wmayer
22b63a7653
+ fix ambiguous shortcuts
2015-02-18 13:07:42 +01:00
wmayer
78171d59fd
+ fixes #0001972 : FreeCAD crashes when using keyboard shortcut H to constrain a line
2015-02-18 12:50:16 +01:00
DeepSOIC
aeabffeed8
Sketcher: bugfix in updating constraints after external geometry delete
2015-02-17 12:27:32 +01:00
DeepSOIC
13406a4daf
Sketch:Validation: swap endpoints for reversed + constraint orientation locking controls
...
Added buttons to port sketches to CCW-emulation Sketcher.
Bonus =) : Added constraint orientation lock/unlock buttons (affects
point-wise modes of tangent and perpendicular constraints so far)
2015-02-17 12:27:32 +01:00
DeepSOIC
0767cd35f8
Sketcher: fix reversed geometry and rotated arcs
...
Fixes a bug where an arc, ellipse, or arc-of-ellipse, being reversed in
XY plane, behaved badly in sketcher (see forum thread "Sketch: how to
handle reversed external arcs?"
http://forum.freecadweb.org/viewtopic.php?f=10&t=9130 ).
Also fixes a problem with rotated arcs (see forum thread "Rotating Arc
in Sketcher"
http://forum.freecadweb.org/viewtopic.php?f=22&t=9145#p74262 ).
This is done by adding an emulation flag to a few methods in
Part::GeomXXX, which makes the shape to pretend being non-reversed
(CCW). This causes endpoints of reversed arcs of circles lineked as
external geometry to swap, causing broken sketches sometimes.
2015-02-17 12:27:31 +01:00
Abdullah Tahiri
0b081876e5
Ellipse: External geometry rotated fix
...
This commit solves the problem that a ellipse appears rotated when added as external geometry, if the face having the
elliptical shape has a direction vector in the -z axis.
This solves the problem. However, the issue with CW and CCW shapes in the sketcher shall be further investigated in order
to arrive to a general acceptable solution.
2015-02-17 12:27:31 +01:00
Eivind Kvedalen
c3af4232a4
Spreadsheet: getProperty does not return 0 when property is not found, but throws an exception. Handle this instead.
2015-02-17 11:47:56 +01:00
Eivind Kvedalen
4ab13b9fea
Spreadsheet: Remove empty set from documentObjectToCellMap.
2015-02-17 11:47:11 +01:00
Eivind Kvedalen
43e777c7e5
Spreadsheet: docDeps property was not properly maintained, resulting in spurious links to other objects.
2015-02-17 11:46:12 +01:00
Eivind Kvedalen
2621c22409
Spreadsheet: Don't return error message when custom attribute is not found.
2015-02-17 11:45:30 +01:00
Eivind Kvedalen
1b43ca109b
Spreadsheet: Consistently use App::Document::Label as reference for document names when tracking dependencies.
2015-02-17 11:44:55 +01:00
Eivind Kvedalen
1f94a15869
Fixed crash when setting/resetting bold/italic/underline on empty cells.
2015-02-17 11:44:21 +01:00
Yorik van Havre
423e700e8a
Arch: fixed support of 2D entities in IFC importer
2015-02-16 12:20:29 -02:00
Yorik van Havre
9b4b46f1d0
Arch: small fix in DAE importer
2015-02-15 23:41:46 -02:00
Yorik van Havre
0bb651da4d
Updated translation files
2015-02-14 12:16:39 -02:00
Yorik van Havre
7bbdb0a333
Spreadsheet: Added translation file
2015-02-14 12:15:01 -02:00
Yorik van Havre
0b0f6cf215
Spreadsheet: Added back old python spreadsheet code for archiving purposes
2015-02-14 12:03:22 -02:00
wmayer
be2bb52796
+ open transaction when duplicating selection
2015-02-13 23:12:51 +01:00
wmayer
74e169dc11
+ open transaction when pasting clipboard into document
2015-02-13 23:01:41 +01:00
wmayer
d89d1808b7
+ fixes #0001945 : selection out of sync with viewer
2015-02-13 22:26:04 +01:00
wmayer
f54da66bd3
+ remove unused variable
2015-02-13 22:13:38 +01:00
Eivind Kvedalen
d153fb2dbd
+ Fixed merge of cells to retain value in upper left cell+ Replaced std::map::at() with iterators and find. Removed some superfluous calls to std::map::find()
...
+ Visual Studio fixes
+ Fixed return values
+ Removed unused variables
2015-02-13 21:53:59 +01:00
Eivind Kvedalen
383ffa6e15
Initial implementation of Spreadsheet module (C++ version) by Eivind Kvedalen.
...
Various fixes for Windows by
Peter Lama <peterldev94@gmail.com>
Werner Mayer <wmayer@users.sourceforge.net>
2015-02-13 21:53:58 +01:00
Eivind Kvedalen
8ec6b3493d
Added Quantity::operator>(...).
2015-02-13 21:53:58 +01:00
Eivind Kvedalen
75dab66916
Added InterpreterSingleton::getValue(...) function.
2015-02-13 21:53:57 +01:00
Eivind Kvedalen
524e982b5e
Added tracking of external documents to dependency tracking code.
2015-02-13 21:53:57 +01:00
Eivind Kvedalen
e70b859395
Made Property::encodeAttribute static.
2015-02-13 21:53:56 +01:00
Yorik van Havre
5a9d79ac94
Draft: Fixed DXF imorter for non-GUI operation - fixes #1961
2015-02-13 16:49:29 -02:00
Yorik van Havre
40f0927705
Arch: Adapted IFC importer for new IfcOpenShell6
...
Squashed following commits:
* Arch: Adapted IFC importer for IfcOpenShell6
* Arch: further fixes for ifcopenshell6 compatibility
* Arch: IFC importer now converts to/from meters for better compatibility with IfcOpenShell
* Arch: further fixes with ifcopenshell6
* Arch: precision adjustments in IFC exporter
* Arch: small fix in makeRoof
2015-02-13 16:41:34 -02:00
Yorik van Havre
6202476061
Draft: made new DXF libraries dialogs translatable
2015-02-13 16:01:16 -02:00
wood-galaxy
c516b2456e
Draft : Show dialog if DXF libraries not found/not downloadable
2015-02-13 15:31:50 -02:00
wmayer
e551c4ef28
+ write out material information for x3d format
2015-02-13 17:26:49 +01:00
Sebastian Hoogen
192a32d8d1
refuse to change the placement of PartDesign::Feature Objects
...
in OpenSCAD/Explode Group command
2015-02-13 00:40:27 +01:00
Yorik van Havre
cd5783ac2e
Draft: fixed importSVG - fixes #1964
2015-02-12 11:57:39 -02:00
Sebastian Hoogen
cd771f65c6
meshing was removed from StlTransfer
...
with OCCT CR0025357 issue #1906
2015-02-12 13:46:14 +01:00
Yorik van Havre
4bb365f9b6
Draft: Small fix in DXF importer - fixes #1961
2015-02-12 13:46:14 +01:00
Yorik van Havre
f99b6cf534
Fixed typo
2015-02-12 13:46:13 +01:00
Yorik van Havre
f278c297fd
Drawing: reset the default template to the classic one
2015-02-12 13:46:13 +01:00
wmayer
750e44128d
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2015-02-11 09:50:41 +01:00
Sebastian Hoogen
12407a1057
disable conversion of BSplines to circles in SVG drawing output
...
partly revert 0a31bebaed
2015-02-10 15:45:34 +01:00
Yorik van Havre
b67405e16e
Fixed typo in text
2015-02-10 11:52:49 -02:00
Yorik van Havre
7b34d02c4c
Draft: re-added Draft-Drawing tool to DraftWB
2015-02-09 12:26:41 -02:00
Johannes Obermayr
4ef4369d09
Mod/Complete: Check for modules at runtime.This fixes runtime errors if e. g. TestGui isn't installed due to -DBUILD_TEST=OFF ...
2015-02-08 16:37:14 +01:00
Johannes Obermayr
b63c5d0e04
Mod/Complete: Check for modules at runtime.
...
This fixes runtime errors if e. g. TestGui isn't installed due to -DBUILD_TEST=OFF ...
2015-02-08 16:24:04 +01:00
Sebastian Hoogen
faac8c36ba
add encoding parameter to .as_std_string()
...
to handle PyUnicode Objects. Usually ASCII for object names and Utf-8
for file names and console output.
issue #995
2015-02-08 15:37:00 +01:00
Sebastian Hoogen
8ee81e0516
set the max. segments in BSpline approximation to 50
...
in Draft and Drawing WBs
2015-02-08 15:14:32 +01:00
Sebastian Hoogen
8ec87dbdf2
rename python classes for shapes and
...
implememnt __getstate__ and __setstate__ to enable pickling
issue #1948
2015-02-04 17:07:29 +01:00
wmayer
79173e37cd
+ correct usage of SoPolygonOffset
2015-02-02 14:18:16 +01:00
wmayer
65c56d0bd6
+support to write/read colors to/from OFF file
2015-02-02 09:59:02 +01:00
wmayer
c2d0857ddc
+ fix possible crash in DocumentItem
2015-02-01 12:09:37 +01:00
wmayer
f19fe1f8ed
+ improve loading SVG files in debug mode
2015-02-01 11:14:00 +01:00
wmayer
e788741631
+ fixes #0001938 : addObject() maximum recursion depth exceeded Error
2015-01-31 17:26:03 +01:00
Yorik van Havre
dc623f2646
Fixed a typo
2015-01-27 13:57:49 -02:00
Yorik van Havre
8628a6e0e0
Draft: small fix in SVG generation
2015-01-26 17:38:30 -02:00
Yorik van Havre
2ef086a028
Cosmetic fix in crowdin script
2015-01-26 16:26:28 -02:00
Yorik van Havre
d8146a0cf8
Updated ts files
2015-01-26 16:23:48 -02:00
Yorik van Havre
6ffc0e177a
Drawing: small fix in DraftView command
2015-01-26 16:00:13 -02:00
wmayer
97987db462
+ fix problems on unit tests, open transaction when creating distance object, layout warning, ...
2015-01-25 14:04:33 +01:00
wmayer
2cff92a73e
+ fixes #0001776 : Illegal character when opening project
2015-01-25 12:36:24 +01:00
wmayer
683e342cff
+ fix linker error with MSVC
2015-01-25 12:22:04 +01:00
Sebastian Hoogen
5a9484f06c
round the drawing view projection direction
...
before calculating the necessary view rotation to anticipate the
rounding that happens on saving and reloading the file. fixes #1909
2015-01-24 23:37:38 +01:00
Sebastian Hoogen
f32caef40c
respect locale environment except for LC_NUMERIC
...
fixes #1852
2015-01-24 19:52:25 +01:00
wmayer
be38772631
+ fixes #0001482
2015-01-24 16:32:21 +01:00
wmayer
ed46ec272f
+ slight fix in file filter
2015-01-24 16:31:49 +01:00
wmayer
39aa178b13
+ fixes #0001925 : Preferences not kept well
2015-01-23 19:41:31 +01:00
wmayer
c066183f4b
+ fix layout of document settings panel
2015-01-23 18:23:01 +01:00
Yorik van Havre
9b345d8264
Arch: Corrected some texts
2015-01-23 12:45:11 -02:00
Yorik van Havre
801906ce51
Added utility script to manage crowdin stuff
2015-01-23 00:00:47 -02:00
Yorik van Havre
06a689eff2
Draft: Added warning dialog against heavy DXF import operations - fixes #1685
2015-01-22 12:21:15 -02:00
Yorik van Havre
378deaf7a3
Fixed small naming error - fixes #1883
2015-01-20 21:23:34 -02:00
Sebastian Hoogen
d059520046
Use splines in dxf drawing output
2015-01-20 20:08:40 -02:00
Yorik van Havre
cb0fc8cd8e
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2015-01-20 20:04:54 -02:00
Yorik van Havre
645d176a13
Added preference setting to set default Author & License - fixes #1883
...
* added fields in Prefereces->Default->Document
* new documents take the values of those fields
2015-01-20 20:01:14 -02:00
wmayer
2c7d8a2358
+ fixes #0001928 : The export CAD dialog in PartGui always adds an extension to the filename
2015-01-20 21:38:38 +01:00
Sebastian Hoogen
c05f7762f8
import dxf splines as Draft BezCurve if applicable
...
fixes 1743
2015-01-20 20:07:25 +01:00
Sebastian Hoogen
17a85e4352
Set offset mode for extrusion draft
2015-01-20 11:30:13 +01:00
Sebastian Hoogen
9c698201e2
handle Draft Ellipse arcs
2015-01-20 11:28:17 +01:00
Sebastian Hoogen
2509e59b51
catch non-orthogonal transformation matrix
...
bugfix for f045df1ef3
2015-01-20 11:26:39 +01:00
wmayer
85214a4359
+ fix problem with values > 1000 in quantity spinbox
2015-01-19 21:59:51 +01:00
Yorik van Havre
a91fcc681c
Draft: Improvements to Trimex tool - fixes #1598
...
* Autotrim 2 intersecting draft lines, wires or arcs
* Don't snap if CTRL is not pressed
* Allow to trim/extend against itself
2015-01-19 13:49:33 -02:00
wmayer
ca0fb1480e
+ fix gcc build failure
2015-01-19 11:42:45 +01:00
wmayer
3c754da0cb
+ improve QuantitySpinBox
2015-01-19 00:36:07 +01:00
Yorik van Havre
3887080274
Wait before deleting __objs__ (Werner can you check if its Ok? Thanks)
2015-01-18 15:42:28 -02:00
Yorik van Havre
767d7b442a
Draft: fixed leftovers from last commit
2015-01-18 13:44:56 -02:00
Yorik van Havre
044c1c0ef1
Draft: More robust method to write DXF arcs
2015-01-18 13:42:17 -02:00
wmayer
86882eec6a
+ Handle PyCXX exception in Command::invoke
2015-01-17 16:36:19 +01:00
Yorik van Havre
8fbe631046
Draft: Fixed svg export view box - fixes #1810
2015-01-17 12:51:09 -02:00
wood-galaxy
1de729d6e9
+ fixes #0001923 : Fix typo for a string within the Arch wokbench
2015-01-17 11:41:22 +01:00
wmayer
1f44226882
+ copy DiffuseColor property when creating simple copy
2015-01-16 23:31:07 +01:00
wmayer
f5c363db9d
+ fixes #0001922 : occ exception during python shell.makeHalfSpace
2015-01-16 23:11:07 +01:00
Yorik van Havre
79458a83d0
Draft: minor fix in up/downgrade
2015-01-16 19:57:39 -02:00
Yorik van Havre
62b0498e6f
Draft: Added a recompute() at the end of Upgrade and Downgrade
2015-01-16 18:05:02 -02:00
Yorik van Havre
90540deb29
Arch: Removed Create from Scratch option from presets - fixes #1835
2015-01-16 17:34:24 -02:00
Yorik van Havre
f0ce2e6be6
Moved Draft-Drawing tool to the Drawing WB (renamed Draft View)
2015-01-16 17:16:39 -02:00
Sebastian Hoogen
0aabd2d5ec
importDXF: bugfix for handling weights in splines
2015-01-16 18:22:42 +01:00
Sebastian Hoogen
c90c2441d2
importDXF: provide polygon fallback for splines
...
with invalid multiplicities
2015-01-16 15:10:31 -02:00
Sebastian Hoogen
ad54783016
improve DXF spline import
2015-01-16 15:10:31 -02:00
Yorik van Havre
9de492592d
Draft: SVG linestyles are now settable in preferences - fixes #1773
2015-01-15 17:58:52 -02:00
Yorik van Havre
06e78d70c9
Draft: Upgrade tool now supports sketches with circles or ellipses - fixes #1881
2015-01-15 17:15:27 -02:00
wood-galaxy
f72c802f5d
Arch CutPlane : Fix some strings to be translatable
2015-01-15 10:27:49 -02:00
wood-galaxy
73c342e05c
Arch Roof : Improvement on gable case
2015-01-15 10:26:43 -02:00
wood-galaxy
16564430a1
Arch Roof : Add units in column header.
2015-01-15 10:26:43 -02:00
wmayer
ee4436b2c0
+ add toShape() to Part.Point, allow to pass Part.Point in Part.Vertex
2015-01-15 11:39:53 +01:00
wmayer
17099d0545
+ fixes #0001916 : Cannot cancel angle constraint dialogue in sketcher
2015-01-15 00:36:44 +01:00
wmayer
cbf0bb0aac
+ change copyright notice
2015-01-15 00:36:27 +01:00
Sebastian Hoogen
f045df1ef3
avoid using transformGeometry in importSVG
2015-01-14 11:56:45 -02:00
Yorik van Havre
ae3fafea6c
Updated base translation files for crowdin
2015-01-13 20:00:09 -02:00
Yorik van Havre
7a710279ad
Draft: Fixed continued dimension - fixes #1891
2015-01-13 19:07:05 -02:00
wmayer
fa4f8b0735
+ do not throw exception from inside signal handler to get useful stack trace for segmentation faults
2015-01-13 22:01:59 +01:00
wmayer
7c789a1bf7
+ allow to suppress verbose mode of XMLReader
2015-01-13 21:57:18 +01:00
wmayer
395d5249d4
+ minor change
2015-01-13 21:54:54 +01:00
wmayer
477099bbfe
+ remove useless stuff from Init files
2015-01-13 16:19:19 +01:00
Yorik van Havre
7d0dc068e4
Draft: Allow to draw lines by length & angle - fixes #1383
...
* Added a Length property to Draft line objects
* Added length & angle parameters to the line drawing tool
2015-01-13 12:10:52 -02:00
wmayer
5289967304
+ fixes #0001482 : v0.14 Mirrored objects parent the original object
2015-01-13 00:03:20 +01:00
wmayer
bdfaaee833
+ fixes #0001869 : Clones displayed in wrong view mode
2015-01-12 19:36:04 +01:00
wmayer
eb9b6acdd6
+ re-enable reading/writing grid size
2015-01-12 16:29:31 +01:00
wmayer
3f03e954da
+ fixes #0001914 : A4_Landscape_ISO7200
2015-01-12 11:27:30 +01:00
Richard Crozier
65092be5f3
Correct spelling of FEM Netgen Mesh 'Fineness' parameter
2015-01-12 11:12:30 +01:00
wmayer
c6fe925dfd
+ fixes #0001856 : Add standard set of blank ISO drawing template sizes
2015-01-12 01:56:14 +01:00
wmayer
c9a70c7f03
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2015-01-12 01:44:13 +01:00
wmayer
b437dfd9da
+ fixes #0001912 : Drawing Workbench Not Displaying Views of Cylindrical Parts.
2015-01-12 01:43:48 +01:00
Yorik van Havre
4cf15ae696
Draft: implemented new, more robust version of sortEdges - fixes #1911
2015-01-11 22:09:29 -02:00
wmayer
e16305cb83
+ fixes #0001791 : Counterbores do not follow when hole is moved
2015-01-12 00:55:56 +01:00
wmayer
351b9d7425
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2015-01-11 22:15:48 +01:00
wmayer
a672630756
+ fixes #0001905 : Group-ordering of orphaned children not working as expected
2015-01-11 22:15:18 +01:00
Yorik van Havre
af65c413d1
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2015-01-11 15:55:32 -02:00
Yorik van Havre
74856e5fbf
Draft: Dimensions ExtLines property can now be negative - fixes #1677
2015-01-11 15:55:19 -02:00
wmayer
0b904e674b
+ support Bezier curves for SVG output
2015-01-11 16:02:27 +01:00
wmayer
82edb4b50a
+ fixes #0001662 : IGES does not export correctly
2015-01-11 12:14:41 +01:00
wmayer
0a31bebaed
+ fixes #0001898 : Drawing workbench draws cylinder in orthographic projection wrong
2015-01-11 01:46:31 +01:00
wmayer
9cb8471fa2
+ fixes #0001856 : Add standard set of blank ISO drawing template sizes
2015-01-10 22:21:20 +01:00
wmayer
2e91cd1000
+ add new templates from triplus
2015-01-10 22:19:46 +01:00
wmayer
3210d0d2a0
+ issue #0001856 : Add standard set of blank ISO drawing template sizes
2015-01-10 19:09:58 +01:00
wmayer
f1e9966084
+ fixes #0001054 : Show name of feature when it reports a warning
2015-01-10 16:37:49 +01:00
wmayer
0954adf784
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2015-01-10 15:15:42 +01:00
wmayer
6a3437e28e
+ fixes #0000692 : Sketcher: Add angle constraint for arcs
2015-01-10 15:15:18 +01:00
Sebastian Hoogen
ff8ad03aa3
bugfix in dxf output of arc
...
regression created by 099ece5c00
2015-01-10 12:09:00 -02:00
Sebastian Hoogen
9ce08e7596
make the Qt::ISODate workaround obvious
...
by including the intended implmentation
2015-01-10 12:09:00 -02:00
Sebastian Hoogen
fe4ab358e5
issue #1450
2015-01-10 12:09:00 -02:00
wmayer
2bff32d704
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2015-01-10 12:17:57 +01:00
Yorik van Havre
183a0f066b
Draft: Fixed typo - fixes #1907
2015-01-09 20:46:07 -02:00
Yorik van Havre
02eecc4fd7
Draft: small bug in Draft GUI - fixes #1908
2015-01-09 20:43:33 -02:00
wmayer
396e9c93b7
+ fixes #0001553 : printing drawing full size (1:1) prints wrong size
2015-01-09 21:15:27 +01:00
wmayer
ddfb525c87
+ fixes #0000932 : Unexpected scaling of a printed Drawing From FreeCAD but not always from exported SVG
2015-01-09 14:00:18 +01:00
wmayer
c5b2609974
+ select number of quantity spinbox when value is set in property editor
2015-01-07 22:05:00 +01:00
wmayer
311ba87b6c
+ issue #0000932 : Unexpected scaling of a printed Drawing From FreeCAD but not always from exported SVG
2015-01-07 19:35:52 +01:00
wmayer
f24e216db4
+ fixes #0001652 : Proper support of units for all geometric primitives
2015-01-07 15:31:07 +01:00
wmayer
be2e191681
+ fixes #0001669 : Part operation with parts in groups splits again when moved back into group
2015-01-07 11:02:52 +01:00
wmayer
80db2a3bd9
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2015-01-06 18:39:00 +01:00
wmayer
010fc6f307
+ fixes #0001721 : PartDesign Pad 'Up to face' face selection in the 3D view not working
2015-01-06 18:38:33 +01:00
wood galaxy
641c295d44
Arch : Added mid-point to Frame Basepoint - fixes #1892
2015-01-06 13:44:44 -02:00
wmayer
fb19ea5089
+ fixes #0001870 : Revolution and Groove in Part-Design do not hide the sketch and parent-feature for some geometries
2015-01-06 15:00:24 +01:00
wmayer
053f76086b
+ fix one more missing va_end
2015-01-06 12:06:12 +01:00
Julien Nabet
b325bcea3d
Fix some cppcheck reports:
...
