suzanne.soy/FreeCAD
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
5,163 Commits 6 Branches 5 Tags 533 MiB
de7c8fcbbf
Commit Graph

3710 Commits

Author SHA1 Message Date
Przemo Firszt
35c5de0782 FEM: No need to check length, empty list evaluates to False 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-17 10:51:56 +02:00
Przemo Firszt
25c18729e1 FEM: Disable "open editor" and "run ccx" buttons. 
This commit moves checking prerequisites to function. The function
is called before writing .inp file to make sure all required objects
are included in the analysis. "open editor" and "run ccx" buttons are
if check_prerequisites runs successfully.

Reported-by: wmayer
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-17 10:51:56 +02:00
Przemo Firszt
2d90d39cc3 FEM: Make sure cursor gets restored if write_calculix_input_file fails 
Reported-by: wmayer
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-17 10:51:56 +02:00
Przemo Firszt
d3c7270031 FEM: Fix typos 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-17 10:51:56 +02:00
Przemo Firszt
ac5fe442dc FEM: Group all helper functions together 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-17 10:51:56 +02:00
Przemo Firszt
b6ea746fa2 FEM: Rename chooseMat to choose_material 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-17 10:51:56 +02:00
Przemo Firszt
3066e6b3d0 FEM: Use built-in None material if there was no previous material 
Adding material was using by default transient None material that
has no properties assigned. If use accepted that type of material
an attempt to write CalculiX input file was ending up with a crash.
Using built-in None material prevents that situation.

Reported-by: wmayer
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-17 10:51:56 +02:00
Przemo Firszt
6437beaec1 FEM: Use default True value for material dirs 
Defaulting to False was causing problems during migration. The default
checkbox of linked FEM preferences is True, but for the first time users
there was nothing stored in UseBuiltInMaterials, UseMaterialsFromConfigDir
and UseMaterialsFromCustomDir, so the materials were not showing up in
the material ComboBox.

Reported-by: wmayer
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-17 10:51:56 +02:00
Przemo Firszt
76aa89b536 FEM: Catch ccx errors and print to FEM console in red 
Code by wmayer

http://forum.freecadweb.org/viewtopic.php?f=18&t=10514&p=84921#p84901
 2015-04-17 10:51:56 +02:00
Przemo Firszt
2acfadfeef FEM: Change way of converting ccx output to unicode 
Previous method was prone to UnicodeDecodeError. The try-catch for
UnicodeDecodeError stays in as additional safety net.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-17 10:51:56 +02:00
Przemo Firszt
663771f0a4 FEM: Sort materials within each category 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-17 10:51:56 +02:00
Yorik van Havre
6750127a05 Arch: Added materials support 2015-04-15 22:08:54 -03:00
wmayer
38ca5341a6 Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code 2015-04-14 16:34:11 +02:00
wmayer
0c1fb8e4d8 + delay checking for ccx path, handle exceptions 2015-04-14 16:33:44 +02:00
Przemo Firszt
84467808a4 FEM: Use get_material_data in print_mat_data function 
get_material_name provides material name in a safe way, so there is
no need to check in General_name exists in material definition

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-14 15:25:46 +02:00
Przemo Firszt
9eb6cf7480 FEM: Clean code to remove space-after-comma flake8 warning 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-14 15:25:45 +02:00
Przemo Firszt
abefd40bb7 FEM: Add Preferences option to hide materials from user defined directory 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-14 15:25:45 +02:00
Przemo Firszt
1d5b4709fe FEM: Add Preferences option to hide materials from .FreeCAD/Materials directory 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-14 15:25:44 +02:00
Przemo Firszt
32a51db481 FEM: Add Preferences option to hide built in materials 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-14 15:25:43 +02:00
Przemo Firszt
956e5f0da0 FEM: Remove self.params 
It doesn't make sense to pull preferences in __init__ for later use as
they change dependin on user action.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-14 15:25:43 +02:00
Przemo Firszt
5040266320 FEM: Add message about reverting material after user clicked Cancel button 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-14 15:25:42 +02:00
Przemo Firszt
9205db4b77 FEM: Fix problem with lost values after editing material properties 
Now a valid value is stored immediately into object material.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-14 15:25:41 +02:00
Przemo Firszt
75fcae04b9 FEM: Compare material using all properies and handle non-local materials 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-14 15:25:41 +02:00
Przemo Firszt
c091b87459 FEM: Rename comboBox_MaterialsInDir to cb_materials 
The combo box no longer stores materials from just one dir, so name
needs to be changed

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-14 15:25:40 +02:00
Przemo Firszt
8113463e1e FEM: Import all materials in init instead of on-demand import 
On-demand import is no longer good enough as we have 3 different
material directories and materials may have non-unique names.
A material is now identified by a full file path.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-14 15:25:39 +02:00
Przemo Firszt
343225dcc2 FEM: Show material description below combo box 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-14 15:25:39 +02:00
Przemo Firszt
97f5f76433 FEM: Add function for adding materiales from a directory 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-14 15:25:38 +02:00
Przemo Firszt
7cb4df59f7 FEM: Use chooseMat directly set set initial value for material 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-14 15:25:37 +02:00
Przemo Firszt
9a9f7e64a5 FEM: Add icons to materials 
Add icons to distinguish where the material is from. FreeCAD icon for
build-in materials, notmal material icon for materials from user
preferences directory which is "~/.FreeCAD/Materials" on linux or
from an user defined location defined in FEM preferences.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-14 15:25:36 +02:00
Przemo Firszt
f7fd04aa2b FEM: Add option to define custom material directory 
That commit also tidies up FEM preferences, so all file
choosers have the same width

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-14 15:25:36 +02:00
Przemo Firszt
0039ea9e72 FEM: Rename dirname to sytem_mat_dir 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-14 15:25:35 +02:00
Przemo Firszt
54ae984650 FEM: Read materials from user settings directory 
That commit also adds python function getUserAppDataDir that calls
Application::getUserAppDataDir()

