wrap/handle-evt that receives multiple values must have a handler function with adequate arity.
struct.c:
change contract for wrap/handle-evt from (any/c -> any) to procedure?
thread.c:
adjust sync processing
sync.rktl:
add test for handle-evt, wrap-evt and prop:evt
Also, some cleanups of the code and
make the syntax-color/ library docs
point to color:text<%> instead of
color:text% (as the interesting information
is attached to the interface, not the class)
An extflonum is like a flonum, but with 80-bit precision and
not a number in the sense of `number?': only operations such as
`extfl+' work on extflonums, and only on platforms where extflonums
can be implemented by hardware without interefering with flonums
(i.e., on platforms where SSE instructions are used for
double-precision floats).
[Patch provided by Michael Filonenko and revised by Matthew.]
The compiler tracks information about bindings that are known to
hold extflonums, but the JIT does not yet exploit this information
to unbox them (except as intermediate results).
This guarantees that patterns like (? pred pat) will
always check `pred` before matching any of `pat`.
However, `and` patterns are not required to match left-
to-right.
The `+m' flag is a long-overdue shorthand for `++xref-in setup/xref
load-collections-xref', which links to installed documentation in
the same way as DrRacket's "Scribble HTML" button.
That is, use `+m' to link to installed documentation,
scribble +m mine.scrbl
instead of the previously recommended
scribble ++xref-in setup/xref load-collections-xref mine.scrbl
Merge to 5.3.2
There appears to be no way to make `on-demand' work right for the
Unity window manager's global menu bar, since there's no notificiation
when the menu bar is clicked. We approximate the correct behavior
by calling `on-demand' when a containing frame loses the keyboard
focus, which might be because the menu bar was clicked; that may be
too late (because the menu has already been shown), but it should
work most of the time.
Closes PR 13347.
Relevant to PR 13395, but DrRacket will have to change to work
around the remaining limitations of `on-demand'.
The synchronization result of a log receiver is now a vector of four
values, instead of three, where the last one reports the name.
Also, an optional argument to `make-logger' provides a notification
callback for each event sent to the logger.
These changes enable more control over loggers and events. Suppose
that you have processes A and B, and you want all log events of A
to be visible to B, but not vice-versa. Furthermore, you want the
log events to appear at B in the right order: if A logs an event
before B, then A's event should arrive at a log receiver's before
B's. Now that a log receiver gets the name associated with the
original event, and now that the name can be re-sent in a
`log-receiver', it's possible to give A and B separate loggers and
send all of the events from A's logger to B's logger. Furthermore,
you can use the notification callback so that when an event is logged
in B, you can make sure that all available events from from A's
logger have been transferred to B's logger.
One drawback to the current situation (after this commit) is that all
log messages are sent into the user's logger, even messages that come
about as part of DrRacket's implementation. It isn't clear how to fix
this without enumerating all of the possible messages to share and
explicitly forwarding them (both of which are suboptimal things).
On the plus side, the GUI now uses the "debug@GC" notation in a text
field, and when the logger pane is not open, there is no extra work
going on. Plus other, minor GUI improvements.
Put the details consistently with event datatypes, instead
of trying to put them all in `sync', which better reflects
the extensibility of the set of synchronizable events.
A phantom byte string is a small object that the memory
manager treats as an arbitrary-sized object, where the
size is specified when the phantom byte string is created
or or when size is changed via `set-phantom-bytes!'.
Keep track of whether any Racket-managed subprocesses are pending,
and use waitpid(0, ...) only if there is one, to better cooperate
with an embedding environment.
Also, add a chapter to the "Inside" manual to explain the issues.
As long as some thread is ready to run, and in case the threads
synchronize after very little work, keep checking threads for
at least one thread quantum.
When a tag is serializable but not `write'--`read' invariant,
then it needs to be serialized and deserialized.
Also, clarify and check in `tag?' that a tag should be
serializable.
Uses "Github flavored markdown". Specifically, code blocks are opened
using ```scheme so that Github will lex and format them as Scheme code
rather than generic monospace.
Note: I would have used ```racket, but we are still waiting for the
pygments.rb project to pull again from pygments-main -- to which I
contributed a Racket lexer back in August. After pygments.rb pulls,
can update this to use ```racket instead.
Allowing them would require support for immutable fxvectors and
flvectors, interning, and more. Since the motivation for reader
support is to make marshaling and unmarshaling easier, allow
them only in `read' mode. Change printing to make then unquotable.
For example, a new DrRacket window (with a file named tmp.rkt in the
and 356 afterwards. This is under mac os x with, I believe, the
default system font sizes. (The file is important because different
languages can have different buttons in the toolbar and the filename's
length itself can affect the minimum size.)
Mostly this change is the addition of a new kind of panel that
lets its children have multiple fixed sizes (as opposed to
just a single minimum size and (optionally arbitrarily large))
It also adjusts the various toolbar buttons to use this new code.
Also, there's a few tweaks to shrink other things that became the
limiting factor in shrinking the width of the DrRacket window.