- (error) va_list '<var>' was opened but not closed by va_end()
- (style) Same expression on both sides of '||'
- (style) Same expression on both sides of '!='
2015-01-06 11:37:44 +01:00
wmayer
67ca966c98
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2015-01-05 23:04:48 +01:00
Michael Georg Hansen
be919bb6b3
Use the FreeCAD's working directory as initial directory for FileChooser.
2015-01-05 23:01:52 +01:00
Yorik van Havre
bde130821d
Draft: Finished ellipse support - fixes #1788
2015-01-05 19:23:02 -02:00
wmayer
296c07142a
+ fixes #0001896 : Selection View widget don't display latin characters for label.
2015-01-05 21:46:51 +01:00
wmayer
489f2451fa
+ fix a couple of issues in selection view
2015-01-05 19:48:43 +01:00
wmayer
55d124255e
+ fixes #0001851 : Qt Assistant loads Error 404
2015-01-05 18:02:15 +01:00
wmayer
71efef4761
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2015-01-05 16:29:06 +01:00
wmayer
ee86871bed
+ fixes #0000763 : Bad IGS import
2015-01-05 16:28:40 +01:00
wood galaxy
03183527b2
Draft : fix some utf8 decode
...
Impacted Lines : 688,2061,2972
2015-01-05 13:13:45 -02:00
wood galaxy
2db39c3d71
Arch : Fix some utf8 decode
2015-01-05 13:13:45 -02:00
wood galaxy
95c0fe3a84
Arch : Internal object name are in English.
...
Arch objets Label could be translated.
2015-01-05 13:13:45 -02:00
wood galaxy
5657eed566
Arch: Fixed building label
2015-01-05 13:13:45 -02:00
wmayer
ab24e9df6a
+ Implement repr() method of Python binding for ParameterGrp
2015-01-05 13:45:46 +01:00
Sebastian Hoogen
be447e64b5
revise drawing dxf ellipse export
2015-01-05 12:26:51 +01:00
Sebastian Hoogen
099ece5c00
determine the angles of an arc only by the axis and paramter range
2015-01-05 12:26:50 +01:00
wmayer
5ecf5b2ef6
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2015-01-05 11:21:06 +01:00
Stefan Tröger
7895134432
+ Assign the correct context id to the new render action so that correct VBOs are used
2015-01-05 11:20:28 +01:00
Yorik van Havre
9ee08a97ea
Draft: fixed #1664 again
2015-01-04 20:38:47 -02:00
wmayer
b2e32abe7e
+ fixes #0001705 : Download manager does not follow redirect (HTTP status 302)
2015-01-04 23:15:58 +01:00
Yorik van Havre
9141d28826
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2015-01-04 15:34:12 -02:00
Yorik van Havre
47f172bfa2
Arch: Fixed window label
2015-01-04 15:33:54 -02:00
wmayer
25b78f9026
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2015-01-04 18:15:59 +01:00
wmayer
c3102b69bc
+ issue #0001705 : Download manager does not follow redirect (HTTP status 302)
2015-01-04 18:15:20 +01:00
Yorik van Havre
a7b3b85aa1
Arch: Fixed the task panel of Windows - fixes #1835
2015-01-04 15:00:31 -02:00
wmayer
0d1fc35b20
+ add try/catch block to notify() method
2015-01-04 13:26:34 +01:00
wmayer
d3bc389765
+ exception handling if moving sketch fails
2015-01-04 13:02:11 +01:00
wmayer
4cfc2a1a08
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2015-01-03 22:39:45 +01:00
wmayer
6c187572c7
+ fix undo/redo issues with ortho views
2015-01-03 22:39:07 +01:00
Yorik van Havre
9b9526e4cc
Arch: fixed behaviour of clones of windows - fixes #1841
2015-01-03 15:40:02 -02:00
Yorik van Havre
3db987d9b7
Draft: Added a Fuse property to Array objects - fixes #1768
2015-01-03 14:47:29 -02:00
wmayer
d8e0df9e97
+ fixes #0001678 : Visibility property is ignored on drawing sheets
2015-01-03 17:09:17 +01:00
wmayer
e7963472b0
+ close drawing view when deleting page object
2015-01-03 14:23:17 +01:00
wmayer
3614a08911
+ fixes #0001698 : All drawing pages are opened automatically when opening a project file
2015-01-03 13:45:12 +01:00
wmayer
c47eea61fa
+ return point/facet indices as unsigned long in Python
2015-01-03 11:24:57 +01:00
Yorik van Havre
77882051fa
Draft: Made initial Face mode dependent on fill mode pref setting - fixes #1812
2015-01-02 19:53:39 -02:00
wmayer
08828e5dc0
+ fixes #0001225 : Allow User to Rotate Arc Radius Constraint Text and Leader
2015-01-02 21:26:03 +01:00
Yorik van Havre
fe994efa66
Draft: Fixed import of DXF splines - fixes #1743
2015-01-02 17:05:27 -02:00
Yorik van Havre
12afbc9ed5
Arch: trivial bugfix
2015-01-02 16:49:31 -02:00
Yorik van Havre
1dd069ec7f
Raytracing: added transparency to lux feature - fixes #1771
2015-01-02 16:48:35 -02:00
wmayer
393d64d53c
+ fixes #0000498 : 'Measure Distance' tool sometimes renders distances inside of solid objects
2015-01-02 14:57:14 +01:00
wmayer
26666a1fda
+ minor optimization
2015-01-02 12:26:29 +01:00
DeepSOIC
c4fb8fc8ae
Sketcher: AngleViaPoint: revert from OCC angle precalculation
...
Returning back to the slow temporary-sketch-based
calculateAngleViaPoint, because OCC-based version was incompatible with
always-CCW sketcher geometry. More info in "Sketch: how to handle
reversed external arcs?" forum thread
http://forum.freecadweb.org/viewtopic.php?f=10&t=9130&sid=1b994fa1236db5ac2371eeb9a53de23f
2015-01-02 11:48:34 +01:00
DeepSOIC
93d00b2dab
Sketcher: validateConstraint update
...
Refactor validateConstraint and add angle-via-point and snell's law
support there.
2015-01-02 11:48:33 +01:00
DeepSOIC
684036fae8
Sketcher Ellipse: code cleanup
...
deleting redundant overloaded functions involving arc-of-ellipse, a few
todo comments, not implemented methods, System(constraintlist)
constructor.
2015-01-02 11:48:33 +01:00
DeepSOIC
ab7d980de0
Sketcher: solver rebranding - renamed directory
...
Sketcher: solver rebranding - updated references
cleanup
Sketcher: GCS: remove unused NAN and INF
2015-01-02 11:48:32 +01:00
DeepSOIC
9cc2ff7944
Sketcher Constraints: small code refactor
...
Unifying first checks in grad().
2015-01-02 11:48:32 +01:00
DeepSOIC
8660d9a914
Sketcher Ellipse: porting to DeriVector2
...
Sketcher Ellipse: porting tangent-line to DeriVector2
Replacing a ton of unreadable, sage generated math code with
easy-to-manage C++ code.
Sketcher Ellipse: porting internal align-t to DeriVector2
Sketcher Ellipse: small math refactor; const members
Moving the repeating code computing deriv+value of major radius to a
method of GCS::Ellipse.
Marking several methods of DeriVector2 as const member functions.
Sketcher Ellipse: porting arc angle rules to DeriVector2
Just porting.
Probably a complete remake of the concept is worth... Angles can be
calculated explicitly, there's no need to load the solver. I see no
benefits whatsoever on using the solver to keep track of angle values.
Sketcher Ellipse: porting equality to DeriVector2
2015-01-02 11:48:31 +01:00
DeepSOIC
43e8b30846
OpticConstraints: Adding Snell's law
...
Fix AngleViaPoint to support new derivative calculation technique.
OpticConstraints: Adding Snell's law. Fix AngleViaPoint to support new derivative calculation technique.
Snell's law constraint added to GCS, but not yet exposed and cannot be
tested.
Since the way CalculateNormal() returns derivatives had changed,
AngleViaPoint constraint needed modifications. Nothing serious.
OpticConstraints: SnellsLaw progress
Addable through python. Fix math. Some quick-and-dirty visual stuff to
get rid of hangs and to see the constraint in action.
OpticConstraints: SnellsLaw: flipping logic fix
OpticConstraints: SnellsLaw progress
Added toolbar button. Allowed editing a datum by doubleclick. New error
message approach during constraint creation.
OpticConstraints: SnellsLaw
OpticConstraints: SnellsLaw: list label improvement
OpticConstraints: SnellsLaw: fix after rebase
OpticConstraints: SnellsLaw: expose helper constraints
Snell's law internally is made of three constraints: point-on-object,
coincident and the Snell's sin/sin. They were all buried under one UI
constraint. Exposing them allows to construct reflection and
birefringence on the point (attempting to do so used to result in
redundant constraints and was often not functional at all).
This commit breaks compatibility with older files.
OpticConstraints: SnellsLaw: small refactor of math
Placing the duplicated code of error and gradient calculation into a
private method.
OpticConstraints: SnellsLaw: fix datum edit unit
OpticConstraints: SnellsLaw: fix datum edit bug
After previous fix, the dimensionless value was not accepted (the
constraint's value did not change, the changes were ignored).
2015-01-02 11:48:31 +01:00
DeepSOIC
68ec9e44f8
OpticConstraints: SnellsLaw: icon
2015-01-02 11:48:30 +01:00
DeepSOIC
397e37ad1c
GCS: fundamental changes to simplify derivatives
...
GCS::Vector2D was morphed into a DeriVector2, a derivative-aware vector.
A bunch of vector math methods were added that implicitly calculate
respective derivatives. Now, there is no need to calculate the partials
- most is done implicitly.
2015-01-02 11:48:30 +01:00
DeepSOIC
3838bddcdb
AngleViaPoint Constraint
...
AngleViaPoint: fixes in UI routines + new messages
Goofed undo message in tangency via point is fixed.
Forgotten updateActive, clearSelection have been added.
New more informative error messages for tangent constraint.
AngleViaPoint: using it instead of via line tangency
* replaced the helper construction line for ellipse-to-ellipse and
similar tangency with a point. Using tangent-via-point there
* deleted tangency via line for point-to-point on
(cherry picked from commit 9e3fa8c8de0f49c0ef3c978e015eb905358dbdd9)
AngleViaPoint: internal/external tangency locking
*Added automatic tangency type lockdown for all new constraints (only
for point-wise tangency).
Tangency type is stored in the constraint datum field, as an angle value
shifted by Pi/2 (to be able to treat 0.0 as undefined type).
Added ability to switch the tangency by setting datum value from python
(can be abused by passing arbitrary angle).
Further simplified the tangency related code in Sketch.cpp.
AngleViaPoint: added license to Geo.cpp
AngleViaPoint: renames in Constraints.cpp/.h
Changed some names to increase self-explanatoryness:
bool "remapped" renamed to "pvecChangedFlag"
"ReconstructEverything()" renamed to "ReconstructGeomPointers()"
AngleViaPoint: renames in Constraints.cpp/.h
Changed some names to increase self-explanatoryness:
bool "remapped" renamed to "pvecChangedFlag"
"ReconstructEverything()" renamed to "ReconstructGeomPointers()"
AngleViaPoint: using for endpoint perpendicularity
+ direction lockdown, just as with tangency.
+ quite a lot of old code is gone because of that
AngleViaPoint: perp-ty UI routine made similar to tangent
(Git has made a very messy diff.)
The changes are:
* Perpendicularity-via-point (3-element selection) support added.
* Endpoint-to-curve and endpoint-to-endpoint supports all shape
combinations.
* a bit of code cleanup and clarifications.
AngleViaPoint: placement of perpendicular icon in 3d view
AngleViaPoint: fix: allow setDatum of perpendicular constraint
AngleViaPoint: fix: centers of ellipses are not endpoints
isSimpleVertex used to return false for centers of ellipses and arcs of
ellipses, which made them being accepted for point-to-point tangency.
Should be fixed forever, mo more changes are expected to be necessary
for new types of geometry.
AngleViaPoint: precalc with OCC (work in progress)
Work in progress (not yet working).
Using OCC's tangent to replace implementation of
SketchObject::calculateAngleViaPoint.
AngleViaPoint: fix math: normal now points inwards, where it was intended initially and goofed up.
AngleViaPoint: adding comments to the code
AngleViaPoint: using GeomCurve::closestParameterToBasicCurve for angle precalculation
AngleViaPoint: Py method: changeConstraintsLocking
changeConstraintsLocking(True) - locks/re-locks all lockable
tangency/perpendicularity constraints of the sketch (applicable to
existing sketches).
changeConstraintsLocking(False) - removes locking information from
lockable constraints
AngleViaPoint: final SketchObject::calculateAngleViaPoint
Now, finally, using OCC functionality (thanks Abdullah!), without
composing temporary Sketch object.
2015-01-02 11:48:29 +01:00
DeepSOIC
9f821e06b5
Sketcher: Responsivity tweaks and AngleViaPoint Constraint
...
Solver iteration limit independent of system size (reduces hangs when
solver fails to converge).
Repaint() instead of update() to force render for every movePoint.
Sketcher: New Constraint AngleViaPoint
* Adding generic CalculateNormal() method
* Reconfiguration of GCS geometry classes: adding a base class "Curve",
that has a pure virtual function CalculateNormal().
* Initial inplementation of the new function.
* adding Vector2D class (I wanted to reuse the existing, but got wierd
compile errors, so implemented a new one... TODO.)
* Adding redirection support into GCS shapes. Adding a Copy method to
GCS::Curve.
* Automatic point-on-object
* Angle precalculation: when AngleViaPoint is added, angle is properly calculated based on
existing geometry.
* Added tangency-via-point using one.
* Implemented placement of tangency-via-point icon in 3d view. Also
affected is the placement of point-on-object icon (since it is very
similar code, it is now shared with tangency-via-point)
* Placement and moving of angle datum
Functions: calculateAngleViaPoint, isPointOnCurve,
calculateConstraintError exposed to python
* Endpoint tangency: All endpoint-to-endpoint and endpoint-to-curve tangency now works
through AngleViaPoint constraint and obsolete code clean up (most procedures
addConstraintTangentXXX2YYY)
2015-01-02 11:48:28 +01:00
Abdullah Tahiri
ec03fb541f
Part: Extension of Geometry::Curve
...
Part: Extension of Geometry::Curve to wrap more functions of OCC
Apart from:
bool tangent(double u, gp_Dir&) const;
that was already implemented, now it also implements:
Base::Vector3d pointAtParameter(double u) const;
Base::Vector3d firstDerivativeAtParameter(double u) const;
Base::Vector3d secondDerivativeAtParameter(double u) const;
bool normal(double u, gp_Dir& dir) const;
bool closestParameter(Base::Vector3d point, double &u);
i.e. apart from giving the tangent vector for a given curve at parameter value u,
it also gives:
- The point cartesian coordinates of the curve point at parameter value u
- The vector of the first derivative at parameter value u
- The vector of the second derivative at parameter value u
- The normal vector to the curve at parameter value u
- The parameter value of a curve closest ot a given point
Code cleanup: Changing Trim functionality of Ellipse to use OCC calculations
Part Curve functions extension: closestParameterToBasicCurve
It provides the parameter of the curve closest to a given point. If the curve is a Trimmed curve, the parameter of the basic underlaying curve closest to the point is provided.
2015-01-02 11:48:28 +01:00
Sebastian Hoogen
a8dd528c1a
Build python Qt resource files at compile time
...
fixes #1888
2015-01-02 11:14:07 +01:00
Yorik van Havre
f3af41e4cc
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2015-01-01 19:06:26 -02:00
Yorik van Havre
051b38b1c1
Arch: temporarily disabled custom subvolume in windows
2015-01-01 19:06:11 -02:00
Yorik van Havre
60b648b053
Arch: Equipments now take the diffuse color of their base object on creation
2015-01-01 19:06:00 -02:00
wmayer
f545455466
+ fixes #0001889 : Crash when undoing move of base object of a part fillet
2015-01-01 21:05:19 +01:00
Yorik van Havre
2680395ede
Draft: adapt icon sizes from preferences settings - fixes #1783
2014-12-31 21:23:24 -02:00
Yorik van Havre
845849fa91
Arch: implemented reading & writing of Ifc properties in IFC files
2014-12-31 18:35:39 -02:00
Yorik van Havre
244373779d
Arch: Fixed IFC import bug - fixes #1887
2014-12-31 15:21:41 -02:00
Yorik van Havre
3f607d73a4
Arch: Fixed Arch example - fixes #1789
2014-12-31 14:42:22 -02:00
Yorik van Havre
cb5a807990
Arch: Added a MoveWithHost property to all Arch objects which specifies if they must be moved/rotated together with their parent - fixes #1820
2014-12-31 14:04:23 -02:00
Yorik van Havre
1f9ecfa509
Draft: Better error messages when trying to convert a bspline to a sketch
2014-12-31 13:17:25 -02:00
wmayer
ca5062cbfe
+ fixes #0001885 : Unhandled exception when trying to enter edit-mode for objects while drawing view is active
2014-12-31 14:08:03 +01:00
wmayer
4d618955b3
+ fixes #0001884 : Crash when double-clicking on Clip element with drawing page closed
2014-12-31 13:15:33 +01:00
wmayer
b2f8a4ed2a
+ fixes #0001723 : Display errormessage in tree in tooltip
2014-12-30 22:44:29 +01:00
wmayer
2c53bd1e9a
+ fixes #0001670 : Orthographic projection: scale/position is empty when unchecking 'Auto scale/position'
2014-12-30 19:14:07 +01:00
wmayer
c231866b8d
+ fixes #0001746 : Part Fillet and Chamfer do not show correct length/radius when editing old items
2014-12-30 17:20:32 +01:00
wmayer
ff09f0524d
+ fixes #0001656 : Vertical/horizontal distance constraint confuses for a line or two points
2014-12-30 15:20:29 +01:00
wmayer
fba0ef0671
+ fixes #0001657 : Sketcher: First digit can not be deleted when editing grid size
2014-12-30 14:18:02 +01:00
wmayer
7aa91ecee3
+ fixes #0001760 : FC fails to load a *.FCStd file if the filename lacks the *.FCStd file extension
2014-12-30 00:31:39 +01:00
wmayer
72f947433c
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-12-29 22:28:52 +01:00
wmayer
f51daa88e0
+ fixes #0001819 : Getter Methods for Data inside a sketch
2014-12-29 22:28:12 +01:00
Yorik van Havre
2f78c021db
Arch: Fixed encodings in Survey - fixes #1825
2014-12-29 18:54:33 -02:00
Yorik van Havre
638fa8ba75
Draft: Changed working plane button text to Auto - fixes #1879
2014-12-29 17:54:04 -02:00
wmayer
84aad261fc
+ fixes #0001876 : replace helpful text in task tab with an info button
2014-12-29 18:49:17 +01:00
wmayer
d83c02387c
+ fix constraint evaluation function
2014-12-29 15:17:04 +01:00
Peter Lama
32dd867a30
Fix duplicate 'optimized' when using new libpack
...