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-14 15:25:34 +02:00
Przemo Firszt
b7bb4346da FEM: Fill default ccx binary location in Preferences 
ccx path is filled for linux and windows if it was empty.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-14 15:25:33 +02:00
Przemo Firszt
bf179d9f78 FEM: Add option to define ccx path in Preferences 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-14 15:25:32 +02:00
Sebastian Hoogen
7ddd9d2ce0 check BoundingBox before calling distToShape 
to find intersecting edges. issue #2050
 2015-04-14 10:12:04 -03:00
wmayer
f6638d49ce + improve abaqus export 2015-04-14 13:33:20 +02:00
wmayer
2dc1890fd2 + fix rendering problems for FEM elements 2015-04-13 22:11:27 +02:00
wmayer
1c79de55ed + workaround for limit of length of file names 2015-04-13 18:23:30 +02:00
wmayer
618192fca5 + fix critical memory leak 2015-04-13 17:24:54 +02:00
wmayer
f53fd0fe90 + allow PNG format with POV-Ray 3.7 on Windows 2015-04-13 11:12:14 +02:00
wmayer
0c0365bb49 Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code 2015-04-13 10:33:39 +02:00
wmayer
d9b6007722 + fix wrong template path for Raytracing/Lux project 2015-04-13 10:33:10 +02:00
Yorik van Havre
a7c346606f Material: Fixed bug in cmake file from commit 6685ae0 2015-04-12 19:21:32 -03:00
wmayer
3e1e5974f0 Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code 2015-04-12 18:39:27 +02:00
wmayer
8991b9e04b + add Document::sendMsgToFirstView, fix memory leak 2015-04-12 18:39:01 +02:00
Yorik van Havre
6685ae0142 Material: Added prefix to steel material cards 2015-04-12 13:31:49 -03:00
wmayer
52db9a6cff + set shape color when reading STEP with colors 2015-04-12 12:43:21 +02:00
wmayer
2a5659c36b Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code 2015-04-11 22:30:36 +02:00
wmayer
8476bab7dc + fixes #0001963: Only write needed user data in FCSTD file if any. 2015-04-11 22:30:11 +02:00
Yorik van Havre
5c079f8da7 Arch: small fix in IFC explorer 2015-04-11 14:58:33 -03:00
wmayer
9ea9980b2c + fix bad choose of limit 2015-04-11 01:06:03 +02:00
Bernd Hahnebach
56b15fb690 FEM: CalculiX file, boundaries one line for each axis 2015-04-11 00:17:08 +02:00
Bernd Hahnebach
08be917054 FEM: cheange some Comments in CalculiX input file 2015-04-11 00:16:51 +02:00
wmayer
64b83139c7 + fix highlighting of words with numbers 2015-04-10 23:38:29 +02:00
wmayer
b3cbf2b3da + fix Part.__sortEdges__, check for object type in Part.Wire 2015-04-10 18:25:31 +02:00
Yorik van Havre
0c32b1b0ec Draft: make sure normal is consistent for whole path in PathArray 2015-04-10 12:10:28 -03:00
Yorik van Havre
7a096acccd Arch: Objects with same colors are now exported to IFC with same IfcSurfaceStyle 2015-04-09 21:07:44 -03:00
Yorik van Havre
1f47d2cac0 Arch: added DAE importer patch - fixes #2044 2015-04-09 20:17:37 -03:00
wmayer
e18796efc5 + fix crash of ccx, use darker green for ccx output, fix typos 2015-04-09 23:26:06 +02:00
Ian Rees
4024f46677 Expands list of mesh formats for import/export 2015-04-09 22:15:28 +02:00
Sebastian Hoogen
6a6a3d3bd0 use multiFuse in Draft/Array issue #1971 2015-04-09 20:19:13 +02:00
Przemo Firszt
c774316642 FEM: Unify access rights for FEM svg images 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:45:11 +02:00
Przemo Firszt
9731fc4e4d FEM: Replace hardcoded icon with a normal image file 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:45:11 +02:00
Przemo Firszt
03e5bb55a4 Material: Change PLA material description 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:45:10 +02:00
Przemo Firszt
6c3e3b740b Material: Use MPa for Young's modulus in material definitions 
Scientific notation removed.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:45:10 +02:00
Przemo Firszt
be1240a977 FEM: Change Young's modulus limit 
2000 was way too low and it was causing some unxepected behaviour for
Young's modulud over 2000 kPa

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:45:09 +02:00
Przemo Firszt
3a7f48c632 FEM: Fix typo 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:45:08 +02:00
Przemo Firszt
ab2f1c5d1d FEM: Enable displacement related elements on "Show" only 
Displacement related elements (factor, slider max and the slider itself)
are now only active when "Show" is selected. Previously they were active
even when "Show" wasn't checked and it was potentially confusing for the
user as nothing was changing when chacnging slider settings.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:45:08 +02:00
Przemo Firszt
8489a014d1 FEM: replace vertical factor scroll bar with a horizonal one 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:45:07 +02:00
Przemo Firszt
54bb4e297e FEM: Add "None" and simplify material setting 
The "-->choose Material" has been replaced with a not defined material.
That makes setting/retrieving material to/from the object much easier
and allows user to have a "not defined" material. Previously it wasn't
possible to change i.e. form Steel to "not defined".