Currently, at least for #lang racket programs, the toolbar buttons
along the top of the window are the limiting factor (including the
save button). With a bogus language (ie, #lang rackeeet), the bottom
bar is the limiting factor, since that will have only the Save, Run,
and Stop buttons.
related to PR 13281
Also switches scribble search trampoline to standard DOCTYPE.
Scribble's HTML output currently relies on the quirks-mode
box model for layout of the many tables used in rendering.
However, Scribble doesn't need the rest of the changes in
browser quirks modes, so we choose a DOCTYPE that just
changes the box model.
It's non-obvious how to replicated this formatting with CSS
in standard-mode rendering. Probably a better long term
solution is to move away from table-based layout.
See further discussion on GitHub pull request 158 here:
https://github.com/plt/racket/pull/158
Handle close parentheses in a smarter way while in
auto-parens mode and be a little more smart about
inserting brace pairs in general.
In summary:
- Add some "smart-skip" behavior to insert-close-paren,
described in the documentation.
- When auto-parens mode is enabled,
the existing "balance-parens" keybinding invokes
insert-close-paren with a smart-skip argument of
'adjacent
- A new "balance-parens-forward" keybinding invokes
insert-close-paren with a smart-skip argument of
'forward (whether or not auto-parens mode is
enabled)
- Enable basic smart-skip behavior for
strings ("...") and |...| pairs, specifically, typing
a double-quote or bar character when the cursor
immediately precedes one causes the cursor to simply
skip over the existing one
- Tweak auto-insertion of block comment pairs; i.e.
typing hash and a bar results in a properly balanced
#||# pair. Also, when you type a bar character when
the cursor immediately precedes a closing bar and
hash of a comment, then the cursor skips over both
characters (this seems better than having it just
skip over the bar, and then having to introduce a
new keybinding to detect when a hash is typed while
the cursor is between a bar and a hash)
- In strings and line/block comments, auto-parens mode
no longer has any effect (you can still use the M+..
keybindings to force insertion of a particular brace
pair)
- Detect when a character constant is being typed, and
don't insert brace pairs if so; i.e. if the cursor
is immediately after #\ , then typing any open parens,
double quote, or bar, does _not_ result in the
insertion of an open/close pair even in auto-parens
mode
- Add a bunch of tests related to auto-parens, matching
pairs of braces, strings, comments, etc. to
collects/tests/framework/racket.rkt
Changes the implementation of highlight-range so that it
only recomputes all of the new locations from the positions
when on-reflow is called (otherwise only computing the
relevant ones) and make the on-reflow callback chop itself
up, in case there are lots of highlighted ranges to avoid
tying up the event loop.
Changes searching so that it doesn't neccessarily compute
the entire search results in a single event callback
(but also make it start the computation more aggressively)
Overall, this changes the strategy from one that, for any potentially
long-running callback, just tried to push it off into the future, into
a strategy that tries to avoid long-running callbacks by breaking the
work up into chunks, but starting the first chunk immediately (in a
low-priority callback).
Also, misc other changes to make this work better and generally clean
things up.
For example, the cross-reference information for the
Reference is now broken into about 16 pieces, so that
resolving a cross-reference into the Reference doesn't
require loading all cross-reference information for
the Reference.
Every document is split into two pieces, so that the title
of a document is roughly in its own piece. That way,
re-building the page of all installed documentation can be more
scalable (after some further changes).
The `xref' produced by `setup/xref' uses the database to delay
loading "out.sxref"s, which cuts 64-bit DrRacket's initial
footprint by around 50MB (i.e., about 20%).
popup menu
Extends append-editor-operation-menu-items so that when you
pass an editor and a position, it checks to see if that spot
has a non-string% snip and, if so, copies that one position
(or cuts it, depending).
Then, use that extension in DrRacket
closes PR 12791
It was pulling from `scheme/gui/base', instead. The one from `scheme/gui/base'
is now different and still pulls from `scheme/gui/base'.
This could break some programs that accidentally depended on `scheme/gui/base'
exports from `gui-dynamic-require', but it's more likely to fix problems.
A page-setup dialog is now available on all platforms, which means
that no dialog will appear when a `pirinter-dc%' is created. Meanwhile,
note that `end-doc' normally shows a (different) dialog.
getter/setters instead of overriding a method
this has the benefit that the delegate does not have to be
rebuilt when switching tabs in drracket; we just leave the
old delegate on the old definitions text, and the swap it
back into the editor-canvas when we swap the text% object
itself back in.
Track fixnum results in the same way as flonum results to enable
unboxing, if that turns out to be useful. The intent of the change,
though, is to support other types in the future, such as "extnums".
The output `raco decompile' no longer includes `#%in', `#%flonum',
etc., annotations, which are mostly obvious and difficult to
keep in sync with the implementation. A local-binding name now
reflects a known type, however.
The change includes a bug repair for he bytecode compiler that
is independent of the generalization (i.e., the new test case
triggered the old problem using flonums).
The new function allows declaration of a module dependency, as
opposed to a mere file dependency. Misuse of this function opens
the door to cyclic compilation dependencies, so we have to check
for that in `compiler/cm'.
Also, log a warning when it is used in a position where it
doesn't work rght with the executable creator. I didn't make
this case an error, because `define-runtime-path' can still
work in that case as long as no standalone executable needs
to be created.