When using a CLbundler libpack, PYTHON_LIBRARY has both optimized and debug
libs, but it doesn't when using an old libpack, which was the reason for
commit f5a4e680
2014-12-28 19:04:31 -08:00
wmayer
6a1cb47e30
+ fixes #0001616 : crash when selecting 'Edit Sketch'
2014-12-29 01:13:03 +01:00
wmayer
51c017ae24
+ fixes #0001877 : associate a grayed out icon with Freecad's backup files (fcstd1)
2014-12-28 23:54:08 +01:00
wmayer
e329cb5c3a
+ fixes #0001878 : model refine exception
2014-12-28 18:10:02 +01:00
wmayer
7d8b1f30c3
+ fixes #0001720 : Freecad crash when handling invalid sketches
2014-12-28 17:10:54 +01:00
wmayer
6a211b9dbe
+ fixes #0001060 : Editing sketch crashes FreeCAD
2014-12-27 22:47:21 +01:00
wmayer
16a8965038
+ do not long apply changes in mesh settings on existing mesh objects
2014-12-27 18:32:18 +01:00
wmayer
7149cce90f
+ fixes #0000957 : Sketch view problem when go to edit
2014-12-27 17:50:37 +01:00
wmayer
b172e069a1
+ fix conversion from Qi image to Inventor when image uses a color table
2014-12-27 13:51:36 +01:00
wmayer
6a9252744d
+ fixes #0000976 : Usability: default Material drop-down is not the active material type
2014-12-27 00:56:46 +01:00
wmayer
93e5668967
+ make undo/redo accessible from drawing view
2014-12-26 22:46:02 +01:00
wmayer
9290274e1c
+ fixes #0000711 : fileted borders not projected on 2D drawing + deleted views still showing
2014-12-26 22:24:45 +01:00
wmayer
d060cdf400
+ revert changes for issue 1873
2014-12-26 00:08:26 +01:00
wmayer
272cb566e9
+ fix minor issue in toggle construction command
2014-12-25 23:13:01 +01:00
wmayer
29d50dbc01
+ improve whitespace
2014-12-25 23:10:42 +01:00
wmayer
e8802adcbe
+ fixes #0001838 : When In Sketcher Make It Difficult To Mistakenly Delete A Feature
2014-12-25 22:43:09 +01:00
wmayer
a6b8bd6815
+ improve whitespace, fix warnings
2014-12-25 09:48:23 +01:00
wmayer
33bc596fd8
+ fixes #0001873 : Error working with getSelectionEx()[0].SubObjects
2014-12-23 22:04:34 +01:00
Yorik van Havre
11a4025c4b
Arch: Fixed Ifc explorer to work with recent ifcopenshell
2014-12-23 17:34:56 -02:00
Sebastian Hoogen
d0126061c8
DRAWEXE export: minor bugfix
2014-12-23 15:58:17 +01:00
Sebastian Hoogen
ca3ad00da8
SVG export: minor improvements and bugfixes
...
export Names as "id" attributes and Lables to "title" elements.
avoid duplicate path names in SVG export
handle faces with holes in SVG export
sort the edges in given wires using fixWire()
2014-12-23 15:57:57 +01:00
wmayer
2db457b74a
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-12-23 15:32:37 +01:00
wmayer
3fa8a1ed2b
+ fixes #0001874 : Scripted constraints not evaluated correctly
2014-12-23 15:32:03 +01:00
Yorik van Havre
da5504eebb
Draft: Fixed autoconversion of bsplines to circles in DXF export
2014-12-23 12:13:25 -02:00
wmayer
c918ef7e40
+ fix whitespaces in Python module
2014-12-22 12:54:09 +01:00
wmayer
491ea2b52a
+ use QApplication instead of qApp
2014-12-22 12:30:44 +01:00
wmayer
a5bbabdc3e
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-12-22 03:07:53 +01:00
wmayer
5aefd2d346
+ fixes #0001859 : Unable to select PNG files for icons for macros in Tools-Customize
2014-12-22 03:07:26 +01:00
wmayer
366e974b7f
+ fixes #0001864 : Support Command-D and Command-. on Mac OSX
2014-12-21 14:56:56 +01:00
wmayer
02cc02eaee
+ fix build failure
2014-12-21 11:21:32 +01:00
Abdullah Tahiri
75377ebfd3
Part Module New Feature: Hyperbola & ArcOfHyperbola
...
- Completed Hyperbola c++ implementation and python wrapper
- Created ArOfHyperbola c++ and python wrapper implementation
2014-12-21 00:54:07 +01:00
Abdullah Tahiri
6997cc9991
Part Module New Feature: Parabola & ArcOfParabola
...
- Completed Parabola c++ implementation and python wrapper implementation
- Created ArOfParabola c++ and python wrapper implementation
2014-12-21 00:51:24 +01:00
Michael Georg Hansen
8effb87566
Prevent pages and views from being put into the drawing sheet.
2014-12-20 22:18:43 +01:00
Michael Georg Hansen
ec4ed868b6
Remove leftover debug output and use named parameters.
2014-12-20 22:18:22 +01:00
Michael Georg Hansen
fe1d67fd65
Simplify access to projection properties.
...
Directly access the properties where possible.
2014-12-20 22:17:46 +01:00
Michael Georg Hansen
1816f88575
Reuse projection settings from an existing view when creating new draft views.
...
Select a draft object and a view on a drawing page, then the view created for
the draft object will have the same projection settings as the selected view.
2014-12-20 22:17:08 +01:00
Michael Georg Hansen
ef24aaa3ce
Reuse projection settings from an existing view when creating new part views.
...
Select a part and a view on a drawing page, then the view created for the part
will have the same projection settings as the selected view.
2014-12-20 22:16:41 +01:00
wmayer
6af1186d27
+ remove Makefile.am, remove some leftovers, avoid including unneeded headers in GCS.cpp
2014-12-20 14:06:54 +01:00
wmayer
d486f3351d
+ fix pow() ambiguity
2014-12-20 14:01:23 +01:00
Abdullah Tahiri
501c40f0e6
Sketcher: Ellipse implementation enhancements
...
- ArcOfEllipse enhancement: Tangency ArcOfEllipse to ArcOfEllipse or ArcOfCircle by selecting end/starting points...
- Minor bug corrections (Thanks DeepSOIC)
- ExposeInternalGeometry python command
- DeleteUnusedInternalGeometry python command
- On deletion of an Ellipse/ArcOfEllipse all further unconstrained internal geometry is also deleted.
- This cleans up the code by eliminating code repetition in the creation methods.
- Major bug fix for autoconstraints for ellipse and arc of ellipse creation (for both creation methods)
- Major bug fix Start and Endpoint constraints of an arc of ellipse where not taking into account that Sketcher arcs are always CCW, so they have to be exchanged if we convert a CW arc into a CCW arc.
Sketcher: General bug fix: Tangency wrongly suggested
What?
=====
- On creation of a shape autoconstraints are suggested.
- Tangent autoconstraint was suggested even with lines perpendicular to the tangency direction
Reproduce
=========
- Make a circle on the origin and move the mouse along the X axis, it will suggest a tangency that is impossible
- Click on the axis and no circle will be created
Solution
========
- The SeekConstraint now can use the parameter dir to give a direction that is substantially perpendicular to the expected tangency, so that
if an object having a direction (a line) is hit, a tangency will not be suggested if within around 6 degrees of being parallel.
- Additionally, if such a line is an X,Y axis of the sketch, tangency will only be suggested if the direction is within 6 degrees of being perpendicular (i.e. it is almost tangent already while sketching).
- This difference is due to the fact that an X or Y axis can not "move" to meet the object under creation, whereas a line can.
2014-12-20 12:33:37 +01:00
Mark A. Taff
80120a6bac
Ellipse implementation: Several bug fixes
...
I. Fix minor bug where wrong b was used to create ellipse internal geometry.
Tweak the internal geometry code a bit and reformat it so it isn't so wide.
Also begin debugging constraint conflicts on small circular ellipses.
There seem to be two issues currently in major/minor internal geometry lines:
1) Sometimes minorLength > majorLength due to round-tripping doubles, and
2) Constraint conflicts when majorLength > minorLength by an epsilon on the order of 1e-6
(cherry picked from commit 5c3e20af1a95c860112289dcdda54ea99778bc3a)
II. When testing for a valid ellipse, also ensure that the mangled major axis length > the mangled axis length.
This additional condition ensures that major and minor axis constraints don't conflict in the case of small
(nearly) circular ellipses.
The is still a potential bug in the solver when the major length is just slightly larger than the minor, but this fix
makes it nigh impossible to reproduce.
(cherry picked from commit 7e274bc32d9aa1a12ab52bfa33ed80353540b062)
III. Code clean up
Remove redundant 3d vectors.
(cherry picked from commit c656d5165c8bae8f101a2b46af6b12348d06cefe)
2014-12-20 12:33:37 +01:00
Abdullah Tahiri
c8d7f70dba
Sketcher: Ellipse implementation: Art by Jim
2014-12-20 12:33:36 +01:00
DeepSOIC
fc7f1791d2
Fix intern. geom. placement for ellipse arc a<b
...
(cherry picked from commit 896372cbae2d5667f72f6ee9e628eea482846156)
2014-12-20 12:33:36 +01:00
Abdullah Tahiri
83edcf4c86
Sketcher: Ellipse : Integration of all conics under a single toolbar space
2014-12-20 12:33:35 +01:00
Abdullah Tahiri
ba2c2d36e0
Sketcher: Ellipse implementation Art by Jim
...
- Art for setting all conics under a single icon
- Art for ellipse for 3 points creation method
2014-12-20 12:33:35 +01:00
Mark A. Taff
bccb9466cc
Implement two construction methods for ellipses:
...
--Center, major radius, minor radius
--Periapsis, apoapsis, minor radius
Artist: We need an icon for periapsis, apoapsis, minor radius method.
(cherry picked from commit f0a4339621b0bf901754af14c3cd36c95ca55966)
2014-12-20 12:33:35 +01:00
Abdullah Tahiri
901bbbed57
Sketcher: Various Ellipse enhancements
...
- Autoconstraints for Ellipse
- Conversion of a Part.Arc of an Ellipse to Sketcher.
2014-12-20 12:33:34 +01:00
Sebastian Hoogen
dc5c64703a
support for ellipses and elliptical arcs in flattened SVG output
...
(cherry picked from commit 59eabdbcb043f3d462c3e9ed0ba21cfe65b7aae6)
2014-12-20 12:33:34 +01:00
Abdullah Tahiri
f5df65c4c4
Sketcher: Ellipse enhancement: All internal geometry is shown on creation
...
Elements that have internal geometry are created with the internal geometry on creation.
It has been under discussion for a long time. Ulrich was in favour (asked for it several times).
DeepSOIC implemented the focus because he hated the poor dragging of the ellipse when empty.
2014-12-20 12:33:33 +01:00
DeepSOIC
9d135bdc4e
Sketcher: Ellipse enhancement: Negative focus on creation to improve dragging
...
Focus2 is thrown in automatically for ellipse arcs
(cherry picked from commit 1ab814e6b07fd946dbb2910cc1bfb8588c61afb8)
2014-12-20 12:33:33 +01:00
Abdullah Tahiri
d0362fa4a2
Sketcher Ellipse and ArcOfEllipse: Extra features and bug fixes
...
- Visual representation of equality constraint: Separate circle and arcofcircle implementation from ellipse and arcofellipse implementation
- Fix for Alignment constraint: Now it allows to assign a second element, one by one
- Box selection for ArcOfEllipses
Fixes the bug that vertex far away got selected due to lack of sync between the selection and draw loops.
2014-12-20 12:33:32 +01:00
DeepSOIC
f24b589d67
Sketcher Ellipse bug fix:
...
- Fix placement of equality symbols at ellipses and arcs of ellipses
2014-12-20 12:33:32 +01:00
Abdullah Tahiri
a067a7c25a
Sketcher Ellipse and ArcOfEllipse: Extra features and bug fixes
...
- Minor changes to alignment constraint selection to avoid to create objects just for simple calculations
- Equality constraint of Ellipse, ArcOfEllipse and combinations of those elements
- Bugfix for internalalignment creation of major and minor of ellipse and extension to arcofellipse
- Trim support for ellipses
- Solver threshold for rank calculation set at 1e-13.
- Trim support for arc of ellipse
- Ellipses and ArcOfEllipses as external geometry
- Validate Sketch now supports arcs of ellipse
- Tangents of Ellipse or ArcOfEllipse to any of ArcOfcircle, circle and Ellipse (using construction elements)
- Perpendicularity constraint
- Bug fix: Show/hide internal geometry not working for external geometry
- Visualization of Internal alignment constraints when selecting in the constraint widget
- Equality for ellipses and arc of ellipses
2014-12-20 12:33:31 +01:00
DeepSOIC
21354e9a8b
Sketcher Ellipse bug fixes:
...
- Fix of internal geometry creation
- Fix swapped negative and positive ends of major radius line on creation
- Removing the fudge factor (no longer needed)
- Fix to restore internal alignment - autodecide on constraint creation which point of the line is closer to the position
2014-12-20 12:33:30 +01:00
Abdullah Tahiri
fb0d830560
Sketcher Ellipse and ArcOfEllipse: Major bug fixes
...
- Change mode so that focus1 is not a point, but two doubles so that visual model and solver model match in number of points.
- Solver fix to deal with reduced constraint partials accuracy (threshold for matrix rank calculation tweak)
- Changes suggested by logari81
2014-12-20 12:33:30 +01:00
DeepSOIC
e423c308af
Sketcher Ellipse bug fix: Jump back on mouseup when shrinked
2014-12-20 12:33:29 +01:00
Abdullah Tahiri
a458c3e6d2
Sketcher New Feature: Ellipse support
...
- Ellipse introduction button via (center,majaxis extreme, a point in edge), ellipse is always CCW so that Z axis goes in the positive direction of the sketch
- Backwards compatibility with files of previous versions of ellipse not defining a phi angle
- Art by Jim (all the icons you see and the XPMs shown on creation of an ellipse)
- Element Widget support for ellipses
- Box selection for ellipses
- Point on Ellipse constraint based on the gardener's method based on Ulrich's function proposal (radcan simplified, i.e. with simplify_radical sage function)
- Tangent: Ellipse to Line based on DeepSOIC's geometric formulation (radcan simplified)
Sketcher New Feature: Internal Alignment Constraint
- The element to which internal alignment is applied has to be selected last.
- All other elements are added in the order of priority, taking into account existing elements
- Art by Jim (beautiful icons).
Sketcher New Feature: Tool to show/hide/restore the internal geometry of an element
- New functionality for show/hide internal geometry:
toggles between hiding all unused internal geometry elements and showing all internal geometry.
The restore function is implicit to the showing all internal geometry
Sketcher New Feature: Arc of Ellipse support
- Part::Geometry + Python implementation
- ArcOfEllipse creation method
- Art by Jim (all the icons you see and the XPMs shown on creation of arc of ellipse elements)
- Sketcher Element widget for ArcOfEllipse.
Bug fix: Select elements associated to constraints works now for foci internal alignment constraints
2014-12-20 12:33:29 +01:00
Abdullah Tahiri
6eec2e9851
Ellipse implementation: Art by Jim
...
- it also includes a shell script equivalent to the UpdateResources.bat for those who use linux
2014-12-20 12:31:27 +01:00
Richard M. Shaw
a8d24be3b3
Update CMake config to work with smesh 6.5.3.1.
...
New fork of standalone smesh is available here:
https://github.com/tpaviot/smesh
2014-12-19 11:23:38 +01:00
Peter Lama
662d72b4a3
Remove cmake requirement for fortran
...
Commit b253a148
2014-12-18 20:14:18 -08:00
wmayer
d8722070b8
+ extend State attribute of document object
2014-12-17 18:20:30 +01:00
wmayer
c1823efe38
+ fix build failure
2014-12-16 17:06:05 +01:00
wmayer
977fa48b77
+ handle std::exception in Document::slotChangedObject
2014-12-16 15:06:40 +01:00
wmayer
5aac822c71
+ issue #0001038 : Improve and show List properties in Tree View
2014-12-16 14:31:36 +01:00
wmayer
f37a752975
+ fixes #0001848 : Radius of circle given in degrees
2014-12-16 12:10:15 +01:00
wmayer
171a8cf85a
+ fixes #0001857 : Broken start page in Ukrainian language
2014-12-16 10:20:29 +01:00
wmayer
6e5118c9c8
+ fixes #0001038 : Improve and show List properties in Tree View
2014-12-15 23:54:55 +01:00
wmayer
78f07f8731
+ fixes #0001790 : Crash on undo/redo with a selection
2014-12-14 00:06:08 +01:00
wmayer
ff7e33b95d
+ reimplement copyObject based on merge document
2014-12-13 21:43:20 +01:00
wmayer
157ab9508e
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-12-13 19:35:53 +01:00
wmayer
f9986e54e4
+ get full dependency when copying an object
2014-12-13 19:35:28 +01:00
Yorik van Havre
0ea52029cd
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-12-13 13:37:19 -02:00
Yorik van Havre
7e86d94a48
Material: Added mk2's material cards
2014-12-13 13:36:51 -02:00
Yorik van Havre
4f3b1e2595
Drawing: added new set of empty templates - issue 1856
2014-12-13 13:30:15 -02:00
wmayer
69edf4b6c9
+ merge project on app level
2014-12-13 16:15:21 +01:00
Yorik van Havre
b2df659699
Fixed small error in concrete material
2014-12-12 14:56:27 -02:00
J.L. Cercos-Pita
f58807168d
Removed autotools makefile template
2014-12-12 14:49:58 -02:00
J.L. Cercos-Pita
5a23e77385
Fixed the module copy path
2014-12-12 14:49:58 -02:00
J.L. Cercos-Pita
fc7c75ba84
Regenrated the branch (rebase failed)
2014-12-12 14:49:58 -02:00
Yorik van Havre
94187a6872
Draft: small fix in Draft.py
2014-12-12 14:38:07 -02:00
wmayer
7801fbef3a
+ fixes #0001849 : Enable Spin Boxes support for Pad, Fillet and Chamfer
2014-12-11 18:25:30 +01:00
wmayer
5665302521
+ implement PrefQuantitySpinBox
2014-12-11 14:23:32 +01:00
wmayer
ae3755cf01
+ utc time with timezone
2014-12-10 15:39:45 +01:00
Sebastian Hoogen
7a8492fddc
use ISO 8601 timestamps including timezone
...
for creation and last changed properties
2014-12-10 12:52:06 +01:00
Sebastian Hoogen
fc14611c93
use 4 spaces to indent XML output
2014-12-10 01:33:51 +01:00
wmayer
d4a5249b4b
+ when creating picture check whether pbuffer is supported
2014-12-09 14:18:44 +01:00
wmayer
5da5be2eea
+ fix crash in spnav settings dialog while changing language, improve whitespaces
2014-12-09 13:44:25 +01:00
wood galaxy
6aa91b3622
Ready for merge : fix issues #1618 and #1607
...
Implement getSubVolume to cut wall with roof.
Now Roof is not hidden when removing it to a wall.
2014-12-08 12:23:01 -02:00
wood galaxy
341782ec54
Implement Overhang
2014-12-08 12:23:01 -02:00
wood galaxy
1876f36611
Fix bug if user enter thickness = 0
2014-12-08 12:23:01 -02:00
wood galaxy
715b5d7fe9
Add a new Arch Roof Builder
2014-12-08 12:23:01 -02:00
wmayer
c02590c666
+ support of merging projects on App level
2014-12-07 00:38:53 +01:00
wmayer
2608d0aaf2
+ 0001849: Enable Spin Boxes support for Pad, Fillet and Chamfer
2014-12-07 00:38:02 +01:00
wmayer
ec4a496866
+ when checking for custom toolbars do not auto-create sub-groups in user parameters
2014-12-06 14:46:08 +01:00
Sebastian Hoogen
c931bee01d
list multiple branches in version info
...
in case last commit is a octopus merge
2014-12-06 13:54:50 +01:00
Sebastian Hoogen
8a93916331
calculate the revision number from reference commit
2014-12-06 13:54:49 +01:00
Sebastian Hoogen
54cfed03ba
split the revision information
...
to a number for those commits common with the blessed master and a number for
those ahead of the current master
choose the url from available remotes
remove ssh username
accept ssh://[...].sf.net as origin
2014-12-06 13:54:48 +01:00
wmayer
2347d677dd
+ support global custom toolbars
2014-12-06 13:21:36 +01:00
jriegel
9a07c3ad9e
fix in reading results from Calculix
2014-12-06 13:10:09 +01:00
wmayer
4964628291
+ check if file handle is valid in FileInfo::isFile
2014-12-04 16:44:22 +01:00
wmayer
6872b2c393
+ fixes #0001736 : Parts with multiple colors are displayed in a single bad color after hiding
2014-12-04 14:36:43 +01:00
wmayer
0db3326e68
+ fixes #0001845 : The Project Utility drops the diffuse colors
2014-12-04 01:23:41 +01:00
Yorik van Havre
a6563fb03a
Draft: Fixed polygon center snap
2014-12-03 11:16:08 -02:00
wmayer
c6f1132664
+ degree symbol is not 7-bit ASCII, use utf-8
2014-12-03 10:26:15 +01:00
wmayer
3de3aa49d3
+ make sure to use valid compression level
2014-12-02 23:02:04 +01:00
wmayer
52dc0dda47
+ allow to modify placement via sub-attributes
2014-12-02 19:19:23 +01:00
wmayer
351ad4f6c7
+ fixes #0001363 : VRML export can produce corrupt files
2014-12-02 15:40:36 +01:00
wmayer
f5a4e68068
+ revert regression with mixing Python debug and release libs
2014-12-02 11:29:28 +01:00
wmayer
640c9cbf8b
+ fixes #0001361 : StartPage scripts and resources are installed twice
2014-12-01 15:57:23 +01:00
wmayer
dd3412b159
+ improve whitespaces
2014-12-01 11:36:33 +01:00
wmayer
73859191f3
+ exposing onBeforeChange to Python
2014-12-01 10:58:25 +01:00
jriegel
38fc7ba604
Merge branch 'refs/heads/master' into review-CL-Bundler
2014-11-29 15:43:19 +01:00
wmayer
2896372a75
+ fix mesh unit tests
2014-11-29 15:17:58 +01:00
wmayer
c04c513b41
+ fix typo, consistent icon name
2014-11-26 14:36:11 +01:00
Abdullah Tahiri
fe3beb89fd
Sketcher Enhancement: Merge sketches : Art by Jim
2014-11-26 14:23:46 +01:00
Abdullah Tahiri
0f72bc68ba
Sketcher Enhancement: Merge sketches
...
