escaping
+      # in scan sets (worked around with variable expansion),
+      # and furthermore cannot handle '|' '&' '(' ')' in scan sets 
+      # at all, so we specify them separately.
       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	lastarg="\"$lastarg\""
 	;;
@@ -474,11 +758,11 @@ if test -z "$show_help"; then
     case $arg_mode in
     arg)
       $echo "$modename: you must specify an argument for -Xcompile"
-      exit 1
+      exit $EXIT_FAILURE
       ;;
     target)
       $echo "$modename: you must specify a target with \`-o'" 1>&2
-      exit 1
+      exit $EXIT_FAILURE
       ;;
     *)
       # Get the name of the library object.
@@ -500,9 +784,10 @@ if test -z "$show_help"; then
     *.class) xform=class ;;
     *.cpp) xform=cpp ;;
     *.cxx) xform=cxx ;;
-    *.f90) xform=f90 ;;
+    *.[fF][09]?) xform=[fF][09]. ;;
     *.for) xform=for ;;
     *.java) xform=java ;;
+    *.obj) xform=obj ;;
     esac
 
     libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
@@ -511,51 +796,39 @@ if test -z "$show_help"; then
     *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
     *)
       $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
-      exit 1
+      exit $EXIT_FAILURE
       ;;
     esac
 
-    # Infer tagged configuration to use if any are available and
-    # if one wasn't chosen via the "--tag" command line option.
-    # Only attempt this if the compiler in the base compile
-    # command doesn't match the default compiler.
-    if test -n "$available_tags" && test -z "$tagname"; then
-      case $base_compile in
-      # Blanks in the command may have been stripped by the calling shell,
-      # but not from the CC environment variable when configure was run.
-      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "*) ;;
-      # Blanks at the start of $base_compile will cause this to fail
-      # if we don't check for them as well.
-      *)
-	for z in $available_tags; do
-	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
-	    # Evaluate the configuration.
-	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
-	    case "$base_compile " in
-	    "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*)
-	      # The compiler in the base compile command matches
-	      # the one in the tagged configuration.
-	      # Assume this is the tagged configuration we want.
-	      tagname=$z
-	      break
-	      ;;
-	    esac
-	  fi
-	done
-	# If $tagname still isn't set, then no tagged configuration
-	# was found and let the user know that the "--tag" command
-	# line option must be used.
-	if test -z "$tagname"; then
-	  $echo "$modename: unable to infer tagged configuration"
-	  $echo "$modename: specify a tag with \`--tag'" 1>&2
-	  exit 1
-#        else
-#          $echo "$modename: using $tagname tagged configuration"
-	fi
+    func_infer_tag $base_compile
+
+    for arg in $later; do
+      case $arg in
+      -static)
+	build_old_libs=yes
+	continue
+	;;
+
+      -prefer-pic)
+	pic_mode=yes
+	continue
+	;;
+
+      -prefer-non-pic)
+	pic_mode=no
+	continue
 	;;
       esac
-    fi
+    done
 
+    qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
+    case $qlibobj in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	qlibobj="\"$qlibobj\"" ;;
+    esac
+    test "X$libobj" != "X$qlibobj" \
+	&& $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' 	&()|`$[]' \
+	&& $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
     objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
     xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
     if test "X$xdir" = "X$obj"; then
@@ -568,7 +841,7 @@ if test -z "$show_help"; then
     if test -z "$base_compile"; then
       $echo "$modename: you must specify a compilation command" 1>&2
       $echo "$help" 1>&2
-      exit 1
+      exit $EXIT_FAILURE
     fi
 
     # Delete any leftover library objects.
@@ -579,7 +852,7 @@ if test -z "$show_help"; then
     fi
 
     $run $rm $removelist
-    trap "$run $rm $removelist; exit 1" 1 2 15
+    trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
 
     # On Cygwin there's no "real" PIC flag so we must build both object types
     case $host_os in
@@ -598,7 +871,7 @@ if test -z "$show_help"; then
       output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
       lockfile="$output_obj.lock"
       removelist="$removelist $output_obj $lockfile"
-      trap "$run $rm $removelist; exit 1" 1 2 15
+      trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
     else
       output_obj=
       need_locks=no
@@ -608,7 +881,7 @@ if test -z "$show_help"; then
     # Lock this critical section if it is needed
     # We use this script file to make the link, it avoids creating a new file
     if test "$need_locks" = yes; then
-      until $run ln "$0" "$lockfile" 2>/dev/null; do
+      until $run ln "$progpath" "$lockfile" 2>/dev/null; do
 	$show "Waiting for $lockfile to be removed"
 	sleep 2
       done
@@ -626,14 +899,19 @@ avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 
 	$run $rm $removelist
-	exit 1
+	exit $EXIT_FAILURE
       fi
-      $echo $srcfile > "$lockfile"
+      $echo "$srcfile" > "$lockfile"
     fi
 
     if test -n "$fix_srcfile_path"; then
       eval srcfile=\"$fix_srcfile_path\"
     fi
+    qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
+    case $qsrcfile in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+      qsrcfile="\"$qsrcfile\"" ;;
+    esac
 
     $run $rm "$libobj" "${libobj}T"
 
@@ -655,18 +933,18 @@ EOF
       fbsd_hideous_sh_bug=$base_compile
 
       if test "$pic_mode" != no; then
-	command="$base_compile $srcfile $pic_flag"
+	command="$base_compile $qsrcfile $pic_flag"
       else
 	# Don't build PIC code
-	command="$base_compile $srcfile"
+	command="$base_compile $qsrcfile"
       fi
 
       if test ! -d "${xdir}$objdir"; then
 	$show "$mkdir ${xdir}$objdir"
 	$run $mkdir ${xdir}$objdir
-	status=$?
-	if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then
-	  exit $status
+	exit_status=$?
+	if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
+	  exit $exit_status
 	fi
       fi
 
@@ -681,7 +959,7 @@ EOF
       if $run eval "$command"; then :
       else
 	test -n "$output_obj" && $run $rm $removelist
-	exit 1
+	exit $EXIT_FAILURE
       fi
 
       if test "$need_locks" = warn &&
@@ -701,7 +979,7 @@ avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 
 	$run $rm $removelist
-	exit 1
+	exit $EXIT_FAILURE
       fi
 
       # Just move the object if needed, then go on to compile the next one
@@ -722,7 +1000,9 @@ pic_object='$objdir/$objname'
 EOF
 
       # Allow error messages only from the first compilation.
-      suppress_output=' >/dev/null 2>&1'
+      if test "$suppress_opt" = yes; then
+        suppress_output=' >/dev/null 2>&1'
+      fi
     else
       # No PIC object so indicate it doesn't exist in the libtool
       # object file.
@@ -736,9 +1016,9 @@ EOF
     if test "$build_old_libs" = yes; then
       if test "$pic_mode" != yes; then
 	# Don't build PIC code
-	command="$base_compile $srcfile"
+	command="$base_compile $qsrcfile"
       else
-	command="$base_compile $srcfile $pic_flag"
+	command="$base_compile $qsrcfile $pic_flag"
       fi
       if test "$compiler_c_o" = yes; then
 	command="$command -o $obj"
@@ -751,7 +1031,7 @@ EOF
       if $run eval "$command"; then :
       else
 	$run $rm $removelist
-	exit 1
+	exit $EXIT_FAILURE
       fi
 
       if test "$need_locks" = warn &&
@@ -771,7 +1051,7 @@ avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 
 	$run $rm $removelist
-	exit 1
+	exit $EXIT_FAILURE
       fi
 
       # Just move the object if needed
@@ -809,7 +1089,7 @@ EOF
       $run $rm "$lockfile"
     fi
 
-    exit 0
+    exit $EXIT_SUCCESS
     ;;
 
   # libtool link mode
@@ -835,7 +1115,7 @@ EOF
       ;;
     esac
     libtool_args="$nonopt"
-    base_compile="$nonopt"
+    base_compile="$nonopt $@"
     compile_command="$nonopt"
     finalize_command="$nonopt"
 
@@ -867,6 +1147,8 @@ EOF
     no_install=no
     objs=
     non_pic_objects=
+    notinst_path= # paths that contain not-installed libtool libraries
+    precious_files_regex=
     prefer_static_libs=no
     preload=no
     prev=
@@ -880,26 +1162,38 @@ EOF
     vinfo=
     vinfo_number=no
 
+    func_infer_tag $base_compile
+
     # We need to know -static, to get the right output filenames.
     for arg
     do
       case $arg in
-      -all-static | -static)
-	if test "X$arg" = "X-all-static"; then
+      -all-static | -static | -static-libtool-libs)
+	case $arg in
+	-all-static)
 	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
 	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
 	  fi
 	  if test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
-	else
+	  prefer_static_libs=yes
+	  ;;
+	-static)
 	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
-	fi
+	  prefer_static_libs=built
+	  ;;
+	-static-libtool-libs)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	esac
 	build_libtool_libs=no
 	build_old_libs=yes
-	prefer_static_libs=yes
 	break
 	;;
       esac
@@ -911,7 +1205,6 @@ EOF
     # Go through the arguments, transforming them on the way.
     while test "$#" -gt 0; do
       arg="$1"
-      base_compile="$base_compile $arg"
       shift
       case $arg in
       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
@@ -975,7 +1268,7 @@ EOF
 	  export_symbols="$arg"
 	  if test ! -f "$arg"; then
 	    $echo "$modename: symbol file \`$arg' does not exist"
-	    exit 1
+	    exit $EXIT_FAILURE
 	  fi
 	  prev=
 	  continue
@@ -990,6 +1283,11 @@ EOF
 	  prev=
 	  continue
 	  ;;
+	precious_regex)
+	  precious_files_regex="$arg"
+	  prev=
+	  continue
+	  ;;
 	release)
 	  release="-$arg"
 	  prev=
@@ -1022,7 +1320,7 @@ EOF
 		   test "$pic_object" = none && \
 		   test "$non_pic_object" = none; then
 		  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-		  exit 1
+		  exit $EXIT_FAILURE
 		fi
 
 		# Extract subdirectory from the argument.
@@ -1070,12 +1368,17 @@ EOF
 		  if test -z "$pic_object" || test "$pic_object" = none ; then
 		    arg="$non_pic_object"
 		  fi
+		else
+		  # If the PIC object exists, use it instead.
+		  # $xdir was prepended to $pic_object above.
+		  non_pic_object="$pic_object"
+		  non_pic_objects="$non_pic_objects $non_pic_object"
 		fi
 	      else
 		# Only an error if not doing a dry-run.
 		if test -z "$run"; then
 		  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-		  exit 1
+		  exit $EXIT_FAILURE
 		else
 		  # Dry-run case.
 
@@ -1096,7 +1399,7 @@ EOF
 	    done
 	  else
 	    $echo "$modename: link input file \`$save_arg' does not exist"
-	    exit 1
+	    exit $EXIT_FAILURE
 	  fi
 	  arg=$save_arg
 	  prev=
@@ -1108,7 +1411,7 @@ EOF
 	  [\\/]* | [A-Za-z]:[\\/]*) ;;
 	  *)
 	    $echo "$modename: only absolute run-paths are allowed" 1>&2
-	    exit 1
+	    exit $EXIT_FAILURE
 	    ;;
 	  esac
 	  if test "$prev" = rpath; then
@@ -1148,6 +1451,18 @@ EOF
 	  finalize_command="$finalize_command $qarg"
 	  continue
 	  ;;
+	shrext)
+  	  shrext_cmds="$arg"
+	  prev=
+	  continue
+	  ;;
+	darwin_framework|darwin_framework_skip)
+	  test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
+	  compile_command="$compile_command $arg"
+	  finalize_command="$finalize_command $arg"
+	  prev=
+	  continue
+	  ;;
 	*)
 	  eval "$prev=\"\$arg\""
 	  prev=
@@ -1196,7 +1511,7 @@ EOF
       -export-symbols | -export-symbols-regex)
 	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
 	  $echo "$modename: more than one -exported-symbols argument is not allowed"
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 	if test "X$arg" = "X-export-symbols"; then
 	  prev=expsyms
@@ -1206,6 +1521,18 @@ EOF
 	continue
 	;;
 
