d76a610426
13 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Matthew Flatt
|
995e53ca71 |
Merge github.com:cisco/ChezScheme
original commit: 8cf52012e2a7b5928cb2602bb17e0128ae0f2776 |
||
|
dybvig
|
d0b405ac8b |
library-manager, numeric, and bytevector-compres improvements
- added invoke-library
syntax.ss, primdata.ss,
8.ms, root-experr*,
libraries.stex, release_notes.stex
- updated the date
release_notes.stex
- libraries contained within a whole program or library are now
marked pending before their invoke code is run so that invoke
cycles are reported as such rather than as attempts to invoke
while still loading.
compile.ss, syntax.ss, primdata.ss,
7.ms, root-experr*
- the library manager now protects against unbound references
from separately compiled libraries or programs to identifiers
ostensibly but not actually exported by (invisible) libraries
that exist only locally within a whole program. this is done by
marking the invisibility of the library in the library-info and
propagating it to libdesc records; the latter is checked upon
library import, visit, and invoke as well as by verify-loadability.
the import and visit code of each invisible no longer complains
about invisibility since it shouldn't be reachable.
syntax.ss, compile.ss, expand-lang.ss,
7.ms, 8.ms, root-experr*, patch*
- documented that compile-whole-xxx's linearization of the
library initialization code based on static dependencies might
not work for dynamic dependencies.
system.stex
- optimized bignum right shifts so the code (1) doesn't look at
shifted-off bigits if the bignum is positive, since it doesn't
need to know in that case if any bits are set; (2) doesn't look
at shifted-off bigits if the bignum is negative if it determines
that at least one bit is set in the bits shifted off the low-order
partially retained bigit; (3) quits looking, if it must look, for
one bits as soon as it finds one; (4) looks from both ends under
the assumption that set bits, if any, are most likely to be found
toward the high or low end of the bignum rather than just in the
middle; and (5) doesn't copy the retained bigits and then shift;
rather shifts as it copies. This leads to dramatic improvements
when the shift count is large and often significant improvements
otherwise.
number.c,
5_3.ms,
release_notes.stex
- threaded tc argument through to all calls to S_bignum and
S_trunc_rem so they don't have to call get_thread_context()
when it might already have been called.
alloc.c, number.c, fasl.c, print.c, prim5.c, externs.h
- added an expand-primitive handler to partially inline integer?.
cpnanopass.ss
- added some special cases for basic arithmetic operations (+, -, *,
/, quotient, remainder, and the div/div0/mod/mod0 operations) to
avoid doing unnecessary work for large bignums when the result
will be zero (e.g,. multiplying by 0), the same as one of the
inputs (e.g., adding 0 or multiplying by 1), or the additive
inverse of one of the inputs (e.g., subtracting from 0, dividing
by -1). This can have a major beneficial affect when operating
on large bignums in the cases handled. also converted some uses
of / into integer/ where going through the former would just add
overhead without the possibility of optimization.
5_3.ss,
number.c, externs.h, prim5.c,
5_3.ms, root-experr, patch*,
release_notes.stex
- added a queue to hold pending signals for which handlers have
been registered via register-signal-handler so up to 63 (configurable
in the source code) unhandled signals are buffered before the
handler has to start dropping them.
cmacros.ss, library.ss, prims.ss, primdata.ss,
schsig.c, externs.h, prim5.c, thread.c, gc.c,
unix.ms,
system.stex, release_notes.stex
- bytevector-compress now selects the level of compression based
on the compress-level parameter. Prior to this it always used a
default setting for compression. the compress-level parameter
can now take on the new minimum in addition to low, medium, high,
and maximum. minimum is presently treated the same as low
except in the case of lz4 bytevector compression, where it
results in the use of LZ4_compress_default rather than the
slower but more effective LZ4_compress_HC.
