On a 64-bit platform, the test for "short" arguments to
avoid overflow was incorrect, because `(- (expt 2 30))`
counted as short.
original commit: 6d05b70e86987c0e7a07f221ba5def492300aaaf
- zero?, fxzero?, positive?, fxpositive?, etc., now go through
(a suitably modified) relop-length so that, for example,
(zero? (length x)) results in the same code as (null? x). added
correctness tests for these and all of the other predicates that
go through relop-length.
cpnanopass.ss, 5_2.ms
- assertion-violationf and friends now show the who, message, and
irritants in the original call when who or message is found not to
be of the right type.
exceptions.ss
original commit: 9cdc8733cbde4046fd404eefbca6433aabebcef9
In expressions like
(record-ref ... (begin (newline) (record ...)))
the reduction was dropping the possible side effect expressions
in this case the (newline).
cp0.ss
original commit: 5c50c5d1c520c79035065b4bd977eadd8e4cb800
- added compress-level parameter to select a compression level for
file writing and changed the default for lz4 compression to do a
better job compressing. finished splitting glz input routines
apart from glz output routines and did a bit of other restructuring.
removed gzxfile struct-as-bytevector wrapper and moved its fd
into glzFile. moved DEACTIVATE to before glzdopen_input calls
in S_new_open_input_fd and S_compress_input_fd, since glzdopen_input
reads from the file and could block. the compress format and now
level are now recorded directly the thread context. replaced
as-gz? flag bit in compressed bytevector header word with a small
number of bits recording the compression format at the bottom of
the header word. flushed a couple of bytevector compression mats
that depended on the old representation. (these last few changes
should make adding new compression formats easier.) added
s-directory build options to choose whether to compress and, if
so, the format and level.
compress-io.h, compress-io.c, new-io.c, equates.h, system.h,
scheme.c, gc.c,
io.ss, cmacros.ss, back.ss, bytevector.ss, primdata.ss, s/Mf-base,
io.ms, mat.ss, bytevector.ms, root-experr*,
release_notes.stex, io.stex, system.stex, objects.stex
- improved the effectiveness of LZ4 boot-file compression to within
15% of gzip by increasing the lz4 output-port in_buffer size to
1<<18. With the previous size (1<<14) LZ4-compressed boot files
were about 50% larger. set the lz4 input-port in_buffer and
out_buffer sizes to 1<<12 and 1<<14. there's no clear win at
present for larger input-port buffer sizes.
compress-io.c
- To reduce the memory hit for the increased output-port in_buffer
size and the corresponding increase in computed out_buffer size,
one output-side out_buffer is now allocated (lazily) per thread
and stored in the thread context. The other buffers are now
directly a part of the lz4File_out and lz4File_in structures
rather than allocated separately.
compress-io.c, scheme.c, gc.c,
cmacros.ss
- split out the buffer emit code from glzwrite_lz4 into a
separate glzemit_lz4 helper that is now also used by gzclose
so we can avoid dealing with a NULL buffer in glzwrite_lz4.
glzwrite_lz4 also uses it to writing large buffers directly and
avoid the memcpy.
compress-io.c
- replaced lz4File_out and lz4File_in mode enumeration with the
compress format and inputp boolean. using switch to check and
raising exceptions for unexpected values to further simplify
adding new compression formats in the future.
compress-io.c
- replaced the never-defined struct lz4File pointer in glzFile
union with the more specific struct lz4File_in_r and Lz4File_out_r
pointers.
compress-io.h, compress-io.c
- added free of lz4 structures to gzclose. also changed file-close
logic generally so that (1) port is marked closed before anything is
freed to avoid dangling pointers in the case of an interrupt or
error, and (2) structures are freed even in the case of a write
or close error, before the error is reported. also now mallocing
glz and lz4 structures after possibility of errors have passed where
possible and freeing them when not.
compress-io.c,
io.ss
- added return-value checks to malloc calls and to a couple of other
C-library calls.
compress-io.c
- corrected EINTR checks to look at errno rather than return codes.
compress-io.c
- added S_ prefixes to the glz* exports
externs.h, compress-io.c, new-io.c, scheme.c, fasl.c
- added entries for mutex-name and mutex-thread
threads.stex
original commit: 722ffabef4c938bc92c0fe07f789a9ba350dc6c6
add name fields for mutexes and condition variables, now `make-mutex` and `make-condition` accept an optional argument `name`, which must be a symbol or #f. The name, if not #f, is printed every time the object is printed, which is useful for debugging.
original commit: 1397e173200d1697ed714d24fc2eb4767421b976
(and possibly all and only even-numbered releases going forward)
and use 9.5.3 (and possibly all and only odd-numbered releases going
forward) for development.