+      -framework|-arch|-isysroot)
+	case " $CC " in
+	  *" ${arg} ${1} "* | *" ${arg}	${1} "*) 
+		prev=darwin_framework_skip ;;
+	  *) compiler_flags="$compiler_flags $arg"
+	     prev=darwin_framework ;;
+	esac
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+	continue
+	;;
+
       -inst-prefix-dir)
 	prev=inst_prefix
 	continue
@@ -1232,7 +1559,8 @@ EOF
 	  absdir=`cd "$dir" && pwd`
 	  if test -z "$absdir"; then
 	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
-	    exit 1
+	    absdir="$dir"
+	    notinst_path="$notinst_path $dir"
 	  fi
 	  dir="$absdir"
 	  ;;
@@ -1246,10 +1574,15 @@ EOF
 	esac
 	case $host in
 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$dir:"*) ;;
 	  *) dllsearchpath="$dllsearchpath:$dir";;
 	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+	  esac
 	  ;;
 	esac
 	continue
@@ -1258,15 +1591,15 @@ EOF
       -l*)
 	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
 	  case $host in
-	  *-*-cygwin* | *-*-pw32* | *-*-beos*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
 	    # These systems don't actually have a C or math library (as such)
 	    continue
 	    ;;
-	  *-*-mingw* | *-*-os2*)
+	  *-*-os2*)
 	    # These systems don't actually have a C library (as such)
 	    test "X$arg" = "X-lc" && continue
 	    ;;
-	  *-*-openbsd* | *-*-freebsd*)
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 	    # Do not include libc due to us having libc/libc_r.
 	    test "X$arg" = "X-lc" && continue
 	    ;;
@@ -1274,10 +1607,19 @@ EOF
 	    # Rhapsody C and math libraries are in the System framework
 	    deplibs="$deplibs -framework System"
 	    continue
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    test "X$arg" = "X-lc" && continue
+	    ;;
 	  esac
 	elif test "X$arg" = "X-lc_r"; then
 	 case $host in
-	 *-*-openbsd* | *-*-freebsd*)
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 	   # Do not include libc_r directly, use -pthread flag.
 	   continue
 	   ;;
@@ -1287,18 +1629,42 @@ EOF
 	continue
 	;;
 
+      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+      # classes, name mangling, and exception handling.
+      -model)
+	compile_command="$compile_command $arg"
+	compiler_flags="$compiler_flags $arg"
+	finalize_command="$finalize_command $arg"
+	prev=xcompiler
+	continue
+	;;
+
+     -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+	compiler_flags="$compiler_flags $arg"
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+	continue
+	;;
+
       -module)
 	module=yes
 	continue
 	;;
 
-      # gcc -m* arguments should be passed to the linker via $compiler_flags
-      # in order to pass architecture information to the linker
-      # (e.g. 32 vs 64-bit).  This may also be accomplished via -Wl,-mfoo
-      # but this is not reliable with gcc because gcc may use -mfoo to
-      # select a different linker, different libraries, etc, while
-      # -Wl,-mfoo simply passes -mfoo to the linker.
-      -m*)
+      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+      # -r[0-9][0-9]* specifies the processor on the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+      # +DA*, +DD* enable 64-bit mode on the HP compiler
+      # -q* pass through compiler args for the IBM compiler
+      # -m* pass through architecture-specific compiler args for GCC
+      # -m*, -t[45]*, -txscale* pass through architecture-specific
+      # compiler args for GCC
+      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
+      # -F/path gives path to uninstalled frameworks, gcc on darwin
+      # @file GCC response files
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
+
 	# Unknown arguments in both finalize_command and compile_command need
 	# to be aesthetically quoted because they are evaled later.
 	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
@@ -1309,9 +1675,7 @@ EOF
 	esac
         compile_command="$compile_command $arg"
         finalize_command="$finalize_command $arg"
-        if test "$with_gcc" = "yes" ; then
-          compiler_flags="$compiler_flags $arg"
-        fi
+        compiler_flags="$compiler_flags $arg"
         continue
         ;;
 
@@ -1327,9 +1691,9 @@ EOF
 
       -no-install)
 	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*)
 	  # The PATH hackery in wrapper scripts is required on Windows
-	  # in order for the loader to find any dlls it needs.
+	  # and Darwin in order for the loader to find any dlls it needs.
 	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
 	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
 	  fast_install=no
@@ -1351,6 +1715,11 @@ EOF
 
       -o) prev=output ;;
 
+      -precious-files-regex)
+	prev=precious_regex
+	continue
+	;;
+
       -release)
 	prev=release
 	continue
@@ -1373,7 +1742,7 @@ EOF
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
 	*)
 	  $echo "$modename: only absolute run-paths are allowed" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
 	case "$xrpath " in
@@ -1383,7 +1752,7 @@ EOF
 	continue
 	;;
 
-      -static)
+      -static | -static-libtool-libs)
 	# The effects of -static are defined in a previous loop.
 	# We used to do the same as -all-static on platforms that
 	# didn't have a PIC flag, but the assumption that the effects
@@ -1496,7 +1865,7 @@ EOF
 	     test "$pic_object" = none && \
 	     test "$non_pic_object" = none; then
 	    $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-	    exit 1
+	    exit $EXIT_FAILURE
 	  fi
 
 	  # Extract subdirectory from the argument.
@@ -1544,12 +1913,17 @@ EOF
 	    if test -z "$pic_object" || test "$pic_object" = none ; then
 	      arg="$non_pic_object"
 	    fi
+	  else
+	    # If the PIC object exists, use it instead.
+	    # $xdir was prepended to $pic_object above.
+	    non_pic_object="$pic_object"
+	    non_pic_objects="$non_pic_objects $non_pic_object"
 	  fi
 	else
 	  # Only an error if not doing a dry-run.
 	  if test -z "$run"; then
 	    $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-	    exit 1
+	    exit $EXIT_FAILURE
 	  else
 	    # Dry-run case.
 
@@ -1616,48 +1990,7 @@ EOF
     if test -n "$prev"; then
       $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
       $echo "$help" 1>&2
-      exit 1
-    fi
-
-    # Infer tagged configuration to use if any are available and
-    # if one wasn't chosen via the "--tag" command line option.
-    # Only attempt this if the compiler in the base link
-    # command doesn't match the default compiler.
-    if test -n "$available_tags" && test -z "$tagname"; then
-      case $base_compile in
-      # Blanks in the command may have been stripped by the calling shell,
-      # but not from the CC environment variable when configure was run.
-      "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*) ;;
-      # Blanks at the start of $base_compile will cause this to fail
-      # if we don't check for them as well.
-      *)
-	for z in $available_tags; do
-	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
-	    # Evaluate the configuration.
-	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
-	    case $base_compile in
-	    "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*)
-	      # The compiler in $compile_command matches
-	      # the one in the tagged configuration.
-	      # Assume this is the tagged configuration we want.
-	      tagname=$z
-	      break
-	      ;;
-	    esac
-	  fi
-	done
-	# If $tagname still isn't set, then no tagged configuration
-	# was found and let the user know that the "--tag" command
-	# line option must be used.
-	if test -z "$tagname"; then
-	  $echo "$modename: unable to infer tagged configuration"
-	  $echo "$modename: specify a tag with \`--tag'" 1>&2
-	  exit 1
-#       else
-#         $echo "$modename: using $tagname tagged configuration"
-	fi
-	;;
-      esac
+      exit $EXIT_FAILURE
     fi
 
     if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
@@ -1690,9 +2023,9 @@ EOF
     if test ! -d "$output_objdir"; then
       $show "$mkdir $output_objdir"
       $run $mkdir $output_objdir
-      status=$?
-      if test "$status" -ne 0 && test ! -d "$output_objdir"; then
-	exit $status
+      exit_status=$?
+      if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
+	exit $exit_status
       fi
     fi
 
@@ -1701,7 +2034,7 @@ EOF
     "")
       $echo "$modename: you must specify an output file" 1>&2
       $echo "$help" 1>&2
-      exit 1
+      exit $EXIT_FAILURE
       ;;
     *.$libext) linkmode=oldlib ;;
     *.lo | *.$objext) linkmode=obj ;;
@@ -1711,7 +2044,7 @@ EOF
 
     case $host in
     *cygwin* | *mingw* | *pw32*)
-      # don't eliminate duplcations in $postdeps and $predeps
+      # don't eliminate duplications in $postdeps and $predeps
       duplicate_compiler_generated_deps=yes
       ;;
     *)
@@ -1755,7 +2088,6 @@ EOF
     newlib_search_path=
     need_relink=no # whether we're linking any uninstalled libtool libraries
     notinst_deplibs= # not-installed libtool libraries
-    notinst_path= # paths that contain not-installed libtool libraries
     case $linkmode in
     lib)
 	passes="conv link"
@@ -1764,7 +2096,7 @@ EOF
 	  *.la) ;;
 	  *)
 	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
-	    exit 1
+	    exit $EXIT_FAILURE
 	    ;;
 	  esac
 	done
@@ -1802,23 +2134,34 @@ EOF
 	lib=
 	found=no
 	case $deplib in
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    compiler_flags="$compiler_flags $deplib"
+	  fi
+	  continue
+	  ;;
 	-l*)
 	  if test "$linkmode" != lib && test "$linkmode" != prog; then
 	    $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
 	    continue
 	  fi
-	  if test "$pass" = conv; then
-	    deplibs="$deplib $deplibs"
-	    continue
-	  fi
 	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
 	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
-	    # Search the libtool library
-	    lib="$searchdir/lib${name}.la"
-	    if test -f "$lib"; then
-	      found=yes
-	      break
-	    fi
+	    for search_ext in .la $std_shrext .so .a; do
+	      # Search the libtool library
+	      lib="$searchdir/lib${name}${search_ext}"
+	      if test -f "$lib"; then
+		if test "$search_ext" = ".la"; then
+		  found=yes
+		else
+		  found=no
+		fi
+		break 2
+	      fi
+	    done
 	  done
 	  if test "$found" != yes; then
 	    # deplib doesn't seem to be a libtool library
@@ -1883,11 +2226,11 @@ EOF
 	    fi
 	    if test "$pass" = scan; then
 	      deplibs="$deplib $deplibs"
-	      newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
 	    else
 	      compile_deplibs="$deplib $compile_deplibs"
 	      finalize_deplibs="$deplib $finalize_deplibs"
 	    fi
+	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
 	    ;;
 	  *)
 	    $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
@@ -1915,7 +2258,22 @@ EOF
 	  fi
 	  case $linkmode in
 	  lib)
-	    if test "$deplibs_check_method" != pass_all; then
+	    valid_a_lib=no
+	    case $deplibs_check_method in
+	      match_pattern*)
+		set dummy $deplibs_check_method
+	        match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+		if eval $echo \"$deplib\" 2>/dev/null \
+		    | $SED 10q \
+		    | $EGREP "$match_pattern_regex" > /dev/null; then
+		  valid_a_lib=yes
+		fi
+		;;
+	      pass_all)
+		valid_a_lib=yes
+		;;
+            esac
+	    if test "$valid_a_lib" != yes; then
 	      $echo
 	      $echo "*** Warning: Trying to link with static lib archive $deplib."
 	      $echo "*** I have the capability to make that library automatically link in when"
@@ -1965,15 +2323,15 @@ EOF
 	esac # case $deplib
 	if test "$found" = yes || test -f "$lib"; then :
 	else
-	  $echo "$modename: cannot find the library \`$lib'" 1>&2
-	  exit 1
+	  $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
+	  exit $EXIT_FAILURE
 	fi
 
 	# Check to see that this really is a libtool archive.
 	if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
 	else
 	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 
 	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
@@ -1989,6 +2347,8 @@ EOF
 	# it will not redefine variables installed, or shouldnotlink
 	installed=yes
 	shouldnotlink=no
+	avoidtemprpath=
+
 
 	# Read the .la file
 	case $lib in
@@ -2009,7 +2369,7 @@ EOF
 	  if test -z "$libdir"; then
 	    if test -z "$old_library"; then
 	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	      exit 1
+	      exit $EXIT_FAILURE
 	    fi
 	    # It is a libtool convenience library, so add in its objects.
 	    convenience="$convenience $ladir/$objdir/$old_library"
@@ -2026,12 +2386,12 @@ EOF
 	    done
 	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
 	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
-	    exit 1
+	    exit $EXIT_FAILURE
 	  fi
 	  continue
 	fi # $pass = conv
 
-    
+
 	# Get the name of the library we link against.
 	linklib=
 	for l in $old_library $library_names; do
@@ -2039,16 +2399,18 @@ EOF
 	done
 	if test -z "$linklib"; then
 	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 
 	# This library was specified with -dlopen.
 	if test "$pass" = dlopen; then
 	  if test -z "$libdir"; then
 	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
-	    exit 1
+	    exit $EXIT_FAILURE
 	  fi
-	  if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	  if test -z "$dlname" ||
+	     test "$dlopen_support" != yes ||
+	     test "$build_libtool_libs" = no; then
 	    # If there is no dlname, no dlopen support or we're linking
 	    # statically, we need to preload.  We also need to preload any
 	    # dependent libraries so libltdl's deplib preloader doesn't
@@ -2085,11 +2447,19 @@ EOF
 	    dir="$libdir"
 	    absdir="$libdir"
 	  fi
+	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
 	else
-	  dir="$ladir/$objdir"
-	  absdir="$abs_ladir/$objdir"
-	  # Remove this search path later
-	  notinst_path="$notinst_path $abs_ladir"
+	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    # Remove this search path later
+	    notinst_path="$notinst_path $abs_ladir"
+	  else
+	    dir="$ladir/$objdir"
+	    absdir="$abs_ladir/$objdir"
+	    # Remove this search path later
+	    notinst_path="$notinst_path $abs_ladir"
+	  fi
 	fi # $installed = yes
 	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
 
@@ -2097,7 +2467,7 @@ EOF
 	if test "$pass" = dlpreopen; then
 	  if test -z "$libdir"; then
 	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
-	    exit 1
+	    exit $EXIT_FAILURE
 	  fi
 	  # Prefer using a static library (so that no silly _DYNAMIC symbols
 	  # are required to link).
@@ -2124,7 +2494,7 @@ EOF
 	  continue
 	fi
 
