When a module is loaded from bytecode and then the value of
`use-compiled-file-paths' changes, an attempt to load a submodule
would fail, because source isn't used if the main module is
already declared, and the bytecode code is not used according to
`use-compiled-file-paths'. Make the bytecode path stick when it
is used once, so that submodule loads succeed, and make it work
even with `namespace-module-attach'.
The module-attach part of this protocol requires a change to the
API of a module name resolver: the notification mode gets two
arguments, instead of one, where the second argument is an
environment.
The new names are `prompt-tag/c` and `continuation-mark-key/c`
to keep the names consistent with the values that are being
contracted. Also updated the HISTORY file.
Add a `#:nothing' argument so the no-value value can be
made explicit --- based on discussion with Eli, but pending
further review.
Also, renamed `#:first' to `#:before-first' and `#:last' to
`#:after-last' to be more clear, more parallel ro `#:before-last',
and avoid a collision with prominent function names.
For all currently supported platforms, the result was already
portable, despite the documentation's hedging.
Also fixed up the documentation in other ways, such as the fact
that `seconds->date' returns a `date*'.
Includes the addition of 'overflow and 'start-overflow-work
events, whcih are effectively specializations of 'sync and
'start-work to expose overflow handling.
Also, fix a bug related to a potential GC during mark-stack
restore from a lightweight continuation.
The new predicates are `progress-evt?' `thread-cell-values?',
`prefab-key?', `semaphore-peek-evt?', and `channel-put-evt?'.
These were used internally, and now they appear in contract
error messages.
A common Slideshow pattern is to put a subset of slides in its
own module with a `run-slides' function, and then you'd
(un)comment a `(run-slides)' call at the end of the module to
work on the subset by itself. Now, you can write
`(module+ main (run-slides))' atthe end of the module and not
have to comment it out. Adding `main' support to the `slideshow'
executable makes it more consistent with using `racket' directly.
Checking first for a `slideshow' submodule makes it possible
for `slideshow' and `racket' to do different things, in case
that's useful.
When supplying an accessor to redirect, either the corresponding field
must be accessible through the current inspector, or a mutator for
the same field must be redirected, too.
Stevie realized that we need this constraint; otherwise, impersonators
can implement mutator-like behavior even when the mutator is otherwise
secret.
Add `raise-argument-error', `raise-result-error', `raise-arguments-error',
and `raise-range-error'.
The old convention was designed for reporting on a single (sometimes very
long line). The new convention is
<name>: <short message>
<field>: <detail>
...
If <detail> is long or itself spans multiple lines, then it may
also use the form
<field>:
<detail>
where each line of <detail> is indented by 3 spaces.
Backtrace information is shown as a multi-line "context" field.
Also, use keywords for `make-pen' and `make-brush'.
Adding `make-pen' and `make-color' creates many conflicts among
teaching libraries, such as `2htdp/image'. These are easy to fix
up in the tree, but adding such obvious names to `racket/draw'
may create other compatibility problems, so we might have to reconsider
the names.
In consultation with Asumu.
The preserved path is exposed by a new `module-path-index-submodule'
function, and `module-path-index-join' now accepts an optional
submodule path.
Also, fixed a problem with `collapse-module-path-index' when
a module path indx is built on a resolved module path that
is a submodule path.
In addition to the main repair, `collapse-module-path[-index]' is
correctly documented to allow '(quote <sym>) rel-to paths.
Finally, `collapse-module-path-index' changed to use a symbolic
resolved module path that appears as the base of a module path
index, rather than falling back to the given rel-to path. It's
possble that the old beavior was intentional, but it wasn't tested,
and it seems more likely to have been a bug.
Closes PR 12724
Before this commit, opening collects/drracket/private/unit.rkt required
about 17.5 megabytes of memory and after this commit, it is down to
about 15 megabytes.
The precise measurement I did was to create a frame and a scheme:text%
object in it, record the result of current-memory-use, open the file,
and record current-memory-use again.
For comparison, using a text:standard-style-list% object instead of
the scheme:text% requires only about 4.1 megabytes. One difference
being that there are about 3x more snips (10,204 vs 33,901 (after the
commit)), since we have one snip for each region that has a different
color in the scheme:text version, and the text:standard-style-list has
no colors and thus about two per line (there are 5006 lines in the
file).
Previously, sandbox creation used `gui?', which is the result of
`gui-available?' at the time that `racket/sandbox' is instanited.