cmacros,ss, back.ss,
compress_io.c, new_io.c, externs.h,
bytevector.ms, mats/Mf-base, root-experr*
io.stex, objects.stex, release_notes.stex
original commit: 72d90e4c67849908da900d0b6249a1dedb5f8c7f
|
||
|
dybvig
|
7d145e37a8 |
Various enhancements and fixes highlighted by profiling performance
and functionality improvements (including support for measuring
coverage), primitive argument-checking fixes, and object-file changes
resulting in reduced load times (and some backward incompatibility):
- annotations are now preserved in object files for debug
only, for profiling only, for both, or not at all, depending
on the settings of generate-inspector-information and
compile-profile. in particular, when inspector information
is not enabled but profiling is, source information does
not leak into error messages and inspector output, though it is
still available via the profile tools. The mechanics of this
involved repurposing the fasl a? parameter to hold an annotation
flags value when it is not #f and remaking annotations with
new flags if necessary before emitting them.
compile.ss, fasl.ss, misc.ms
- altered a number of mats to produce correct results even
when the 's' directory is profiled.
misc.ms, cp0.ms, record.ms
- profile-release-counters is now generation-friendly; that is,
it doesn't look for dropped code objects in generations that have
not been collected since the last call to profile-release-counters.
also, it no longer allocates memory when it releases counters.
pdhtml.ss,
gc.c, gcwrapper.c, globals.h, prim5.c
- removed unused entry points S_ifile, S_ofile, and S_iofile
alloc.c, externs.h
- mats that test loading profile info into the compiler's database
to guide optimization now weed out preexisting entries, in case
the 's' directory is profiled.
4.ms, mat.ss, misc.ms, primvars.ms
- counters for dropped code objects are now released at the start
of each mat group.
mat.ss
- replaced ehc (enable-heap-check) option with hci (heap-check-interval)
option that allows heap checks to be performed periodically rather
than on each collection. hci=0 is equivalent to ehc=f (disabling
heap checks) and hci=1 is equivalent to ehc=t (enabling heap
checks every collection), while hci=100 enables heap checks only
every 100th collection. allx and bullyx mats use this feature
to reduce heap-checking overhead to a more reasonable level. this
is particularly important when the 's' directory is profiled,
since the amount of static memory to be checked is greatly increased
due to the counters.
mats/Mf-base, mat.ss, primvars.ms
- added a mat that calls #%show-allocation, which was otherwise not
being tested.
misc.ms
- removed a broken primvars mat and updated two others. in each case,
the mat was looking for information about primitives in the wrong
(i.e., old) place and silently succeeding when it didn't find any
primitives to tests. the revised mats (along with a few others) now
check to make sure at least one identifier has the information they
look for. the removed mat was checking for library information that
is now compiled in, so the mat is now unnecessary. the others were
(not) doing argument-error checks. fixing these turned up a handful of
problems that have also been fixed: a couple of unbound variables in the
mat driver, two broken primdata declarations, a tardy argument check
by profile-load-data, and a bug in char-ready?, which was requiring
an argument rather than defaulting it to the current input port.
primdata.ss, pdhtml.ss, io.ms,
primdvars.ms, 4.ms, 6.ms, misc.ms, patch*
- added initial support for recording coverage information. when the
new parameter generate-covin-files is set, the compiler generates
.covin files containing the universe of all source objects for which
profile forms are present in the expander output. when profiling
and generation of covin files are enabled in the 's' directory, the
mats optionally generate .covout files for each mat file giving
the subset of the universe covered by the mat file, along with an
all.covout in each mat output directory aggregating the coverage
for the directory and another all.covout in the top-level mat
directory aggregating the coverage for all directories.
back.ss, compile.ss, cprep.ss, primdata.ss, s/Mf-base,
mat.ss, mats/Mf-base, mats/primvars.ms
- support for generating covout files is now built in. with-coverage-output
gathers and dumps coverage information, and aggregate-coverage-output
combines (aggregates) covout files.