-    
+
 	if test "$linkmode" = prog && test "$pass" != link; then
 	  newlib_search_path="$newlib_search_path $ladir"
 	  deplibs="$lib $deplibs"
@@ -2160,14 +2530,16 @@ EOF
 
 	if test "$linkmode,$pass" = "prog,link"; then
 	  if test -n "$library_names" &&
-	     { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+	     { { test "$prefer_static_libs" = no ||
+		 test "$prefer_static_libs,$installed" = "built,yes"; } ||
+	       test -z "$old_library"; }; then
 	    # We need to hardcode the library path
-	    if test -n "$shlibpath_var"; then
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
 	      # Make sure the rpath contains only unique directories.
 	      case "$temp_rpath " in
 	      *" $dir "*) ;;
 	      *" $absdir "*) ;;
-	      *) temp_rpath="$temp_rpath $dir" ;;
+	      *) temp_rpath="$temp_rpath $absdir" ;;
 	      esac
 	    fi
 
@@ -2204,24 +2576,29 @@ EOF
 	fi
 
 	link_static=no # Whether the deplib will be linked statically
+	use_static_libs=$prefer_static_libs
+	if test "$use_static_libs" = built && test "$installed" = yes ; then
+	  use_static_libs=no
+	fi
 	if test -n "$library_names" &&
-	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
 	  if test "$installed" = no; then
 	    notinst_deplibs="$notinst_deplibs $lib"
 	    need_relink=yes
 	  fi
 	  # This is a shared library
-	
-      # Warn about portability, can't link against -module's on some systems (darwin)
-      if test "$shouldnotlink" = yes && test "$pass" = link ; then
+
+	  # Warn about portability, can't link against -module's on
+	  # some systems (darwin)
+	  if test "$shouldnotlink" = yes && test "$pass" = link ; then
 	    $echo
 	    if test "$linkmode" = prog; then
 	      $echo "*** Warning: Linking the executable $output against the loadable module"
 	    else
 	      $echo "*** Warning: Linking the shared library $output against the loadable module"
 	    fi
-	    $echo "*** $linklib is not portable!"    
-      fi	  
+	    $echo "*** $linklib is not portable!"
+	  fi
 	  if test "$linkmode" = lib &&
 	     test "$hardcode_into_libs" = yes; then
 	    # Hardcode the library path.
@@ -2279,9 +2656,10 @@ EOF
 	    else
 	      $show "extracting exported symbol list from \`$soname'"
 	      save_ifs="$IFS"; IFS='~'
-	      eval cmds=\"$extract_expsyms_cmds\"
+	      cmds=$extract_expsyms_cmds
 	      for cmd in $cmds; do
 		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
 		$show "$cmd"
 		$run eval "$cmd" || exit $?
 	      done
@@ -2292,9 +2670,10 @@ EOF
 	    if test -f "$output_objdir/$newlib"; then :; else
 	      $show "generating import library for \`$soname'"
 	      save_ifs="$IFS"; IFS='~'
-	      eval cmds=\"$old_archive_from_expsyms_cmds\"
+	      cmds=$old_archive_from_expsyms_cmds
 	      for cmd in $cmds; do
 		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
 		$show "$cmd"
 		$run eval "$cmd" || exit $?
 	      done
@@ -2315,11 +2694,15 @@ EOF
 	      if test "$hardcode_direct" = no; then
 		add="$dir/$linklib"
 		case $host in
-		  *-*-sco3.2v5* ) add_dir="-L$dir" ;;
+		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+		    *-*-unixware7*) add_dir="-L$dir" ;;
 		  *-*-darwin* )
-		    # if the lib is a module then we can not link against it, someone
-		    # is ignoring the new warnings I added
-		    if /usr/bin/file -L $add 2> /dev/null | grep "bundle" >/dev/null ; then
+		    # if the lib is a module then we can not link against
+		    # it, someone is ignoring the new warnings I added
+		    if /usr/bin/file -L $add 2> /dev/null |
+                      $EGREP ": [^:]* bundle" >/dev/null ; then
 		      $echo "** Warning, lib $linklib is a module, not a shared library"
 		      if test -z "$old_library" ; then
 		        $echo
@@ -2327,7 +2710,7 @@ EOF
 		        $echo "** The link will probably fail, sorry"
 		      else
 		        add="$dir/$old_library"
-		      fi 
+		      fi
 		    fi
 		esac
 	      elif test "$hardcode_minus_L" = no; then
@@ -2350,9 +2733,9 @@ EOF
 		add_dir="-L$dir"
 		# Try looking first in the location we're being installed to.
 		if test -n "$inst_prefix_dir"; then
-		  case "$libdir" in
+		  case $libdir in
 		    [\\/]*)
-		      add_dir="-L$inst_prefix_dir$libdir $add_dir"
+		      add_dir="$add_dir -L$inst_prefix_dir$libdir"
 		      ;;
 		  esac
 		fi
@@ -2369,7 +2752,7 @@ EOF
 
 	    if test "$lib_linked" != yes; then
 	      $echo "$modename: configuration error: unsupported hardcode properties"
-	      exit 1
+	      exit $EXIT_FAILURE
 	    fi
 
 	    if test -n "$add_shlibpath"; then
@@ -2412,7 +2795,8 @@ EOF
 	      esac
 	      add="-l$name"
 	    elif test "$hardcode_automatic" = yes; then
-	      if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then
+	      if test -n "$inst_prefix_dir" &&
+		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
 	        add="$inst_prefix_dir$libdir/$linklib"
 	      else
 	        add="$libdir/$linklib"
@@ -2422,9 +2806,9 @@ EOF
 	      add_dir="-L$libdir"
 	      # Try looking first in the location we're being installed to.
 	      if test -n "$inst_prefix_dir"; then
-		case "$libdir" in
+		case $libdir in
 		  [\\/]*)
-		    add_dir="-L$inst_prefix_dir$libdir $add_dir"
+		    add_dir="$add_dir -L$inst_prefix_dir$libdir"
 		    ;;
 		esac
 	      fi
@@ -2483,8 +2867,6 @@ EOF
 	      fi
 	    fi
 	  else
-	    convenience="$convenience $dir/$old_library"
-	    old_convenience="$old_convenience $dir/$old_library"
 	    deplibs="$dir/$old_library $deplibs"
 	    link_static=yes
 	  fi
@@ -2492,7 +2874,8 @@ EOF
 
 	if test "$linkmode" = lib; then
 	  if test -n "$dependency_libs" &&
-	     { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes ||
+	     { test "$hardcode_into_libs" != yes ||
+	       test "$build_old_libs" = yes ||
 	       test "$link_static" = yes; }; then
 	    # Extract -R from dependency_libs
 	    temp_deplibs=
@@ -2549,7 +2932,7 @@ EOF
 		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
 		  if test -z "$libdir"; then
 		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		    exit 1
+		    exit $EXIT_FAILURE
 		  fi
 		  if test "$absdir" != "$libdir"; then
 		    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
@@ -2559,7 +2942,8 @@ EOF
 		depdepl=
 		case $host in
 		*-*-darwin*)
-		  # we do not want to link against static libs, but need to link against shared
+		  # we do not want to link against static libs,
+		  # but need to link against shared
 		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
 		  if test -n "$deplibrary_names" ; then
 		    for tmp in $deplibrary_names ; do
@@ -2567,42 +2951,45 @@ EOF
 		    done
 		    if test -f "$path/$depdepl" ; then
 		      depdepl="$path/$depdepl"
-		   fi
-		    newlib_search_path="$newlib_search_path $path"
-		    path=""
+		    fi
+		    # do not add paths which are already there
+		    case " $newlib_search_path " in
+		    *" $path "*) ;;
+		    *) newlib_search_path="$newlib_search_path $path";;
+		    esac
 		  fi
+		  path=""
 		  ;;
 		*)
-		path="-L$path"
+		  path="-L$path"
+		  ;;
+		esac
 		;;
-		esac 
-		
-		;;
-		  -l*)
+	      -l*)
 		case $host in
 		*-*-darwin*)
-		 # Again, we only want to link against shared libraries
-		 eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
-		 for tmp in $newlib_search_path ; do
-		     if test -f "$tmp/lib$tmp_libs.dylib" ; then
-		       eval depdepl="$tmp/lib$tmp_libs.dylib"
-		       break
-		     fi  
-         done
-         path=""
+		  # Again, we only want to link against shared libraries
+		  eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
+		  for tmp in $newlib_search_path ; do
+		    if test -f "$tmp/lib$tmp_libs.dylib" ; then
+		      eval depdepl="$tmp/lib$tmp_libs.dylib"
+		      break
+		    fi
+		  done
+		  path=""
 		  ;;
 		*) continue ;;
-		esac  		  
+		esac
 		;;
 	      *) continue ;;
 	      esac
 	      case " $deplibs " in
-	      *" $depdepl "*) ;;
-	      *) deplibs="$deplibs $depdepl" ;;
-	      esac	      
-	      case " $deplibs " in
 	      *" $path "*) ;;
-	      *) deplibs="$deplibs $path" ;;
+	      *) deplibs="$path $deplibs" ;;
+	      esac
+	      case " $deplibs " in
+	      *" $depdepl "*) ;;
+	      *) deplibs="$depdepl $deplibs" ;;
 	      esac
 	    done
 	  fi # link_all_deplibs != no
@@ -2689,7 +3076,8 @@ EOF
 	  eval $var=\"$tmp_libs\"
 	done # for var
       fi
-      # Last step: remove runtime libs from dependency_libs (they stay in deplibs)
+      # Last step: remove runtime libs from dependency_libs
+      # (they stay in deplibs)
       tmp_libs=
       for i in $dependency_libs ; do
 	case " $predeps $postdeps $compiler_lib_search_path " in
@@ -2749,19 +3137,19 @@ EOF
       case $outputname in
       lib*)
 	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-	eval shared_ext=\"$shrext\"
+	eval shared_ext=\"$shrext_cmds\"
 	eval libname=\"$libname_spec\"
 	;;
       *)
 	if test "$module" = no; then
 	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
 	  $echo "$help" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 	if test "$need_lib_prefix" != no; then
 	  # Add the "lib" prefix for modules if required
 	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-	  eval shared_ext=\"$shrext\"
+	  eval shared_ext=\"$shrext_cmds\"
 	  eval libname=\"$libname_spec\"
 	else
 	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
@@ -2772,7 +3160,7 @@ EOF
       if test -n "$objs"; then
 	if test "$deplibs_check_method" != pass_all; then
 	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
-	  exit 1
+	  exit $EXIT_FAILURE
 	else
 	  $echo
 	  $echo "*** Warning: Linking the shared library $output against the non-libtool"
@@ -2820,13 +3208,13 @@ EOF
 	if test -n "$8"; then
 	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
 	  $echo "$help" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 
 	# convert absolute version numbers to libtool ages
 	# this retains compatibility with .la files and attempts
 	# to make the code below a bit more comprehensible
-	
+
 	case $vinfo_number in
 	yes)
 	  number_major="$2"
@@ -2840,7 +3228,7 @@ EOF
 	  # which has an extra 1 added just for fun
 	  #
 	  case $version_type in
-	  darwin|linux|osf|windows)
+	  darwin|linux|osf|windows|none)
 	    current=`expr $number_major + $number_minor`
 	    age="$number_minor"
 	    revision="$number_revision"
@@ -2851,9 +3239,10 @@ EOF
 	    age="0"
 	    ;;
 	  irix|nonstopux)
-	    current=`expr $number_major + $number_minor - 1`
+	    current=`expr $number_major + $number_minor`
 	    age="$number_minor"
 	    revision="$number_minor"
+	    lt_irix_increment=no
 	    ;;
 	  esac
 	  ;;
@@ -2866,36 +3255,36 @@ EOF
 
 	# Check that each of the things are valid numbers.
 	case $current in
-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
+	  $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
 
 	case $revision in
-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
+	  $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
 
 	case $age in
-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+	  $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
 
 	if test "$age" -gt "$current"; then
 	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 
 	# Calculate the version variables.
@@ -2912,6 +3301,7 @@ EOF
 	  versuffix="$major.$age.$revision"
 	  # Darwin ld doesn't like 0 for these options...
 	  minor_current=`expr $current + 1`
+	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
 	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
 	  ;;
 
@@ -2926,8 +3316,11 @@ EOF
 	  ;;
 
 	irix | nonstopux)
-	  major=`expr $current - $age + 1`
-
+	  if test "X$lt_irix_increment" = "Xno"; then
+	    major=`expr $current - $age`
+	  else
+	    major=`expr $current - $age + 1`
+	  fi
 	  case $version_type in
 	    nonstopux) verstring_prefix=nonstopux ;;
 	    *)         verstring_prefix=sgi ;;
@@ -2984,7 +3377,7 @@ EOF
 	*)
 	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
 	  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
 