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:45:06 +02:00
Przemo Firszt
aec082639f FEM: Clean unused import in MechanicalMaterial.py 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:45:06 +02:00
Przemo Firszt
65396bc95b FEM: Comment out not yet used saveMat function 2015-04-09 19:45:05 +02:00
Przemo Firszt
18aad09d0d FEM: Replace spinBox_young_modulus with input_fd_young_modulus 
spinBox_young_modulus variable is not Gui::SpinBox, but Gui::InputField

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:45:05 +02:00
Przemo Firszt
56bf10afef FEM: Replace duplicated code with print_mat_data function 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:45:04 +02:00
Przemo Firszt
8de8b991a5 FEM: Replace deprecated has_key with in 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:45:04 +02:00
Przemo Firszt
135cfbd80f FEM: Remove unused local variable 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:45:03 +02:00
Przemo Firszt
157a1d8e77 FEM: Fix spaces around =/+/: and brackets 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:45:03 +02:00
Przemo Firszt
5a1249dc3b FEM: Fix white space errors 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:45:02 +02:00
Przemo Firszt
6bfd683dcf FEM: Clean unused imports in MechanicalMaterial.py 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:45:02 +02:00
Przemo Firszt
1ff82e48c6 FEM: Fix copyright date 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:45:01 +02:00
Przemo Firszt
0f9bcc2f84 FEM: Replace deprecated backticks with repr 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:45:01 +02:00
Przemo Firszt
7b01cd6832 FEM: Replace "!=" with "is not" when comparing to None 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:45:00 +02:00
Przemo Firszt
7030aa7482 FEM: Fix white space errors 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:45:00 +02:00
Przemo Firszt
835228ef34 FEM: Fix spaces around =/+/: and brackets 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:44:59 +02:00
Przemo Firszt
40e8f5b020 FEM: Clean unused imports 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:44:58 +02:00
Przemo Firszt
3b46c4e94a FEM: Fix copyright date 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:44:57 +02:00
Przemo Firszt
1af11d9db7 FEM: Rename OutStr to more descriptive fem_console_message 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:44:57 +02:00
Przemo Firszt
b149ba0288 FEM: Make CalculiX execute error message red 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-09 19:44:56 +02:00
Yorik van Havre
fbbc9e21a9 Draft: Improved behaviour of Clone tool when dealing with Arch objects 2015-04-08 21:00:43 -03:00
Yorik van Havre
892b7ae509 Arch: Misc improvements for IFC workflow 
* Added utility to make non-parametric Arch component
* Ability for all Arch components to be a clone of another Arch component of same type
* Modified the Draft Clone tool to produce Arch Clones if applicable
* Fixed Arch Roofs so they can be based on a solid shape like other Arch objects
* Ability to change the Root element to be imported in IFC preferences
* Ability to import IFC files also as compounds, Part shapes or non-parametric Arch objects
* Added an "only" parameter to importIFC.open() to import only a certain object ID.
* Ability to read colors (IfcSurfaceStyle) from IFC objects
 2015-04-08 12:34:48 -03:00
wmayer
176f3e6057 + use correct function to get resource directory 2015-04-05 18:30:35 +02:00
wmayer
960be3c809 + fix memory leak in toBiArcs 2015-04-05 17:19:04 +02:00
wmayer
79de781304 + remove leftover 2015-04-05 16:50:58 +02:00
wmayer
1d1e71b52f + integrate biarcs algorithm 2015-04-05 14:10:03 +02:00
wmayer
453eb18abb + start external editor without blocking GUI 2015-04-03 17:55:51 +02:00
Przemo Firszt
d13c279d5a FEM: Add preferences dialog 
This patch add FEM preferrences dialog. There is currently only
one option to define if internal or external editor should be used to
open CalculiX input .inp files. Disabling internal editor allows to
define path to external editor.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-04-03 08:07:28 +02:00
wmayer
b36c34b105 + fixes #0002033: boolean failure, model refine 2015-04-03 07:39:17 +02:00
wmayer
c519989ec0 + apply patch from Debian to fix build failure of KDL with clang 2015-04-01 16:15:29 +02:00
wmayer
bc9b8bcf19 + support .inp file format 2015-04-01 11:09:46 +02:00
wmayer
9ce46db813 + extend ActionFunction and use in mesh view provider 2015-03-31 01:02:16 +02:00
wmayer
90b5d64831 + remove platform check 2015-03-30 16:36:40 +02:00
wmayer
30098b62e3 FEM: improve Abaqus syntax highlighter 2015-03-30 15:28:08 +02:00
