- added invoke-library
syntax.ss, primdata.ss,
8.ms, root-experr*,
libraries.stex, release_notes.stex
- updated the date
release_notes.stex
- libraries contained within a whole program or library are now
marked pending before their invoke code is run so that invoke
cycles are reported as such rather than as attempts to invoke
while still loading.
compile.ss, syntax.ss, primdata.ss,
7.ms, root-experr*
- the library manager now protects against unbound references
from separately compiled libraries or programs to identifiers
ostensibly but not actually exported by (invisible) libraries
that exist only locally within a whole program. this is done by
marking the invisibility of the library in the library-info and
propagating it to libdesc records; the latter is checked upon
library import, visit, and invoke as well as by verify-loadability.
the import and visit code of each invisible no longer complains
about invisibility since it shouldn't be reachable.
syntax.ss, compile.ss, expand-lang.ss,
7.ms, 8.ms, root-experr*, patch*
- documented that compile-whole-xxx's linearization of the
library initialization code based on static dependencies might
not work for dynamic dependencies.
system.stex
- optimized bignum right shifts so the code (1) doesn't look at
shifted-off bigits if the bignum is positive, since it doesn't
need to know in that case if any bits are set; (2) doesn't look
at shifted-off bigits if the bignum is negative if it determines
that at least one bit is set in the bits shifted off the low-order
partially retained bigit; (3) quits looking, if it must look, for
one bits as soon as it finds one; (4) looks from both ends under
the assumption that set bits, if any, are most likely to be found
toward the high or low end of the bignum rather than just in the
middle; and (5) doesn't copy the retained bigits and then shift;
rather shifts as it copies. This leads to dramatic improvements
when the shift count is large and often significant improvements
otherwise.
number.c,
5_3.ms,
release_notes.stex
- threaded tc argument through to all calls to S_bignum and
S_trunc_rem so they don't have to call get_thread_context()
when it might already have been called.
alloc.c, number.c, fasl.c, print.c, prim5.c, externs.h
- added an expand-primitive handler to partially inline integer?.
cpnanopass.ss
- added some special cases for basic arithmetic operations (+, -, *,
/, quotient, remainder, and the div/div0/mod/mod0 operations) to
avoid doing unnecessary work for large bignums when the result
will be zero (e.g,. multiplying by 0), the same as one of the
inputs (e.g., adding 0 or multiplying by 1), or the additive
inverse of one of the inputs (e.g., subtracting from 0, dividing
by -1). This can have a major beneficial affect when operating
on large bignums in the cases handled. also converted some uses
of / into integer/ where going through the former would just add
overhead without the possibility of optimization.
5_3.ss,
number.c, externs.h, prim5.c,
5_3.ms, root-experr, patch*,
release_notes.stex
- added a queue to hold pending signals for which handlers have
been registered via register-signal-handler so up to 63 (configurable
in the source code) unhandled signals are buffered before the
handler has to start dropping them.
cmacros.ss, library.ss, prims.ss, primdata.ss,
schsig.c, externs.h, prim5.c, thread.c, gc.c,
unix.ms,
system.stex, release_notes.stex
- bytevector-compress now selects the level of compression based
on the compress-level parameter. Prior to this it always used a
default setting for compression. the compress-level parameter
can now take on the new minimum in addition to low, medium, high,
and maximum. minimum is presently treated the same as low
except in the case of lz4 bytevector compression, where it
results in the use of LZ4_compress_default rather than the
slower but more effective LZ4_compress_HC.
cmacros,ss, back.ss,
compress_io.c, new_io.c, externs.h,
bytevector.ms, mats/Mf-base, root-experr*
io.stex, objects.stex, release_notes.stex
original commit: 72d90e4c67849908da900d0b6249a1dedb5f8c7f
- added compress-level parameter to select a compression level for
file writing and changed the default for lz4 compression to do a
better job compressing. finished splitting glz input routines
apart from glz output routines and did a bit of other restructuring.
removed gzxfile struct-as-bytevector wrapper and moved its fd
into glzFile. moved DEACTIVATE to before glzdopen_input calls
in S_new_open_input_fd and S_compress_input_fd, since glzdopen_input
reads from the file and could block. the compress format and now
level are now recorded directly the thread context. replaced
as-gz? flag bit in compressed bytevector header word with a small
number of bits recording the compression format at the bottom of
the header word. flushed a couple of bytevector compression mats
that depended on the old representation. (these last few changes
should make adding new compression formats easier.) added
s-directory build options to choose whether to compress and, if
so, the format and level.
compress-io.h, compress-io.c, new-io.c, equates.h, system.h,
scheme.c, gc.c,
io.ss, cmacros.ss, back.ss, bytevector.ss, primdata.ss, s/Mf-base,
io.ms, mat.ss, bytevector.ms, root-experr*,
release_notes.stex, io.stex, system.stex, objects.stex
- improved the effectiveness of LZ4 boot-file compression to within
15% of gzip by increasing the lz4 output-port in_buffer size to
1<<18. With the previous size (1<<14) LZ4-compressed boot files
were about 50% larger. set the lz4 input-port in_buffer and
out_buffer sizes to 1<<12 and 1<<14. there's no clear win at
present for larger input-port buffer sizes.
