When a tag is serializable but not `write'--`read' invariant,
then it needs to be serialized and deserialized.
Also, clarify and check in `tag?' that a tag should be
serializable.
Uses "Github flavored markdown". Specifically, code blocks are opened
using ```scheme so that Github will lex and format them as Scheme code
rather than generic monospace.
Note: I would have used ```racket, but we are still waiting for the
pygments.rb project to pull again from pygments-main -- to which I
contributed a Racket lexer back in August. After pygments.rb pulls,
can update this to use ```racket instead.
Allowing them would require support for immutable fxvectors and
flvectors, interning, and more. Since the motivation for reader
support is to make marshaling and unmarshaling easier, allow
them only in `read' mode. Change printing to make then unquotable.
For example, a new DrRacket window (with a file named tmp.rkt in the
and 356 afterwards. This is under mac os x with, I believe, the
default system font sizes. (The file is important because different
languages can have different buttons in the toolbar and the filename's
length itself can affect the minimum size.)
Mostly this change is the addition of a new kind of panel that
lets its children have multiple fixed sizes (as opposed to
just a single minimum size and (optionally arbitrarily large))
It also adjusts the various toolbar buttons to use this new code.
Also, there's a few tweaks to shrink other things that became the
limiting factor in shrinking the width of the DrRacket window.
Currently, at least for #lang racket programs, the toolbar buttons
along the top of the window are the limiting factor (including the
save button). With a bogus language (ie, #lang rackeeet), the bottom
bar is the limiting factor, since that will have only the Save, Run,
and Stop buttons.
related to PR 13281
Also switches scribble search trampoline to standard DOCTYPE.
Scribble's HTML output currently relies on the quirks-mode
box model for layout of the many tables used in rendering.
However, Scribble doesn't need the rest of the changes in
browser quirks modes, so we choose a DOCTYPE that just
changes the box model.
It's non-obvious how to replicated this formatting with CSS
in standard-mode rendering. Probably a better long term
solution is to move away from table-based layout.
See further discussion on GitHub pull request 158 here:
https://github.com/plt/racket/pull/158
Handle close parentheses in a smarter way while in
auto-parens mode and be a little more smart about
inserting brace pairs in general.
In summary:
- Add some "smart-skip" behavior to insert-close-paren,
described in the documentation.
- When auto-parens mode is enabled,
the existing "balance-parens" keybinding invokes
insert-close-paren with a smart-skip argument of
'adjacent
- A new "balance-parens-forward" keybinding invokes
insert-close-paren with a smart-skip argument of
'forward (whether or not auto-parens mode is
enabled)
- Enable basic smart-skip behavior for
strings ("...") and |...| pairs, specifically, typing
a double-quote or bar character when the cursor
immediately precedes one causes the cursor to simply
skip over the existing one
- Tweak auto-insertion of block comment pairs; i.e.
typing hash and a bar results in a properly balanced
#||# pair. Also, when you type a bar character when
the cursor immediately precedes a closing bar and
hash of a comment, then the cursor skips over both
characters (this seems better than having it just
skip over the bar, and then having to introduce a
new keybinding to detect when a hash is typed while
the cursor is between a bar and a hash)
- In strings and line/block comments, auto-parens mode
no longer has any effect (you can still use the M+..
keybindings to force insertion of a particular brace
pair)
- Detect when a character constant is being typed, and
don't insert brace pairs if so; i.e. if the cursor
is immediately after #\ , then typing any open parens,
double quote, or bar, does _not_ result in the
insertion of an open/close pair even in auto-parens
mode
- Add a bunch of tests related to auto-parens, matching
pairs of braces, strings, comments, etc. to
collects/tests/framework/racket.rkt
Changes the implementation of highlight-range so that it
only recomputes all of the new locations from the positions
when on-reflow is called (otherwise only computing the
relevant ones) and make the on-reflow callback chop itself
up, in case there are lots of highlighted ranges to avoid
tying up the event loop.
Changes searching so that it doesn't neccessarily compute
the entire search results in a single event callback
(but also make it start the computation more aggressively)
Overall, this changes the strategy from one that, for any potentially
long-running callback, just tried to push it off into the future, into
a strategy that tries to avoid long-running callbacks by breaking the
work up into chunks, but starting the first chunk immediately (in a
low-priority callback).