@@ -3038,6 +3431,12 @@ EOF
 	    *.$objext)
 	       ;;
 	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+	       if test "X$precious_files_regex" != "X"; then
+	         if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+	         then
+		   continue
+		 fi
+	       fi
 	       removelist="$removelist $p"
 	       ;;
 	    *) ;;
@@ -3058,11 +3457,11 @@ EOF
       fi
 
       # Eliminate all temporary directories.
-      for path in $notinst_path; do
-	lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
-	deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
-	dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
-      done
+      #for path in $notinst_path; do
+      #	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+      #	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+      #	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
+      #done
 
       if test -n "$xrpath"; then
 	# If the user specified any rpath flags, then add them.
@@ -3112,9 +3511,14 @@ EOF
 	  *-*-netbsd*)
 	    # Don't link with libc until the a.out ld.so is fixed.
 	    ;;
-	  *-*-openbsd* | *-*-freebsd*)
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 	    # Do not include libc due to us having libc/libc_r.
-	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
 	    ;;
  	  *)
 	    # Add libc to deplibs on all other systems if necessary.
@@ -3158,13 +3562,12 @@ EOF
 	  int main() { return 0; }
 EOF
 	  $rm conftest
-	  $LTCC -o conftest conftest.c $deplibs
-	  if test "$?" -eq 0 ; then
+	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
 	    ldd_output=`ldd conftest`
 	    for i in $deplibs; do
-	      name="`expr $i : '-l\(.*\)'`"
+	      name=`expr $i : '-l\(.*\)'`
 	      # If $name is empty we are operating on a -L argument.
-              if test "$name" != "" && test "$name" -ne "0"; then
+              if test "$name" != "" && test "$name" != "0"; then
 		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		  case " $predeps $postdeps " in
 		  *" $i "*)
@@ -3199,13 +3602,11 @@ EOF
 	    # Error occurred in the first compile.  Let's try to salvage
 	    # the situation: Compile a separate program for each library.
 	    for i in $deplibs; do
-	      name="`expr $i : '-l\(.*\)'`"
+	      name=`expr $i : '-l\(.*\)'`
 	      # If $name is empty we are operating on a -L argument.
               if test "$name" != "" && test "$name" != "0"; then
 		$rm conftest
-		$LTCC -o conftest conftest.c $i
-		# Did it work?
-		if test "$?" -eq 0 ; then
+		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
 		  ldd_output=`ldd conftest`
 		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		    case " $predeps $postdeps " in
@@ -3237,7 +3638,7 @@ EOF
 		  droppeddeps=yes
 		  $echo
 		  $echo "*** Warning!  Library $i is needed by this library but I was not able to"
-		  $echo "***  make it link in!  You will probably need to install it or some"
+		  $echo "*** make it link in!  You will probably need to install it or some"
 		  $echo "*** library that it depends on before this library will be fully"
 		  $echo "*** functional.  Installing it before continuing would be even better."
 		fi
@@ -3251,7 +3652,7 @@ EOF
 	  set dummy $deplibs_check_method
 	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
 	  for a_deplib in $deplibs; do
-	    name="`expr $a_deplib : '-l\(.*\)'`"
+	    name=`expr $a_deplib : '-l\(.*\)'`
 	    # If $name is empty we are operating on a -L argument.
             if test "$name" != "" && test  "$name" != "0"; then
 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
@@ -3320,7 +3721,7 @@ EOF
 	  set dummy $deplibs_check_method
 	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
 	  for a_deplib in $deplibs; do
-	    name="`expr $a_deplib : '-l\(.*\)'`"
+	    name=`expr $a_deplib : '-l\(.*\)'`
 	    # If $name is empty we are operating on a -L argument.
 	    if test -n "$name" && test "$name" != "0"; then
 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
@@ -3450,6 +3851,35 @@ EOF
 	deplibs=$newdeplibs
       fi
 
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $deplibs " in
+	  *" -L$path/$objdir "*)
+	    new_libs="$new_libs -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) new_libs="$new_libs $deplib" ;;
+	  esac
+	  ;;
+	*) new_libs="$new_libs $deplib" ;;
+	esac
+      done
+      deplibs="$new_libs"
+
+
       # All the library-specific variables (install_libdir is set above).
       library_names=
       old_library=
@@ -3494,7 +3924,10 @@ EOF
 	     test -n "$hardcode_libdirs"; then
 	    libdir="$hardcode_libdirs"
 	    if test -n "$hardcode_libdir_flag_spec_ld"; then
-	      eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
+	      case $archive_cmds in
+	      *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;;
+	      *)      eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;;
+	      esac
 	    else
 	      eval dep_rpath=\"$hardcode_libdir_flag_spec\"
 	    fi
@@ -3517,7 +3950,7 @@ EOF
 	fi
 
 	# Get the real and link names of the library.
-	eval shared_ext=\"$shrext\"
+	eval shared_ext=\"$shrext_cmds\"
 	eval library_names=\"$library_names_spec\"
 	set dummy $library_names
 	realname="$2"
@@ -3533,6 +3966,7 @@ EOF
 	fi
 
 	lib="$output_objdir/$realname"
+	linknames=
 	for link
 	do
 	  linknames="$linknames $link"
@@ -3547,10 +3981,11 @@ EOF
 	    $show "generating symbol list for \`$libname.la'"
 	    export_symbols="$output_objdir/$libname.exp"
 	    $run $rm $export_symbols
-	    eval cmds=\"$export_symbols_cmds\"
+	    cmds=$export_symbols_cmds
 	    save_ifs="$IFS"; IFS='~'
 	    for cmd in $cmds; do
 	      IFS="$save_ifs"
+	      eval cmd=\"$cmd\"
 	      if len=`expr "X$cmd" : ".*"` &&
 	       test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
 	        $show "$cmd"
@@ -3560,6 +3995,9 @@ EOF
 	        # The command line is too long to execute in one step.
 	        $show "using reloadable object file for export list..."
 	        skipped_export=:
+		# Break out early, otherwise skipped_export may be
+		# set to false by a later but shorter cmd.
+		break
 	      fi
 	    done
 	    IFS="$save_ifs"
@@ -3580,12 +4018,12 @@ EOF
 	for test_deplib in $deplibs; do
 		case " $convenience " in
 		*" $test_deplib "*) ;;
-		*) 
+		*)
 			tmp_deplibs="$tmp_deplibs $test_deplib"
 			;;
 		esac
 	done
-	deplibs="$tmp_deplibs" 
+	deplibs="$tmp_deplibs"
 
 	if test -n "$convenience"; then
 	  if test -n "$whole_archive_flag_spec"; then
@@ -3593,67 +4031,13 @@ EOF
 	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
 	  else
 	    gentop="$output_objdir/${outputname}x"
-	    $show "${rm}r $gentop"
-	    $run ${rm}r "$gentop"
-	    $show "$mkdir $gentop"
-	    $run $mkdir "$gentop"
-	    status=$?
-	    if test "$status" -ne 0 && test ! -d "$gentop"; then
-	      exit $status
-	    fi
 	    generated="$generated $gentop"
 
-	    for xlib in $convenience; do
-	      # Extract the objects.
-	      case $xlib in
-	      [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	      *) xabs=`pwd`"/$xlib" ;;
-	      esac
-	      xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	      xdir="$gentop/$xlib"
-
-	      $show "${rm}r $xdir"
-	      $run ${rm}r "$xdir"
-	      $show "$mkdir $xdir"
-	      $run $mkdir "$xdir"
-	      status=$?
-	      if test "$status" -ne 0 && test ! -d "$xdir"; then
-		exit $status
-	      fi
-	      # We will extract separately just the conflicting names and we will no
-	      # longer touch any unique names. It is faster to leave these extract
-	      # automatically by $AR in one run.
-	      $show "(cd $xdir && $AR x $xabs)"
-	      $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-	      if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
-		:
-	      else
-		$echo "$modename: warning: object name conflicts; renaming object files" 1>&2
-		$echo "$modename: warning: to ensure that they will not overwrite" 1>&2
-		$AR t "$xabs" | sort | uniq -cd | while read -r count name
-		do
-		  i=1
-		  while test "$i" -le "$count"
-		  do
-		   # Put our $i before any first dot (extension)
-		   # Never overwrite any file
-		   name_to="$name"
-		   while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
-		   do
-		     name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
-		   done
-		   $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
-		   $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
-		   i=`expr $i + 1`
-		  done
-		done
-	      fi
-
-	      libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-	    done
+	    func_extract_archives $gentop $convenience
+	    libobjs="$libobjs $func_extract_archives_result"
 	  fi
 	fi
-
+	
 	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
 	  eval flag=\"$thread_safe_flag_spec\"
 	  linker_flags="$linker_flags $flag"
@@ -3667,19 +4051,24 @@ EOF
 	# Do each of the archive commands.
 	if test "$module" = yes && test -n "$module_cmds" ; then
 	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
-	    eval cmds=\"$module_expsym_cmds\"
+	    eval test_cmds=\"$module_expsym_cmds\"
+	    cmds=$module_expsym_cmds
 	  else
-	    eval cmds=\"$module_cmds\"
+	    eval test_cmds=\"$module_cmds\"
+	    cmds=$module_cmds
 	  fi
 	else
 	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	  eval cmds=\"$archive_expsym_cmds\"
+	  eval test_cmds=\"$archive_expsym_cmds\"
+	  cmds=$archive_expsym_cmds
 	else
-	  eval cmds=\"$archive_cmds\"
+	  eval test_cmds=\"$archive_cmds\"
+	  cmds=$archive_cmds
 	  fi
 	fi
 
-	if test "X$skipped_export" != "X:" && len=`expr "X$cmds" : ".*"` &&
+	if test "X$skipped_export" != "X:" &&
+	   len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
 	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
 	  :
 	else
@@ -3698,6 +4087,7 @@ EOF
 	    save_libobjs=$libobjs
 	  fi
 	  save_output=$output
+	  output_la=`$echo "X$output" | $Xsed -e "$basename"`
 
 	  # Clear the reloadable object creation command queue and
 	  # initialize k to one.
@@ -3707,13 +4097,13 @@ EOF
 	  delfiles=
 	  last_robj=
 	  k=1
-	  output=$output_objdir/$save_output-${k}.$objext
+	  output=$output_objdir/$output_la-${k}.$objext
 	  # Loop over the list of objects to be linked.
 	  for obj in $save_libobjs
 	  do
 	    eval test_cmds=\"$reload_cmds $objlist $last_robj\"
 	    if test "X$objlist" = X ||
-	       { len=`expr "X$test_cmds" : ".*"` &&
+	       { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
 		 test "$len" -le "$max_cmd_len"; }; then
 	      objlist="$objlist $obj"
 	    else
@@ -3727,9 +4117,9 @@ EOF
 		# the last one created.
 		eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
 	      fi
-	      last_robj=$output_objdir/$save_output-${k}.$objext
+	      last_robj=$output_objdir/$output_la-${k}.$objext
 	      k=`expr $k + 1`
-	      output=$output_objdir/$save_output-${k}.$objext
+	      output=$output_objdir/$output_la-${k}.$objext
 	      objlist=$obj
 	      len=1
 	    fi
@@ -3749,13 +4139,13 @@ EOF
 	    eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
           fi
 
-	  # Set up a command to remove the reloadale object files
+	  # Set up a command to remove the reloadable object files
 	  # after they are used.
 	  i=0
 	  while test "$i" -lt "$k"
 	  do
 	    i=`expr $i + 1`
-	    delfiles="$delfiles $output_objdir/$save_output-${i}.$objext"
+	    delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
 	  done
 
 	  $echo "creating a temporary reloadable object file: $output"
@@ -3780,28 +4170,54 @@ EOF
 	  # value of $libobjs for piecewise linking.
 