compress-io.c
- To reduce the memory hit for the increased output-port in_buffer
size and the corresponding increase in computed out_buffer size,
one output-side out_buffer is now allocated (lazily) per thread
and stored in the thread context. The other buffers are now
directly a part of the lz4File_out and lz4File_in structures
rather than allocated separately.
compress-io.c, scheme.c, gc.c,
cmacros.ss
- split out the buffer emit code from glzwrite_lz4 into a
separate glzemit_lz4 helper that is now also used by gzclose
so we can avoid dealing with a NULL buffer in glzwrite_lz4.
glzwrite_lz4 also uses it to writing large buffers directly and
avoid the memcpy.
compress-io.c
- replaced lz4File_out and lz4File_in mode enumeration with the
compress format and inputp boolean. using switch to check and
raising exceptions for unexpected values to further simplify
adding new compression formats in the future.
compress-io.c
- replaced the never-defined struct lz4File pointer in glzFile
union with the more specific struct lz4File_in_r and Lz4File_out_r
pointers.
compress-io.h, compress-io.c
- added free of lz4 structures to gzclose. also changed file-close
logic generally so that (1) port is marked closed before anything is
freed to avoid dangling pointers in the case of an interrupt or
error, and (2) structures are freed even in the case of a write
or close error, before the error is reported. also now mallocing
glz and lz4 structures after possibility of errors have passed where
possible and freeing them when not.
compress-io.c,
io.ss
- added return-value checks to malloc calls and to a couple of other
C-library calls.
compress-io.c
- corrected EINTR checks to look at errno rather than return codes.
compress-io.c
- added S_ prefixes to the glz* exports
externs.h, compress-io.c, new-io.c, scheme.c, fasl.c
- added entries for mutex-name and mutex-thread
threads.stex
original commit: 722ffabef4c938bc92c0fe07f789a9ba350dc6c6
controversial, unless I damaged something in the process of integrating
them with other recent changes. the user's guide and release notes
have been updated as well to reflect the changes of interest to end
users.
- the body of load-library is now wrapped in a $pass-time with
to show the time spent loading libraries separately from the time
spent in expand.
syntax.ss
- interpret now plays the pass-time game
interpret.ss
- added compile-time-value? predicate and
compile-time-value-value accessor
syntax.ss, primdata.ss,
8.ms, primvars.ms, root-experr*
- $pass-stats now returns accurrate stats for the currently timed
pass.
7.ss
- compile-whole-program and compile-whole-library now propagate
recompile info from the named wpo file to the object file
to support maybe-compile-program and maybe-compile-library in
the case where compile-whole-{program,library} overwrites the
original object file.
compile.ss,
7.ms, mat.ss, primvars.ms
- replaced the ancient and unusable bintar with one that creates
a useful tarball for binary installs
bintar
- generated Mf-install InstallBin (InstallLib, InstallMan) now
correctly indirects through InstallPrefix if the --installbin
(--installlib, --installman) configure flag is not present.
src/configure
- removed definition of generate-procedure-source-information
patch.ss
- guardian tconc cells are now allocated in generation 0 in the hope
that they can be released more quickly.
gc.c
- added ftype-guardian syntax: (ftype-guardian A) creates a new
guardian for ftype pointers of type A, the first base field (or
one of the first base fields in the case of unions) of which must
be a word-sized integer with native endianness representing a
reference count. ftype pointers are registered with and retrieved
from the guardian just like objects are registered with and
retrieved from any guardian. the difference is that the garbage
collector decrements the reference count before resurrecting an
ftype pointer and resurrects only those whose reference counts
become zero, i.e., are ready for deallocation.
ftype.ss, cp0.ss, cmacros.ss, cpnanopass.ss, prims.ss, primdata.ss,
gc.c,
4.ms, root-experr*
- fixed a bug in automatic recompilation handling of missing include
files specified with absolute pathnames or pathnames starting with
"./" or "..": was erroring out in file-modification-time with a
file-not-found or other exception rather than recompiling.
syntax.ss,
7.ms, root-experr*, patch*
- changed inline vector-for-each and string-for-each code to
put the last call to the procedure in tail position, as was
already done for the library definitions and for the inline
code for for-each.
cp0.ss,
5_4.ms, 5_6.ms
- the compiler now generates better inline code for the bytevector
procedure. instead of one byte memory write for each argument,
it writes up to 4 (32-bit machines) or 8 (64-bit machines) bytes
at a time, which almost always results in fewer instructions and
fewer writes.
cpnanopass.ss,
bytevector.ms
- packaged unchanging implicit reader arguments into a single record
to reduce the number of arguments.
read.ss
- recoded run-vector to handle zero-length vectors. it appears
we're not presently generating empty vectors (representing empty
groups), but the fasl format permits them.
7.ss
original commit: 7be1d190de7171f74a1ee71e348d3e6310392686