original commit: 47110f36cea47a44078b3144c82d212de79774ce
- updated version to 9.5.2
bintar/Makefile rpm/Makefile pkg/Makefile BUILDING NOTICE
makefiles/Mf-install.in makefiles/Makefile-csug.in scheme.1.in
c/Makefile.a6nt c/Makefile.i3nt c/Makefile.ta6nt c/Makefile.ti3nt
mats/Mf-a6nt mats/Mf-i3nt mats/Mf-ta6nt mats/Mf-ti3nt workarea
c/scheme.rc s/7.ss s/cmacros.ss release_notes/release_notes.stex
csug/copyright.stex csug/csug.stex rpm/Makefile pkg/Makefile
wininstall/Makefile wininstall/a6nt.wxs wininstall/i3nt.wxs
wininstall/ta6nt.wxs wininstall/ti3nt.wxs
- fixed handling of bintar, rpm, pkg make files
newrelease
- fixed a bug in the fasl representation and reading of mutually
recursive ftypes where one of the members of the cycle is the
parent of another, which manifested in the fasl reader raising
bogus "incompatible record type" exceptions. (The bug could also
affect other record-type descriptors with cycles involving parent
rtds and "extra" fields.) object files created before this fix
are incompatible with builds with this fix, and objects files
created after this fix are incompatible builds without this fix.
fasl.ss, strip.ss,
fasl.c,
ftype.ms,
release_notes.stex
original commit: 766d591c18c2779866d1a059700e6ff1c02cb3c5
- added library-search-handler, compile-whole-library, and improved
packaging to the release notes.
release_notes/release_notes.stex
original commit: 4740211242cf7f010fd66a7c15cf71aea098956c
improved error message for compile-whole-program and
compile-whole-library when a top-level expression is discovered while
processing a wpo file.
compile.ss
original commit: 11cee34502470d720d611ffd0799353e8663a7f1
- fixed failure to install examples for tarball installs
Mf-install.in
- improved packaging support:
replaced bintar script with bintar directory and make file;
tarballs are created via "make create-tarball" and are placed in
the workarea's bintar directory. added rpm directory and make
file for creating RPMs via "make create-rpm". added pkg directory
and make file for creating OSX packages via "make create-pkg".
bintar (removed), bintar/Makefile (new), rpm/Makefile (new),
pkg/Makefile (new), pkg/rmpkg (new), workarea, checkin, newrelease,
Makefile.in, Makefile-workarea.in.
original commit: fdff97d15cd827eb8fbef200c0f495a4bfaefff3
added fix for whole program/library compilation bug with help from
@owaddell who originally reported the problem in issue 386. this bug
arises from the way the parts of the combined library, and their
binary dependencies, are invoked when one of the constituent libraries
is invoked. consider, for example, a combined library that contains
(A) and (B), where (B) depends on a binary library (C). depending on
the sort order of (A) and (B), which may be unconstrained in the
partial ordering established by library dependencies, invoking (A) may
result in the invoke code for (B) being run first, without (B) ever
being explicitly invoked. this can result in bindings required from
(C) by the invoke code in (B) to be unbound. even in the case where
(A) comes before (B) in the topological sort, if they are combined
into the same cluster, (B)'s invoke code will be run as part of
invoking (A). the solution is two part: first we extend the invoke
requirements of the first library in the cluster to include the binary
libraries that precede it in the topological sort and add a dependency
on the first library in the cluster to all of the other libraries in
the cluster. this means no matter which library in the cluster is
invoked first, it will cause the first library to be invoked, in turn
ensuring the binary libraries that precede it are invoked. when there
are multiple clusters, a dependency is added from each cluster to the
first library in the cluster that precedes it. this ensures that
invoking a library in a later cluster first, will still cause all of
the dependencies of the previous clusters to be invoked. ultimately,
these extra dependencies enforce an ordering on the invocation of the
source and binary libraries that matches the topological sort, even if
the topological sort was under constrained. to maintain the property
that import requirements are a superset of the invoke and visit
requirements, we also extend the import requirements to include the
extended invoke requirements. the import requirements are also added
to the dependency graph to further constrain the topological sort and
ensure that we do not introduce artificial cycles in the import graph.
compile.ss,
7.ms,
root-experr*, patch*
original commit: 09bba001a33a5ee9268f1e5cf0cc118e8a2eec7f
exposed the default-library-search-handler and a library-search-handler
parameter to permit more control over the search for libraries during
import, compile-whole-library, and compile-whole-program
original commit: 7b4fdd374f9cb973de1143bfcc830194b36befda
on p to account for the procedure? check at optimize-level 2.
cpletrec.ss
- fixed bug in check-prelex-flags: was hardwiring $cpcheck-prelex-flags
"after" argument to 'uncprep rather than passing along its argument.
compile.ss
- commented out local definition of sorry! so that problems detected
by $cpcheck-prelex-flags actually result in a raised exception.
cprep.ss
original commit: 674e2180d6893000446590038dcacf0ef661e564
InstallPrefix, since it didn't and can't play well with the
generated config.h. Instead removed InstallPrefix entirely so
it isn't an attractive hazzard.
configure, makefiles/Mf-install.in
original commit: 21c8b40bbe4431795824e48042112820872a1fe5
controversial, unless I damaged something in the process of integrating
them with other recent changes. the user's guide and release notes
have been updated as well to reflect the changes of interest to end
users.