- It copies the geometry and associated constraints of a plurality of sketches into a new sketch
- The functionality is accessible from outside sketch edit mode, directly from the menu Sketch
2014-11-26 14:23:14 +01:00
Sebastian Hoogen
debca91e98
remove support for automake
2014-11-26 10:26:30 +01:00
wmayer
c9ab183bf4
+ set DBL_MAX as maximum for units
2014-11-24 14:30:50 +01:00
Sebastian Hoogen
428b47d74a
importOpenSCAD: support for projection(cut=true)
2014-11-23 19:26:28 -02:00
Sebastian Hoogen
c8934c06a8
enhancements in exportDRAWEXE.py
...
simplify float formatting
support for Part::Thickness in exportDRAWEXE.py
support for Draft::Ellipse in exportDRAWEXE.py
support for Annotations
2014-11-23 19:24:34 -02:00
Yorik van Havre
58a84d2748
Arch: small fix in sectionplane - fixes #1836
2014-11-23 19:23:13 -02:00
wmayer
3c61d41dbf
+ fix bug in mesh bounding box, fix clang warning
2014-11-23 10:55:36 +01:00
jriegel
7d30060c4e
fix in destruction of the application
2014-11-22 16:41:22 +01:00
jriegel
81ef381b66
fix for VC9
2014-11-22 14:34:05 +01:00
jriegel
10ff1e579d
fix bug on highlighting invisibel nodes
2014-11-22 13:51:31 +01:00
jriegel
1bc6df8eac
Merge branch 'refs/heads/master' into review-CL-Bundler
...
Conflicts:
src/3rdParty/salomesmesh/CMakeLists.txt
2014-11-22 13:51:04 +01:00
jriegel
6483c66cba
small fix for VS 2013
2014-11-22 12:46:10 +01:00
wood galaxy
c5f2e9e56b
Add PointOnObject constraints to 2-pane window
2014-11-21 23:11:29 -02:00
wood galaxy
af89ebc803
add preview CutVolume in Arch CutPlane
2014-11-21 23:03:53 -02:00
wood galaxy
5f261fb636
make compatible with Part typed object
...
tool make a Part Cut object when object are not Arch typed.
the cutVolume is now Red and 75 transparence
2014-11-21 23:03:53 -02:00
wmayer
d354e21ce5
+ prepare for netgen 5.x support
2014-11-20 16:30:10 +01:00
wmayer
6bdf0b4b76
+ minor fix
2014-11-19 22:56:29 +01:00
wmayer
be7f583aa0
+ fix issues on 64-bit Linux/MacOSX systems
2014-11-19 15:32:35 +01:00
wmayer
b11acfd165
+ handle unicode strings in class PythonWrapper
2014-11-19 11:18:18 +01:00
WandererFan
7a201f9b74
Work around for Mantis issue 0954 on Helix Primitive
...
To be removed after OCC helix bug corrected.
2014-11-17 17:45:34 -05:00
wmayer
3904d0a8ee
+ fixes #0001830 : Gui.export() cannot handle long filenames
2014-11-17 21:11:28 +01:00
wmayer
3d03e208d9
+ fixes #0001829 : DlgPrimitives replaces non ASCII charaters in objects Labels by ?
2014-11-17 20:36:22 +01:00
wood galaxy
e070a717a5
improvement to Cut Plane
...
Move cut plane on itw own.
Add ArchCutPlan to CmakeList
Add task panel
Add choice between side of the face
2014-11-17 15:44:11 +01:00
DeepSOIC
86a1757c20
Sketcher: Slot: proper tangent constraints
...
Endpoint-to-endpoint tangency is applied now instead of
tangency+coincident.
Fixes issue #0001828 ( http://freecadweb.org/tracker/view.php?id=0001828
)
2014-11-16 23:14:41 +01:00
wmayer
62de0655d7
+ fix inconsistency problem after undo/redo
2014-11-16 19:13:06 +01:00
wmayer
2ead6f9bcf
+ whitespace improvement
2014-11-16 19:12:34 +01:00
wmayer
7a307cdab3
+ fix crash when dragging a point adter undoing the deletion of a line
2014-11-16 19:11:31 +01:00
wmayer
4e2cbaf045
+ fix saving problem with file names containing an apostrophe
2014-11-15 22:45:56 +01:00
jriegel
6f907c3b48
some fixes in build with CL-Bundler
2014-11-15 21:18:22 +01:00
wmayer
a622d14c2d
+ port to CMake 3.0
2014-11-15 18:48:58 +01:00
wmayer
fc903d93df
+ support adding circles as external geometry not lying on the sketch plane
2014-11-15 14:31:24 +01:00
jriegel
8c1b1aa86b
Port to VC12
2014-11-15 14:07:02 +01:00
jriegel
f2d990d9ca
fix some warnings in cMake
2014-11-15 13:22:48 +01:00
jriegel
f4fc7e88fa
Merge remote-tracking branch 'refs/remotes/peterl94-github/new-libpack' into review-CL-Bundler
2014-11-15 13:07:23 +01:00
Peter Lama
f13f5dc520
Add support for CLbundler created LibPack
...
* New 'UseLibPack' cmake file sets CMAKE_PREFIX_PATH so that find_package
can be used for most packages.
* Mimic fc_wrap_cpp defined in other 'UseLibPack' files. Some file
dependencies did not get set correctly otherwise.
* OCE 0.16 does not have Standard_ctype.hxx
* shfolder.h can't be used with Win SDK 7.0
2014-11-14 08:01:09 -08:00
Yorik van Havre
18c0b3ba69
Arch: small optimization in archframe code
2014-11-13 19:30:02 -02:00
wood galaxy
1ce87b2ecf
make BasePoint compatible with Frame without BasePoint
2014-11-13 19:26:11 -02:00
wood galaxy
659add8ba3
Add BasePoint Property to Arch Frame
...
BasePoint allow user to change by wich vertex of the profil the frame
passe of.
2014-11-13 19:26:11 -02:00
wood galaxy
f7830b8da3
Make cutComponent working
2014-11-12 15:36:16 -02:00
wood galaxy
b17f401c5c
Add arch cutComponent feature
2014-11-12 15:36:16 -02:00
Yorik van Havre
c07d2ad91b
Draft - small (provisory) encoding fix - fixes #1825
2014-11-11 20:11:31 -02:00
wmayer
730ad0fbea
+ support anti-aliasing in offscreen renderer
2014-11-10 14:10:38 +01:00
Yorik van Havre
04c1530b09
Draft: trimex extrusions now sets the solid property of the extruded object to True
2014-11-10 09:44:38 -02:00
Yorik van Havre
039cacbfde
Arch: fixed encoding problem in Survey tool - fixes #1821
2014-11-09 17:27:37 -02:00
wmayer
d30eb39a1e
+ fixes #0001808 : Double Clicking Sketcher PolyLine Causing Crash
2014-11-09 17:59:54 +01:00
wmayer
efe414e4c2
+ fix transparency problem, support antialiasing, background color issue
2014-11-08 23:06:53 +01:00
wmayer
99caf6d015
+ support of arbitrary background colors in snapshot function
2014-11-08 18:23:41 +01:00
wmayer
e753af2fd7
+ fix possible scaling problem of datum label
2014-11-08 15:55:47 +01:00
wmayer
97696aadfa
+ fix gradient background issue when creating snapshot, remove superfluous signal from FileOptionsDialog
2014-11-08 14:50:27 +01:00
wmayer
bedd2b15a7
+ fix copying Python resource files to destination on Windows
2014-11-08 11:08:58 +01:00
Sebastian Hoogen
9426f5d4cf
OpenSCAD rc file is now compiled at build time
2014-11-06 23:31:24 -02:00
wmayer
82ed56a3a9
+ fix bug in SoQTQuarterAdaptor::processSoEvent
2014-11-06 19:14:14 +01:00
Stefan Tröger
69f4bbb2ef
fixes #0001781 : Reimplement arrow keys for 3d view
...
- including minor formating fixes
2014-11-06 18:56:51 +01:00
wmayer
4a28b93521
+ workaround for cropped images with Coin4
2014-11-06 16:49:50 +01:00
WandererFan
ba97d17b2a
Fix #0001722 Left-handed helix with an angle>0 produces 1 too many turns
2014-11-06 10:49:02 -02:00
Yorik van Havre
75deaa658f
Arch and Draft rc files are now compiled at build time - issue #1796
2014-11-05 20:07:53 -02:00
blobfish
8d8c727ac5
Part: ModelRefine: Fix for avoid edges of edgeFuse not working
2014-11-05 14:54:38 +01:00
blobfish
37e0750cd2
Part: ModelRefine: adding bspline support
2014-11-05 14:54:36 +01:00
blobfish
0a94a9b78c
Part: ModelRefine: Add FixMissingSeam
2014-11-05 14:54:36 +01:00
blobfish
1b9773299a
Part: ModelRefine: fix for missing tolerances.
2014-11-05 14:54:35 +01:00
Jan Rheinländer
7d359a4618
Part: ModelRefine: Enhancement for cylindrical faces
2014-11-05 14:54:34 +01:00
wmayer
fa3a2a0d3a
+ fix various rendering problems
2014-11-04 18:56:05 +01:00
wmayer
3507e301c2
+ improve plane fit
2014-11-04 15:03:25 +01:00
wmayer
5c84e47422
+ fixes #0001816 : parseQuantity returns garbage
2014-11-04 14:51:19 +01:00
wmayer
d66fc092e1
+ better exception handling in Part module
2014-11-04 11:03:51 +01:00
wmayer
a7157ce6a9
+ add new render type to 3d viewer
2014-11-03 23:09:38 +01:00
wmayer
980b17ca86
+ improve error handling in plane fit
2014-11-03 18:20:55 +01:00
WandererFan
fc6d57f8b3
Fix #1787 Draft.PathArray align
...
Correct handling of Euler angle calculations.
2014-11-03 10:24:23 -02:00
Yorik van Havre
2836f4cb99
Arch: Provisorily implemented workaround for utf8 paths and ifcopenshell - issue #1795
2014-11-02 15:47:29 -02:00
wmayer
ae09625140
+ expose function to Python to check for invalid mesh points
2014-10-31 15:57:28 +01:00
wmayer
267ca0813a
+ fixes #0001798 : Support general ellipsoid with three radii
2014-10-30 18:02:18 +01:00
wmayer
1f450972d2
+ change between AP203 and AP214 schemes
2014-10-30 13:07:25 +01:00
wmayer
92ebfab47a
+ customize STEP header
2014-10-30 11:48:33 +01:00
wmayer
76906d20a0
+ customize IGES header
2014-10-29 16:39:33 +01:00
wmayer
b6df4a490e
+ header for IGES files (disabled)
2014-10-29 12:29:48 +01:00
wmayer
c67f326174
+ split STEP and IGES settings into separate pages, handle Brep mode of IGES format
2014-10-28 19:27:23 +01:00
wmayer
9256de8c1a
+ fixes #0001665 : Allow setting higher value for number of backup files
2014-10-28 18:15:51 +01:00
wmayer
822e45c4f7
+ fixes #0001806 : Wrong object name shown in App::PropertyLink Properties in the property editor
2014-10-27 17:05:27 +01:00
wmayer
429e55d744
+ make sure to set unique labels for newly created documents
2014-10-27 13:11:50 +01:00
wmayer
a239e7b194
+ fixes #0001797 : Fix focus problem with Quarter based viewer
2014-10-27 11:36:33 +01:00
wmayer
30d38e6749
+ fix bug in Python binding of Quarter viewer
2014-10-24 19:29:35 +02:00
wmayer
f119e740c8
+ port cache context handling
2014-10-22 15:26:22 +02:00
wmayer
621aebdbef
+ change API of GLPainter
2014-10-22 14:48:38 +02:00
wmayer
8fb596221f
+ fixes #0001794 : new defined as a macro sometimes conflicts with boost
2014-10-22 12:39:43 +02:00
wmayer
61ec6e2924
+ fix problem with disappearing content of image view
2014-10-22 10:59:17 +02:00
wmayer
28d1bf5ed9
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-10-21 21:41:28 +02:00
wmayer
7602b8f20c
+ make help system more flexible
2014-10-21 21:41:07 +02:00
wmayer
6b98223c07
+ remove useless statement
2014-10-21 21:40:25 +02:00
wmayer
d98f883a7e
+ formatting message
2014-10-20 21:43:35 +02:00
Sebastian Hoogen
da4c4aacbe
Output Mac OS version (or Windows 8) on splashscreen
2014-10-19 20:02:10 +02:00
wmayer
4259a9391b
+ save last used export/import filter
2014-10-19 19:42:50 +02:00
wmayer
5ddb891bd3
+ fix Python binding of 3d viewer
2014-10-19 18:59:05 +02:00
wmayer
ab66d0a45f
+ fix more Quarter port issues
2014-10-19 17:49:31 +02:00
wmayer
5912342e3f
+ support of home path with non-ASCII chars
2014-10-19 17:27:02 +02:00
wmayer
eb89cb422c
+ harmonize API
2014-10-19 14:28:39 +02:00
wmayer
f233a50a00
+ harmonize API
2014-10-19 14:25:51 +02:00
wmayer
21eae7f900
+ port Sandbox module to Quarter
2014-10-19 12:16:33 +02:00
Yorik van Havre
bd1bbff874
Draft: Disabled automatic DXF library download - fixes #1785
...
Note for existing users: Can be reenabled in menu Edit > Preferences >
Import-Export > DXF > Automatic update
2014-10-18 10:21:26 -03:00
wmayer
dd392efeb1
+ fixes #0001735 : Ellipsoids visibility problems
2014-10-16 19:36:54 +02:00
wmayer
84bd9a4a88
+ fixes #0001779 : memory leak
2014-10-16 18:57:53 +02:00
Sebastian Hoogen
bce3de5b5d
move exportDRAWEXE.py to Sandbox WB
2014-10-15 15:53:52 +02:00
Sebastian Hoogen
31c39e222a
fixes #1706 rename anaglyph stereo mode red/cyan
2014-10-15 15:53:18 +02:00
Sebastian Hoogen
81d4b94902
issue #1788 SVG output of trimmed curves
2014-10-15 15:52:59 +02:00
wmayer
ea967caecc
+ fix build failure
2014-10-15 15:45:40 +02:00
wmayer
7422f073ea
+ share GL widgets when creating further 3d views of a document
2014-10-15 12:04:06 +02:00
Sebastian Hoogen
8711bdd78f
issue #1573 remove unavailable headers
2014-10-14 18:46:24 +02:00
Abdullah Tahiri
ca1eba6107
Sketcher: Element Widget enhancement: Support for external geometry
...
Python naming used is "ExternalEdge" for consistency with the name appearing in the status bar when selecting that object.
As discussed:
http://forum.freecadweb.org/viewtopic.php?f=10&t=6861&sid=bd9ad10357f8a7de146c4fbd2d53c23b&start=90
2014-10-14 18:33:21 +02:00
wmayer
a96f390097
+ fix build problems with Python & MacOSX
2014-10-13 22:02:57 +02:00
Sebastian Hoogen
a53a239f2f
issue #1027 use unicode filepaths
2014-10-11 13:32:06 +02:00
Sebastian Hoogen
05af9207a3
use Icons for Refine and Increase tolerance features
2014-10-11 13:09:33 +02:00
Sebastian Hoogen
f1283cf24c
fixes #1782 remove unused precsion parameters
...
from gp_Trsf::SetValues
2014-10-11 13:03:02 +02:00
Sebastian Hoogen
eb598ffd16
fixes #1740 quote pov-ray binary on windows
...
this fixes a bug introduced by 3523741e96
2014-10-11 12:56:38 +02:00
wmayer
980d1eb0eb
+ fix expressions
2014-10-10 19:01:34 +02:00
wmayer
71154f5f25
+ fix issues with force constraint
2014-10-10 17:42:33 +02:00
wmayer
96e286a060
+ fix anti-aliasing issue
2014-10-10 16:58:02 +02:00
wmayer
39f2132029
+ fix whitespaces
2014-10-10 15:48:31 +02:00
wmayer
4a3838fa44
+ fix stack overflow error
2014-10-10 15:47:20 +02:00
Yorik van Havre
daedcf4f1c
Draft: Adapted Draft module for python3 compatibility - issue #995
2014-10-05 19:40:14 -03:00
Yorik van Havre
8d2e08ffa0
Little fixes to allow pycxx to compile with python3
2014-10-05 17:31:17 -03:00
Yorik van Havre
3c091ac69a
Draft: prevented possible deletion of draft wire during edit - fixes #1680
2014-10-05 17:30:18 -03:00
Sebastian Hoogen
f2367c6c19
bugfix in unit parser
...
partly revert to 810fadab23
2014-10-05 14:44:04 -03:00
Yorik van Havre
9671d9658b
Arch: Fixed axis object - fixes #1605
2014-10-05 13:09:08 -03:00
Jose Luis Cercos-Pita
4de77a921a
Set PySide to all ambiguous QtGui and QtCore calls
2014-10-04 11:42:34 -03:00
Yorik van Havre
537e759142
Draft: Added DraftGeomUtils.pocket2d(shape,float)
...
Returns a list of wires obtained by offsetting the wires of the given
shape by the given amount (outer wire inside, inner wires outside) and
resolving intersections
2014-10-03 17:35:40 -03:00
wmayer
05de6c103f
+ add missing header to Tools2D.h
2014-10-02 11:40:39 +02:00
Yorik van Havre
3540634c34
Start: Set version info text color to white - fixes #1772
2014-10-01 19:27:50 -03:00
wmayer
f02da38566
+ fix Qt help problems
2014-10-01 17:16:43 +02:00
Stefan Tröger
3cbfb0a5c7
Prevent QPainter buffer swap
...
As the QGraphicsScene overlay does not work for all cards/drivers we disable the possible buffer swap of the qpainter, as this could be a potential source of the flickering. If the painter swaps buffers and we do it again the user will see first the correct picture (first swap) and then something uninitalized (second swap)
2014-09-29 10:11:29 +02:00
Stefan Tröger
4e63e11df6
Make stereo modes work again
...
Be aware that stereo rendering based on SoRenderManager does not allow background colors as the opengl buffers are cleared before rendering. As FreeCAD draws the background before the standart coin rendering the background gets erased again.
2014-09-29 10:11:28 +02:00
wmayer
ac010de9c9
+ fix minor bug when adding coincidence constraint
2014-09-28 15:06:02 +02:00
Yorik van Havre
463b5d4a7e
Draft: display coordinates using the current locale's decimal separator - fixes #1741
2014-09-27 16:23:59 -03:00
Sebastian Hoogen
e820a32653
issue #1701
2014-09-27 13:07:30 -03:00
wmayer
f0bf3cb6ab
+ Proper handling of sketch plane parallel to view direction
2014-09-27 15:53:21 +02:00
Yorik van Havre
f87bd2ac35
Patched PyCXX 6.2.5 with original FreeCAD changes made in 6.2.0
2014-09-24 18:19:26 -03:00
Yorik van Havre
69c4b37fe6
Fixed relativepaths in PyCXX
2014-09-24 18:19:25 -03:00
Yorik van Havre
ad3908cca6
Upgraded PyCXX to version 6.2.5
2014-09-24 18:19:25 -03:00
Yorik van Havre
16e8b0ee3f
Draft: Reverting provisorily to the old version of DraftGeomUtils.sortEdges
2014-09-24 18:13:55 -03:00
Yorik van Havre
f0c59e4cc2
Arch: fixed string encoding in Space object
2014-09-24 18:13:18 -03:00
wmayer
e88b712ff9
+ fix typos
2014-09-24 22:06:13 +02:00
wmayer
6e92028ca6
+ add option to disable automatic fit to view when loading data file
2014-09-24 18:49:19 +02:00
wmayer
23a58fedf7
+ fix warnings with clang
2014-09-24 18:00:46 +02:00
wmayer
032c893183
+ fix warnings with clang
2014-09-24 17:46:04 +02:00
wmayer
5201223da4
+ fix warnings with clang
2014-09-24 16:00:10 +02:00
wmayer
003c2bf77d
+ fix warnings with clang
2014-09-24 15:55:36 +02:00
wmayer
dfd2eb3327
+ fixes #0001762 : Update 'About FreeCAD' Screen
2014-09-23 19:31:37 +02:00
wmayer
c20e83e0d6
+ set fix precision for FPS counter
2014-09-23 18:19:35 +02:00
wmayer
3ff7d569c8
+ fix build error
2014-09-23 12:51:31 +02:00
Stefan Tröger
71e0793493
fix framerate rendering
2014-09-23 10:11:12 +02:00
Stefan Tröger
deda49b098
fix qt moc warnings
2014-09-23 10:11:12 +02:00
Stefan Tröger
42ae8a6246
fix backlight issue
2014-09-23 10:11:12 +02:00
Stefan Tröger
cc5c9f6031
ensure that the glwidget is returned
2014-09-23 10:11:12 +02:00
Stefan Tröger
d02d966b9c
fix rotation center after view all
2014-09-23 10:11:12 +02:00
Stefan Tröger
ad1bfc32fb
fix reported bugs
...