 	  # Do each of the archive commands.
-	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	    eval cmds=\"$archive_expsym_cmds\"
+	  if test "$module" = yes && test -n "$module_cmds" ; then
+	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	      cmds=$module_expsym_cmds
+	    else
+	      cmds=$module_cmds
+	    fi
 	  else
-	    eval cmds=\"$archive_cmds\"
+	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	    cmds=$archive_expsym_cmds
+	  else
+	    cmds=$archive_cmds
+	    fi
 	  fi
 
 	  # Append the command to remove the reloadable object files
 	  # to the just-reset $cmds.
-	  eval cmds=\"\$cmds~$rm $delfiles\"
+	  eval cmds=\"\$cmds~\$rm $delfiles\"
 	fi
 	save_ifs="$IFS"; IFS='~'
 	for cmd in $cmds; do
 	  IFS="$save_ifs"
+	  eval cmd=\"$cmd\"
 	  $show "$cmd"
-	  $run eval "$cmd" || exit $?
+	  $run eval "$cmd" || {
+	    lt_exit=$?
+
+	    # Restore the uninstalled library and exit
+	    if test "$mode" = relink; then
+	      $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+	    fi
+
+	    exit $lt_exit
+	  }
 	done
 	IFS="$save_ifs"
 
 	# Restore the uninstalled library and exit
 	if test "$mode" = relink; then
 	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
-	  exit 0
+
+	  if test -n "$convenience"; then
+	    if test -z "$whole_archive_flag_spec"; then
+	      $show "${rm}r $gentop"
+	      $run ${rm}r "$gentop"
+	    fi
+	  fi
+
+	  exit $EXIT_SUCCESS
 	fi
 
 	# Create links to the real library.
@@ -3849,7 +4265,7 @@ EOF
       *.lo)
 	if test -n "$objs$old_deplibs"; then
 	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 	libobj="$output"
 	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
@@ -3870,72 +4286,20 @@ EOF
       reload_conv_objs=
       gentop=
       # reload_cmds runs $LD directly, so let us get rid of
-      # -Wl from whole_archive_flag_spec
+      # -Wl from whole_archive_flag_spec and hope we can get by with
+      # turning comma into space..
       wl=
 
       if test -n "$convenience"; then
 	if test -n "$whole_archive_flag_spec"; then
-	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+	  reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
 	else
 	  gentop="$output_objdir/${obj}x"
-	  $show "${rm}r $gentop"
-	  $run ${rm}r "$gentop"
-	  $show "$mkdir $gentop"
-	  $run $mkdir "$gentop"
-	  status=$?
-	  if test "$status" -ne 0 && test ! -d "$gentop"; then
-	    exit $status
-	  fi
 	  generated="$generated $gentop"
 
-	  for xlib in $convenience; do
-	    # Extract the objects.
-	    case $xlib in
-	    [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	    *) xabs=`pwd`"/$xlib" ;;
-	    esac
-	    xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	    xdir="$gentop/$xlib"
-
-	    $show "${rm}r $xdir"
-	    $run ${rm}r "$xdir"
-	    $show "$mkdir $xdir"
-	    $run $mkdir "$xdir"
-	    status=$?
-	    if test "$status" -ne 0 && test ! -d "$xdir"; then
-	      exit $status
-	    fi
-	    # We will extract separately just the conflicting names and we will no
-	    # longer touch any unique names. It is faster to leave these extract
-	    # automatically by $AR in one run.
-	    $show "(cd $xdir && $AR x $xabs)"
-	    $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-	    if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
-	      :
-	    else
-	      $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
-	      $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
-	      $AR t "$xabs" | sort | uniq -cd | while read -r count name
-	      do
-		i=1
-		while test "$i" -le "$count"
-		do
-		 # Put our $i before any first dot (extension)
-		 # Never overwrite any file
-		 name_to="$name"
-		 while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
-		 do
-		   name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
-		 done
-		 $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
-		 $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
-		 i=`expr $i + 1`
-		done
-	      done
-	    fi
-
-	    reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-	  done
+	  func_extract_archives $gentop $convenience
+	  reload_conv_objs="$reload_objs $func_extract_archives_result"
 	fi
       fi
 
@@ -3943,10 +4307,11 @@ EOF
       reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
 
       output="$obj"
-      eval cmds=\"$reload_cmds\"
+      cmds=$reload_cmds
       save_ifs="$IFS"; IFS='~'
       for cmd in $cmds; do
 	IFS="$save_ifs"
+	eval cmd=\"$cmd\"
 	$show "$cmd"
 	$run eval "$cmd" || exit $?
       done
@@ -3959,7 +4324,7 @@ EOF
 	  $run ${rm}r $gentop
 	fi
 
-	exit 0
+	exit $EXIT_SUCCESS
       fi
 
       if test "$build_libtool_libs" != yes; then
@@ -3972,17 +4337,18 @@ EOF
 	# accidentally link it into a program.
 	# $show "echo timestamp > $libobj"
 	# $run eval "echo timestamp > $libobj" || exit $?
-	exit 0
+	exit $EXIT_SUCCESS
       fi
 
       if test -n "$pic_flag" || test "$pic_mode" != default; then
 	# Only do commands if we really have different PIC objects.
 	reload_objs="$libobjs $reload_conv_objs"
 	output="$libobj"
-	eval cmds=\"$reload_cmds\"
+	cmds=$reload_cmds
 	save_ifs="$IFS"; IFS='~'
 	for cmd in $cmds; do
 	  IFS="$save_ifs"
+	  eval cmd=\"$cmd\"
 	  $show "$cmd"
 	  $run eval "$cmd" || exit $?
 	done
@@ -3994,7 +4360,7 @@ EOF
 	$run ${rm}r $gentop
       fi
 
-      exit 0
+      exit $EXIT_SUCCESS
       ;;
 
     prog)
@@ -4034,6 +4400,35 @@ EOF
         ;;
       esac
 
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $compile_deplibs " in
+	  *" -L$path/$objdir "*)
+	    new_libs="$new_libs -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $compile_deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) new_libs="$new_libs $deplib" ;;
+	  esac
+	  ;;
+	*) new_libs="$new_libs $deplib" ;;
+	esac
+      done
+      compile_deplibs="$new_libs"
+
+
       compile_command="$compile_command $compile_deplibs"
       finalize_command="$finalize_command $finalize_deplibs"
 
@@ -4078,10 +4473,15 @@ EOF
 	fi
 	case $host in
 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$libdir:"*) ;;
 	  *) dllsearchpath="$dllsearchpath:$libdir";;
 	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+	  esac
 	  ;;
 	esac
       done
@@ -4195,13 +4595,25 @@ extern \"C\" {
 
 	    # Prepare the list of exported symbols
 	    if test -z "$export_symbols"; then
-	      export_symbols="$output_objdir/$output.exp"
+	      export_symbols="$output_objdir/$outputname.exp"
 	      $run $rm $export_symbols
-	      $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+              case $host in
+              *cygwin* | *mingw* )
+	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+		$run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+                ;;
+              esac
 	    else
-	      $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
-	      $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
+	      $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
 	      $run eval 'mv "$nlist"T "$nlist"'
+              case $host in
+              *cygwin* | *mingw* )
+	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+		$run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+                ;;
+              esac
 	    fi
 	  fi
 
@@ -4252,7 +4664,26 @@ extern \"C\" {
 #endif
 
 /* The mapping between symbol names and symbols. */
+"
+
+	    case $host in
+	    *cygwin* | *mingw* )
+	  $echo >> "$output_objdir/$dlsyms" "\
+/* DATA imports from DLLs on WIN32 can't be const, because
+   runtime relocations are performed -- see ld's documentation
+   on pseudo-relocs */
+struct {
+"
+	      ;;
+	    * )
+	  $echo >> "$output_objdir/$dlsyms" "\
 const struct {
+"
+	      ;;
+	    esac
+
+
+	  $echo >> "$output_objdir/$dlsyms" "\
   const char *name;
   lt_ptr address;
 }
@@ -4299,20 +4730,33 @@ static const void *lt_preloaded_setup() {
 	  esac
 
 	  # Now compile the dynamic symbol file.
-	  $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-	  $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+	  $show "(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+	  $run eval '(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
 
 	  # Clean up the generated files.
 	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
 	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
 
 	  # Transform the symbol file into the correct name.
-	  compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-	  finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+          case $host in
+          *cygwin* | *mingw* )
+            if test -f "$output_objdir/${outputname}.def" ; then
+              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
+              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
+            else
+              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+             fi
+            ;;
+          * )
+            compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+            finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+            ;;
+          esac
 	  ;;
 	*)
 	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
       else
@@ -4321,19 +4765,19 @@ static const void *lt_preloaded_setup() {
 	# really was required.
 
 	# Nullify the symbol file.
-	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
+	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
       fi
 
       if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
 	# Replace the output file specification.
-	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`
 	link_command="$compile_command$compile_rpath"
 
 	# We have no uninstalled library dependencies, so finalize right now.
 	$show "$link_command"
 	$run eval "$link_command"
-	status=$?
+	exit_status=$?
 
 	# Delete the generated files.
 	if test -n "$dlsyms"; then
@@ -4341,7 +4785,7 @@ static const void *lt_preloaded_setup() {
 	  $run $rm "$output_objdir/${outputname}S.${objext}"
 	fi
 
-	exit $status
+	exit $exit_status
       fi
 
       if test -n "$shlibpath_var"; then
@@ -4400,7 +4844,7 @@ static const void *lt_preloaded_setup() {
 	# Link the executable and exit
 	$show "$link_command"
 	$run eval "$link_command" || exit $?
-	exit 0
+	exit $EXIT_SUCCESS
       fi
 
       if test "$hardcode_action" = relink; then
@@ -4414,7 +4858,7 @@ static const void *lt_preloaded_setup() {
 	if test "$fast_install" != no; then
 	  link_command="$finalize_var$compile_command$finalize_rpath"
 	  if test "$fast_install" = yes; then
-	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`
 	  else
 	    # fast_install is set to needless
 	    relink_command=
@@ -4451,14 +4895,14 @@ static const void *lt_preloaded_setup() {
 	  fi
 	done
 	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+	relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
       fi
 
       # Quote $echo for shipping.
-      if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
-	case $0 in
-	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
-	*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
+      if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
+	case $progpath in
+	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
+	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
 	esac
 	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
       else
@@ -4481,10 +4925,12 @@ static const void *lt_preloaded_setup() {
 	esac
 	case $host in
 	  *cygwin* | *mingw* )
-	    cwrappersource=`$echo ${objdir}/lt-${output}.c`
-	    cwrapper=`$echo ${output}.exe`
-	    $rm $cwrappersource $cwrapper
-	    trap "$rm $cwrappersource $cwrapper; exit 1" 1 2 15
+            output_name=`basename $output`
+            output_path=`dirname $output`
+            cwrappersource="$output_path/$objdir/lt-$output_name.c"
+            cwrapper="$output_path/$output_name.exe"
+            $rm $cwrappersource $cwrapper
+            trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
 
 	    cat > $cwrappersource <<EOF
 
@@ -4493,7 +4939,7 @@ static const void *lt_preloaded_setup() {
 
    The $output program cannot be directly executed until all the libtool
    libraries that it depends on are installed.
-   
+
    This wrapper executable should never be moved out of the build directory.
    If it is, it will not operate correctly.
 
@@ -4509,6 +4955,9 @@ EOF
 #include <malloc.h>
 #include <stdarg.h>
 #include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <sys/stat.h>
 
 #if defined(PATH_MAX)
 # define LT_PATHMAX PATH_MAX
@@ -4519,15 +4968,19 @@ EOF
 #endif
 
 #ifndef DIR_SEPARATOR
-#define DIR_SEPARATOR '/'
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
 #endif
 
 #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
   defined (__OS2__)
-#define HAVE_DOS_BASED_FILE_SYSTEM
-#ifndef DIR_SEPARATOR_2 
-#define DIR_SEPARATOR_2 '\\'
-#endif
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
 #endif
 
 #ifndef DIR_SEPARATOR_2
@@ -4537,17 +4990,32 @@ EOF
         (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
 #endif /* DIR_SEPARATOR_2 */
 
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
 #define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
 #define XFREE(stale) do { \
   if (stale) { free ((void *) stale); stale = 0; } \
 } while (0)
 
+/* -DDEBUG is fairly common in CFLAGS.  */
+#undef DEBUG
+#if defined DEBUGWRAPPER
+# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
+#else
+# define DEBUG(format, ...)
+#endif
+
 const char *program_name = NULL;
 
 void * xmalloc (size_t num);
 char * xstrdup (const char *string);
-char * basename (const char *name);
-char * fnqualify(const char *path);
+const char * base_name (const char *name);
+char * find_executable(const char *wrapper);
+int    check_executable(const char *path);
 char * strendzap(char *str, const char *pat);
 void lt_fatal (const char *message, ...);
 
@@ -4556,30 +5024,52 @@ main (int argc, char *argv[])
 {
   char **newargz;
   int i;
-  
-  program_name = (char *) xstrdup ((char *) basename (argv[0]));
+
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  DEBUG("(main) argv[0]      : %s\n",argv[0]);
+  DEBUG("(main) program_name : %s\n",program_name);
   newargz = XMALLOC(char *, argc+2);
 EOF
 
-	    cat >> $cwrappersource <<EOF
-  newargz[0] = "$SHELL";
+            cat >> $cwrappersource <<EOF
+  newargz[0] = (char *) xstrdup("$SHELL");
 EOF
 
-	    cat >> $cwrappersource <<"EOF"
-  newargz[1] = fnqualify(argv[0]);
+            cat >> $cwrappersource <<"EOF"
+  newargz[1] = find_executable(argv[0]);
+  if (newargz[1] == NULL)
+    lt_fatal("Couldn't find %s", argv[0]);
+  DEBUG("(main) found exe at : %s\n",newargz[1]);
   /* we know the script has the same name, without the .exe */
   /* so make sure newargz[1] doesn't end in .exe */
-  strendzap(newargz[1],".exe"); 
+  strendzap(newargz[1],".exe");
   for (i = 1; i < argc; i++)
     newargz[i+1] = xstrdup(argv[i]);
   newargz[argc+1] = NULL;
+
+  for (i=0; i<argc+1; i++)
+  {
+    DEBUG("(main) newargz[%d]   : %s\n",i,newargz[i]);
+    ;
+  }
+
 EOF
 
-	    cat >> $cwrappersource <<EOF
+            case $host_os in
+              mingw*)
+                cat >> $cwrappersource <<EOF
+  execv("$SHELL",(char const **)newargz);
+EOF
+              ;;
+              *)
+                cat >> $cwrappersource <<EOF
   execv("$SHELL",newargz);
 EOF
+              ;;
+            esac
 