wmayer
ff774748cd + FEM: get nodes by vertex 2015-03-30 11:45:35 +02:00
wmayer
f84a150bfd + choose consistent C++ and Python method names 
+ fix typos
+fix whitespaces
 2015-03-30 10:42:14 +02:00
Bernd Hahnebach
a15ea4ca18 Fem: add Support for loads and supports on edges to CalculiX file 2015-03-30 10:24:38 +02:00
Bernd Hahnebach
e4c2421350 Fem: added Support for more than one Force- and FixedObject in CalculiX file 2015-03-30 10:23:42 +02:00
wmayer
88ef0b58d9 + syntax highlighter for Abaqus, show short filename on tabs 2015-03-28 21:50:01 +01:00
Przemo Firszt
18e4fdf5c2 + FEM: Use existing internal editor for inp files 2015-03-28 19:33:11 +01:00
wmayer
bf7bc3532e Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code 2015-03-28 17:40:36 +01:00
DeepSOIC
89d0a7a176 Sketcher: bugfix: disallow opening when geometry types changed 2015-03-28 17:35:10 +01:00
DeepSOIC
3e6eb430fa Sketcher: small asserts cleanup 2015-03-28 17:35:10 +01:00
DeepSOIC
94c26629c0 Sketcher: add checks for null pointers 
Made throws on null pointers.
 2015-03-28 17:35:10 +01:00
DeepSOIC
5d9b7a4e03 Sketcher: fix repr string for symmetric constr. 2015-03-28 17:19:37 +01:00
Bernd Hahnebach
b4b0ed5c44 Fem: fix: system() is evaluated instead of calling it 2015-03-26 19:38:10 +01:00
blobfish
eba335c615 Part: ModelRefine: catch bspline isEqual exception 2015-03-22 18:43:39 +01:00
wmayer
5ff38ba7d5 + add methods to get GProps from curves and surfaces 2015-03-22 18:39:49 +01:00
wmayer
f87fbe7e2a Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code 2015-03-21 19:56:00 +01:00
Sebastian Hoogen
db13fbb7b3 add angularDeflection property to ViewProvider 
issue #1868
 2015-03-21 19:27:43 +01:00
Yorik van Havre
6a2a20f64b Draft: Fixed children being moved together with section planes 2015-03-21 13:23:23 -03:00
Yorik van Havre
5057f28a49 Drawing: Added SVG pattern generation module 2015-03-21 12:08:05 -03:00
Yorik van Havre
103ee9943d Arch: Added clickable links in IFC explorer 2015-03-21 12:08:05 -03:00
Yorik van Havre
6fb4a7d6f4 Arch: Added more properties needed for green buildings 2015-03-21 12:08:05 -03:00
Yorik van Havre
df074d117e Draft: Fixed arc direction in SVG projections 2015-03-21 12:08:05 -03:00
Yorik van Havre
77f6684dfe Arch: Enabled section filling in Arch drawing views 2015-03-21 12:08:05 -03:00
Yorik van Havre
2afea6c661 Arch: Allow section planes to clip the 3D view 2015-03-21 12:08:05 -03:00
Yorik van Havre
de4fbb94ef Arch: added space types 2015-03-21 12:08:05 -03:00
Yorik van Havre
a6206196f6 Arch: added bimserver and git utilities 2015-03-21 12:08:05 -03:00
Sebastian Hoogen
089174c297 test for default color from preferences in OpenSCAD/Explode command 2015-03-21 13:29:33 +01:00
Sebastian Hoogen
1846087723 improvements in exportDRAWEXE 
fix Draft._clone output
export Shape2DViews
export Part::MultiFuse with single boolean operation like done in c2ce8f5eba
make DRAWEXE ouput more readable
* omit unessary parameters of spheres, cylinders, cones and tori
* denormalize the rotation axis in placements
* use the extension .tcl for the output
 2015-03-21 13:29:32 +01:00
Sebastian Hoogen
01b491b16e use shape.proximity(s) to test for overlapping faces in CSG import 2015-03-21 13:29:31 +01:00
Sebastian Hoogen
565a875365 add shape.proximity(shape) 2015-03-21 13:29:30 +01:00
Przemo Firszt
a53f6818b4 FEM: Add description to massage about CalculiX binary 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-03-21 12:04:11 +01:00
Przemo Firszt
ec27cbc1c6 FEM: Add printCalculiXstdout function 
That non-critical part was quite often silently crashing with
UnicodeDecodeError and as a side effect FreeCAD wasn't loading perfectly
valid CalculiX result file. In long run that function should be replaced
with a write-to-log counterpart and the CalculiX stdout should be shown
to the user only upon request.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-03-21 12:03:56 +01:00
Przemo Firszt
d693051f14 FEM: Add function to show CalculiX state changes 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-03-21 12:03:43 +01:00
Przemo Firszt
e0ed154996 FEM: Warn user about not implemented Loads/Supports 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-03-21 12:03:27 +01:00
Przemo Firszt
0ed9b18367 FEM: Link exisitng calculixError procedure with error signal 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-03-21 12:03:05 +01:00
Przemo Firszt
47b88e47fb FEM: Add message to indicate end of writing CalculiX input file 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-03-21 12:02:52 +01:00
Przemo Firszt
ea640ea104 FEM: fix typos 
machanical -> mechanical
Van Mises -> Von Mises