- compile on windows
- fix cursors
2014-09-23 10:11:12 +02:00
Stefan Tröger
b18ebc9064
Port QuarterWidget to QGraphicsView
...
Derive from QGraphicsView instead of QGLWidget to allow to add widgets as overlay over the 3d scene later on.
2014-09-23 10:11:12 +02:00
Stefan Tröger
cf167ec60a
add View3DInventorViewer python interface
...
As quarter is not wrapped by SWIG we need to expose our own python interface class.
This is a start with the most important functions to access the render and event
manager. Furthermore all extra functions available next to the swig wrapper functions
are exposed. Everything else can be added when needed.
2014-09-23 10:11:12 +02:00
Stefan Tröger
eb7f1bf3e5
Adopt mouse selection to quarter widget
...
Quarter Widget soes not allow to switch of multisampling on the fly, therefore we need to use glgraphicsitem instead of direct opengl xor rendering for mouse selection
2014-09-23 10:11:11 +02:00
Stefan Tröger
72cab0c002
Adaption of FreeCAD to QuarterWidget
...
-removes all soqtviewer references
-create a quarter adaptor class which implements missing functionality
-adopts freecad code to make use of SoRenderManager and changed View3DInventorViewer interface
2014-09-23 10:11:11 +02:00
Stefan Tröger
e1265c874d
add default quarter files
2014-09-23 10:11:11 +02:00
Yorik van Havre
e08788eca9
Arch: Extended role property to all Arch objects - fixes #1577
2014-09-21 15:12:06 -03:00
Yorik van Havre
4f5f9be38c
Spreadsheet - added a recompute() - fixes #1761
2014-09-21 14:40:01 -03:00
Sebastian Hoogen
856418a2e5
use the commit time (in UTC) in version information
...
as it is more meaningfull than the author time
2014-09-20 21:54:41 +02:00
wmayer
eae8f22ee5
+ add lost s
2014-09-20 18:01:40 +02:00
wmayer
26e01e0900
+ build with Qt < 4.7 and OCC < 6.5
2014-09-20 17:49:29 +02:00
Sebastian Hoogen
6a89b33816
fixes #1745 Encode Annotation Text using latin1
...
for Coin Versions <= 3
2014-09-20 16:26:59 +02:00
Sebastian Hoogen
6ad50db01b
fixes #1744 Use unicode in Unit system
2014-09-20 08:58:06 +02:00
Yorik van Havre
810fadab23
Fixed bug introduced by last commit
2014-09-19 13:13:34 -03:00
Sebastian Hoogen
e54297313b
fixes #1755 : don't translate toolbar names
...
in InitGui.py of Arch and Spreadsheet
2014-09-19 10:35:00 -03:00
jriegel
6561b99347
Merge branch 'refs/heads/Rift'
2014-09-19 11:08:00 +02:00
jriegel
3d00535d57
FreeCAD-VR: Small fix for older compilers
2014-09-19 11:03:35 +02:00
Yorik van Havre
fbeb7beba3
Fixed label of document - fixes #453
2014-09-18 20:17:50 -03:00
Yorik van Havre
328bdcf636
Draft: small fix in trackers - fixes #1757
2014-09-18 19:39:37 -03:00
Yorik van Havre
6e5fbc74a8
Added base translation file for the Web WB - issue #453
2014-09-18 12:24:16 -03:00
Yorik van Havre
0f559a7184
Draft: Fixed rotation UI unit - fixes #1664
2014-09-18 11:18:15 -03:00
Yorik van Havre
f796cacf65
Draft: Grid now checks preferences settings when redrawn - fixes #1671
2014-09-18 11:09:43 -03:00
Abdullah Tahiri
749abc5ed7
Sketcher fixes: Symmetry arrows properly scaled, fixed icon in constraint taskbar list contextual menu
2014-09-18 16:01:34 +02:00
jriegel
a81308ab57
FreeCAD-VR: Small cleanups
2014-09-18 10:25:28 +02:00
Yorik van Havre
524e5cbe32
Arch: Added sill height option to creation dialog - fixes #1609
2014-09-17 20:24:35 -03:00
Yorik van Havre
552c0b3af3
Arch: fixed window movements - fixes #1597
2014-09-17 19:39:54 -03:00
Yorik van Havre
7f90948712
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-09-17 14:20:07 -03:00
Yorik van Havre
e7cc192650
Draft: provisorily fixed error in sortEdges
2014-09-17 14:19:42 -03:00
jriegel
719c6e9425
FreeCAD-VR: fix Z direction
2014-09-17 19:13:48 +02:00
jriegel
b5c2554378
FreeCAD-VR: Proper light handling
2014-09-17 18:55:51 +02:00
Abdullah Tahiri
02cb12db52
Sketcher enhancement: Constraint icons visible over lines
2014-09-17 18:49:40 +02:00
Abdullah Tahiri
d562e1a389
Sketcher Art enhancement: New Symmetric constraint icon by Jim
...
There is more space in between the > < symbols now, so it is more clear as it overlaps less.
Thanks Jim!
2014-09-17 18:49:16 +02:00
Abdullah Tahiri
0adfa0a7ed
Sketcher Bug fix: Arrows for symmetry constraint are back
...
The arrows were there in the code, but at a certain point, code was written to set the this->imgHeight value programatically, based on
whether it had text or not. As symmetry constraint does not have text the variable failed to initialize. Being zero, it did not pass
the ASSERT in the render function, so it was not rendered.
This includes Werner's fix for improver cast of a SoRayPickAction to SoGLRenderAction:
SbVec2s vp_size = static_cast<SoGLRenderAction*>(action)->getViewportRegion().getWindowSize();
to
SbVec2s vp_size = SoViewportRegionElement::get(state).getWindowSize();
At least sometimes tt is a SoRayPickAction because:
When you move with the mouse over the sketcher (when in edit mode) you enter the method ViewProviderSketch::mouseMove.
Inside there the method getPointOnRay is called to get a picked point underneath the cursor. Inside the latter method
an instance of SoRayPickAction is created to traverse the scene graph. After a long cascade of function calls you
finally enter SoDatumLabel::generatePrimitives(SoAction*).
2014-09-17 18:48:54 +02:00
Abdullah Tahiri
fdb7de1dda
Sketcher visualization enhancement: Do not group sketcher symmetry icons.
...
Do not add a symmetry constraint icon to a group of icons, so that it lies on the line or point providing the symmetry (symmetry axis/point),
as it is more clear to the user which line this is.
2014-09-17 18:48:36 +02:00
Abdullah Tahiri
95c512d9a1
Sketcher feature enhancement: Symmetry constraint perpendicular to axis of symmetry
...
Solves Mantis ticket: http://www.freecadweb.org/tracker/view.php?id=1623
Unrelated minor fix: remove unused variable
2014-09-17 18:48:15 +02:00
jriegel
9a19baa8f5
FreeCAD-VR: Positional light and fix in camera positioning
2014-09-17 18:35:11 +02:00
Yorik van Havre
6e9d2e9b21
Draft: Added progress bar to dxf library download - fixes #1644
2014-09-17 13:30:51 -03:00
Abdullah Tahiri
da2df00eea
Sketcher visualization: Increase readability of redundant constraint solver message
...
Color changed to "OrangeRed" to improve readability.
2014-09-17 16:43:51 +02:00
Abdullah Tahiri
5f2670dbcf
Sketcher Redundant/Conflicting art by Jim
2014-09-17 16:43:51 +02:00
Abdullah Tahiri
34cc7c3136
Sketcher new feature: Select Conflict and Redundant Constraints
...
Based (and solves) Mantis ticket:
http://www.freecadweb.org/tracker/view.php?id=1643
The ticket refers only to redundant, and ask for deletion.
Two commands are created, one for redundant constraints and other for conflicting constraints.
As usually removing one constraint of the "at least one" is sufficient, the implementation selects the constraints (but does not delete them).
The user therefore easily identify the constraints involved and decide to delete them.
This implementation takes into account the edit->Actsketch that ViewProvidedSketch creates for solving, as it is this instance the one that generates the messages in the Sketcher Taskbar.
No buttons in the toolbar by default (can be added by the user), but an hyperlink in the solver messages which triggers the selection of the appropriate command (conflicting or redundant).
2014-09-17 16:43:50 +02:00
Abdullah Tahiri
bdbf5140f9
Sketcher new feature: Selects the elements associated with the selected constraint(s)
...
Ex 1: User selects constraints from the list => right click => select "select elements" from the contextual menu => The elements (edges,vertex) involved in the constraint(s) are selected.
Ex 2: User selects (a) constraint(s) => Clicks button in toolbar (if included by the user) => The elements (edges,vertex) involved in the constraint(s) are selected.
Intended as visual aid to see which elements are being affected by a constraint.
Requested by Jim on thread:
http://forum.freecadweb.org/viewtopic.php?f=19&t=6875&start=10
Solving another Mantis ticket I can not find now.
2014-09-17 16:43:49 +02:00
jriegel
4c7fb2d0f0
FreeCAD-VR: Upright position and remembering render window position
2014-09-17 15:01:28 +02:00
jriegel
1c741b6e0d
FreeCAD-VR: Remove Tabs and add orientation for viewer position
2014-09-17 13:49:44 +02:00
Sebastian Hoogen
d537fc9b53
try to use Execptions in Draft module
2014-09-17 12:52:36 +02:00
Sebastian Hoogen
333e6e3155
use exceptions in OpenSCAD module
...
derive OpenSCADError from FreeCADError if possible
2014-09-17 11:59:49 +02:00
Sebastian Hoogen
57db95a1c3
issue #1701 removed further except: statements
2014-09-17 11:57:32 +02:00
Sebastian Hoogen
ed66ada1cf
issue #1700 replace PyExc_Exception
2014-09-17 11:15:57 +02:00
Sebastian Hoogen
1b1d8010a6
removed catch (...) in Drawing
...
which discarded type information when rethrowing base type
2014-09-17 11:15:56 +02:00
Sebastian Hoogen
5e51a6cdf7
fixes #0001422 : Subclass Exception
...
inherit Base.FreeCADError form RuntimeError
inherit Part.OCCError from Base.FreeCADError
inherit OCCDomainError from Part.OCCError
inherit OCCRangeError from Part.OCCError
inherit OCCConstructionError from OCCDomainError
inherit OCCDimensionError from OCCDomainError
Added PY_CATCH_OCC macro
replace PyExc_Exception
use FreeCADError in makeWireString
catch exception in BSplineCurve.increasedegree
2014-09-17 11:15:56 +02:00
Yorik van Havre
f1dffbb90e
Arch: Hide/show windows together with their parents - fixes #1733
2014-09-16 20:03:50 -03:00
Yorik van Havre
9f7956b17e
Web: Added an Open Link In External Browser context menu option - fixes #1017
2014-09-16 14:16:44 -03:00
jriegel
0d6ccb7654
FreeCAD-VR: Some fixes
2014-09-16 18:14:42 +02:00
Yorik van Havre
302fcde1e0
Startpage now checks for new versions - issue #1017
...
After loading, the startpage now checks for
http://www.freecadweb.org/version.php and compares
with current version, and displays a message accordingly.
2014-09-16 12:58:07 -03:00
Yorik van Havre
b0c66cf6f7
Draft: fixed typo
2014-09-16 11:26:47 -03:00
Abdullah Tahiri
4aa71db3c8
Sketcher Element Widget enhancement: Auto-switch to Edge (first valid type)
...
Feature requested by nahshon.
- In auto-switch to edge mode, actually switch to first valid type, which is always
edge, except for a point. It reduces the amount of clicks when dealing with points.
- Correction of a typo.
2014-09-16 10:12:53 +02:00
Yorik van Havre
a4f208c8ac
Draft: replaced DraftGeomUtils.sortEdges with better version from pkoning2 - fixes #1691
2014-09-15 17:30:37 -03:00
Yorik van Havre
78f34666b2
Draft: Added a button to Dimension UI to select existing edges - fixes #1636
2014-09-15 17:05:44 -03:00
Yorik van Havre
4b59ef1586
Draft: fixed sticky fonts - fixes #1725
2014-09-15 16:43:14 -03:00
Yorik van Havre
0446f60277
Draft: fixing bugs in previous commit
2014-09-15 15:56:07 -03:00
Sebastian Hoogen
1100d2d0bd
move encoding strings for coin to function
2014-09-15 15:45:44 -03:00
jriegel
2a4626d27a
FreeCAD-VR: Render the FreeCAD scene graph
2014-09-15 19:50:55 +02:00
Yorik van Havre
96eccd44ae
Draft: upgrade tool now converts single-linear-edge objects into Draft lines
2014-09-15 12:51:26 -03:00
jriegel
0d2ce7073a
FreeCAD-VR: Separating FreeCAD and Coin/Rift stuff
2014-09-15 17:14:44 +02:00
jriegel
069da65528
FreeCAD-VR: some fixes on FrameBuffer rendering portion
2014-09-15 16:27:40 +02:00
wmayer
470a414241
+ fixes #0001715 : Mefisto Mesh Fails since translated by f2c
2014-09-14 18:26:12 +02:00
jriegel
66a58c40ad
FreeCAD-VR: Some fixes...
2014-09-14 14:57:07 +02:00
jriegel
250426f792
FreeCAD-VR: Handling the safety warning
2014-09-14 13:54:02 +02:00
Sebastian Hoogen
5d406144aa
use utf-8 for coin4 and latin1 for coin3
2014-09-14 11:08:55 +02:00
Yorik van Havre
a0e461a925
Arch: minor bugfix
2014-09-13 18:23:35 -03:00
jriegel
ad2406a763
FreeCAD-VR: First succesfull render on the Rift!
2014-09-13 20:03:57 +02:00
Yorik van Havre
8b25a40cbf
Arch: equipments now choose type (Part or Mesh) on creation based on the base object
2014-09-13 13:54:47 -03:00
Yorik van Havre
ce0f2452c8
Mis upgrades for the selection window - fixes #1737
...
* Added a search box that searches through object labels
* Added a context menu to selected items
* Allow to double-click an item to isolate
2014-09-13 12:02:45 -03:00
jriegel
c0152eeb68
FreeCAD-VR: command integration
2014-09-13 10:18:52 +02:00
jriegel
537d7edfd8
porting the offscreen rendering version to SDK 4.2
2014-09-12 20:15:04 +02:00
jriegel
6c170bce18
Merge branch 'refs/heads/master' into jriegel/Rift
2014-09-12 12:27:55 +02:00
Yorik van Havre
7318a1d443
Arch: minor improvements in panel
2014-09-11 19:27:33 -03:00
Yorik van Havre
9af4df3ce5
Draft: minor fix in Shapestring
2014-09-10 15:56:50 -03:00
wmayer
d1fb7fa839
+ do not add units to translation
2014-09-10 10:35:49 +02:00
Yorik van Havre
93e01c16b6
Draft: Fixed copying of Draft points
2014-09-05 17:48:30 -03:00
Yorik van Havre
a723ec4b81
Draft: Allow sticky fonts in ShapeString
2014-09-04 15:57:59 -03:00
wmayer
3d6ba6c5d6
+ fixes #0001726 : Dialog for saving document should indicate documentname
2014-09-03 14:45:19 +02:00
wmayer
2f4ce2bbc0
+ Add StackWalker to get log messages on crashes (MSVC only)
2014-09-03 11:48:34 +02:00
Yorik van Havre
620a4dde93
Arch: small fix to Remove tool
2014-09-02 23:04:44 -03:00
wmayer
8f54360226
+ minor fix
2014-09-02 17:43:25 +02:00
Sebastian Hoogen
a81a307346
issue #1700 replace raise Exception()
2014-09-01 22:47:05 +02:00
wmayer
e5a54d0791
+ fixes #0001714 : FreeCAD 0.14 Stable crashes when importing a step model
2014-09-01 19:11:46 +02:00
Sebastian Hoogen
2c38c7d31a
exportDRAWEXE: support Part::Plane and ::Ellipse
2014-09-01 11:09:58 +02:00
Sebastian Hoogen
256d844801
python property Continuity of GeometrySurface
2014-09-01 11:04:38 +02:00
Yorik van Havre
f647f25490
Arch: optimizations in IFC import + furniture objects can be included in spaces
2014-08-31 23:30:02 -03:00
Yorik van Havre
850d0b5e82
Added Gui.showDownloads() py function to show the download manager, and allow to click https links in webgui browser
2014-08-31 16:51:51 -03:00
Yorik van Havre
c60d39c4e7
Arch: fixed import IFC again (better this time)
2014-08-31 15:03:58 -03:00
Jose Luis Cercos-Pita
ed0c6ebd7d
Plot: Fixed PyQt imported in the resources loading
2014-08-31 18:37:26 +02:00
Yorik van Havre
dddc278cc5
Arch: fixed bug in importIFC
2014-08-31 13:29:15 -03:00
wmayer
f2319de49d
+ do not abort if user.cfg or system.cfg is empty
2014-08-31 16:10:45 +02:00
wmayer
ce528d1c4a
+ fixes #0001719 : Show current shortcuts (S) in menus and hover text.
2014-08-31 14:28:33 +02:00
Yorik van Havre
80e80fef83
Arch: allow for equipment objects to be part shapes
2014-08-30 19:17:30 -03:00
wmayer
7c89591ff6
+ allow to load PartDesign even if PySide is not found, suppress MinGW warnings
2014-08-30 23:26:29 +02:00
Yorik van Havre
cef2c1bc8c
Arch: Added Equipment tool
...
The purpose of this tool is to handle standalone objects such as
furniture or sanitary equipment in a building. It is mesh-based,
and accepts either a mesh or a part shape as its base object.
2014-08-29 19:16:28 -03:00
Yorik van Havre
67b54f8052
Draft: clones now correctly adopt the diffuse color of their base object - fixes #1704
2014-08-28 16:30:34 -03:00
Yorik van Havre
6ff67ee5c3
Draft: grid size is now settable in preferences
2014-08-28 16:00:08 -03:00
Yorik van Havre
16ede0e55c
Draft: fixes in DXF exporter - fixes #1590 , #1653
...
* Fixed arc directions
* Turned max spline segment length preference option into a float
* Fixed ellipses export
2014-08-28 13:32:45 -03:00
wmayer
a1fab61ed6
+ minor fix of output format
2014-08-28 15:47:09 +02:00
wmayer
89d07313a5
+ do not try to use framebuffer objects when it's not supported on the system
2014-08-28 15:35:17 +02:00
wmayer
5c269996b8
+ restore lost changes, improve whitspaces, suppress useless MSVC warnings
2014-08-28 12:37:42 +02:00
wmayer
90e3b58950
+ set pcl components for LibPacks
2014-08-28 10:41:59 +02:00
wmayer
fd821fb7b4
+ do pcl components checks
2014-08-28 01:51:58 +02:00
wmayer
a579bdce72
+ fix for pcl 1.6
2014-08-28 00:02:58 +02:00
jriegel
eb734eb6f4
Merge remote-tracking branch 'refs/remotes/origin/jriegel/NewWinBuild' into jriegel/review-NewLibPack
2014-08-27 22:25:35 +02:00
jriegel
f260a0f219
fix Win64 bug in FileInfo
2014-08-27 22:22:29 +02:00
jriegel
889e7bbdce
Merge remote-tracking branch 'refs/remotes/origin/jriegel/NewWinBuild' into jriegel/Rift
2014-08-27 17:48:59 +02:00
jriegel
e2b93c4c80
Merge remote-tracking branch 'refs/remotes/origin/jriegel/NewWinBuild' into jriegel/review-NewLibPack
2014-08-27 16:43:48 +02:00
jriegel
5bdfe81488
Destinquish old and new OpenCV
2014-08-27 16:42:50 +02:00
jriegel
c1f0f70b88
Merge remote-tracking branch 'refs/remotes/origin/jriegel/NewWinBuild' into jriegel/review-NewLibPack
...
Conflicts:
src/3rdParty/salomesmesh/CMakeLists.txt
2014-08-27 15:39:00 +02:00
wmayer
346e5c6a77
+ fix more compiler warnings
2014-08-27 13:26:44 +02:00
wmayer
cc775f9254
+ fix -Wnull-conversion, -Woverloaded-virtual, -Wlogical-not-parentheses, -Wsometimes-uninitialized
2014-08-26 19:14:13 +02:00
Simon Pasquet
55cf9ddeaa
Customized keyboard shortcuts now accept up to 4 keys
2014-08-26 10:31:54 -03:00
wmayer
d974d6897b
+ fixes #0001713 : Allow Part.Arc to be used as Sketcher geometry
2014-08-26 13:09:37 +02:00
jriegel
58a7be992b
Intergrate Werners PCL Triangulation patch and upgrade it to PCL 1.7
2014-08-26 10:28:37 +02:00
jriegel
7183cda616
Merge remote-tracking branch 'refs/remotes/origin/wmayer/pcl-testing' into jriegel/NewWinBuild
...