-	    cat >> $cwrappersource <<"EOF"
+            cat >> $cwrappersource <<"EOF"
+  return 127;
 }
 
 void *
@@ -4592,59 +5082,159 @@ xmalloc (size_t num)
   return p;
 }
 
-char * 
+char *
 xstrdup (const char *string)
 {
   return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
 ;
 }
 
-char *
-basename (const char *name)
+const char *
+base_name (const char *name)
 {
   const char *base;
 
 #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
   /* Skip over the disk name in MSDOS pathnames. */
-  if (isalpha (name[0]) && name[1] == ':') 
+  if (isalpha ((unsigned char)name[0]) && name[1] == ':')
     name += 2;
 #endif
 
   for (base = name; *name; name++)
     if (IS_DIR_SEPARATOR (*name))
       base = name + 1;
-  return (char *) base;
+  return base;
 }
 
-char * 
-fnqualify(const char *path)
+int
+check_executable(const char * path)
 {
-  size_t size;
-  char *p;
-  char tmp[LT_PATHMAX + 1];
+  struct stat st;
 
-  assert(path != NULL);
+  DEBUG("(check_executable)  : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
+  if ((!path) || (!*path))
+    return 0;
 
-  /* Is it qualified already? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  if (isalpha (path[0]) && path[1] == ':')
-    return xstrdup (path);
+  if ((stat (path, &st) >= 0) &&
+      (
+        /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
+#if defined (S_IXOTH)
+       ((st.st_mode & S_IXOTH) == S_IXOTH) ||
 #endif
-  if (IS_DIR_SEPARATOR (path[0]))
-    return xstrdup (path);
+#if defined (S_IXGRP)
+       ((st.st_mode & S_IXGRP) == S_IXGRP) ||
+#endif
+       ((st.st_mode & S_IXUSR) == S_IXUSR))
+      )
+    return 1;
+  else
+    return 0;
+}
 
-  /* prepend the current directory */
-  /* doesn't handle '~' */
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise */
+char *
+find_executable (const char* wrapper)
+{
+  int has_slash = 0;
+  const char* p;
+  const char* p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  int tmp_len;
+  char* concat_name;
+
+  DEBUG("(find_executable)  : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
+
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+
+  /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
+  {
+    concat_name = xstrdup (wrapper);
+    if (check_executable(concat_name))
+      return concat_name;
+    XFREE(concat_name);
+  }
+  else
+  {
+#endif
+    if (IS_DIR_SEPARATOR (wrapper[0]))
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable(concat_name))
+        return concat_name;
+      XFREE(concat_name);
+    }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  }
+#endif
+
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+    {
+      has_slash = 1;
+      break;
+    }
+  if (!has_slash)
+  {
+    /* no slashes; search PATH */
+    const char* path = getenv ("PATH");
+    if (path != NULL)
+    {
+      for (p = path; *p; p = p_next)
+      {
+        const char* q;
+        size_t p_len;
+        for (q = p; *q; q++)
+          if (IS_PATH_SEPARATOR(*q))
+            break;
+        p_len = q - p;
+        p_next = (*q == '\0' ? q : q + 1);
+        if (p_len == 0)
+        {
+          /* empty path: current directory */
+          if (getcwd (tmp, LT_PATHMAX) == NULL)
+            lt_fatal ("getcwd failed");
+          tmp_len = strlen(tmp);
+          concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+          memcpy (concat_name, tmp, tmp_len);
+          concat_name[tmp_len] = '/';
+          strcpy (concat_name + tmp_len + 1, wrapper);
+        }
+        else
+        {
+          concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
+          memcpy (concat_name, p, p_len);
+          concat_name[p_len] = '/';
+          strcpy (concat_name + p_len + 1, wrapper);
+        }
+        if (check_executable(concat_name))
+          return concat_name;
+        XFREE(concat_name);
+      }
+    }
+    /* not found in PATH; assume curdir */
+  }
+  /* Relative path | not found in path: prepend cwd */
   if (getcwd (tmp, LT_PATHMAX) == NULL)
     lt_fatal ("getcwd failed");
-  size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */
-  p = XMALLOC(char, size);
-  sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path);
-  return p;
+  tmp_len = strlen(tmp);
+  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+
+  if (check_executable(concat_name))
+    return concat_name;
+  XFREE(concat_name);
+  return NULL;
 }
 
 char *
-strendzap(char *str, const char *pat) 
+strendzap(char *str, const char *pat)
 {
   size_t len, patlen;
 
@@ -4664,7 +5254,7 @@ strendzap(char *str, const char *pat)
 }
 
 static void
-lt_error_core (int exit_status, const char * mode, 
+lt_error_core (int exit_status, const char * mode,
           const char * message, va_list ap)
 {
   fprintf (stderr, "%s: %s: ", program_name, mode);
@@ -4684,16 +5274,16 @@ lt_fatal (const char *message, ...)
   va_end (ap);
 }
 EOF
-	  # we should really use a build-platform specific compiler
-	  # here, but OTOH, the wrappers (shell script and this C one)
-	  # are only useful if you want to execute the "real" binary.
-	  # Since the "real" binary is built for $host, then this
-	  # wrapper might as well be built for $host, too.
-	  $run $LTCC -s -o $cwrapper $cwrappersource
-	  ;;
-	esac
-	$rm $output
-	trap "$rm $output; exit 1" 1 2 15
+          # we should really use a build-platform specific compiler
+          # here, but OTOH, the wrappers (shell script and this C one)
+          # are only useful if you want to execute the "real" binary.
+          # Since the "real" binary is built for $host, then this
+          # wrapper might as well be built for $host, too.
+          $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
+          ;;
+        esac
+        $rm $output
+        trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
 
 	$echo > $output "\
 #! $SHELL
@@ -4712,9 +5302,23 @@ EOF
 Xsed='${SED} -e 1s/^X//'
 sed_quote_subst='$sed_quote_subst'
 
+# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 relink_command=\"$relink_command\"
 
@@ -4793,7 +5397,7 @@ else
       else
 	$echo \"\$relink_command_output\" >&2
 	$rm \"\$progdir/\$file\"
-	exit 1
+	exit $EXIT_FAILURE
       fi
     fi
 
@@ -4843,32 +5447,32 @@ else
 	# Backslashes separate directories on plain windows
 	*-*-mingw | *-*-os2*)
 	  $echo >> $output "\
-      exec \$progdir\\\\\$program \${1+\"\$@\"}
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
 "
 	  ;;
 
 	*)
 	  $echo >> $output "\
-      exec \$progdir/\$program \${1+\"\$@\"}
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
 "
 	  ;;
 	esac
 	$echo >> $output "\
-      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
-      exit 1
+      \$echo \"\$0: cannot exec \$program \$*\"
+      exit $EXIT_FAILURE
     fi
   else
     # The program doesn't exist.
-    \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+    \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
     \$echo \"This script is just a wrapper for \$program.\" 1>&2
     $echo \"See the $PACKAGE documentation for more information.\" 1>&2
-    exit 1
+    exit $EXIT_FAILURE
   fi
 fi\
 "
 	chmod +x $output
       fi
-      exit 0
+      exit $EXIT_SUCCESS
       ;;
     esac
 
@@ -4891,76 +5495,78 @@ fi\
 
       if test -n "$addlibs"; then
 	gentop="$output_objdir/${outputname}x"
-	$show "${rm}r $gentop"
-	$run ${rm}r "$gentop"
-	$show "$mkdir $gentop"
-	$run $mkdir "$gentop"
-	status=$?
-	if test "$status" -ne 0 && test ! -d "$gentop"; then
-	  exit $status
-	fi
 	generated="$generated $gentop"
 
-	# Add in members from convenience archives.
-	for xlib in $addlibs; do
-	  # Extract the objects.
-	  case $xlib in
-	  [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	  *) xabs=`pwd`"/$xlib" ;;
-	  esac
-	  xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	  xdir="$gentop/$xlib"
-
-	  $show "${rm}r $xdir"
-	  $run ${rm}r "$xdir"
-	  $show "$mkdir $xdir"
-	  $run $mkdir "$xdir"
-	  status=$?
-	  if test "$status" -ne 0 && test ! -d "$xdir"; then
-	    exit $status
-	  fi
-	  # We will extract separately just the conflicting names and we will no
-	  # longer touch any unique names. It is faster to leave these extract
-	  # automatically by $AR in one run.
-	  $show "(cd $xdir && $AR x $xabs)"
-	  $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-	  if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
-	    :
-	  else
-	    $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
-	    $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
-	    $AR t "$xabs" | sort | uniq -cd | while read -r count name
-	    do
-	      i=1
-	      while test "$i" -le "$count"
-	      do
-	       # Put our $i before any first dot (extension)
-	       # Never overwrite any file
-	       name_to="$name"
-	       while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
-	       do
-		 name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
-	       done
-	       $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
-	       $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
-	       i=`expr $i + 1`
-	      done
-	    done
-	  fi
-
-	  oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
-	done
+	func_extract_archives $gentop $addlibs
+	oldobjs="$oldobjs $func_extract_archives_result"
       fi
 
       # Do each command in the archive commands.
       if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-	eval cmds=\"$old_archive_from_new_cmds\"
+       cmds=$old_archive_from_new_cmds
       else
+	# POSIX demands no paths to be encoded in archives.  We have
+	# to avoid creating archives with duplicate basenames if we
+	# might have to extract them afterwards, e.g., when creating a
+	# static archive out of a convenience library, or when linking
+	# the entirety of a libtool archive into another (currently
+	# not supported by libtool).
+	if (for obj in $oldobjs
+	    do
+	      $echo "X$obj" | $Xsed -e 's%^.*/%%'
+	    done | sort | sort -uc >/dev/null 2>&1); then
+	  :
+	else
+	  $echo "copying selected object files to avoid basename conflicts..."
+
+	  if test -z "$gentop"; then
+	    gentop="$output_objdir/${outputname}x"
+	    generated="$generated $gentop"
+
+	    $show "${rm}r $gentop"
+	    $run ${rm}r "$gentop"
+	    $show "$mkdir $gentop"
+	    $run $mkdir "$gentop"
+	    exit_status=$?
+	    if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
+	      exit $exit_status
+	    fi
+	  fi
+
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  counter=1
+	  for obj in $save_oldobjs
+	  do
+	    objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+	    case " $oldobjs " in
+	    " ") oldobjs=$obj ;;
+	    *[\ /]"$objbase "*)
+	      while :; do
+		# Make sure we don't pick an alternate name that also
+		# overlaps.
+		newobj=lt$counter-$objbase
+		counter=`expr $counter + 1`
+		case " $oldobjs " in
+		*[\ /]"$newobj "*) ;;
+		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
+		esac
+	      done
+	      $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+	      $run ln "$obj" "$gentop/$newobj" ||
+	      $run cp "$obj" "$gentop/$newobj"
+	      oldobjs="$oldobjs $gentop/$newobj"
+	      ;;
+	    *) oldobjs="$oldobjs $obj" ;;
+	    esac
+	  done
+	fi
+
 	eval cmds=\"$old_archive_cmds\"
 
 	if len=`expr "X$cmds" : ".*"` &&
 	     test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	  :
+	  cmds=$old_archive_cmds
 	else
 	  # the command line is too long to link in one step, link in parts
 	  $echo "using piecewise archive linking..."
@@ -4969,31 +5575,18 @@ fi\
 	  objlist=
 	  concat_cmds=
 	  save_oldobjs=$oldobjs
-	  # GNU ar 2.10+ was changed to match POSIX; thus no paths are
-	  # encoded into archives.  This makes 'ar r' malfunction in
-	  # this piecewise linking case whenever conflicting object
-	  # names appear in distinct ar calls; check, warn and compensate.
-	    if (for obj in $save_oldobjs
-	    do
-	      $echo "X$obj" | $Xsed -e 's%^.*/%%'
-	    done | sort | sort -uc >/dev/null 2>&1); then
-	    :
-	  else
-	    $echo "$modename: warning: object name conflicts; overriding AR_FLAGS to 'cq'" 1>&2
-	    $echo "$modename: warning: to ensure that POSIX-compatible ar will work" 1>&2
-	    AR_FLAGS=cq
-	  fi
+
 	  # Is there a better way of finding the last object in the list?
 	  for obj in $save_oldobjs
 	  do
 	    last_oldobj=$obj
-	  done  
+	  done
 	  for obj in $save_oldobjs
 	  do
 	    oldobjs="$objlist $obj"
 	    objlist="$objlist $obj"
 	    eval test_cmds=\"$old_archive_cmds\"
-	    if len=`expr "X$test_cmds" : ".*"` &&
+	    if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
 	       test "$len" -le "$max_cmd_len"; then
 	      :
 	    else
@@ -5001,7 +5594,7 @@ fi\
 	      oldobjs=$objlist
 	      if test "$obj" = "$last_oldobj" ; then
 	        RANLIB=$save_RANLIB
-	      fi  
+	      fi
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
 	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
 	      objlist=
@@ -5012,12 +5605,13 @@ fi\
 	  if test "X$oldobjs" = "X" ; then
 	    eval cmds=\"\$concat_cmds\"
 	  else
-	    eval cmds=\"\$concat_cmds~$old_archive_cmds\"
+	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
 	  fi
 	fi
       fi
       save_ifs="$IFS"; IFS='~'
       for cmd in $cmds; do
+        eval cmd=\"$cmd\"
 	IFS="$save_ifs"
 	$show "$cmd"
 	$run eval "$cmd" || exit $?
@@ -5049,8 +5643,12 @@ fi\
 	fi
       done
       # Quote the link command for shipping.
-      relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+      if test "$hardcode_automatic" = yes ; then
+	relink_command=
+      fi
+
 