pdhtml.ss, primdata.ss, compile.ss,
mat.ss, mats/Mf-base, primvars.ms
- profile-clear now adjusts active coverage trackers to avoid losing
coverage information.
pdhtml.ss,
prim5.c
- nested with-coverage calls are now supported.
pdhtml.ss
- switched to a more compact representation for covin and covout files;
reduces disk space (compressed or not) by about a factor of four
and read time by about a factor of two with no increase in write time.
primdata.ss, pdhtml.ss, cprep.ss, compile.ss,
mat.ss, mats/Mf-base
- added support for determining coverage for an entire run, including
coverage for expressions hit during boot time. 'all' mats now produce
run.covout files in each output directory, and 'allx' mats produce
an aggregate run.covout file in the mat directory.
pdhtml.ss,
mat.ss, mats/Mf-base
- profile-release-counters now adjusts active coverage trackers to
account for the counters that have been released.
pdhtml.ss,
prim5.c
- replaced the artificial "examples" target with a real "build-examples"
target so make won't think it always has to mats that depend upon
the examples directory having been compiled. mats make clean now
runs make clean in the examples directory.
mats/Mf-base
importing a library from an object file now just visits the object
file rather than doing a full load so that the run-time code for
the library is not retained. The run-time code is still read
because the current fasl format forces the entire file to be read,
but not retaining the code can lower heap size and garbage-collection
cost, particularly when many object-code libraries are imported.
The downside is that the file must be revisited if the run-time
code turns out to be required. This change exposed several
places where the code was failing to check if a revisit is needed.
syntax.ss,
7.ms, 8.ms, misc.ms, root-experr*
- fixed typos: was passing unquoted load rather than quoted load
to $load-library along one path (where it is loading source code
and therefore irrelevant), and was reporting src-path rather than
obj-path in a message about failing to define a library.
syntax.ss
- compile-file and friends now put all recompile information in
the first fasl object after the header so the library manager can
find it without loading the entire fasl file. The library manager
now does so. It also now checks to see if library object files
need to be recreated before loading them rather than loading them and
possibly recompiling them after discovering they are out of date, since
the latter requires loading the full object file even if it's out of
date, while the former takes advantage of the ability to extract just
recompile information. as well as reducing overhead, this eliminates
possibly undesirable side effects, such as creation and registration
of out-of-date nongenerative record-type descriptors. because the
library manager expects to find recompile information at the front of
an object file, it will not find all recompile information if object
files are "catted" together. also, compile-file has to hold in memory
the object code for all expressions in the file so that it can emit the
unified recompile information, rather than writing to the object file
incrementally, which can significantly increase the memory required
to compile a large file full of individual top-level forms. This does
not affect top-level programs, which were already handled as a whole,
or a typical library file that contains just a single library form.
compile.ss, syntax.ss
- the library manager now checks include files before library dependencies
when compile-imported-libraries is false (as it already did when
compile-imported-libraries is true) in case a source change affects
the set of imported libraries. (A library change can affect the set
of include files as well, but checking dependencies before include
files can cause unneeded libraries to be loaded.) The include-file
check is based on recompile-info rather than dependencies, but the
library checks are still based on dependencies.
syntax.ss
- fixed check for binding of scheme-version. (the check prevents
premature treatment of recompile-info records as Lexpand forms
to be passed to $interpret-backend.)
scheme.c
- strip-fasl-file now preserves recompile-info when compile-time info
is stripped.
strip.ss
- removed include-req* from library/ct-info and ctdesc records; it
is no longer needed now that all recompile information is maintained
separately.