http://en.wikipedia.org/wiki/Von_Mises_yield_criterion

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-03-21 12:02:36 +01:00
Przemo Firszt
41539d672b FEM: Fix cursor error 
FEM wb was throwing errors:
X Error: BadCursor (invalid Cursor parameter) 6
  Major opcode: 2 (X_ChangeWindowAttributes)
  Resource id:  0x3
X Error: BadCursor (invalid Cursor parameter) 6
  Major opcode: 2 (X_ChangeWindowAttributes)
  Resource id:  0x3
X Error: BadCursor (invalid Cursor parameter) 6
  Major opcode: 95 (X_FreeCursor)
  Resource id:  0x3

according to this [1] that patch should not make any change for windows
and fixes the problem on linux.

[1] https://bugreports.qt.io/browse/PYSIDE-243

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-03-21 12:02:20 +01:00
Przemo Firszt
91e3d30e5b FEM: Replace fem console prints with a function 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-03-16 18:42:02 +00:00
Przemo Firszt
5ed9e816a0 FEM: Show error if results file is missing 
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
 2015-03-16 18:42:02 +00:00
Bernd Hahnebach
5b6360684d Fem: units in CalculiX file: mm and N 2015-03-16 07:29:34 +01:00
Yorik van Havre
0f7ef76d56 Draft: added shoogens fix IRW test 2015-03-15 14:42:36 -03:00
wmayer
b007bd19e4 + improve abaqus exporter 2015-03-15 14:53:22 +01:00
wmayer
5d159f5cf3 + fix crash in export to abaqus 2015-03-15 02:08:55 +01:00
DeepSOIC
08f7afb0e4 PartDesign: fix wrong sketch pad (#1854) 
Fixes the issue where, when a sketch is cloned, and selected for
padding, the clone gets padded instead of the sketch.
It also allows padding of a sketch that is already used by anything
else, except for PartDesign features.
+ the same fix for PartDesign Revolution.
 2015-03-14 14:18:34 +01:00
Bernd Hahnebach
9a6b729694 Fem: typo in thickness property of FemAnalysis class 2015-03-13 10:09:43 -03:00
wood-galaxy
10aa881f72 fix #1991 : display message for dxf library missing 
at the import of importDXF and open, insert and export functions.
Also the message allow user to enabled FreeCAD to download the library.
 2015-03-12 15:22:47 -03:00
wmayer
0063b80937 + fixes #0002001: Crash inserting Raytracing Template when in Image View 2015-03-12 12:45:37 +01:00
wmayer
bafe8d4b14 + set Const attribute to some methods of FemMesh 2015-03-12 10:42:23 +01:00
Sebastian Hoogen
850ca3ac54 trivial bugfix in Draft DXF export 
wrong namespace for Part.OCCError
 2015-03-11 21:35:30 +01:00
wmayer
9ba57683d5 + method to get Eigensystem of mesh data 2015-03-10 22:47:46 +01:00
wmayer
cc7c1d1f44 + fix assert failure in FemMesh 2015-03-10 12:44:22 +01:00
Yorik van Havre
0009e58291 Merged crowdin translations 2015-03-07 15:17:58 -03:00
Bernd Hahnebach
89a6e67e35 Fem: ContraintForce: units are no longer printed on widget 2015-03-06 17:03:35 +01:00
Bernd Hahnebach
4a8e1a58b0 Fem: Fix in CalculiX file if not supported shapes are used for constraints 2015-03-06 17:03:22 +01:00
Bernd Hahnebach
baba11610a FEM: add comments to CalculiX input file 2015-03-05 22:31:04 +01:00
Eivind Kvedalen
3743008cda - Self-reference bug 
- Refactoring/clean-up of code
- Dependency tracking of aliased cells
- Various resolution errors
- Rewriting of ranges when columns/rows are inserted/removed
- References to aliases keep their units.
 2015-03-04 22:18:20 +01:00
Yorik van Havre
21211aeff2 Draft: Fixed translation of snap bar 2015-02-28 16:45:04 -03:00
Stefan Tröger
d5ee7a6efe implement correct vertex normals 
- use mesh vertices uv value to get correct normals from face
- remove unused normal and shading options for parts
 2015-02-28 15:09:38 +01:00
wmayer
d29d62b4ab + fix linker error with MSVC 2012 2015-02-28 12:42:27 +01:00
wmayer
bebca4e54c Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code 2015-02-27 23:28:04 +01:00
wmayer
b24f25d874 + in Fem constraint force dialog handle empty Direction 2015-02-27 23:27:08 +01:00
Yorik van Havre
8d8eba6dac Updated ts files from source 2015-02-27 18:56:51 -03:00
Yorik van Havre
8d98921dd7 Updated translations from crowdin 2015-02-27 18:46:03 -03:00
Yorik van Havre
9e67696fd5 Material: Added missing units 2015-02-27 13:31:13 -03:00
wmayer
2a4d29d0ac + use undo/redo for Fem constraint force dialog 2015-02-27 11:21:05 +01:00
Bernd Hahnebach
d44d0fbda3 Fem Workaround for choosing material data 2015-02-26 23:26:11 +01:00
Bernd Hahnebach
fb908f6f82 make main material cards to work correctly with FemWB 2015-02-26 21:25:59 +01:00
Bernd Hahnebach
b42ea802b5 Fem make CalculiX Inputfile editable befor run CalculiX 2015-02-26 09:56:58 -03:00
Bernd Hahnebach
d5d6b08980 Standard CalculiX Material added 2015-02-26 09:56:58 -03:00
Sebastian Hoogen
75ced60a58 + fixes #0001966: edges in Shape2DView extend beyond endpoint 2015-02-25 18:45:40 -03:00
Yorik van Havre
67d303ae85 Arch: removed old debug message 2015-02-25 18:44:45 -03:00
wmayer
f69b38dcde + fix doc string of Part.makeLoft 2015-02-25 21:36:40 +01:00
Sebastian Hoogen
ed80eb6c35 enter rubberband after moved by dragIgnoredDistance 
issue #1149
 2015-02-24 23:51:11 +01:00
Bernd Hahnebach
a6dd8870ab Fix Fem Find Calculix binary (if installed) on Linux 2015-02-24 17:12:50 +01:00
Bernd Hahnebach
38eaf76dea Fix Fem DirectionVector of the ForceObject 2015-02-24 17:12:34 +01:00
Bernd Hahnebach
08a5a89847 Fix Fem we do not have initial stresses 2015-02-24 17:12:14 +01:00
Sebastian Hoogen
a77106a58f adapt importCSG to makeFace property and change in importDXF 
in commit 06a689eff2
 2015-02-24 16:36:25 +01:00
Yorik van Havre
627e32aa2c Arch: misc bugfixes in IFC export 2015-02-23 19:34:29 -03:00
wmayer
007f939731 + check for correct OCC version 2015-02-23 16:05:17 +01:00
Yorik van Havre
2fdb1aeeff Draft: do not show Draft Tray toolbar when importing only the Draft module 2015-02-22 21:29:34 -03:00
wmayer
b5b54c59f1 + fix for OCC 6.3 2015-02-22 18:41:18 +01:00
wmayer
153e988237 + make argument of multiFuse const reference 2015-02-21 12:48:12 +01:00
Sebastian Hoogen
c2ce8f5eba add TopoShape::multiFuse method 
to fuse multiple shapes at once.
 2015-02-21 12:35:21 +01:00
Sebastian Hoogen
acfafc0b2b Use multiple tool shapes for MultiFuse Feature 
issue #1971
 2015-02-21 12:35:20 +01:00
wmayer
312f63e43e + edit command for meshes to display components 2015-02-20 22:28:37 +01:00
wmayer
18f1cf7821 + fix issue with bad default value of natural direction 2015-02-20 14:40:03 +01:00
wmayer
22b63a7653 + fix ambiguous shortcuts 2015-02-18 13:07:42 +01:00
DeepSOIC
aeabffeed8 Sketcher: bugfix in updating constraints after external geometry delete 2015-02-17 12:27:32 +01:00
DeepSOIC
13406a4daf Sketch:Validation: swap endpoints for reversed + constraint orientation locking controls 
Added buttons to port sketches to CCW-emulation Sketcher.