       # Only create the output if not a dry run.
       if test -z "$run"; then
@@ -5069,7 +5667,7 @@ fi\
 		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
 		if test -z "$libdir"; then
 		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		  exit 1
+		  exit $EXIT_FAILURE
 		fi
 		newdependency_libs="$newdependency_libs $libdir/$name"
 		;;
@@ -5083,7 +5681,7 @@ fi\
 	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
 	      if test -z "$libdir"; then
 		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit 1
+		exit $EXIT_FAILURE
 	      fi
 	      newdlfiles="$newdlfiles $libdir/$name"
 	    done
@@ -5094,11 +5692,30 @@ fi\
 	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
 	      if test -z "$libdir"; then
 		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit 1
+		exit $EXIT_FAILURE
 	      fi
 	      newdlprefiles="$newdlprefiles $libdir/$name"
 	    done
 	    dlprefiles="$newdlprefiles"
+	  else
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      newdlfiles="$newdlfiles $abs"
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      newdlprefiles="$newdlprefiles $abs"
+	    done
+	    dlprefiles="$newdlprefiles"
 	  fi
 	  $rm $output
 	  # place dlname in correct position for cygwin
@@ -5155,7 +5772,7 @@ relink_command=\"$relink_command\""
       $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
       ;;
     esac
-    exit 0
+    exit $EXIT_SUCCESS
     ;;
 
   # libtool install mode
@@ -5166,11 +5783,11 @@ relink_command=\"$relink_command\""
     # install_prog (especially on Windows NT).
     if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
        # Allow the use of GNU shtool's install command.
-       $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
+       $echo "X$nonopt" | grep shtool > /dev/null; then
       # Aesthetically quote it.
       arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
       case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	arg="\"$arg\""
 	;;
       esac
@@ -5179,14 +5796,14 @@ relink_command=\"$relink_command\""
       shift
     else
       install_prog=
-      arg="$nonopt"
+      arg=$nonopt
     fi
 
     # The real first argument should be the name of the installation program.
     # Aesthetically quote it.
     arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
     case $arg in
-    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
       arg="\"$arg\""
       ;;
     esac
@@ -5204,28 +5821,31 @@ relink_command=\"$relink_command\""
     do
       if test -n "$dest"; then
 	files="$files $dest"
-	dest="$arg"
+	dest=$arg
 	continue
       fi
 
       case $arg in
       -d) isdir=yes ;;
-      -f) prev="-f" ;;
-      -g) prev="-g" ;;
-      -m) prev="-m" ;;
-      -o) prev="-o" ;;
+      -f) 
+      	case " $install_prog " in
+	*[\\\ /]cp\ *) ;;
+	*) prev=$arg ;;
+	esac
+	;;
+      -g | -m | -o) prev=$arg ;;
       -s)
 	stripme=" -s"
 	continue
 	;;
-      -*) ;;
-
+      -*)
+	;;
       *)
 	# If the previous option needed an argument, then skip it.
 	if test -n "$prev"; then
 	  prev=
 	else
-	  dest="$arg"
+	  dest=$arg
 	  continue
 	fi
 	;;
@@ -5234,7 +5854,7 @@ relink_command=\"$relink_command\""
       # Aesthetically quote the argument.
       arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
       case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	arg="\"$arg\""
 	;;
       esac
@@ -5244,13 +5864,13 @@ relink_command=\"$relink_command\""
     if test -z "$install_prog"; then
       $echo "$modename: you must specify an install program" 1>&2
       $echo "$help" 1>&2
-      exit 1
+      exit $EXIT_FAILURE
     fi
 
     if test -n "$prev"; then
       $echo "$modename: the \`$prev' option requires an argument" 1>&2
       $echo "$help" 1>&2
-      exit 1
+      exit $EXIT_FAILURE
     fi
 
     if test -z "$files"; then
@@ -5260,7 +5880,7 @@ relink_command=\"$relink_command\""
 	$echo "$modename: you must specify a destination" 1>&2
       fi
       $echo "$help" 1>&2
-      exit 1
+      exit $EXIT_FAILURE
     fi
 
     # Strip any trailing slash from the destination.
@@ -5281,7 +5901,7 @@ relink_command=\"$relink_command\""
       if test "$#" -gt 2; then
 	$echo "$modename: \`$dest' is not a directory" 1>&2
 	$echo "$help" 1>&2
-	exit 1
+	exit $EXIT_FAILURE
       fi
     fi
     case $destdir in
@@ -5293,7 +5913,7 @@ relink_command=\"$relink_command\""
 	*)
 	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
 	  $echo "$help" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
       done
@@ -5322,7 +5942,7 @@ relink_command=\"$relink_command\""
 	else
 	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
 	  $echo "$help" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 
 	library_names=
@@ -5364,14 +5984,14 @@ relink_command=\"$relink_command\""
 	  # but it's something to keep an eye on.
 	  if test "$inst_prefix_dir" = "$destdir"; then
 	    $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-	    exit 1
+	    exit $EXIT_FAILURE
 	  fi
 
 	  if test -n "$inst_prefix_dir"; then
 	    # Stick the inst_prefix_dir data into the link command.
-	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	    relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
 	  else
-	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+	    relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`
 	  fi
 
 	  $echo "$modename: warning: relinking \`$file'" 1>&2
@@ -5379,7 +5999,7 @@ relink_command=\"$relink_command\""
 	  if $run eval "$relink_command"; then :
 	  else
 	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-	    exit 1
+	    exit $EXIT_FAILURE
 	  fi
 	fi
 
@@ -5403,23 +6023,36 @@ relink_command=\"$relink_command\""
 
 	  if test "$#" -gt 0; then
 	    # Delete the old symlinks, and create new ones.
+	    # Try `ln -sf' first, because the `ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
 	    for linkname
 	    do
 	      if test "$linkname" != "$realname"; then
-		$show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
-		$run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+                $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+                $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
 	      fi
 	    done
 	  fi
 
 	  # Do each command in the postinstall commands.
 	  lib="$destdir/$realname"
-	  eval cmds=\"$postinstall_cmds\"
+	  cmds=$postinstall_cmds
 	  save_ifs="$IFS"; IFS='~'
 	  for cmd in $cmds; do
 	    IFS="$save_ifs"
+	    eval cmd=\"$cmd\"
 	    $show "$cmd"
-	    $run eval "$cmd" || exit $?
+	    $run eval "$cmd" || {
+	      lt_exit=$?
+
+	      # Restore the uninstalled library and exit
+	      if test "$mode" = relink; then
+		$run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+	      fi
+
+	      exit $lt_exit
+	    }
 	  done
 	  IFS="$save_ifs"
 	fi
@@ -5457,7 +6090,7 @@ relink_command=\"$relink_command\""
 	*)
 	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
 	  $echo "$help" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	  ;;
 	esac
 
@@ -5475,7 +6108,7 @@ relink_command=\"$relink_command\""
 	  $show "$install_prog $staticobj $staticdest"
 	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
 	fi
-	exit 0
+	exit $EXIT_SUCCESS
 	;;
 
       *)
@@ -5513,23 +6146,21 @@ relink_command=\"$relink_command\""
 	  notinst_deplibs=
 	  relink_command=
 
-	  # To insure that "foo" is sourced, and not "foo.exe",
-	  # finese the cygwin/MSYS system by explicitly sourcing "foo."
-	  # which disallows the automatic-append-.exe behavior.
-	  case $build in
-	  *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
-	  *) wrapperdot=${wrapper} ;;
-	  esac
+	  # Note that it is not necessary on cygwin/mingw to append a dot to
+	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
+	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
+	  # `FILE.' does not work on cygwin managed mounts.
+	  #
 	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . ${wrapperdot} ;;
-	  *) . ./${wrapperdot} ;;
+	  case $wrapper in
+	  */* | *\\*) . ${wrapper} ;;
+	  *) . ./${wrapper} ;;
 	  esac
 
 	  # Check the variables that should have been set.
 	  if test -z "$notinst_deplibs"; then
 	    $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
-	    exit 1
+	    exit $EXIT_FAILURE
 	  fi
 
 	  finalize=yes
@@ -5551,34 +6182,25 @@ relink_command=\"$relink_command\""
 	  done
 
 	  relink_command=
-	  # To insure that "foo" is sourced, and not "foo.exe",
-	  # finese the cygwin/MSYS system by explicitly sourcing "foo."
-	  # which disallows the automatic-append-.exe behavior.
-	  case $build in
-	  *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
-	  *) wrapperdot=${wrapper} ;;
-	  esac
+	  # Note that it is not necessary on cygwin/mingw to append a dot to
+	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
+	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
+	  # `FILE.' does not work on cygwin managed mounts.
+	  #
 	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . ${wrapperdot} ;;
-	  *) . ./${wrapperdot} ;;
+	  case $wrapper in
+	  */* | *\\*) . ${wrapper} ;;
+	  *) . ./${wrapper} ;;
 	  esac
 
 	  outputname=
 	  if test "$fast_install" = no && test -n "$relink_command"; then
 	    if test "$finalize" = yes && test -z "$run"; then
-	      tmpdir="/tmp"
-	      test -n "$TMPDIR" && tmpdir="$TMPDIR"
-	      tmpdir="$tmpdir/libtool-$$"
-	      if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
-	      else
-		$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
-		continue
-	      fi
+	      tmpdir=`func_mktempdir`
 	      file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
 	      outputname="$tmpdir/$file"
 	      # Replace the output file specification.
-	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+	      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`
 
 	      $show "$relink_command"
 	      if $run eval "$relink_command"; then :
@@ -5598,7 +6220,7 @@ relink_command=\"$relink_command\""
 	fi
 
 	# remove .exe since cygwin /usr/bin/install will append another
-	# one anyways
+	# one anyway 
 	case $install_prog,$host in
 	*/usr/bin/install*,*cygwin*)
 	  case $file:$destfile in
@@ -5630,16 +6252,17 @@ relink_command=\"$relink_command\""
       $show "$install_prog $file $oldlib"
       $run eval "$install_prog \$file \$oldlib" || exit $?
 
-      if test -n "$stripme" && test -n "$striplib"; then
+      if test -n "$stripme" && test -n "$old_striplib"; then
 	$show "$old_striplib $oldlib"
 	$run eval "$old_striplib $oldlib" || exit $?
       fi
 
       # Do each command in the postinstall commands.
-      eval cmds=\"$old_postinstall_cmds\"
+      cmds=$old_postinstall_cmds
       save_ifs="$IFS"; IFS='~'
       for cmd in $cmds; do
 	IFS="$save_ifs"
+	eval cmd=\"$cmd\"
 	$show "$cmd"
 	$run eval "$cmd" || exit $?
       done
@@ -5653,9 +6276,9 @@ relink_command=\"$relink_command\""
     if test -n "$current_libdirs"; then
       # Maybe just do a dry run.
       test -n "$run" && current_libdirs=" -n$current_libdirs"
-      exec_cmd='$SHELL $0 --finish$current_libdirs'
+      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
     else
-      exit 0
+      exit $EXIT_SUCCESS
     fi
     ;;
 
@@ -5674,10 +6297,11 @@ relink_command=\"$relink_command\""
       for libdir in $libdirs; do
 	if test -n "$finish_cmds"; then
 	  # Do each command in the finish commands.
-	  eval cmds=\"$finish_cmds\"
+	  cmds=$finish_cmds
 	  save_ifs="$IFS"; IFS='~'
 	  for cmd in $cmds; do
 	    IFS="$save_ifs"
+	    eval cmd=\"$cmd\"
 	    $show "$cmd"
 	    $run eval "$cmd" || admincmds="$admincmds
        $cmd"
@@ -5694,9 +6318,9 @@ relink_command=\"$relink_command\""
     fi
 
     # Exit here if they wanted silent mode.
-    test "$show" = : && exit 0
+    test "$show" = : && exit $EXIT_SUCCESS
 
-    $echo "----------------------------------------------------------------------"
+    $echo "X----------------------------------------------------------------------" | $Xsed
     $echo "Libraries have been installed in:"
     for libdir in $libdirs; do
       $echo "   $libdir"
@@ -5729,8 +6353,8 @@ relink_command=\"$relink_command\""
     $echo
     $echo "See any operating system documentation about shared libraries for"
     $echo "more information, such as the ld(1) and ld.so(8) manual pages."
-    $echo "----------------------------------------------------------------------"
-    exit 0
+    $echo "X----------------------------------------------------------------------" | $Xsed
+    exit $EXIT_SUCCESS
     ;;
 