expand-lang.ss, syntax.ss, compile.ss, cprep.ss, syntax.ss
- changed the fasl format and reworked a lot of code in the expander,
compiler, fasl writer, and fasl reader to allow the fasl reader
to skip past run-time information when it isn't needed and
compile-time information when it isn't needed. Skipping past
still involves reading and decoding when encrypted, but the fasl
reader no longer parses or allocates code and data in the portions
to be skipped. Side effects of associating record uids with rtds
are also avoided, as are the side effects of interning symbols
present only in the skipped data. Skipping past code objects
also reduces or eliminates the need to synchronize data and
instruction caches. Since the fasl reader no longer returns
compile-time (visit) or run-time (revisit) code and data when not
needed, the fasl reader no longer wraps these objects in a pair
with a 0 or 1 visit or revisit marker. To support this change,
the fasl writer generates separate top-level fasl entries (and
graphs) for separate forms in the same top-level source form
(e.g., begin or library). This reliably breaks eq-ness of shared
structure across these forms, which was previously broken only
when visit or revisit code was loaded at different times (this
is an incompatible change). Because of the change, fasl "groups"
are no longer needed, so they are no longer handled.
7.ss, cmacros.ss, compile.ss, expand-lang.ss, strip.ss,
externs.h, fasl.c, scheme.c,
hash.ms
- the change above is surfaced in an optional fasl-read "situation"
argument (visit, revisit, or load). The default is load. visit
causes it to skip past revisit code and data; revisit causes it
to skip past visit code and data; and load causes it not to skip
past either. visit-revisit data produced by (eval-when (visit
revisit) ---) is never skipped.
7.ss, primdata.ss,
io.stex
- to improve compile-time and run-time error checking, the
Lexpand recompile-info, library/rt-info, library-ct-info, and
program-info forms have been replaced with list-structured forms,
e.g., (recompile-info ,rcinfo).
expand-lang.ss, compile.ss, cprep.ss, interpret.ss, syntax.ss
- added visit-compiled-from-port and revisit-compiled-from-port
to complement the existing load-compiled-from-port.
7.ss, primdata.ss,
7.ms,
system.stex
- increased amount read when seeking an lz4-encrypted input
file from 32 to 1024 bytes at a time
compress-io.c
- replaced the fasl a? parameter value #t with an "all" flag value
so it's value is consistently a mask.
cmacros.ss, fasl.ss, compile.ss
- split off profile mats into a separate file
misc.ms, profile.ms (new), root-experr*, mats/Mf-base
- added coverage percent computations to mat allx/bullyx output
mat.ss, mats/Mf-base, primvars.ms
- replaced coverage tables with more generic and generally useful
source tables, which map source objects to arbitrary values.
pdhtml.ss, compile.ss, cprep.ss, primdata.ss,
mat.ss, mats/Mf-base, primvars.ms, profile.ms,
syntax.stex
- reduced profile counting overhead by using calls to fold-left
instead of calls to apply and map and by using fixnum operations
for profile counts on 64-bit machines.
pdhtml.ss
- used a critical section to fix a race condition in the calculations
of profile counts that sometimes resulted in bogus (including
negative) counts, especially when the 's' directory is profiled.
pdhtml.ss
- added discard flag to declaration for hashtable-size
primdata.ss
- redesigned the printed representation of source tables and rewrote
get-source-table! to read and store incrementally to reduce memory
overhead.
compile.ss
- added generate-covin-files to the set of parameters preserved
by compile-file, etc.
compile.ss,
system.stex
- moved covop argument before the undocumented machine and hostop
arguments to compile-port and compile-to-port. removed the
undocumented ofn argument from compile-to-port; using
(port-name ip) instead.
compile.ss, primdata.ss,
7.ms,
system.stex
- compile-port now tries to come up with a file position to supply
to make-read, which it can do if the port's positions are character
positions (presently string ports) or if the port is positioned
at zero.
compile.ss
- audited the argument-type-error fuzz mat exceptions and fixed a
host of problems this turned up (entries follow). added #f as
an invalid argument for every type for which #f is indeed invalid
to catch places where the maybe- prefix was missing on the argument
type. the mat tries hard to determine if the condition raised
(if any) as the result of an invalid argument is appropriate and
redirects the remainder to the mat-output (.mo) file prefixed
with 'Expected error', causing them to show up in the expected
error output so developers will be encouraged to audit them in
the future.