Bonus =) : Added constraint orientation lock/unlock buttons (affects
point-wise modes of tangent and perpendicular constraints so far)
 2015-02-17 12:27:32 +01:00
DeepSOIC
0767cd35f8 Sketcher: fix reversed geometry and rotated arcs 
Fixes a bug where an arc, ellipse, or arc-of-ellipse, being reversed in
XY plane, behaved badly in sketcher (see forum thread "Sketch: how to
handle reversed external arcs?"
http://forum.freecadweb.org/viewtopic.php?f=10&t=9130 ).
Also fixes a problem with rotated arcs (see forum thread "Rotating Arc
in Sketcher"
http://forum.freecadweb.org/viewtopic.php?f=22&t=9145#p74262 ).

This is done by adding an emulation flag to a few methods in
Part::GeomXXX, which makes the shape to pretend being non-reversed
(CCW). This causes endpoints of reversed arcs of circles lineked as
external geometry to swap, causing broken sketches sometimes.
 2015-02-17 12:27:31 +01:00
Abdullah Tahiri
0b081876e5 Ellipse: External geometry rotated fix 
This commit solves the problem that a ellipse appears rotated when added as external geometry, if the face having the
elliptical shape has a direction vector in the -z axis.

This solves the problem. However, the issue with CW and CCW shapes in the sketcher shall be further investigated in order
to arrive to a general acceptable solution.
 2015-02-17 12:27:31 +01:00
Eivind Kvedalen
c3af4232a4 Spreadsheet: getProperty does not return 0 when property is not found, but throws an exception. Handle this instead. 2015-02-17 11:47:56 +01:00
Eivind Kvedalen
4ab13b9fea Spreadsheet: Remove empty set from documentObjectToCellMap. 2015-02-17 11:47:11 +01:00
Eivind Kvedalen
43e777c7e5 Spreadsheet: docDeps property was not properly maintained, resulting in spurious links to other objects. 2015-02-17 11:46:12 +01:00
Eivind Kvedalen
2621c22409 Spreadsheet: Don't return error message when custom attribute is not found. 2015-02-17 11:45:30 +01:00
Eivind Kvedalen
1b43ca109b Spreadsheet: Consistently use App::Document::Label as reference for document names when tracking dependencies. 2015-02-17 11:44:55 +01:00
Eivind Kvedalen
1f94a15869 Fixed crash when setting/resetting bold/italic/underline on empty cells. 2015-02-17 11:44:21 +01:00
Yorik van Havre
423e700e8a Arch: fixed support of 2D entities in IFC importer 2015-02-16 12:20:29 -02:00
Yorik van Havre
9b4b46f1d0 Arch: small fix in DAE importer 2015-02-15 23:41:46 -02:00
Yorik van Havre
0bb651da4d Updated translation files 2015-02-14 12:16:39 -02:00
Yorik van Havre
7bbdb0a333 Spreadsheet: Added translation file 2015-02-14 12:15:01 -02:00
Yorik van Havre
0b0f6cf215 Spreadsheet: Added back old python spreadsheet code for archiving purposes 2015-02-14 12:03:22 -02:00
wmayer
f54da66bd3 + remove unused variable 2015-02-13 22:13:38 +01:00
Eivind Kvedalen
d153fb2dbd + Fixed merge of cells to retain value in upper left cell+ Replaced std::map::at() with iterators and find. Removed some superfluous calls to std::map::find() 
+ Visual Studio fixes
+ Fixed return values
+ Removed unused variables
 2015-02-13 21:53:59 +01:00
Eivind Kvedalen
383ffa6e15 Initial implementation of Spreadsheet module (C++ version) by Eivind Kvedalen. 
Various fixes for Windows by
Peter Lama <peterldev94@gmail.com>
Werner Mayer <wmayer@users.sourceforge.net>
 2015-02-13 21:53:58 +01:00
Yorik van Havre
5a9d79ac94 Draft: Fixed DXF imorter for non-GUI operation - fixes #1961 2015-02-13 16:49:29 -02:00
Yorik van Havre
40f0927705 Arch: Adapted IFC importer for new IfcOpenShell6 
Squashed following commits:
* Arch: Adapted IFC importer for IfcOpenShell6
* Arch: further fixes for ifcopenshell6 compatibility
* Arch: IFC importer now converts to/from  meters for better compatibility with IfcOpenShell
* Arch: further fixes with ifcopenshell6
* Arch: precision adjustments in IFC exporter
* Arch: small fix in makeRoof
 2015-02-13 16:41:34 -02:00
Yorik van Havre
6202476061 Draft: made new DXF libraries dialogs translatable 2015-02-13 16:01:16 -02:00
wood-galaxy
c516b2456e Draft : Show dialog if DXF libraries not found/not downloadable 2015-02-13 15:31:50 -02:00
wmayer
e551c4ef28 + write out material information for x3d format 2015-02-13 17:26:49 +01:00
Sebastian Hoogen
192a32d8d1 refuse to change the placement of PartDesign::Feature Objects 
in OpenSCAD/Explode Group command
 2015-02-13 00:40:27 +01:00
Yorik van Havre
cd5783ac2e Draft: fixed importSVG - fixes #1964 2015-02-12 11:57:39 -02:00
Sebastian Hoogen
cd771f65c6 meshing was removed from StlTransfer 
with OCCT CR0025357 issue #1906
 2015-02-12 13:46:14 +01:00
Yorik van Havre
4bb365f9b6 Draft: Small fix in DXF importer - fixes #1961 2015-02-12 13:46:14 +01:00
Yorik van Havre
f99b6cf534 Fixed typo 2015-02-12 13:46:13 +01:00