Conflicts:
src/Mod/Points/App/CMakeLists.txt
src/Mod/ReverseEngineering/App/AppReverseEngineeringPy.cpp
2014-08-26 08:42:47 +02:00
jriegel
e4383e8f24
Test import for Ply via PCL in Points
2014-08-25 23:27:17 +02:00
jriegel
4d19ec20fb
Add OpenCV again and test command
2014-08-25 23:16:54 +02:00
jriegel
e16f8a5b45
Add switch for compile with and without PCL
2014-08-25 23:16:34 +02:00
wmayer
97514d1806
+ fix for word size of OS
2014-08-25 15:25:09 +02:00
wmayer
f28f83bf91
+ Show word size info of OS
2014-08-25 11:41:13 +02:00
Itai Nahshon
e9ea1e2727
Fix automatic creation of tangent constriants.
...
a. Use scale to calculate max distance
b. Consider only circle/arc that actually touch the newly created line
c. Use of arc angles correctly
d. Find nearest touch point (not nearest center)
e. some optimization
2014-08-24 19:07:31 +02:00
Itai Nahshon
6eeaae57b8
Sketcher: Ignore small mouse moves after selection.
...
Switch to drag mode only after cursor moved 3 pixels.
2014-08-24 19:07:16 +02:00
wmayer
3c8a00dfec
+ fixes #0001703 : Spreadsheet PropertyController
2014-08-23 14:38:30 +02:00
Ian Rees
0eec1d8e49
Updated CxImage README
2014-08-22 21:37:20 +02:00
wmayer
1f2cd53bf7
+ fix localization problems in PropertyConstraintListItem, + improve whitespaces
2014-08-22 21:32:19 +02:00
Ian Rees
539e2d2f33
Added a quick README to src/3rdParty/CxImage
2014-08-22 15:51:58 +12:00
wmayer
763eb132cf
+ respect placement in VRML and Inventor objects
2014-08-21 21:46:03 +02:00
jriegel
492a39c19a
simplify Mefisto project without Fortran part...
2014-08-21 18:34:21 +02:00
jriegel
1aed444318
define for PCL usage for older LibPacks
2014-08-21 18:17:20 +02:00
wmayer
833bd4e77b
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-08-21 18:16:42 +02:00
wmayer
c1c25f1a5c
+ add GL test stuff into Sandbox module
2014-08-21 18:15:43 +02:00
jriegel
d65a4e4ed7
some type clearification
2014-08-21 17:59:33 +02:00
Yorik van Havre
317206ac59
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-08-21 12:38:18 -03:00
wmayer
811fb3be24
+ port RegExp utility to Qt4
2014-08-21 17:32:30 +02:00
wmayer
1b4fb56cdc
+ fix DrawingView::onRelabel() to accept any page names
2014-08-21 17:26:52 +02:00
Yorik van Havre
806c857c6f
Draft: removed unnecessary latin1 decode operations
2014-08-21 11:44:28 -03:00
Abdullah Tahiri
7cc5167623
Sketcher properties feature enhancement: Separated sublist for unnamed datum constraints
2014-08-21 14:11:51 +02:00
wmayer
e814d997e5
+ fix trim mesh with plane
2014-08-21 13:26:35 +02:00
wmayer
d0a200303b
+ suppress annoying warnings with MSVC for SMESH sources
2014-08-20 15:31:33 +02:00
Michael G. Hansen
9419259ff6
1659: 3dconnexion space navigator moves view even when FreeCAD is not the active application
...
Check whether the freecad window is active before relaying the space navigator events.
2014-08-19 15:46:52 +02:00
Michael G. Hansen
808d2e93bf
Fix typo.
2014-08-19 15:26:58 +02:00
Michael G. Hansen
dd7bd833c6
Fix bug 1643: Projections are always added to the first drawing page
2014-08-19 15:07:02 +02:00
wmayer
e9100c7ddb
+ fix build failure on Windows, remove unused headers, whitespace improvements
2014-08-19 14:02:16 +02:00
Abdullah Tahiri
a9fef8412f
New feature: Edit Sketch datum constraints from data Property view
...
This feature shows in the data properties associated to a TreeView element,
the datum constraints, i.e. those with an associated value.
2014-08-19 13:23:15 +02:00
jriegel
0e53a593db
cleaning up CMake file and some comments
2014-08-18 22:42:23 +02:00
jriegel
b253a14818
move MEFISTO to inline c file instead of fortran...
2014-08-18 22:32:10 +02:00
Sebastian Hoogen
e2f54c793c
improvements to exportDRAWEXE
...
load only MODELING module instead of ALL
show TypeId of unsupported Objects
use angel of revolution for cones
improve sweep output
support for point, vertex, Part and Draft Polygon
cache object names to reuse them in DRAWEXE
do not expode spine which are allready edges
don't try to make faces from arcs (if this failed in FreeCAD allready)
use rounded floats if they safe digits
Sometimes the floats seems to be rounded to twelve decimal
places. we round them if it allows so safe digigts.
round angles
2014-08-18 14:45:42 -03:00
Sebastian Hoogen
3c7c04cafe
bugfix in Draft.ViewProiderPoint
...
remove access to nonexistant property
2014-08-18 14:45:42 -03:00
Sebastian Hoogen
5ecf0cb40b
Reverse the projection direction of DXF exports
2014-08-18 14:45:42 -03:00
wmayer
7110c55c33
+ fixes #0001689 : Show name of the drawing page in the tab of the drawing
2014-08-18 14:44:28 +02:00
wmayer
8943ef58b2
+ fixes #0001696 : Quantity.getValueAs('rad') touches the Property
2014-08-18 13:30:14 +02:00
Sebastian Hoogen
3198c42397
flush stdout after reseting the console color
2014-08-18 13:11:16 +02:00
wmayer
967566acf1
+ improve OCC version macro, fix build failure with MinGW, fix build failure with Coin2
2014-08-18 11:34:02 +02:00
Yorik van Havre
5e82febd0a
Enhanced a bit the document icon in tree view
2014-08-17 18:49:49 -03:00
Yorik van Havre
14292c11cd
Draft: Objects drawn on an existing face will no longer take it as support unless the face was already selected
2014-08-17 18:09:44 -03:00
jriegel
ee64f54765
OCL tests
2014-08-17 20:15:12 +02:00
wmayer
75fa3d4067
+ prepare property editor for items with unknown number of children
2014-08-17 18:36:27 +02:00
Yorik van Havre
f0eee59283
Draft: Fixed small regression in Draft2Sketch
2014-08-16 19:40:35 -03:00
Bernd Hahnebach
6436b29034
Arch: fix in new ifc-importer
2014-08-16 12:37:06 -03:00
wmayer
6556bc776a
+ fixes #0001689 : Show name of the drawing page in the tab of the drawing
2014-08-16 15:08:55 +02:00
wmayer
8808b82371
+ fixes #0001690 : sketch.getPoint crashes FreeCAD if the point does not exist
2014-08-16 14:41:30 +02:00
wmayer
92cb03bca1
+ code cleanup
2014-08-16 14:15:46 +02:00
Yorik van Havre
b33d8f6244
Draft - Allow to export Drawing pages to DXF - fixes #1686
...
* Uses DXF algos of the Drawing module instead of the Draft dxf library
* Uses a DXF template with the same name as the SVG template, if existing
* Only Draft, Arch, Part and Annotation views are currently supported
* Drawing module's projectToDXF() now returns only a fragment instead of a full DXF file
2014-08-15 18:14:17 -03:00
wmayer
4dc12740e8
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-08-15 14:37:25 +02:00
Sebastian Hoogen
4ba56b5c29
fixes #0001684 : Sweep ignores the list of subshapes
2014-08-15 14:35:59 +02:00
Yorik van Havre
7665e34a3a
Draft: Fixed wrong preferences text
2014-08-14 19:51:31 -03:00
Johannes Reinhardt
941f7dae00
Use new curve discretization
2014-08-14 23:28:50 +02:00
Johannes Reinhardt
8189dddec1
Revert "Arch: Turned jreinhardt's fix to webGL into an option"
...
This reverts commit 90f2fc2034
2014-08-14 23:28:50 +02:00
wmayer
7eaa4fff74
+ Support Quasi methods in discretize()
2014-08-14 19:11:51 +02:00
Yorik van Havre
7369fbd154
Draft: clearer preference text for dimension style setting
2014-08-14 11:57:17 -03:00
wmayer
ee2e7fc3fa
+ Give example for discretize() matching the shape type
2014-08-14 11:38:39 +02:00
wmayer
9ed61f107b
+ support First and Last keywords in discretize
2014-08-14 11:16:54 +02:00
jriegel
976511154c
Remove all hardcoded INT types out of PyCXX to make X64 warning free
2014-08-14 09:13:53 +02:00
wmayer
3d2a2b06f0
+ fix and improve discretize() method
2014-08-13 23:33:27 +02:00
Yorik van Havre
d0288deabb
Arch: small bugfixes in Drawing projection stuff
2014-08-13 16:21:08 -03:00
jriegel
551a095176
comenting out use of Qt internal API only on Windows
2014-08-13 21:05:13 +02:00
jriegel
95923c3afc
remove Standard_String.hxx, no longer needed
2014-08-13 21:04:27 +02:00
jriegel
7767f0e6c7
Fix for VC11, should be backwards compatible
2014-08-13 21:01:27 +02:00
jriegel
4f5e1e3b8b
fix using Release lib in Debug
2014-08-13 21:00:50 +02:00
jriegel
6303650cc1
Use default eigen in Approximation...
2014-08-13 21:00:15 +02:00
jriegel
b5431d57e0
Change std::make_pairs to C++11 standard without template arguments
2014-08-13 20:59:29 +02:00
wmayer
fedbd2fc2e
+ Check for valid document in link properties
2014-08-13 17:47:50 +02:00
wmayer
ed4f7dcd35
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-08-13 12:49:37 +02:00
wmayer
7939027c98
+ fixes #0001682 : Crash after updating editable texts in drawing
2014-08-13 12:49:09 +02:00
Yorik van Havre
a9b5970512
Arch: Misc improvements to section planes
2014-08-13 00:28:27 -03:00
Sebastian Hoogen
92382edbc9
bugfixes and feature enhancements in exportDRAWEXE
...
bugfix to Loft in exportDRAWEXE
added Extrusion
ability to clean shapes from teselation before export
support for Fillet in exportDRAWEXE
name shapes with restore command
remove trailing dot from decimals
include version information in output
allow to test if a suboject is supported
explode sections of loft and sweep and edges for fillet
2014-08-12 18:17:07 +02:00
Sebastian Hoogen
1f162dec2d
link against TKAdvTools only if OCCT < 6.7.3
2014-08-12 08:10:54 +02:00
wmayer
fcb2714d0d
+ on document load set camera setting of the MDI views
2014-08-12 00:07:16 +02:00
wmayer
4ad43e60b0
+ fixes #0001667 : 'Save file' disabled when viewing a drawing
2014-08-11 22:59:16 +02:00
wmayer
29f3f0cfc2
+ do not apply corrupted transformation (NaN) from SoCenterballManip
2014-08-11 14:56:30 +02:00
wmayer
b8df4593c9
+ change selectNumber() to check against the locale signs
2014-08-11 11:07:24 +02:00
wmayer
17e2737062
+ fix regression in selectNumber(), + little performance boost, fix whitespaces
2014-08-11 10:46:43 +02:00
jriegel
915ea8a609
New parser c-files
2014-08-10 19:17:40 +02:00
jriegel
1b4190b047
Merge branch 'refs/heads/negative_sign_problem-2'
2014-08-10 19:12:39 +02:00
jriegel
601d7f3c03
remove double parameter functions from quantity parser
2014-08-10 19:10:14 +02:00
Yorik van Havre
a05bf739c5
Draft: Fixed Offset tool - fixes #1634 , #1635
2014-08-09 13:41:52 -03:00
Ian Rees
3a96bb60fe
Sketcher: Don't change preselection during box selection
2014-08-09 07:34:04 +02:00
Yorik van Havre
3f236d042a
Arch: minor bugfixes
2014-08-08 19:07:26 -03:00
Yorik van Havre
8a24f0fe6f
Draft: Setting the WorkingPlane from a quad face now also takes its x and y directions
2014-08-08 13:48:30 -03:00
Abdullah Tahiri
37d5012647
Sketcher Elements widget - New feature -
...
- Remembers how the user left the "Auto switch to Edge" and the "Extended Name" checkboxes
and restores the values on next use of the Sketcher WB.
2014-08-08 18:32:54 +02:00
Yorik van Havre
b64f283ce8
Draft: Removed leftovers from the macros menu
2014-08-08 11:21:37 -03:00
wmayer
854596aaa0
minor fixes in gear panel
2014-08-08 13:21:06 +02:00
Aglef Kaiser
420e71afbb
Involute gear script extended for internal gears
2014-08-08 12:10:38 +02:00
Yorik van Havre
6b5b1a7443
Raytracing: Using names instead of labels in exported files - fixes #1663
2014-08-07 22:24:57 -03:00
Yorik van Havre
7778988faa
Drawing: Allow to select the page in which to create a view feature - fixes #1668
2014-08-07 22:00:31 -03:00
wmayer
28490532f5
+ fix dir2qrc script to keep alphabetical order of file names, update Sketcher.qrc
2014-08-07 20:29:31 +02:00
Abdullah Tahiri
e2db94facd
updated icons for sketcher
...
- Selection icons added.
- Art by Jim
- Clean up sketcher xpm small icons: Only constraint icons seem to be necessary
2014-08-07 19:49:51 +02:00
Abdullah Tahiri
b5002dc6fe
changes in sketcher
...
- Varios minor bug fixes.
- Added the other commands to the toolbar.
- Bug fix: missing AbortCommand().
- Mode Auto-switch to edge (Sponssi mode) has selection combo disabled to avoid interferring with this mode.
However, if auto-switch checkbox is unchecked (Jim-Abdullah mode), the combo is enabled and selection of
element type can be effected via the combo with the mouse.
In any case "z" shortcut iterates round robin the "valid types" of the preselected (hovered) element.
2014-08-07 19:49:51 +02:00
wmayer
09b8b25144
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-08-07 19:47:11 +02:00
wmayer
1cd2dab81f
+ rename duplicate class name
2014-08-07 18:41:54 +02:00
Yorik van Havre
3c0c72e4c0
Draft: removed macros menu - fixes #490
...
The macros menu code is on http://www.freecadweb.org/wiki/index.php?title=Macro_MacroMenu
2014-08-07 11:07:22 -03:00
Yorik van Havre
dc3ebfb502
Fix in Drawing page object - fixes #1540
...
* Changing the editable texts updates the page automatically
* Added a doc.recompute() after creating a new page
2014-08-07 10:39:33 -03:00
Yorik van Havre
e0bdc07c4d
Fixed output of ViewObject attribute in console mode
2014-08-07 10:38:41 -03:00
Yorik van Havre
c66de2f8cb
Draft: fix in SelectGroup tool - fixes #1568
2014-08-06 19:55:26 -03:00
Yorik van Havre
dbed1e35e5
Draft: small fix in Array object
2014-08-06 19:33:55 -03:00
wmayer
bd64ce3bb7
+ implement save() function in PointKernel, fix icon issue in mesh workbench
2014-08-06 17:39:15 +02:00
wmayer
0c2d201396
+ fix security issue (do not run uncontrolled format string)
2014-08-06 10:16:06 +02:00
Yorik van Havre
46583f2960
Used Gui.addModule() instead of import in Draft & Arch
2014-08-05 19:38:40 -03:00
Yorik van Havre
81e983b6ac
Exposed doCommand (Gui version) to python - fixes #1564
2014-08-05 19:28:36 -03:00
Yorik van Havre
6dd35078a2
Draft: issue message if an object cannot be moved or rotated - fixes #1642
2014-08-05 18:28:26 -03:00
Yorik van Havre
234af5b27f
Arch: improvements in Space object
...
* Better text control
* Text position editable with Draft Edit
* Additional properties such as finish types
2014-08-05 16:19:39 -03:00
wmayer
be3299a46d
code review: move transaction to outside from loop, fix several bugs, fix whitespaces
2014-08-05 00:35:03 +02:00
wmayer
1011dd4175
Squashed commit of the following:
...
commit 695becbbfff961b13e3edb5a4e1e4487bc53b4bb
Author: Abdullah Tahiri <abdullah.tahiri.yo@gmail.com>
Date: Mon Aug 4 15:24:33 2014 +0200
- Making combo disable state.
- Updating Art (Thanks Jim!)
commit d5391d40ace450fa2e65fe2b4ab8029ad37cacf8
Author: Abdullah Tahiri <abdullah.tahiri.yo@gmail.com>
Date: Fri Aug 1 00:40:15 2014 +0200
- Adaptation of code to Workbench's new Template structure.
- Minor adaptation of new ViewProvideSketch code to new constraint code (only in code extensions needed for element Widget)
commit ecdec20afa33c9a950e6054e80e4aa9c72aad8b6
Author: Abdullah Tahiri <abdullah.tahiri.yo@gmail.com>
Date: Thu Jul 31 15:31:38 2014 +0200
Fix so that when applying a coincident constraint to a plurality of points,
if one constraint on a couple of points exists, no new coincident constraint is
added to this couple.
Fixes: http://forum.freecadweb.org/viewtopic.php?f=3&t=6890
commit 32ef59d76e6c63356f5d36598ca11eb47c2e52af
Author: Abdullah Tahiri <abdullah.tahiri.yo@gmail.com>
Date: Thu Jul 31 14:13:58 2014 +0200
Add some placeholder art for icons to avoid having a cross icon and annoying icon not found messages.
commit ccb60a3a7e71a0eb8ad5d896542314a98ef314a8
Author: Abdullah Tahiri <abdullah.tahiri.yo@gmail.com>
Date: Mon Jul 28 20:15:29 2014 +0200
- Fixed Length Constraint accelerator (D) to SHIFT+D to avoid colision with other higher level FreeCAD accelerator assignment.
- Selection Accelerators now toggle on shortcut execution, and act when no other element is selected (fixed bug)
TODO: Art+Toolbar
commit 791358d046e8eeb03fa00272f5627c75254c48eb
Author: Abdullah Tahiri <abdullah.tahiri.yo@gmail.com>
Date: Mon Jul 28 15:12:07 2014 +0200
Fixing shortcut system:
- Take shortcuts automatically from CommandManager.
- Fixed two shortcuts in CommandConstraints (Point on Object - O and
Parallel Constraint - P to SHIFT+O and SHIFT+P to avoid collision with other constraints)
- Fixed shortcuts in CommandConstraintAccel to non-already-existing combinations
- Fixed Sketcher Menu to show accelerators
commit 12d366406a45038ce1a4f725a98e4f570475084b
Author: Abdullah Tahiri <abdullah.tahiri.yo@gmail.com>
Date: Mon Jul 28 11:53:37 2014 +0200
Implemented SHIFT multiple selection functionality in listwidget.
commit 0606ea7dfe38fdf8924f65f14382f1b327145c80
Author: Abdullah Tahiri <abdullah.tahiri.yo@gmail.com>
Date: Mon Jul 28 11:02:02 2014 +0200
Added Sketcher Accelerators for:
- Selection of H Axis
- V Axis
- Origin
Main TODO: Shortcuts and Shift in list widget implementation
commit 297464807fc56fbcf31efadff9625fc05bb20c41
Author: Abdullah Tahiri <abdullah.tahiri.yo@gmail.com>
Date: Wed Jul 23 11:37:21 2014 +0200
Implementation of:
- Switch on 'Z' instead of 'Shift'
- Checkbox to select whether element internal name (e.g. Edge10) should be presented on list or not (Sponssi requested)
- Checkbox to force going back to "Edge" type on change from one element to the next (Sponssi requested)
commit c8764b116acdcfdc7ef7658dc6009fb8db807906
Author: Abdullah Tahiri <abdullah.tahiri.yo@gmail.com>
Date: Wed Jul 23 07:57:11 2014 +0200
TaskSketcher Elements:
- Store Vertex within elements for optimization (reduce loops searching for vertex in every function call)
- Added the accelerators described below + Toggle Construction as context menu commands
- Fixed bug (Thanks sponssi!): After some element has been preselected from the list and the cursor moved to the drawing area,
the preselection doesn't seem to be resetted in the widget or whereever it is handled.
Tapping shift still swaps the preselection between the points of the previously selected element.
The left mouse button has to be clicked in the draw area to get rid of this.
http://forum.freecadweb.org/viewtopic.php?f=10&t=6861&sid=7eea4adc7ecf4cebd561b357601866a2&start=20
- Extended naming of elements, to facilitate writing python code (as requested by sponssi).
- Minor modifications (creation of utility fuctions, code readibility, ...)
Sketcher Workbench:
- First effort to add a toolbar with the accelerators.
Sketcher Accelerators: (Perform actions on existing elements, as opposed to Geometry Creation, not restricted to applying constraints)
- Close Shape : of selected edges (i.e. lines and arcs)
- Connect : selected edges (connect endpoint edge with starting point of next edge according to selection order)
- Select Constraints : associated with currently selected edges
commit 1dc18204a4e2e38f71d729a7692383f50a7d4654
Author: Abdullah Tahiri <abdullah.tahiri.yo@gmail.com>
Date: Sat Jul 12 16:06:48 2014 +0200
New alternative implementation of the Sketch Element List.