This change makes sandbox behavior less sensitive tothe order in
which modules `require'd into a program are intiantiated.
The change depends on a new `sandbox-make-namespace' default
function for `sandbox-namespace-specs'. The new function uses
either `make-base-namespace' or `make-gui-namespace', depending
on whether the GUI library is available at that point.
A new `sandbox-gui-enabled' parameter can disable use of the
GUI library even if it is available.
The `gui?' binding is still exported for backward compatibility,
but it shouldn't be used anymore.
Treat a "face" as a font description only if it has a comma,
otherwise go back to treating it as a family name.
This change fixes the problem of parsing "Times New Roman"
as "Times New, Roman".
The ActiveX part of MysterX is gone. The `ffi/com' re-imeplemtnation
provides only core COM support.
The "mysssink" DLL is still needed, and its source is still
in the tree, but it is downloaded in the same way as other
pre-built DLLs. The DLL no longer needs to be registered with
regsvr32.
Extend `define-cstruct' to support #:property specs, which causes
the constructor and C->Racket coercsions to wrap the pointer in
a structure instance with the specified properties. Of course,
the wrapper structure has a `prop:cpointer' property so that the
wrapper can be used transparently as a C pointer.
Add missing tests and documentation for the id`->list', `list->'id,
id`->list*', and `list*->'id bindings created by `define-cstruct'.
In particular, allow a pair of a relative-to directory and a base
directory. Paths that syntactically extend the base directory are
recorded as relative to the relative-to directory (which must
syntactically extend the base directory).
The compilation manager now sets the parameter to a pair with
the base directory as the main collection directory, if the source
file's path extends that directory's path.
This generalization solves problems created by cross-module inlining,
where the source location of a procedure in bytecode can now be in a
different file than the enclosing module's file.
Also add a test that checks whether the build directory shows up
in any ".zo", ".dep", or documentation ".html" files.
Closes PR 12549
Rename `read-intern-literal' to `datum-intern-literal'.
Interning is needed only in `read-syntax' or `datum->syntax' to
set up the invariants that the bytecode compiler needs for cross-module
optimization. When `read'ing numbers from a data file, meanwhile,
interning slows things down a lot and doesn't seem worthwhile.
More generally, support a
(define _id (begin 'compiler-hint:cross-module-inline _proc-expr))
hint, which is how the compiler determines that `map', etc., are
candidates for inlining.
Inline only trivial functions, such as `(empty? x)' -> `(null? x)',
to avoid generating too much code.
Bytecode includes a new `inline-variant' form, which records a
version of a function that is suitable for cross-module inlining.
Mostly, the variant let the run-time system to retain a copy
of the bytecode while JITting (and dropping the bytecode of)
the main variant, but it may be different from the main variant
in other ways that make it better for inlining (such a less loop
unrolling).
before the plain text-mode keymap.
Add a doubleleftclick binding to the scheme mode keymap so that
we can have sexp-sensitive double clicking in the drracket editor
and the magic fixup of opening parentheses.
This commit moves the automatic insertion of matching parens to the
scheme mode keymap, so it will now take affect in Racket mode editing,
only. Also, Rackety.
line terminators when:
a) running under windows, and
b) the file on the disk (when DrRacket first opens it)
contains all CRLF line endings.
In all other situations, the file is saved with LF terminators.
Before this commit, DrRacket would always use the platform-specific
convention, regardless of the original content of the file.
closes PR 12242
The `date*' structure type is an extension of `date' with
`nanosecond' and `time-zone-name' fields.
The `seconds->date' function now accepts a real and returns a
`date*'. The fractional part of its argument goes into the
`nanosecond' field.
This is a backwards incompatible change; there is a more complex change
that just stubs this stuff out that may be better that we may need
isntead of this commit.
Macros and other tools that need syntax privilege used
`(current-code-inspector)' at the module top-level to try to
capture the right code inspector at load time. It's more
consistent to instead use the enclosing module's declaration-time
inspector, and `var-ref->mod-decl-insp' provides that. The
new function works only on references to anonymous variables,
which limits access to the inspector.
The real function name is longer, of course.
This makes it correspond to the license page we have on downloads that
talks about the "lesser" GPL rather than the "library" one.
Also, change the file name to have a more friendly .txt suffix, and add
some more responsible properties for things in doc/release-notes.
that apply-reduction-relation* (and thus test-->>) uses
also make apply-reduction-relation* call remove-duplicates
on the result of apply-reduction-relation