Yorik van Havre
f278c297fd Drawing: reset the default template to the classic one 2015-02-12 13:46:13 +01:00
Sebastian Hoogen
12407a1057 disable conversion of BSplines to circles in SVG drawing output 
partly revert 0a31bebaed
 2015-02-10 15:45:34 +01:00
Yorik van Havre
7b34d02c4c Draft: re-added Draft-Drawing tool to DraftWB 2015-02-09 12:26:41 -02:00
Johannes Obermayr
4ef4369d09 Mod/Complete: Check for modules at runtime.This fixes runtime errors if e. g. TestGui isn't installed due to -DBUILD_TEST=OFF ... 2015-02-08 16:37:14 +01:00
Johannes Obermayr
b63c5d0e04 Mod/Complete: Check for modules at runtime. 
This fixes runtime errors if e. g. TestGui isn't installed due to -DBUILD_TEST=OFF ...
 2015-02-08 16:24:04 +01:00
Sebastian Hoogen
faac8c36ba add encoding parameter to .as_std_string() 
to handle PyUnicode Objects. Usually ASCII for object names and Utf-8
for file names and console output.
issue #995
 2015-02-08 15:37:00 +01:00
Sebastian Hoogen
8ee81e0516 set the max. segments in BSpline approximation to 50 
in Draft and Drawing WBs
 2015-02-08 15:14:32 +01:00
Sebastian Hoogen
8ec87dbdf2 rename python classes for shapes and 
implememnt __getstate__ and __setstate__ to enable pickling
issue #1948
 2015-02-04 17:07:29 +01:00
wmayer
79173e37cd + correct usage of SoPolygonOffset 2015-02-02 14:18:16 +01:00
wmayer
65c56d0bd6 +support to write/read colors to/from OFF file 2015-02-02 09:59:02 +01:00
Yorik van Havre
dc623f2646 Fixed a typo 2015-01-27 13:57:49 -02:00
Yorik van Havre
8628a6e0e0 Draft: small fix in SVG generation 2015-01-26 17:38:30 -02:00
Yorik van Havre
d8146a0cf8 Updated ts files 2015-01-26 16:23:48 -02:00
Yorik van Havre
6ffc0e177a Drawing: small fix in DraftView command 2015-01-26 16:00:13 -02:00
wmayer
97987db462 + fix problems on unit tests, open transaction when creating distance object, layout warning, ... 2015-01-25 14:04:33 +01:00
wmayer
683e342cff + fix linker error with MSVC 2015-01-25 12:22:04 +01:00
Sebastian Hoogen
5a9484f06c round the drawing view projection direction 
before calculating the necessary view rotation to anticipate the
rounding that happens on saving and reloading the file. fixes #1909
 2015-01-24 23:37:38 +01:00
wmayer
be38772631 + fixes #0001482 2015-01-24 16:32:21 +01:00
wmayer
ed46ec272f + slight fix in file filter 2015-01-24 16:31:49 +01:00
Yorik van Havre
9b345d8264 Arch: Corrected some texts 2015-01-23 12:45:11 -02:00
Yorik van Havre
06a689eff2 Draft: Added warning dialog against heavy DXF import operations - fixes #1685 2015-01-22 12:21:15 -02:00
Sebastian Hoogen
d059520046 Use splines in dxf drawing output 2015-01-20 20:08:40 -02:00
Sebastian Hoogen
c05f7762f8 import dxf splines as Draft BezCurve if applicable 
fixes 1743
 2015-01-20 20:07:25 +01:00
Sebastian Hoogen
17a85e4352 Set offset mode for extrusion draft 2015-01-20 11:30:13 +01:00
Sebastian Hoogen
9c698201e2 handle Draft Ellipse arcs 2015-01-20 11:28:17 +01:00
Sebastian Hoogen
2509e59b51 catch non-orthogonal transformation matrix 
bugfix for f045df1ef3
 2015-01-20 11:26:39 +01:00
Yorik van Havre
a91fcc681c Draft: Improvements to Trimex tool - fixes #1598 
* Autotrim 2 intersecting draft lines, wires or arcs
* Don't snap if CTRL is not pressed
* Allow to trim/extend against itself
 2015-01-19 13:49:33 -02:00
Yorik van Havre
767d7b442a Draft: fixed leftovers from last commit 2015-01-18 13:44:56 -02:00
Yorik van Havre
044c1c0ef1 Draft: More robust method to write DXF arcs 2015-01-18 13:42:17 -02:00
Yorik van Havre
8fbe631046 Draft: Fixed svg export view box - fixes #1810 2015-01-17 12:51:09 -02:00
wood-galaxy
1de729d6e9 + fixes #0001923: Fix typo for a string within the Arch wokbench 2015-01-17 11:41:22 +01:00
wmayer
1f44226882 + copy DiffuseColor property when creating simple copy 2015-01-16 23:31:07 +01:00
wmayer
f5c363db9d + fixes #0001922: occ exception during python shell.makeHalfSpace 2015-01-16 23:11:07 +01:00
Yorik van Havre
79458a83d0 Draft: minor fix in up/downgrade 2015-01-16 19:57:39 -02:00
Yorik van Havre
62b0498e6f Draft: Added a recompute() at the end of Upgrade and Downgrade 2015-01-16 18:05:02 -02:00
Yorik van Havre
90540deb29 Arch: Removed Create from Scratch option from presets - fixes #1835 2015-01-16 17:34:24 -02:00
Yorik van Havre
f0ce2e6be6 Moved Draft-Drawing tool to the Drawing WB (renamed Draft View) 2015-01-16 17:16:39 -02:00
Sebastian Hoogen
0aabd2d5ec importDXF: bugfix for handling weights in splines 2015-01-16 18:22:42 +01:00
Sebastian Hoogen
c90c2441d2 importDXF: provide polygon fallback for splines 
with invalid multiplicities
 2015-01-16 15:10:31 -02:00
Sebastian Hoogen
ad54783016 improve DXF spline import 2015-01-16 15:10:31 -02:00
Yorik van Havre