This version comprises:
- Identification via icon of type of geometric element (Point, Arc, Line, Circle) and
Type of selection (Edge, Starting Point, End Point, Center Point)
- Corrected a bug where upon selection from the combobox, the icons were not updated (Thanks Jim!)
- Implementation of jump to next valid type of last preselected element (aka fast-forward) for all the types.
commit 4d472ef796362405c3982355f86489fa92cbfe6d
Author: Abdullah Tahiri <abdullah.tahiri.yo@gmail.com>
Date: Thu Jun 26 17:15:51 2014 +0200
Feature request by jmaustpc
- When an object does not have an element, lets put a different icon.
- Currently the constraint lock icon is used until availability of a new one.
commit 6d15478f6533ff3805520a8ca36d1c41908cb0af
Author: Abdullah Tahiri <abdullah.tahiri.yo@gmail.com>
Date: Thu Jun 26 14:54:23 2014 +0200
Bug fix (preselection not disappearing on changing element without the element Type).
commit e33043e17781fcf6399257696f115f68ab4580ec
Author: Abdullah Tahiri <abdullah.tahiri.yo@gmail.com>
Date: Thu Jun 26 14:39:20 2014 +0200
New nicer icons by jmaustpc. They look much nicer :-)
commit 2ce2d6ff1ad2d81b0b1e30ffcbe9f2cc445f2e5b
Author: Abdullah Tahiri <abdullah.tahiri.yo@gmail.com>
Date: Thu Jun 26 14:37:21 2014 +0200
Fast-Forward functionality:
- If an element not having "midpoint" is preselected, then on pressing SHIFT the
Type will jump from EndPoint to Line skipping midpoint.
- This is intended as a productivity feature, as most sketch elements usually are lines
commit 1865d06d06582a49da10ddc123133807a4593060
Author: Abdullah Tahiri <abdullah.tahiri.yo@gmail.com>
Date: Wed Jun 25 15:47:22 2014 +0200
Bug fix (thanks jmaustpc)
- Preselection is maintained even though the geometric element does not have the "Type".
- Fix involves calling for remove preselection in TaskSketcherElement
- Implementing the response to the message RmvPreselection in ViewProviderSketch
commit 14e21da4b4ed0e9a2b3e846a4e51f6745d5e0ab7
Author: Abdullah Tahiri <abdullah.tahiri.yo@gmail.com>
Date: Mon Jun 23 14:25:35 2014 +0200
Fix Bug with null pointer (thanks jmaustpc!)
Clean up code
commit 0d99eb633f1bca45d4e7bb22c57bd4892767a390
Author: Abdullah Tahiri <abdullah.tahiri.yo@gmail.com>
Date: Wed Jun 11 16:32:48 2014 +0200
New widget for the Taskbar of the Sketcher WB.
The objectives of this widget are:
1. Allow editing of sketches when they have (partially) overlapping lines of any type
(construction/external/normal).
2. Allow the construction of sketches using the keyboard (less mouse intensive)
The widget works as follows:
1. A QListWidget presents a list of elements, element is here a geometric element
formed Types edges, starting points, end points and midpoints (e.g. circles, arcs)
2. On hovering/Entering one item in the list, it is preselected for easy identification.
3. The selection can be switched from one type to another using the SHIFT key
(press and release) in a round-robin fashion (or you can select it using the droplist)
4. Selection of different types is possible (e.g. two points and a line).
5. The contextual menu accessible by right click allow to apply a constraint to the
selection.
6. The constraints in the contextual menu have shortcuts, so you can actually use the
shortcut directly from the QListWidget.
Additional features introduced to other parts during development...
- New color introduced for Types that are selected and preselected at the same time
- Edges is a SoLineSet. You can not apply many So modifiers (width,offset) to parts of a SoLineSet.
An edge part of a SoLineSet that is drawn after another one, covers it unless it is closer to the
camera. The system of manual offsets already in place for points has been extended to properly
handle (i.e. show) overlapping lines part of a SoLineSet.
2014-08-05 00:35:02 +02:00
Yorik van Havre
62e9b60816
Added a couple of missing units in MKS schema
2014-08-04 19:16:10 -03:00
Yorik van Havre
f5f6cb1adf
Arch: Enhanced Space tool - fixes #1610
2014-08-04 18:24:20 -03:00
Yorik van Havre
a7d1b80fc3
Draft: Fixed offset in SelectPlane tool - fixes #1606
2014-08-04 13:53:38 -03:00
Yorik van Havre
a601434c27
Draft: adapted Draft2Sketch tool for macro recording - fixes #1661
2014-08-04 12:37:59 -03:00
Yorik van Havre
e41996c9db
Draft: default Z to 1 in Scale tool - fixes #1660
2014-08-04 12:01:44 -03:00
Yorik van Havre
caf02318b5
Arch: Included some utility functions into Arch module
...
* makeCompoundFromSelected: creates a compound object from selected subobjects
* cleanArchSplitter: cleans the splitters on imported Arch objects
* rebuildArchShape: tries to rebuild a solid from the faces of an invalid shape
2014-08-04 11:11:11 -03:00
jriegel
36a0641edd
App and Base Compiles with new LibPack
2014-08-03 22:56:52 +02:00
Johan K
83a5f1547f
Adding selectNumber handling of locale, this wont work with groupseparators
2014-08-03 22:31:57 +02:00
jriegel
ec2198107b
move build specifier in own cMake group
2014-08-03 20:53:19 +02:00
Yorik van Havre
c7bfaf2ed7
Arch: small bugfixes and optimisations
2014-08-03 15:14:33 -03:00
Johan K
5cfdabb45a
Adding changes
2014-08-03 20:13:05 +02:00
jriegel
b32b227733
clean up number scanner in Units
2014-08-03 17:24:42 +02:00
jriegel
1da5543657
fix swedish minus simbol
2014-08-03 16:01:21 +02:00
wmayer
ced08b0416
+ fix memory leak
2014-08-02 18:26:23 +02:00
wmayer
578fbbefa4
+ fix bug when releasing button after dragging point or curve
2014-08-02 17:52:12 +02:00
Ian Rees
c836dab53d
Removed some debugging stuff that was accidentally pushed earlier
2014-08-02 20:04:56 +12:00
Yorik van Havre
2d8963de03
Arch: Added scaling in IFC importer
2014-08-01 21:44:46 -03:00
Yorik van Havre
a548203ca9
Arch: removed obsolete IFC preference options
2014-08-01 21:34:49 -03:00
Yorik van Havre
3b86494afb
Arch: fixed bug in wall extrusions
2014-08-01 21:28:32 -03:00
Yorik van Havre
bf101bbfcb
Draft: Array objects now have an IntervalAxis property to build helicoidal compounds
2014-08-01 20:57:53 -03:00
Yorik van Havre
fec636b835
Arch: Introduced new IFC importer/exporter
...
* The new IFC importer uses excusively the newest ifcopenshell.py module
* Renamed old importer to importIFClegacy.py
* Included the now deprecated ifcReader and ifcWriter modules into importIFClegacy
* The new IFC importer falls back on the older one if the ifcopenshell module is not found
2014-08-01 18:39:10 -03:00
wmayer
7a3ddd5bae
+ fix author note, fix various crashes, improve mesh selection stuff
2014-08-01 16:39:59 +02:00
wmayer
4032a88c2d
Revert "remove TKAdvTools"
...
This reverts commit 6843d6ad5d
2014-08-01 15:07:27 +02:00
Yorik van Havre
f0d5564747
Draft: DXF lib is now pulled from its specific branch
2014-07-31 11:26:17 -03:00
wmayer
406d32aebb
+ Replace InputField with QuantitySpinBox
2014-07-31 15:14:27 +02:00
wmayer
609422f08a
More detailed error message when xerces fails to read in parameters
2014-07-31 10:58:48 +02:00
Yorik van Havre
d946499e4d
Draft: diverted current dxfLibrary download folder
2014-07-30 23:54:14 -03:00
wmayer
e327662d28
0001638: Not possible to draw anything.
2014-07-30 18:21:53 +02:00
wmayer
7294271c0c
+ Allow to get clean copy of a shape from Python
2014-07-30 12:21:22 +02:00
wmayer
a252471625
+ fix author notes, fix memory leak, fix build failure under Windows
2014-07-30 10:05:13 +02:00
wmayer
6ca580456b
Squashed commit of the following:
...
commit 8853bf442b6e1a98699fa90fca5eb30b3f6d3a5e
Author: Ian Rees <ian.rees@gmail.com>
Date: Tue Jul 29 15:46:59 2014 +1200
Refactoring and small fix in constraint icon bounding boxes
commit c03e4c13d8fd657e18e3c78d16bbdef209f8c779
Author: Ian Rees <ian.rees@gmail.com>
Date: Mon Jul 28 15:41:15 2014 +1200
Implemented picking of individual constraints from combined icons
commit 254aaab450fe6646bee7542c532c454af91b6597
Author: Ian Rees <ian.rees@gmail.com>
Date: Mon Jul 28 13:04:18 2014 +1200
Added bounding boxes for combined constraint icons
commit 4f0738ec30220fbf1abdea14dd121d0a134e5dfd
Author: Ian Rees <ian.rees@gmail.com>
Date: Sat Jul 26 18:53:33 2014 +1200
Added screenCoordsOfPath() to View3DInventorViewer
commit 14e2dc7b4aa79db97cbacd2c848728a66276d644
Author: Ian Rees <ian.rees@gmail.com>
Date: Sun Jul 20 14:24:27 2014 +1200
Bit of code to make constraint icon text rendering nicer.
This won't be useful unless the font changes, but wanted to add it while
I was thinking about it.
commit 8020d2d62214d71875cbae101d5ac5e96d998201
Author: Ian Rees <ian.rees@gmail.com>
Date: Sun Jul 20 13:54:51 2014 +1200
Fixed an off-by-one in ViewProviderSketch::combineConstratintIcons
Bug resulted in icons occasionally not being combined into groups,
when they should've been.
commit 20d92a3ccc1f795be1cb86f6f92045518dc8eb81
Author: Ian Rees <ian.rees@gmail.com>
Date: Tue Jul 15 19:38:20 2014 +1200
Fixed a bug that was introduced two commits ago.
commit 69e1ea848e3bc3c8c372c539f30a7b4d2a563aa2
Author: Ian Rees <ian.rees@gmail.com>
Date: Tue Jul 15 15:33:30 2014 +1200
Fixed dumb copy-and-paste error
commit a998b75a905cc31e1f4f49869e81ecaef5858b69
Author: Ian Rees <ian.rees@gmail.com>
Date: Sun Jul 13 18:39:22 2014 +1200
Fixed crash reported by sponssi
More info at http://forum.freecadweb.org/viewtopic.php?f=10&t=6965&p=56590
commit 27b7b804790dda5164c7ef0b9418f6c160228859
Author: Ian Rees <ian.rees@gmail.com>
Date: Thu Jul 10 13:32:16 2014 +1200
Cleaning up my git repo for FreeCAD.
This branch now has just the Sketcher icon fixes, plus a few random comment edits.
2014-07-30 10:05:12 +02:00
Yorik van Havre
b74c96dcc4
Draft + Arch: fixes when working without the GUI
2014-07-29 22:20:06 -03:00
wmayer
580c541005
+ Add class CoordinateSystem and use it to compute placement of plane from fit
2014-07-29 23:01:29 +02:00
wmayer
65c974ed2d
Squashed commit of the following:
...
commit 6e78052d325eadcb212a6d50c6cd09cc29ac7870
Author: Johan K <johankristensen@gmail.com>
Date: Tue Jul 29 14:52:08 2014 +0200
Adding missing file RegularPolygon.py
commit 416396283032a31a1ea307df23d33ecfccf37935
Author: Johan K <johankristensen@gmail.com>
Date: Mon Jul 28 22:51:28 2014 +0200
Replaced sketcher implementation of RegularPolygons with a Python script version.
2014-07-29 17:26:28 +02:00
Ian Rees
c10ddae02f
Bugs in mouse panning when viewport is "portrait" orientation
2014-07-29 12:58:39 +02:00
wmayer
290bc13c74
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-07-29 11:37:32 +02:00
wmayer
c54311123b
+ Add method getEditorMode() to see if a property is hidden or read-only in the property editor
2014-07-29 11:36:42 +02:00
Yorik van Havre
19135f9586
Draft: small bug fix in DXF importer
2014-07-28 19:47:40 -03:00
wmayer
dc7ccc41af
+ remove crude workaround as this seems to work now
2014-07-28 18:43:11 +02:00
wmayer
2e6c54eedf
+ improve the plane fit from REEN module
2014-07-28 16:39:34 +02:00
Ian Rees
1a2fe206ca
Turned off HIDE_UNDOC_RELATIONS in Doxygen
2014-07-28 17:15:55 +12:00
wmayer
a1da4bb4fb
+ fixes #0001619 : Python script generating 3D model works in V0.13, error in V0.14
2014-07-27 14:08:31 +02:00
wmayer
d163316e63
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-07-27 11:00:36 +02:00
Johan K
7fadaa0a55
Added more regular polygons to the sketcher gui
2014-07-27 00:25:40 +02:00
Johan K
4528b31d6e
Added more regular polygons to the sketcher gui
2014-07-27 00:08:49 +02:00
Yorik van Havre
d5469ba3fc
Arch: misc bugfixes
2014-07-26 16:37:06 -03:00
wmayer
6b1e6a66ad
+ Make destructor virtual for classes with virtual methods (based on DevJohan's patch)
2014-07-26 19:17:12 +02:00
wmayer
4dee80f4e1
+ support to create faces from vertices with shape builder
2014-07-25 13:35:10 +02:00
wmayer
f0eb27f710
+ let user decide to use equality constraint or independent radii
2014-07-24 19:09:41 +02:00
wmayer
996af8d808
+ fixes #0001633 : Allow adding radius constraints to several circles at once.
2014-07-24 13:32:47 +02:00
Sebastian Hoogen
65793d22e8
recognize OCCT -dev and -beta versions
...
as such in version string
2014-07-24 10:31:50 +02:00
Sebastian Hoogen
3859963b44
fix to placement problem in exportCSG.py
2014-07-24 10:31:50 +02:00
wmayer
ecbda2772e
+ fixes #0001628 : Fixed A4 Drawing Template
2014-07-23 13:56:16 +02:00
wmayer
841b4fab1b
+ fixes #0001630 : IGES-Export in [mm] turns to [Inches]
2014-07-23 13:49:16 +02:00
wmayer
dfea0206ca
+ fix doc string
2014-07-22 14:49:25 +02:00
wmayer
c693916fb1
+ support units in hole panel
2014-07-22 14:47:37 +02:00
wmayer
cb5e72974c
+ support units in hole panel
2014-07-22 14:47:09 +02:00
wmayer
57cdb8aed5
+ support units in draft panel
2014-07-22 14:44:20 +02:00
wmayer
3585403ee2
+ support units in polar pattern panel
2014-07-22 14:39:23 +02:00
wmayer
67b85ff8c3
+ support units in revolve panel
2014-07-22 14:30:30 +02:00
wmayer
4b644b2821
+ support units in groove panel
2014-07-22 14:23:10 +02:00
wmayer
ea6c5407d9
+ support units in pocket panel
2014-07-22 14:13:45 +02:00
wmayer
a5e27444d0
+ minor issue solved with message label of linear pattern panel
2014-07-22 11:08:43 +02:00
wmayer
107a7f50dc
+ fix bug in chamfer/fillet when aborting command
2014-07-22 11:02:45 +02:00
wmayer
d2cbd6817f
+ fixes 0001563: Add units to Linear Pattern in PartDesign
2014-07-22 10:39:44 +02:00
wmayer
b5b929cf58
+ fix focus issue with QuantitySpinBox and InputField
2014-07-21 18:28:46 +02:00
wmayer
5ba337a36d
+ add QuantitySpinBox to widget plugin
2014-07-21 15:30:38 +02:00
wmayer
2da263ae95
+ proper handling of group separator in InputField and QuantitySpinBox
2014-07-21 15:03:45 +02:00
wmayer
81310c906b
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-07-20 19:15:42 +02:00
wmayer
3fb066c13e
+ add missing headers
2014-07-20 19:15:10 +02:00
Yorik van Havre
a0bb761d8e
Arch: added panel to cmakelist
2014-07-20 13:32:06 -03:00
Yorik van Havre
4414da2256
Arch: Updated preferences page for panels
2014-07-20 13:28:43 -03:00
Yorik van Havre
6c8c69df02
Arch: small fix in panel
2014-07-20 13:19:51 -03:00
Yorik van Havre
14ee127dc7
Arch: Further work on panel
2014-07-20 13:17:36 -03:00
Yorik van Havre
a452e6cf61
Arch: Starting Panel tool
2014-07-20 13:17:36 -03:00
Yorik van Havre
8c7f69d913
Transferred import-export related preference pages to a separate group
2014-07-20 12:58:15 -03:00
wmayer
d403851313
+ add QuantitySpinBox
2014-07-20 17:47:09 +02:00
wmayer
86a69f830e
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-07-20 17:45:54 +02:00
Yorik van Havre
d44e4d324b
Arch: moved ifc-related functions to importIFC
2014-07-20 12:00:47 -03:00
Sebastian Hoogen
f7193ca646
Adapt SMESH to new OCCT NCollection templates
2014-07-19 12:26:29 +02:00
Sebastian Hoogen
6843d6ad5d
remove TKAdvTools
2014-07-19 12:26:29 +02:00
wmayer
4ae0d4db53
+ do not allow negative numbers in fillet and chamfer panel
2014-07-18 15:23:36 +02:00
wmayer
80cc2e4710
+ Replace OCC_HEX_VERSION with OCC_VERSION_HEX
2014-07-18 14:51:54 +02:00
wmayer
c4bd838c55
+ fix broken copyright notice
2014-07-18 12:40:21 +02:00
Ian Rees
22278b7826
This branch adds a mouse cursor to the 'Measure Distance' tool.
2014-07-18 12:33:57 +02:00
Sebastian Hoogen
a0454af685
remove all references to BRepMesh
2014-07-18 10:43:16 +02:00
Yorik van Havre
eea27448e9
Arch: Fixed bugs when working without GUI
2014-07-17 19:58:22 -03:00
wmayer
0fda229597
+ add missing files to install target of Sketcher module
2014-07-17 12:26:52 +02:00
jriegel
f30e86bc4b
Integrating Rift Libs in build
2014-07-16 23:08:32 +02:00
wmayer
c6af002ab5
+ fixes #0001614 : Provide proper Error Message for corrupt xml files
2014-07-16 19:12:19 +02:00
wmayer
a5c8529b53
+ use XMLString::release to free memory
2014-07-16 19:11:17 +02:00
wmayer
b316991220
+ fix mesh trimming
2014-07-16 18:21:30 +02:00
wmayer
7120279ec0
+ fixes #0001617 : typo in importCSG.py
2014-07-16 15:11:45 +02:00
wmayer
f4d8b0ff54
+ fix mesh triming
2014-07-16 13:57:14 +02:00
Yorik van Havre
7f387eabc1
Arch: General improvements
...
* Removed roundings in exported objects
* Added toggleIfcBrepFlag command to force export as BREP
* Prepared Arch objects for Materials and custom IFC attributes
* Supported latest developement version of IfcOpenShell
* Cleanup of IFC exporter
* Export of Arch Sites as IfcSite
* Export of Groups as IfcGroup
2014-07-15 15:13:30 -03:00
wmayer
d456cd21f9
+ fixes #0001499 : Mesh trim loses some triangles
2014-07-15 18:42:42 +02:00
wmayer
b8772df79c
+ Mesh trim loses some triangles
2014-07-15 13:31:15 +02:00
Ian Rees
172fb583d8
Forgot to add this to the last commit...
2014-07-15 11:41:11 +02:00
Ian Rees
d21d3125e7
Have cmake set doxygen to use dot if it's available.
...
Also a minor typos
2014-07-15 11:41:10 +02:00
wmayer
a9d1979270
+ include missing header file
2014-07-15 10:27:02 +02:00
Yorik van Havre
bd6a5cea8d
Bumped version to 0.15 and added a temporary new splash
2014-07-14 20:04:21 -03:00
Yorik van Havre
7a612c66fa
Spreadsheet: Added setitem and getitem methods
2014-07-14 19:13:18 -03:00
wmayer
8aec46fbaf
+ support comparison with double in quantity number protocol
2014-07-14 17:17:41 +02:00
Yorik van Havre
1fd7bd98a4
Draft: Array tool now prints commands in the python console
2014-07-13 12:32:32 -03:00
Sebastian Hoogen
51b3a4c945
importSVG: recognize relative scaling in viewBox attribute
2014-07-13 11:37:36 +02:00
Sebastian Hoogen
7bc3f70b8d
remove unused meshing paramters for exportCSG
...
releated to 382e055e9b
2014-07-13 11:37:35 +02:00
Sebastian Hoogen
c1f5582da8
support for Part::Loft in exportDRAWEXE
2014-07-13 11:37:34 +02:00
Sebastian Hoogen
2b1656e6b0
renable DRAWEXE exporter
...