Also, misc other changes to make this work better and generally clean
things up.
For example, the cross-reference information for the
Reference is now broken into about 16 pieces, so that
resolving a cross-reference into the Reference doesn't
require loading all cross-reference information for
the Reference.
Every document is split into two pieces, so that the title
of a document is roughly in its own piece. That way,
re-building the page of all installed documentation can be more
scalable (after some further changes).
The `xref' produced by `setup/xref' uses the database to delay
loading "out.sxref"s, which cuts 64-bit DrRacket's initial
footprint by around 50MB (i.e., about 20%).
popup menu
Extends append-editor-operation-menu-items so that when you
pass an editor and a position, it checks to see if that spot
has a non-string% snip and, if so, copies that one position
(or cuts it, depending).
Then, use that extension in DrRacket
closes PR 12791
It was pulling from `scheme/gui/base', instead. The one from `scheme/gui/base'
is now different and still pulls from `scheme/gui/base'.
This could break some programs that accidentally depended on `scheme/gui/base'
exports from `gui-dynamic-require', but it's more likely to fix problems.
A page-setup dialog is now available on all platforms, which means
that no dialog will appear when a `pirinter-dc%' is created. Meanwhile,
note that `end-doc' normally shows a (different) dialog.
getter/setters instead of overriding a method
this has the benefit that the delegate does not have to be
rebuilt when switching tabs in drracket; we just leave the
old delegate on the old definitions text, and the swap it
back into the editor-canvas when we swap the text% object
itself back in.
Track fixnum results in the same way as flonum results to enable
unboxing, if that turns out to be useful. The intent of the change,
though, is to support other types in the future, such as "extnums".
The output `raco decompile' no longer includes `#%in', `#%flonum',
etc., annotations, which are mostly obvious and difficult to
keep in sync with the implementation. A local-binding name now
reflects a known type, however.
The change includes a bug repair for he bytecode compiler that
is independent of the generalization (i.e., the new test case
triggered the old problem using flonums).
The new function allows declaration of a module dependency, as
opposed to a mere file dependency. Misuse of this function opens
the door to cyclic compilation dependencies, so we have to check
for that in `compiler/cm'.
Also, log a warning when it is used in a position where it
doesn't work rght with the executable creator. I didn't make
this case an error, because `define-runtime-path' can still
work in that case as long as no standalone executable needs
to be created.
I started from tabs that are not on the beginning of lines, and in
several places I did further cleanings.
If you're worried about knowing who wrote some code, for example, if you
get to this commit in "git blame", then note that you can use the "-w"
flag in many git commands to ignore whitespaces. For example, to see
per-line authors, use "git blame -w <file>". Another example: to see
the (*much* smaller) non-whitespace changes in this (or any other)
commit, use "git log -p -w -1 <sha1>".
Add "Version" in front of a version name via `.version:before' or
`.versionNoNav:before' and `\SVersionBefore', so that they can
be configured through overriding CSS or Latex macro declarations.
Also, improve the documentation for how the `#:version' argument
of `title' is propagated to a `part' style property.
Closes PR 13227
Shape information allows the linker to check the importing
module's compile-time expectation against the run-time
value of its imports. The JIT, in turn, can rely on that
checking to better inline structure-type predicates, etc.,
and to more directy call JIT-generated code across
module boundaries.
In addition to checking the "shape" of an import, the import's
JITted vs. non-JITted state must be consistent. To prevent shifts
in JIT state, the `eval-jit-enabled' parameter is now restricted
in its effect to top-level bindings.
Updated example for for/digits to avoid confusion: it's not clear
otherwise that the intentional syntax error wasn't just a casual
mistake.
Added an example for sequence-add-between.
Turn use of a finalized ffi callout into a reported error,
instead of a crash. Clarify the existence of the finalizer
in the docs. Fix error logging of the finalizer thread.
Merge to v5.3.1
Bytecode changes in two small ways to help the validator:
* a cross-module variable reference preserves the compiler's
annotation on whether the reference is constant, fixed, or other
* lifted procedures now appear in the module body just before the
definitions that use them, instead of at the beginning of the
module body
The new argument gets to chaperone/impersonate a guard at
the prompt, and it is applied when the continuation is applied ---
based on a wrapper on th prompt tag of the continuation (as opposed to
the prompt tag of the prompt).