   # libtool execute mode
@@ -5742,7 +6366,7 @@ relink_command=\"$relink_command\""
     if test -z "$cmd"; then
       $echo "$modename: you must specify a COMMAND" 1>&2
       $echo "$help"
-      exit 1
+      exit $EXIT_FAILURE
     fi
 
     # Handle -dlopen flags immediately.
@@ -5750,7 +6374,7 @@ relink_command=\"$relink_command\""
       if test ! -f "$file"; then
 	$echo "$modename: \`$file' is not a file" 1>&2
 	$echo "$help" 1>&2
-	exit 1
+	exit $EXIT_FAILURE
       fi
 
       dir=
@@ -5761,7 +6385,7 @@ relink_command=\"$relink_command\""
 	else
 	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
 	  $echo "$help" 1>&2
-	  exit 1
+	  exit $EXIT_FAILURE
 	fi
 
 	# Read the libtool library.
@@ -5787,8 +6411,10 @@ relink_command=\"$relink_command\""
 	if test -f "$dir/$objdir/$dlname"; then
 	  dir="$dir/$objdir"
 	else
-	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
-	  exit 1
+	  if test ! -f "$dir/$dlname"; then
+	    $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
 	fi
 	;;
 
@@ -5852,12 +6478,12 @@ relink_command=\"$relink_command\""
       fi
 
       # Restore saved environment variables
-      if test "${save_LC_ALL+set}" = set; then
-	LC_ALL="$save_LC_ALL"; export LC_ALL
-      fi
-      if test "${save_LANG+set}" = set; then
-	LANG="$save_LANG"; export LANG
-      fi
+      for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      do
+	eval "if test \"\${save_$lt_var+set}\" = set; then
+		$lt_var=\$save_$lt_var; export $lt_var
+	      fi"
+      done
 
       # Now prepare to actually exec the command.
       exec_cmd="\$cmd$args"
@@ -5868,7 +6494,7 @@ relink_command=\"$relink_command\""
 	$echo "export $shlibpath_var"
       fi
       $echo "$cmd$args"
-      exit 0
+      exit $EXIT_SUCCESS
     fi
     ;;
 
@@ -5896,7 +6522,7 @@ relink_command=\"$relink_command\""
     if test -z "$rm"; then
       $echo "$modename: you must specify an RM program" 1>&2
       $echo "$help" 1>&2
-      exit 1
+      exit $EXIT_FAILURE
     fi
 
     rmdirs=
@@ -5946,15 +6572,24 @@ relink_command=\"$relink_command\""
 	    rmfiles="$rmfiles $objdir/$n"
 	  done
 	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
-	  test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
 
-	  if test "$mode" = uninstall; then
+	  case "$mode" in
+	  clean)
+	    case "  $library_names " in
+	    # "  " in the beginning catches empty $dlname
+	    *" $dlname "*) ;;
+	    *) rmfiles="$rmfiles $objdir/$dlname" ;;
+	    esac
+	     test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+	    ;;
+	  uninstall)
 	    if test -n "$library_names"; then
 	      # Do each command in the postuninstall commands.
-	      eval cmds=\"$postuninstall_cmds\"
+	      cmds=$postuninstall_cmds
 	      save_ifs="$IFS"; IFS='~'
 	      for cmd in $cmds; do
 		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
 		$show "$cmd"
 		$run eval "$cmd"
 		if test "$?" -ne 0 && test "$rmforce" != yes; then
@@ -5966,10 +6601,11 @@ relink_command=\"$relink_command\""
 
 	    if test -n "$old_library"; then
 	      # Do each command in the old_postuninstall commands.
-	      eval cmds=\"$old_postuninstall_cmds\"
+	      cmds=$old_postuninstall_cmds
 	      save_ifs="$IFS"; IFS='~'
 	      for cmd in $cmds; do
 		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
 		$show "$cmd"
 		$run eval "$cmd"
 		if test "$?" -ne 0 && test "$rmforce" != yes; then
@@ -5979,7 +6615,8 @@ relink_command=\"$relink_command\""
 	      IFS="$save_ifs"
 	    fi
 	    # FIXME: should reinstall the best remaining shared library.
-	  fi
+	    ;;
+	  esac
 	fi
 	;;
 
@@ -6008,7 +6645,7 @@ relink_command=\"$relink_command\""
 	if test "$mode" = clean ; then
 	  noexename=$name
 	  case $file in
-	  *.exe) 
+	  *.exe)
 	    file=`$echo $file|${SED} 's,.exe$,,'`
 	    noexename=`$echo $name|${SED} 's,.exe$,,'`
 	    # $file with .exe has already been added to rmfiles,
@@ -6053,20 +6690,20 @@ relink_command=\"$relink_command\""
   "")
     $echo "$modename: you must specify a MODE" 1>&2
     $echo "$generic_help" 1>&2
-    exit 1
+    exit $EXIT_FAILURE
     ;;
   esac
 
   if test -z "$exec_cmd"; then
     $echo "$modename: invalid operation mode \`$mode'" 1>&2
     $echo "$generic_help" 1>&2
-    exit 1
+    exit $EXIT_FAILURE
   fi
 fi # test -z "$show_help"
 
 if test -n "$exec_cmd"; then
   eval exec $exec_cmd
-  exit 1
+  exit $EXIT_FAILURE
 fi
 
 # We need to display help for each of the modes.
@@ -6102,7 +6739,7 @@ MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
 a more detailed description of MODE.
 
 Report bugs to <bug-libtool@gnu.org>."
-  exit 0
+  exit $EXIT_SUCCESS
   ;;
 
 clean)
@@ -6203,9 +6840,9 @@ The following components of LINK-COMMAND are treated specially:
   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
   -export-symbols SYMFILE
-		    try to export only the symbols listed in SYMFILE
+                    try to export only the symbols listed in SYMFILE
   -export-symbols-regex REGEX
-		    try to export only the symbols matching REGEX
+                    try to export only the symbols matching REGEX
   -LLIBDIR          search LIBDIR for required installed libraries
   -lNAME            OUTPUT-FILE requires the installed library libNAME
   -module           build a library that can dlopened
@@ -6214,12 +6851,16 @@ The following components of LINK-COMMAND are treated specially:
   -no-undefined     declare that a library does not refer to external symbols
   -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
   -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
   -release RELEASE  specify package release information
   -rpath LIBDIR     the created library will eventually be installed in LIBDIR
   -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-  -static           do not do any dynamic linking of libtool libraries
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
   -version-info CURRENT[:REVISION[:AGE]]
-		    specify library version info [each variable defaults to 0]
+                    specify library version info [each variable defaults to 0]
 
 All other options (arguments beginning with \`-') are ignored.
 
@@ -6255,14 +6896,14 @@ Otherwise, only FILE itself is deleted using RM."
 *)
   $echo "$modename: invalid operation mode \`$mode'" 1>&2
   $echo "$help" 1>&2
-  exit 1
+  exit $EXIT_FAILURE
   ;;
 esac
 
 $echo
 $echo "Try \`$modename --help' for more information about other modes."
 
-exit 0
+exit $?
 
 # The TAGs below are defined such that we never get into a situation
 # in which we disable both kinds of libraries.  Given conflicting
@@ -6276,12 +6917,11 @@ exit 0
 # configuration.  But we'll never go from static-only to shared-only.
 
 # ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-build_libtool_libs=no
-build_old_libs=yes
+disable_libs=shared
 # ### END LIBTOOL TAG CONFIG: disable-shared
 
 # ### BEGIN LIBTOOL TAG CONFIG: disable-static
-build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac`
+disable_libs=static
 # ### END LIBTOOL TAG CONFIG: disable-static
 
 # Local Variables:
diff --git a/src/mzscheme/configure.ac b/src/mzscheme/configure.ac
index fc37dd7abd..665a16eb74 100644
--- a/src/mzscheme/configure.ac
+++ b/src/mzscheme/configure.ac
@@ -115,8 +115,11 @@ fi
 
 if test "${enable_shared}" = "yes" ; then
   if test "$OS" = "Darwin" ; then
-    echo "ERROR: don't use --enable-shared or --enable-dynlib under Mac OS X"
-    exit 1
+    if test "${enable_xonx}" != "yes" ; then
+       echo "ERROR: don't use --enable-shared or --enable-dynlib under Mac OS X,"
+       echo "       unless you also use --enable-xonx"
+       exit 1
+    fi
   fi
 fi
 
diff --git a/src/mzscheme/dynsrc/ustart.c b/src/mzscheme/dynsrc/ustart.c
index 4d1d14d7f6..b8cb44cede 100644
--- a/src/mzscheme/dynsrc/ustart.c
+++ b/src/mzscheme/dynsrc/ustart.c
@@ -342,14 +342,20 @@ int main(int argc, char **argv)
   exe_path = absolutize(exe_path, me);
   lib_path = absolutize(lib_path, me);
 
+# ifdef OS_X
+#  define LD_LIB_PATH "DYLD_LIBRARY_PATH"
+# else
+#  define LD_LIB_PATH "LD_LIBRARY_PATH"
+# endif
+
   if (*lib_path) {
-    dll_path = getenv("LD_LIBRARY_PATH");
+    dll_path = getenv(LD_LIB_PATH);
     if (!dll_path) {
       dll_path = "";
     }
     dll_path = string_append(dll_path, ":");
     dll_path = string_append(lib_path, dll_path);
-    dll_path = string_append("LD_LIBRARY_PATH=", dll_path);
+    dll_path = string_append(LD_LIB_PATH "=", dll_path);
     putenv(dll_path);
   }
 
diff --git a/src/mzscheme/src/env.c b/src/mzscheme/src/env.c
index 42171e4d57..e303975e5d 100644
--- a/src/mzscheme/src/env.c
+++ b/src/mzscheme/src/env.c
@@ -3717,11 +3717,12 @@ local_exp_time_value(int argc, Scheme_Object *argv[])
     scheme_wrong_type("syntax-local-value", "syntax identifier", 0, argc, argv);
 
   if (argc > 1) {
-    scheme_check_proc_arity("syntax-local-value", 0, 1, argc, argv);
-    if (argc > 2) {
+    scheme_check_proc_arity2("syntax-local-value", 0, 1, argc, argv, 1);
+    if ((argc > 2)
+        && SCHEME_TRUEP(argv[2])) { 
       Scheme_Comp_Env *stx_env;
       if (!SAME_TYPE(scheme_intdef_context_type, SCHEME_TYPE(argv[2])))
-	scheme_wrong_type("syntax-local-value", "internal-definition context", 2, argc, argv);
+	scheme_wrong_type("syntax-local-value", "internal-definition context or #f", 2, argc, argv);
       stx_env = (Scheme_Comp_Env *)SCHEME_PTR1_VAL(argv[2]);
       if (!scheme_is_sub_env(stx_env, env)) {
 	scheme_raise_exn(MZEXN_FAIL_CONTRACT, "syntax-local-value: transforming context does "
diff --git a/src/mzscheme/src/port.c b/src/mzscheme/src/port.c
index 13803e5427..d3035d86f9 100644
--- a/src/mzscheme/src/port.c
+++ b/src/mzscheme/src/port.c
@@ -7993,6 +7993,9 @@ void scheme_signal_received(void)
     write(put_external_event_fd, "!", 1);
   }
 #endif
+#if defined(WINDOWS_PROCESSES) || defined(WINDOWS_FILE_HANDLES)
+  ReleaseSemaphore(scheme_break_semaphore, 1, NULL);
+#endif
 }
 
 #ifdef MZ_XFORM
diff --git a/src/mzscheme/src/portfun.c b/src/mzscheme/src/portfun.c
index c355826113..fa0d1685cc 100644
--- a/src/mzscheme/src/portfun.c
+++ b/src/mzscheme/src/portfun.c
@@ -4566,6 +4566,7 @@ static Scheme_Object *default_load(int argc, Scheme_Object *argv[])
     config = scheme_extend_config(config, MZCONFIG_CAN_READ_QUASI, scheme_true);
     config = scheme_extend_config(config, MZCONFIG_CAN_READ_READER, scheme_true);
     config = scheme_extend_config(config, MZCONFIG_READ_DECIMAL_INEXACT, scheme_true);
+    config = scheme_extend_config(config, MZCONFIG_READTABLE, scheme_false);
   }
 
   lhd = MALLOC_ONE_RT(LoadHandlerData);
diff --git a/src/mzscheme/src/string.c b/src/mzscheme/src/string.c
index 316bf3dabc..d791a0e2da 100644
--- a/src/mzscheme/src/string.c
+++ b/src/mzscheme/src/string.c
@@ -2118,7 +2118,7 @@ static Scheme_Object *system_type(int argc, Scheme_Object *argv[])
     Scheme_Object *sym;
     sym = scheme_intern_symbol("link");
     if (SAME_OBJ(argv[0], sym)) {
-#ifdef OS_X
+#if defined(OS_X) && !defined(XONX)
       return scheme_intern_symbol("framework");
 #else
 # ifdef DOS_FILE_SYSTEM