primvars.ms, mat.ss
- added an initial symbol? test on machine type names so we produce
an invalid machine type error message rather than something
confusing like "machine type #f is not supported".
compile.ss
- fixed declarations for many primitives that were specified as
accepting arguments of more general types than they actually
accept, such as number -> real for various numeric operations,
symbol -> endianness for various bytevector operations,
time -> time-utc for time-utc->date, and list -> list-of-string-pairs
for default-library-search-handler. also replaced some of the
sub-xxxx types with specific types such as sub-symbol -> endianness
in utf16->string, but only where they were causing issues with
the primvars argument-type-error fuzz mat. (this should be done
more generally.)
primdata.ss
- fixed incorrect who arguments (was map instead of fold-right,
current-date instead of time-utc->date); switched to using
define-who/set-who! generally.
4.ss, date.ss
- append! now checks all arguments before any mutation
5_2.ss
- with-source-path now properly supplies itself as who for the
string? argument check; callers like load now do their own checks.
7.ss
- added missing integer? check to $fold-bytevector-native-ref whose
lack could have resulted in a compile-time error.
cp0.ss
- fixed typo in output-port-buffer-mode error message
io.ss
- fixed who argument (was fx< rather than fx<?)
library.ss
- fixed declaration of first source-file-descriptor argument (was
sfd, now string)
primdata.ss
- added missing article 'a' in a few error messages
prims.ss
- fixed the copy-environment argument-type error message for the list
of symbols argument.
syntax.ss
- the environment procedure now catches exceptions that occur and
reraises the exception with itself as who if the condition isn't
already a who condition.
syntax.ss
- updated experr and allx patch files for changes to argument-count
fuzz mat and fixes for problems turned up by them.
root-experr*, patch*
- fixed a couple of issues setting port sizes: string and bytevector
output port put handlers don't need room to store the character
or byte, so they now set the size to the buffer length rather
than one less. binary-file-port-clear-output now sets the index
rather than size to zero; setting the size to zero is inappropriate
for some types of ports and could result in loss of buffering and
even suppression of future output. removed a couple of redundant
sets of the size that occur immediately after setting the buffer.
io.ss
- it is now possible to return from a call to with-profile-tracker
multiple times and not double-count (or worse) any counts.
pdhtml.ss, profile.ms
- read-token now requires a file position when it is handed a
source-file descriptor (since the source-file descriptor isn't
otherwise useful), and the source-file descriptor argument can
no longer be #f. the input file position plays the same role as
the input file position in get-datum/annotations. these extra
read-token arguments are now documented.
read.ss,
6.ms,
io.stex
- the source-file descriptor argument to get-datum/annotations can
no longer be #f. it was already documented that way.
read.ss
- read-token and do-read now look for the character-positions port
flag before asking if the port has port-position, since the latter
is slightly more expensive.
read.ss
- rd-error now reports the current port position if it can be determined
when fp isn't already set, i.e., when reading from a port without
character positions (presently any non string port) and fp has not
been passed in explicitly (to read-token or get-datum/annotations).
the port position might not be a character position, but it should be
better than nothing.
read.ss
- added comment noting an invariant for s_profile_release_counters.
prim5.c
- restored accidentally dropped fasl-write formdef and dropped
duplicate fasl-read formdef
io.stex
- added a 'coverage' target that tests the coverage of the Scheme-code
portions of Chez Scheme by the mats.
Makefile.in, Makefile-workarea.in
- added .PHONY declarations for all of the targets in the top-level
and workarea make files, and renamed the create-bintar, create-rpm,
and create-pkg targets bintar, rpm, and pkg.