9de492592d Draft: SVG linestyles are now settable in preferences - fixes #1773 2015-01-15 17:58:52 -02:00
Yorik van Havre
06e78d70c9 Draft: Upgrade tool now supports sketches with circles or ellipses - fixes #1881 2015-01-15 17:15:27 -02:00
wood-galaxy
f72c802f5d Arch CutPlane : Fix some strings to be translatable 2015-01-15 10:27:49 -02:00
wood-galaxy
73c342e05c Arch Roof : Improvement on gable case 2015-01-15 10:26:43 -02:00
wood-galaxy
16564430a1 Arch Roof : Add units in column header. 2015-01-15 10:26:43 -02:00
wmayer
ee4436b2c0 + add toShape() to Part.Point, allow to pass Part.Point in Part.Vertex 2015-01-15 11:39:53 +01:00
wmayer
17099d0545 + fixes #0001916: Cannot cancel angle constraint dialogue in sketcher 2015-01-15 00:36:44 +01:00
Sebastian Hoogen
f045df1ef3 avoid using transformGeometry in importSVG 2015-01-14 11:56:45 -02:00
Yorik van Havre
ae3fafea6c Updated base translation files for crowdin 2015-01-13 20:00:09 -02:00
Yorik van Havre
7a710279ad Draft: Fixed continued dimension - fixes #1891 2015-01-13 19:07:05 -02:00
wmayer
fa4f8b0735 + do not throw exception from inside signal handler to get useful stack trace for segmentation faults 2015-01-13 22:01:59 +01:00
wmayer
395d5249d4 + minor change 2015-01-13 21:54:54 +01:00
wmayer
477099bbfe + remove useless stuff from Init files 2015-01-13 16:19:19 +01:00
Yorik van Havre
7d0dc068e4 Draft: Allow to draw lines by length & angle - fixes #1383 
* Added a Length property to Draft line objects
* Added length & angle parameters to the line drawing tool
 2015-01-13 12:10:52 -02:00
wmayer
5289967304 + fixes #0001482: v0.14 Mirrored objects parent the original object 2015-01-13 00:03:20 +01:00
wmayer
eb9b6acdd6 + re-enable reading/writing grid size 2015-01-12 16:29:31 +01:00
wmayer
3f03e954da + fixes #0001914: A4_Landscape_ISO7200 2015-01-12 11:27:30 +01:00
Richard Crozier
65092be5f3 Correct spelling of FEM Netgen Mesh 'Fineness' parameter 2015-01-12 11:12:30 +01:00
wmayer
c6fe925dfd + fixes #0001856: Add standard set of blank ISO drawing template sizes 2015-01-12 01:56:14 +01:00
wmayer
c9a70c7f03 Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code 2015-01-12 01:44:13 +01:00
wmayer
b437dfd9da + fixes #0001912: Drawing Workbench Not Displaying Views of Cylindrical Parts. 2015-01-12 01:43:48 +01:00
Yorik van Havre
4cf15ae696 Draft: implemented new, more robust version of sortEdges - fixes #1911 2015-01-11 22:09:29 -02:00
wmayer
e16305cb83 + fixes #0001791: Counterbores do not follow when hole is moved 2015-01-12 00:55:56 +01:00
Yorik van Havre
af65c413d1 Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code 2015-01-11 15:55:32 -02:00
Yorik van Havre
74856e5fbf Draft: Dimensions ExtLines property can now be negative - fixes #1677 2015-01-11 15:55:19 -02:00
wmayer
0b904e674b + support Bezier curves for SVG output 2015-01-11 16:02:27 +01:00
wmayer
82edb4b50a + fixes #0001662: IGES does not export correctly 2015-01-11 12:14:41 +01:00
wmayer
0a31bebaed + fixes #0001898: Drawing workbench draws cylinder in orthographic projection wrong 2015-01-11 01:46:31 +01:00
wmayer
9cb8471fa2 + fixes #0001856: Add standard set of blank ISO drawing template sizes 2015-01-10 22:21:20 +01:00
wmayer
2e91cd1000 + add new templates from triplus 2015-01-10 22:19:46 +01:00
wmayer
3210d0d2a0 + issue #0001856: Add standard set of blank ISO drawing template sizes 2015-01-10 19:09:58 +01:00
wmayer
0954adf784 Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code 2015-01-10 15:15:42 +01:00
wmayer
6a3437e28e + fixes #0000692: Sketcher: Add angle constraint for arcs 2015-01-10 15:15:18 +01:00
Sebastian Hoogen
ff8ad03aa3 bugfix in dxf output of arc 
regression created by 099ece5c00
 2015-01-10 12:09:00 -02:00
Sebastian Hoogen
fe4ab358e5 issue #1450 2015-01-10 12:09:00 -02:00
wmayer
2bff32d704 Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code 2015-01-10 12:17:57 +01:00
Yorik van Havre
183a0f066b Draft: Fixed typo - fixes #1907 2015-01-09 20:46:07 -02:00
Yorik van Havre
02eecc4fd7 Draft: small bug in Draft GUI - fixes #1908 2015-01-09 20:43:33 -02:00
wmayer
396e9c93b7 + fixes #0001553: printing drawing full size (1:1) prints wrong size 2015-01-09 21:15:27 +01:00
wmayer
ddfb525c87 + fixes #0000932: Unexpected scaling of a printed Drawing From FreeCAD but not always from exported SVG 2015-01-09 14:00:18 +01:00
wmayer
311ba87b6c + issue #0000932: Unexpected scaling of a printed Drawing From FreeCAD but not always from exported SVG 2015-01-07 19:35:52 +01:00
wmayer
f24e216db4 + fixes #0001652: Proper support of units for all geometric primitives 2015-01-07 15:31:07 +01:00
wmayer
be2e191681 + fixes #0001669: Part operation with parts in groups splits again when moved back into group 2015-01-07 11:02:52 +01:00