- the body of load-library is now wrapped in a $pass-time with
to show the time spent loading libraries separately from the time
spent in expand.
syntax.ss
- interpret now plays the pass-time game
interpret.ss
- added compile-time-value? predicate and
compile-time-value-value accessor
syntax.ss, primdata.ss,
8.ms, primvars.ms, root-experr*
- $pass-stats now returns accurrate stats for the currently timed
pass.
7.ss
- compile-whole-program and compile-whole-library now propagate
recompile info from the named wpo file to the object file
to support maybe-compile-program and maybe-compile-library in
the case where compile-whole-{program,library} overwrites the
original object file.
compile.ss,
7.ms, mat.ss, primvars.ms
- replaced the ancient and unusable bintar with one that creates
a useful tarball for binary installs
bintar
- generated Mf-install InstallBin (InstallLib, InstallMan) now
correctly indirects through InstallPrefix if the --installbin
(--installlib, --installman) configure flag is not present.
src/configure
- removed definition of generate-procedure-source-information
patch.ss
- guardian tconc cells are now allocated in generation 0 in the hope
that they can be released more quickly.
gc.c
- added ftype-guardian syntax: (ftype-guardian A) creates a new
guardian for ftype pointers of type A, the first base field (or
one of the first base fields in the case of unions) of which must
be a word-sized integer with native endianness representing a
reference count. ftype pointers are registered with and retrieved
from the guardian just like objects are registered with and
retrieved from any guardian. the difference is that the garbage
collector decrements the reference count before resurrecting an
ftype pointer and resurrects only those whose reference counts
become zero, i.e., are ready for deallocation.
ftype.ss, cp0.ss, cmacros.ss, cpnanopass.ss, prims.ss, primdata.ss,
gc.c,
4.ms, root-experr*
- fixed a bug in automatic recompilation handling of missing include
files specified with absolute pathnames or pathnames starting with
"./" or "..": was erroring out in file-modification-time with a
file-not-found or other exception rather than recompiling.
syntax.ss,
7.ms, root-experr*, patch*
- changed inline vector-for-each and string-for-each code to
put the last call to the procedure in tail position, as was
already done for the library definitions and for the inline
code for for-each.
cp0.ss,
5_4.ms, 5_6.ms
- the compiler now generates better inline code for the bytevector
procedure. instead of one byte memory write for each argument,
it writes up to 4 (32-bit machines) or 8 (64-bit machines) bytes
at a time, which almost always results in fewer instructions and
fewer writes.
cpnanopass.ss,
bytevector.ms
- packaged unchanging implicit reader arguments into a single record
to reduce the number of arguments.
read.ss
- recoded run-vector to handle zero-length vectors. it appears
we're not presently generating empty vectors (representing empty
groups), but the fasl format permits them.
7.ss
original commit: 7be1d190de7171f74a1ee71e348d3e6310392686
- fixed a bug in which instantiating a static foreign-callable code object
fails with an invalid memory reference because the collector has
discarded its relocation information. foreign-callable code objects
are now flagged as "templates", and the collector now refuses to
discard relocation information for code objects marked as templates
when copying them to the static generation.
cmacros.ss, cpnanopass.ss,
gc.c,
7.ms
- committing updated boot/*/equates.h (without the boot files, which are
still usable for bootstrapping)
boot/*/*.h
- updated release notes
release_notes.stex
original commit: 71d3abba684e04b134720ea1bd9a8c847c38ac5f
fix#389 (apply doesn't throw exception when last argument isn't a list)
fold-primref and fold-primref2 ignored app-convention when
attempting to fold certain primitive calls in 'test and 'effect
context and when falling back on the default primitive handler.
We now residualize primitive references if the app-convention
is not 'call. The original fold-primref2 already bypassed the
inline handler when the app-convention was not 'call.
original commit: f9d10c4cf2e6cd184ad7429f251360a738600959
The `dofretu...*` intrinsics used %ac1 without declaring it as a used
registers, which effectively broke register allocation for handling
string/bytevector foreign-call results or callable arguments.
original commit: 993fb9036acad5445319f458fd971b1a1d8e9f84
Add a parameter to constrain the compiler (off by default) to
implement `+`, `*`, and variants as left-associative when given
multiple arguments.
original commit: d126ba3364893e66263c65af1cd6dbdd8b021439