Makefile.in, Makefile-workarea.in
- added missing --retain-static-relocation command-line argument and
updated the date
scheme.1.in
- removed a few redundant conditional variable settings
configure
- fixed declaration of condition wait (timeout -> maybe-timeout)
primdata.ss
original commit: 88501743001393fa82e89c90da9185fc0086fbcb
|
||
|
Gustavo Massaccesi
|
6e5ddb6968 |
Add cptypes pass to cp0 to reduce expression using types
- cptypes.ss, ... Thanks to Jon Zeppieri. original commit: af0a075e479e8831c9961102e97db9f00f141fa8 |
||
|
dybvig
|
f7c414bda3 |
Various updates, mostly to the compiler, including a new lambda
commonizatio pass and support for specifying default record
equal and hash procedures:
- more staid and consistent Mf-cross main target
Mf-cross
- cpletrec now replaces the incoming prelexes with new ones so
that it doesn't have to alter the flags on the incoming ones, since
the same expander output is passed through the compiler twice while
compiling a file with macro definitions or libraries. we were
getting away without this just by luck.
cpletrec.ss
- pure? and ivory? now return #t for a primref only if the prim is
declared to be a proc, since some non-proc prims are mutable, e.g.,
$active-threads and $collect-request-pending.
cp0.ss
- $error-handling-mode? and $eol-style? are now properly declared to
be procs rather than system state variables.
primdata.ss
- the new pass $check-prelex-flags verifies that prelex referenced,
multiply-referenced, and assigned flags are set when they
should be. (it doesn't, however, complain if a flag is set
when it need not be.) when the new system parameter
$enable-check-prelex-flags is set, $check-prelex-flags is
called after each major pass that produces Lsrc forms to verify
that the flags are set correctly in the output of the pass.
this parameter is unset by default but set when running the
mats.
cprep.ss, back.ss, compile.ss, primdata.ss,
mats/Mf-base
- removed the unnecessary set of prelex referenced flag from the
build-ref routines when we've just established that it is set.
syntax.ss, compile.ss
- equivalent-expansion? now prints differences to the current output
port to aid in debugging.
mat.ss
- the nanopass that patches calls to library globals into calls to
their local counterparts during whole-program optimization now
creates new prelexes and sets the prelex referenced, multiply
referenced, and assigned flags on the new prelexes rather than
destructively setting flags on the incoming prelexes. The
only known problems this fixes are (1) the multiply referenced
flag was not previously being set for cross-library calls when
it should have been, resulting in overly aggressive inlining
of library exports during whole-program optimization, and (2)
the referenced flag could sometimes be set for library exports
that aren't actually used in the final program, which could
prevent some unreachable code from being eliminated.
compile.ss
- added support for specifying default record-equal and
record-hash procedures.
primdata.ss, cmacros.ss, cpnanopass.ss, prims.ss, newhash.ss,
gc.c,
record.ms
- added missing call to relocate for subset-mode tc field, which
wasn't burning us because the only valid non-false value, the
symbol system, is in the static generation after the initial heap
compaction.
gc.c
- added a lambda-commonization pass that runs after the other
source optimizations, particularly inlining, and a new parameter
that controls how hard it works. the value of commonization-level
ranges from 0 through 9, with 0 disabling commonization and 9
maximizing it. The default value is 0 (disabled). At present,
for non-zero level n, the commonizer attempts to commonize
lambda expressions consisting of 2^(10-n) or more nodes.
commonization of one or more lambda expressions requires that
they have identical structure down to the leaf nodes for quote
expressions, references to unassigned variables, and primitives.
