=======================================================================================
ActSketch in ViewProvider dissapears. The temporal sketch (sketch.cpp) for solving is now a data member of SketchObject.cpp (hereinafter solvedSketch). All the solving is concentrated in SketchObject.cpp.
SketchObject provides an interface to expose its solver, as it is still currently needed for some UI operations from ViewProviderSketch, like dragging points (solving rubber bands).
ViewProviderSketch still can select whether to draw the solvedSketch geometry (previously ActSketch) geometry (UI staff) or the SketchObject geometry. Performancewise, it makes sense to separate this two
geometries, as the SketchObject one involves modifying the Geometry and Constraint Properties (including all the undo related functionality), which would mess the undo functinality and incur in a big
peformance penalisation while dragging. One characteristic of solvedSketch is that its geometry is solved, whereas the geometry of SketchObject may not have been solved yet.
These geometries may differ at for the following reasons:
1. The geometry corresponds to an ongoing dragging operation, so solvedSketch has the last calculated dragging geometry, while SketchObject has the one corresponding to initial position.
2. Geometry/constraints were added to the sketch, but no solve/execute was triggered yet (envisioned situation is the future group creation functionality not in this commit).
What do I gain?
- Inserting a (simple) geometry element now costs 1 solver execution.
- Inserting a constraint now costs 1 solver executions.
For reference, in previous versions inserting a constraint involved 5 solver executions.
The following information provide a historical review of the coding of this commit (formed of 10 squashed commits):
This is a general sketch solve call reduction, not only during geometry creation (this commit does not include until here any specific measure to reduce calls on geometry creation, that is another branch)
After a lot of profiling, it seems that the "cause"(tm) that creates so many solver calls is that every update generates a solving in ViewProviderSketch, regardless of the need for that update,
many times with the only aim of providing the DoF for the message dialog and keeping ActSketch in sync with SketchObject in case it is needed (currently UI moving points, constraints,...).
Sketch solver is now a data member of SketchObject instead of a temporal object that gets initilized and destroyed.
This allows:
1. Potentially more synergy reducing calls to setUpSketch (still to be seen, still to be optimized)
2. Allowing SketchObject to access the latest geometry that has been solved => In future, allow objects that use SketchObject to obtain the latest
solved geometry instead the geometry of SketchObject that may still be unsolved. This is relevant for drawing the geometry
No more solving in ViewProviderSketch. Solving a Sketch is now an exclusive competence of SketchObject.
There is however a lot of cleaning to do in ViewProviderSketch
(I mean, not that these commits are making a mess in VPSketch,
but that as a consequence of the changes, it should be possible to
optimize VPSketch, specially moving and drawing methods)
Very useful comment for future developers that may wonder why a solve per constraint just upon addition is necessary.
Added a new function to get the size of the geometry of the instance of the solver object (Sketch.cpp).
The previous way was to extract the geometry, which is costly and error prone, as you have to delete it afterwards.
Inserted comment about the necessity of triggering a Part2D update during edit mode
Fixes the issue where, when a sketch is cloned, and selected for
padding, the clone gets padded instead of the sketch.
It also allows padding of a sketch that is already used by anything
else, except for PartDesign features.
+ the same fix for PartDesign Revolution.
- Ellipse introduction button via (center,majaxis extreme, a point in edge), ellipse is always CCW so that Z axis goes in the positive direction of the sketch
- Backwards compatibility with files of previous versions of ellipse not defining a phi angle
- Art by Jim (all the icons you see and the XPMs shown on creation of an ellipse)
- Element Widget support for ellipses
- Box selection for ellipses
- Point on Ellipse constraint based on the gardener's method based on Ulrich's function proposal (radcan simplified, i.e. with simplify_radical sage function)
- Tangent: Ellipse to Line based on DeepSOIC's geometric formulation (radcan simplified)
Sketcher New Feature: Internal Alignment Constraint
- The element to which internal alignment is applied has to be selected last.
- All other elements are added in the order of priority, taking into account existing elements
- Art by Jim (beautiful icons).
Sketcher New Feature: Tool to show/hide/restore the internal geometry of an element
- New functionality for show/hide internal geometry:
toggles between hiding all unused internal geometry elements and showing all internal geometry.
The restore function is implicit to the showing all internal geometry
Sketcher New Feature: Arc of Ellipse support
- Part::Geometry + Python implementation
- ArcOfEllipse creation method
- Art by Jim (all the icons you see and the XPMs shown on creation of arc of ellipse elements)
- Sketcher Element widget for ArcOfEllipse.
Bug fix: Select elements associated to constraints works now for foci internal alignment constraints
-removes all soqtviewer references
-create a quarter adaptor class which implements missing functionality
-adopts freecad code to make use of SoRenderManager and changed View3DInventorViewer interface
inherit Base.FreeCADError form RuntimeError
inherit Part.OCCError from Base.FreeCADError
inherit OCCDomainError from Part.OCCError
inherit OCCRangeError from Part.OCCError
inherit OCCConstructionError from OCCDomainError
inherit OCCDimensionError from OCCDomainError
Added PY_CATCH_OCC macro
replace PyExc_Exception
use FreeCADError in makeWireString
catch exception in BSplineCurve.increasedegree
Move from float to double
Further suggestions for float -> double move
Moved Tools2D from float to double
More suggestions for float->double move from Gui subdirectory
Changes to FEM constraint visuals for float->double move
Suggested changes for float -> double move
Suggestions for Part module moving float -> double
created Partdesign_Hole, Tree_PartDesign_Pad, and
Tree_PartDesign_Revolution SVG icons
Referenced the above in the PartDesign.qrc file
Modified the ViewProviders to display the Tree_icons
for Chamfer, Fillet, Draft, Groove, Hole, LinearPattern,
Mirrored, MultiTransform, PolarTransform, Revolution,
Scaled, Pad and Pocket.
PartDesign_Hole has not been implemented yet however
the ViewProvider has been, so I added the icon
- remove StdDirection,StdAxis and StdMirrorPlane properties
- support sketch H_Axis, V_Axis, N_axis as valid references in patterns
- polish reference selection gui (unified for standard axes and custom references)