So that various downstream optimizations aren't disabled, there
are some additional restrictions, the most important of which
being that call-position expressions must be identical. The
commonizer works by abstracting the code into a helper that
takes the values of the differing leaf nodes as arguments.
the name of the helper is formed by concatenating the names of
the original procedures, separated by '&', and this is the name
that will show up in a stack trace. The source location will
be that of one of the original procedures. Profiling inhibits
commonization, because commonization requires profile source
locations to be identical.
cpcommonize.ss (new), compile.ss, interpret.ss, cprep.ss,
primdata.ss, s/Mf-base,
mats/Mf-base
- cpletrec now always produces a letrec rather than a let for
single immutable lambda bindings, even when not recursive, for
consistent expand/optimize output whether the commonizer is
run or not.
cpletrec.ss,
record.ms
- trans-make-ftype-pointer no longer generates a call to
$verify-ftype-address if the address expression is a call to
ftype-pointer-address.
ftype.ss
original commit: b6a3dcc814b64faacc9310fec4a4531fb3f18dcd
|
||
|
dyb
|
e7fd8172a0 |
- Added setting of CHEZSCHEMELIBDIRS to s and mats make files so that
an existing setting will not interfere with the build process, and
added a note to BUILDING that CHEZSCHEMELIBDIRS should be unset in
Version 9.5 and before.
s/Mf-base, mats/Mf-base, BUILDING
original commit: 1cccd56693911a38ece784da677e35f724950700
|
||
|
Matthew Flatt
|
2d63f03442 |
support Windows build on Bash/WSL
original commit: 7e4782db08210cbacd1bbe46b3a5e166d8dbe20f |
||
|
Bob Burger
|
831ea8ad18 |
changed copyright year to 2017
7.ss, scheme.1.in, comments of many files original commit: 06f858f9a505b9d6fb6ca1ac97234927cb2dc641 |
||
|
Andy Keep
|
33987d3401 |
reduced tests to conform to the travis-ci limits.
paired the 'partialx' down to just four test configurations, with one interpreter run, to try to get the threaded builds into line with travis-ci's timeout. mats/Mf-base original commit: 6d8c871cd60228755660395e96087878ca9d040f |
||
|
Andy Keep
|
d4461c7122 |
Trying again with a mats/Mf-base that has a reduced list of tests.
original commit: 3beb71c45fc331198c6cd4c58f980425418910b1 |
||
|
Bob Burger
|
39410c8447 |
- Cygwin is now used on Windows, updated mats, eliminated unused killme
- added a cast to eliminate warnings in c/number.c - fixed bug in Windows version of directory-separator-predicate in s/6.ss when path-* procedures are passed a path that is not a string. - fixed bug in s/cp0.ss on Windows with $foreign-wchar?. - fixed spelling of non-existent original commit: dd1b741f7572cb0d5a6210c7c796aee7c4026040 |
||
|
dybvig
|
bf38db8ed9 |
- modified floatify_normalize to properly round denormalized results and
obviated scale_float in the process.
number.c,
ieee.ms
- fixed 0eNNNN for large NNNN to produce 0.0 rather than infinity
strnum.ss,
5_3.ms
- the reader now raises an exception with condition type implementation
restriction (among the other usual lexical condition types), and
string->number now raises #f, for #e<m>@<a>, where <m> and <a> are
nonzero integers, since Chez Scheme can't represent polar numbers other
than 0@<a> and <m>@0 exactly. <m>@<a> still produces an inexact result,
i.e., we're still extending the set of inexact numeric constants beyond
what R6RS dictates. doing this required a rework of $str->num, which
turned into a fairly extensive rewrite that fixed up a few other minor
issues (like r6rs:string->number improperly allowing 1/2e10) and
eliminated the need for consumers to call $str->num twice in cases
where it actually produces a number. added some related new tests,
including several found lacking by profiling. added a couple of
checks to number->string whose absence was causing argument errors to
be reported by other routines.
strnum.ss, exceptions.ss, read.ss
5_3.ms, 6.ms, root-experr*, patch*
- added pdtml flag, which if set to t causes profile-dump-html to be
called at the end of a mat run.
mats/Mf-base
original commit: 03f2fe86171b0fd096238280b351ce365c701450
|
||
|
dyb
|
1356af91b3 |
initial upload of open-source release
original commit: 47a210c15c63ba9677852269447bd2f2598b51fe |