This reverts commit 4c48bdf216
2014-07-13 11:37:34 +02:00
Michael Ang
db54a748b1
automatically find the OpenSCAD binary on Mac OS X
2014-07-13 11:37:33 +02:00
wmayer
af4aa69d35
+ fix crash when trying to edit broken revolve object
2014-07-13 11:34:36 +02:00
Jose Luis Cercos-Pita
c90c4e1749
Added spreadsheets to the hydrostatics tool
2014-07-13 11:09:00 +02:00
Jose Luis Cercos-Pita
5f49a00b01
Fixed worng variable
2014-07-13 11:09:00 +02:00
Jose Luis Cercos-Pita
e1b387a104
Changed the spreadsheet label
2014-07-13 11:08:59 +02:00
Jose Luis Cercos-Pita
48afaa5750
Added spreadsheets to the transversal areas tool
2014-07-13 11:08:58 +02:00
Jose Luis Cercos-Pita
3194d478f3
Fixed box generation for small draft values
2014-07-13 11:08:58 +02:00
Jose Luis Cercos-Pita
aa1c957eb9
Fixed bad integer usage
2014-07-13 11:08:57 +02:00
Jose Luis Cercos-Pita
cf01937d1c
Added units mangement to the hydrostatics tool
2014-07-13 11:08:56 +02:00
Jose Luis Cercos-Pita
1ab919ef7e
Corrected the angle bounds
2014-07-13 11:08:56 +02:00
Jose Luis Cercos-Pita
9a12a16cc4
Added units mangement to the transversal areas tool
2014-07-13 11:08:55 +02:00
Jose Luis Cercos-Pita
39769e887a
Added helpers for mass, time and angle units
2014-07-13 11:08:54 +02:00
Jose Luis Cercos-Pita
1ce24c879f
Added units mangement to the outline drawing tool
2014-07-13 11:08:53 +02:00
Jose Luis Cercos-Pita
978030a678
Moved to InputField widget in ship creation
2014-07-13 11:08:52 +02:00
wmayer
d7fafdb2b6
+ split create/edit sketch command into two commands
2014-07-13 10:17:50 +02:00
wmayer
da708faa5e
+ support compounds of wires or faces for extrusion with tapered angle
2014-07-12 17:44:33 +02:00
wmayer
4ae29bc2e3
+ implement solve() in Python API of SketchObject
2014-07-12 17:13:05 +02:00
wmayer
8f7966ed37
+ fix override/restore cursor issue with task panel
2014-07-12 17:00:00 +02:00
wmayer
f91c64aba9
+ fix crash when trying to edit broken revolve object
2014-07-12 16:13:13 +02:00
Yorik van Havre
72166ceabe
Draft - updated DXF importer
...
* Updated the importer to v1.38 (several fixes from the Blender branch)
* Enabled export of Bezier curves
2014-07-11 18:34:28 -03:00
Yorik van Havre
cbcbba24d2
Draft: Further fix in text encodings
2014-07-11 17:41:26 -03:00
wmayer
3cfab20586
+ simplify basic VRML export of mesh kernel, + allow to export mesh with texture via Python
2014-07-11 19:34:14 +02:00
wmayer
750a04d400
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-07-11 19:28:25 +02:00
wmayer
ec6f6ac128
+ simplify basic VRML export of mesh kernel, + allow to export mesh with texture via Python
2014-07-11 19:27:48 +02:00
Yorik van Havre
88471d390f
Draft - fixed some text encodings in dimensions
2014-07-11 11:54:33 -03:00
Yorik van Havre
8188bd5385
Draft: Fixed escape() bug in Draft GUI
2014-07-07 12:07:53 -03:00
wmayer
5b348b0dcf
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-07-07 13:57:17 +02:00
wmayer
0a986ddca6
+ give more information when assigning wrong type to quantity property
2014-07-07 13:56:23 +02:00
Yorik van Havre
1be778a53d
Spreadsheet: Fix to prevent unwanted characters in spreadsheet cells
2014-07-06 18:50:40 -03:00
wmayer
3d87d88616
+ fix Part.makeTube
2014-07-05 15:48:50 +02:00
Yorik van Havre
56ea36d94f
updated version number in makedist script
2014-07-04 20:33:08 -03:00
Yorik van Havre
1124a57514
Draft: fix in angular dimension
2014-07-01 22:30:36 -03:00
Sebastian Hoogen
691fd11286
Raise exception if the OpenSCAD executeable is unavailable
2014-07-01 12:32:05 +02:00
Sebastian Hoogen
5374302e93
Add default for path to OpenSCAD on Mac OS X
2014-07-01 12:32:04 +02:00
wmayer
b83f07fe2e
+ workaround for issue with group separator
2014-07-01 12:22:24 +02:00
wmayer
e8724884d0
+ add further log messages at startup for better troubleshooting, fix possible crash, fix typos
2014-07-01 11:03:55 +02:00
Yorik van Havre
f40d4ac65b
Arch: disabled buggy wall auto-corners function
2014-06-30 22:16:34 -03:00
wmayer
63aed855ab
+ improve error handling when rendering a raytracing project
2014-06-27 11:58:56 +02:00
wmayer
2def3c03b8
+ update x64 installer
2014-06-25 18:56:50 +02:00
Sebastian Hoogen
382e055e9b
+ fixes #0001579 : exportCSG.shape2polyhedron supplies wrong parameters to mesher
2014-06-25 14:14:30 +02:00
Keith Sloan
4ce8a93ad7
Correction to use Value to convert units to mm from any
2014-06-25 14:14:29 +02:00
wmayer
ef08a61a4d
+ fixes #0001354 : Crash on using Enter-Key for confirmation of chamfer or fillet entries
2014-06-24 10:18:58 +02:00
wmayer
e036460635
+ fixes #0001565 : Images in the 3D plane are not shown after opening a project
2014-06-23 14:02:26 +02:00
Yorik van Havre
b08e5dec7c
Arch: small fix in section planes
2014-06-21 18:57:14 -03:00
Yorik van Havre
13e006cf35
Arch: added an option to section planes to allow non-solids to be cut too
2014-06-21 11:59:33 -03:00
wmayer
07c64e206d
+ encode CR and LF for XML
2014-06-14 18:04:19 +02:00
wmayer
bfae053eb4
+ fix a couple of issues with InputField used in property editor
2014-06-14 16:22:56 +02:00
wmayer
00e041ffb3
+ fixes #0001580 : Adding transparency to povray output
2014-06-14 14:19:29 +02:00
wmayer
3523741e96
+ make POV-Ray renderer working on Windows
2014-06-14 13:26:25 +02:00
wmayer
d101c64635
+ replace 'Platform' with 'Word size'
2014-06-13 18:37:15 +02:00
Yorik van Havre
b0c157a5ea
Draft: better method for DraftGeomUtils.isPtOnEdge
2014-06-11 10:37:48 -03:00
Yorik van Havre
57999cb78d
Arch: More minor fixes
2014-06-10 23:13:23 -03:00
Yorik van Havre
7e20c0c01c
Arch: Small cosmetic fix
2014-06-10 22:51:04 -03:00
Sebastian Hoogen
830ab19393
improvements to exportDRAWEXE
...
bugfix for mirroring
add support for Draft Wire
move sweep export to function
add support for Draft circle
2014-06-10 10:36:09 -03:00
Sebastian Hoogen
7ab2f4fe1f
use compounds for unknown shape types
...
in OpenSCADUtils.applyPlacement
2014-06-10 10:36:09 -03:00
Sebastian Hoogen
fc31b3179a
remove unused tokens in importCSG
2014-06-10 10:36:08 -03:00
Yorik van Havre
4e595bd7bb
Draft: Renamed Layer to VisGroup
2014-06-10 10:21:01 -03:00
wmayer
2320e994b3
+ fix possible crash in InputField::selectNumber
2014-06-10 14:10:36 +02:00
wmayer
82b8df576d
+ select value in task pad panel
2014-06-10 12:33:56 +02:00
wmayer
30e8c12f54
+ fixes #0001562 : Add units to Fillet and Chamfer in PartDesign
2014-06-10 12:33:14 +02:00
wmayer
8923810e1d
+ fixes #0001562 : Add units to Fillet and Chamfer in PartDesign
2014-06-10 12:32:57 +02:00
wmayer
f867733499
+ restore selected numbers in input field after showing it, select numbers if widget gets focus by Tab/Backtab/Shortcut
2014-06-10 11:34:23 +02:00
Yorik van Havre
39e412da56
Arch: Bugfixing and cleaning in IFC export, support of Spaces
2014-06-08 21:11:20 -03:00
Yorik van Havre
24f83252a6
Draft: Allow snapping to the center of ellipses
2014-06-08 19:36:59 -03:00
wmayer
32f509cba1
+ do not close placement dialog if an error occured when pressing OK
2014-06-07 20:14:00 +02:00
Yorik van Havre
92a565f6ac
Arch: Misc fixes
...
* Allow to export subtractions as separate elements in IFC
* Fixed Survey tool
* Removed unused Arch preferences
2014-06-07 12:09:58 -03:00
wmayer
39bda90514
+ change comment
2014-06-07 10:56:45 +02:00
Abdullah Tahiri
63ab2d7f12
Fixed Datum Filter showing Named non-datum variables
2014-06-07 10:50:14 +02:00
wmayer
f0bd78bee9
+ fix issue with default value and unit in InputField
2014-06-06 16:17:47 +02:00
wmayer
2fcce866a7
+ change order of tangent and coincident constraints of slot
2014-06-06 00:33:56 +02:00
wmayer
dfda6704d7
+ abort slot creation in error case
2014-06-06 00:08:26 +02:00
wmayer
c07358073a
+ whitespace improvements
2014-06-05 23:24:59 +02:00
wmayer
8dbbdd3dd8
+ fix path separator issue in widget factory
2014-06-04 13:28:33 +02:00
wmayer
409285d53f
+ optimize creation of hexagonal sketch profile, add icon
2014-06-04 12:05:41 +02:00
wmayer
5917d21395
+ implement hexagon sketch
2014-06-03 14:54:27 +02:00
wmayer
c05801d6ed
+ fixes for sketcher
2014-06-03 11:24:49 +02:00
Yorik van Havre
6a212b32f6
Draft: Clones are now 2D if made from a 2D object
2014-06-02 11:23:39 -03:00
Yorik van Havre
f2cb5394e1
Draft: small fix in DXF importer
2014-06-02 11:08:49 -03:00
wmayer
c31b661004
+ fixes #0001569 : Bounding Box of Mesh::Feature in the Gui does not respect the Placement
2014-06-02 13:06:14 +02:00
wmayer
3291233012
+ Support .qss file extension for style sheets
2014-06-02 12:26:25 +02:00
Yorik van Havre
5424ad1d6a
Arch: Support for extruded curves in IFC export
2014-06-01 21:45:48 -03:00
wmayer
52c385003f
+ optimization for icon retrieval in InputField
2014-05-30 12:56:26 +02:00
Sebastian Hoogen
4c48bdf216
remove DRAWEXE exporter form release
2014-05-25 16:07:02 -03:00
Yorik van Havre
940f7e69ba
Updated translations
2014-05-24 17:35:20 -03:00
wmayer
0acb77e8de
+ add missing header
2014-05-24 17:10:17 +02:00
wmayer
51b2af52fd
+ allow to select whole wire in sweep panel
2014-05-24 15:33:23 +02:00
Yorik van Havre
ce3a503bd6
Small fix in offline doc tools
2014-05-23 19:45:56 -03:00
wmayer
91ad22e3ab
+ allow to select whole wire in sweep panel
2014-05-23 19:27:14 +02:00
Yorik van Havre
2313c5d757
Removed text 'Development version' from splashscreen
2014-05-22 15:27:17 -03:00
Yorik van Havre
887bf86ad7
Updated offline doc files
2014-05-22 15:22:46 -03:00
Yorik van Havre
42d9f1ecab
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-05-21 18:10:59 -03:00
Yorik van Havre
0a71f4a8a7
Arch: Added default pref settings for stairs
2014-05-21 18:10:33 -03:00
Johannes Reinhardt
4a6449d2bd
deactivate commands in Arch if no document is open
2014-05-21 17:09:02 +02:00
Johannes Reinhardt
6f09d262d7
simplified IsActive method for commands
2014-05-21 17:08:47 +02:00
Yorik van Havre
e587fe2dba
Arch: Tesselation of curved brep faces in IFC export
2014-05-20 17:38:13 -03:00
corey625
c6d9c3789a
+ fixes #0000970 : IDF import skips first hole
2014-05-20 17:27:35 +02:00
wmayer
17b7003ea7
+ fixes #0001549 : crash with Draft move tool while sketch is in edit mode
2014-05-20 15:25:03 +02:00
Yorik van Havre
581d88485d
Arch: Better output messages if the shape of an arch object is invalid
2014-05-19 17:51:19 -03:00
wmayer
a871364066
+ replace degree symbol with 'deg' to make sure it works on all systems, force to use right codec to display floating numbers
2014-05-19 20:56:23 +02:00
WandererFan
5d2c285785
Add UNITS to Part Primitive Gui
2014-05-19 20:34:10 +02:00
Peter Lama
d95068a6a2
fixes #0001556 : About dialog font size is smaller on Mac
2014-05-19 18:44:59 +02:00
Sebastian Hoogen
bff814b73a
support Part::Compound in OpenSCADCommands.ExplodeGroup
2014-05-18 21:13:29 -03:00
Sebastian Hoogen
941fc5c992
+ fixes #0001543 : OpenSCAD.RefineShape Features breaks Placement for 'faces'
2014-05-18 21:13:29 -03:00
Sebastian Hoogen
27a2e52d66
+ fixes #0001537 : python function to apply a placement to a shape
2014-05-18 21:13:29 -03:00
Sebastian Hoogen
bddb6f9099
added support for Part::Sweep in exportDRAWEXE
2014-05-18 21:13:29 -03:00
Yorik van Havre
2e24d5b122
Arch: Added ellipses support to IFC export
2014-05-18 15:16:03 -03:00
Yorik van Havre
19440ceae0
Arch: Small fix in windows
2014-05-18 14:38:00 -03:00
Yorik van Havre
7e898c0336
Draft: Fixed offset of wires containing arcs
2014-05-17 18:58:21 -03:00
wmayer
81bfcc8717
+ fix issues with angle constraints
2014-05-17 18:27:56 +02:00
Yorik van Havre
da4f1bda47
Draft: Used replace strategy in latin1 encodings - issue #853
2014-05-17 12:32:04 -03:00
Yorik van Havre
293930bdf8
Arch: Using 2D coordinates for polylines in IFC export
2014-05-17 11:56:09 -03:00
Yorik van Havre
44e354bfdd
Arch: stronger handling of errors in IFC export
2014-05-16 21:30:00 -03:00
Yorik van Havre
4906d8965f
Draft: Workaround ghost errors in move tool
2014-05-16 18:44:02 -03:00
Johannes Reinhardt
8c40c6d372
Changed povray, Povray and PovRay to POV-Ray
2014-05-16 19:46:11 +02:00
Johannes Reinhardt
641a2a75bf
fix typos in Sketcher
2014-05-16 19:27:13 +02:00
Johannes Reinhardt
c0d74422f4
fix typos in Robot module
2014-05-16 19:26:49 +02:00
Johannes Reinhardt
95dd0cc5a1
fix typos in PartDesign module
2014-05-16 19:26:29 +02:00
Johannes Reinhardt
a1d04d82fb
fixed typos in Part module
2014-05-16 19:26:06 +02:00
Johannes Reinhardt
7b41bdfe4f
fix typos and links in StartPage module
2014-05-16 19:25:41 +02:00
Johannes Reinhardt
af964f8509
fix typos in Mesh module
2014-05-16 19:25:11 +02:00
Johannes Reinhardt
a4cc793c4c
fix typos in OpenSCAD workbench
2014-05-16 19:24:49 +02:00
Johannes Reinhardt
604c556b85
Change "making" to "creating"
...
This avoids a double entendre in "making faces" and keeps consistency.
2014-05-16 19:24:21 +02:00
Johannes Reinhardt
8edff98505
fixed some obvious typos
2014-05-16 19:23:39 +02:00
wmayer
624537e5b6
+ do not accept objects with no sub-elements selected if this is required
2014-05-16 19:09:15 +02:00
wmayer
0b7b0ecc21
+ whitespace improvements
2014-05-16 17:17:10 +02:00
wmayer
007bcbdc7f
+ fix crash in CmdSketcherMapSketch
2014-05-16 15:34:26 +02:00
wmayer
d85f442089
+ add InputField to widget plugin
2014-05-15 18:10:26 +02:00
wmayer
037eb8eee3
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-05-15 12:38:09 +02:00
wmayer
318c4b6ce9
+ fixes #0001547 : add Part Spiral to the selectable list of profiles for a Part Loft
2014-05-15 12:37:39 +02:00
Stefan Tröger
8106f8437c
fix sketcher arrow size and make them independend from window size
2014-05-14 22:43:31 +02:00
wmayer
f9ff3b250e
+ fixes #0001544 : Python function to retrive direct children of a shape using TopoDS_Iterator
2014-05-14 18:14:06 +02:00
wmayer
65071e1684
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-05-14 15:47:40 +02:00
wmayer
9e5ed987cc
+ fixes #0001542 : 4 empty / blank buttons - Customize / Toolbars Tab / Move buttons (right,left,up,down) missing icons
2014-05-14 15:46:52 +02:00
Yorik van Havre
757c7ab33e
Draft: Fixed task dialog error
2014-05-14 10:42:31 -03:00
wmayer
f7a42f25b9
+ extend makeFilledFace
2014-05-14 13:18:23 +02:00
jmaustpc
5c8ff0bf6c
Part primitives dialogue minor typo and tab stops
...
change the u and v parameter’s label
from "parametric" to "parameter"
also
add tabstops in DlgPrimitives.ui
to correct the order of tab stops
for torus, Helix and spiral
input fields
2014-05-14 15:04:40 +10:00
Yorik van Havre
6ec53ed397
Arch: fix in IFC export or circles
2014-05-13 18:17:09 -03:00
wmayer
1fbfa1c17a
+ fix crash in SoBrepEdgeSet::renderSelection
2014-05-13 19:12:10 +02:00
Stefan Tröger
e451efd9c4
fix inverted sketcher font-size issue and make font size undependend of window size
2014-05-13 18:20:38 +02:00
wmayer
c212e75fcc
+ allow to always run macros, fix disappearing grid in sketcher
2014-05-13 16:20:51 +02:00
wmayer
0874bfac75
+ path selection on sweep panel
2014-05-13 14:35:48 +02:00
Yorik van Havre
a2243e9fb5
Draft: enabled double-click on dimensions
2014-05-12 21:54:51 -03:00
Yorik van Havre
8d16e0e0a3
Arch: Fixed some bugs in IFC export
2014-05-12 19:52:25 -03:00
wmayer
066fbfda0a
+ avoid unncessary calls of setSampleBuffer
2014-05-12 18:53:21 +02:00
Johannes Reinhardt
2b28d41134
fixed a few small typos
2014-05-12 14:32:27 +02:00
wmayer
a96d5ba382
+ fix broken connection of signal/slot in placement dialog
2014-05-12 14:27:47 +02:00
wmayer
30e5321e76
+ fix whitespaces and a few minor things
2014-05-12 14:14:23 +02:00
wmayer
f1762edd6c
+ workaround to avoid to create invalid code with moc
2014-05-12 13:39:57 +02:00
Stefan Tröger
21b019fd24
ensure that the placement values are used with every relevant decimal from the property editor
2014-05-12 09:40:16 +02:00
Stefan Tröger
8ff14c8fdb
port the placement dialog to the inputfield
2014-05-12 09:40:16 +02:00
Stefan Tröger
9f7c784437
add inputfield to placement in property editor
2014-05-12 09:40:15 +02:00
Stefan Tröger
58a781e5c4
add inputfield to property editor for PropertyQuantity and PropertyQuantityConstraint
2014-05-12 09:40:14 +02:00
Yorik van Havre
ec442507e1
Updated ts files
2014-05-11 14:49:24 -03:00
Yorik van Havre
2798de1afa
Arch: Big cleanup - fixes #1524
...
* Removed redundant code in Arch objects
* Supports wandererfan's Units code in Draft module
* Cleanup of the IFC exporter
* Better support of extruded profiles in IFC export
2014-05-11 14:40:39 -03:00
wmayer
068452f0ac
+ add '_' as prefix for PartDesign module to fix name clash
2014-05-10 14:12:25 +02:00
wmayer
6b89c03181
Add initial support for different libdir (jobermayr)
2014-05-10 12:57:38 +02:00
WandererFan
33a4b6d7ba
fixes #1319
...
allow Part.makeHelix to use 'vertical height' parm
correct lefthanded conical helixes in TopoShape::makeHelix
2014-05-10 11:05:52 +02:00
Yorik van Havre
392cf965af
Draft: small improvements to units system in dimensions
2014-05-09 17:47:08 -03:00
wmayer
a5efc53bfc
+ fix transparency issue, disable sample buffers when using front buffer
2014-05-09 19:20:30 +02:00
wmayer
320fabfc98
+ whitespace improvements
2014-05-09 12:18:58 +02:00
wmayer
c5299ed75c
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-05-09 11:30:11 +02:00
Stefan Tröger
571b6391ee
Add multisampling anti-aliasing
2014-05-09 11:24:38 +02:00
Yorik van Havre
1fffc978b4
Draft: small fix to units parsing - issue #1524
2014-05-08 16:15:52 -03:00
Jose Luis Cercos-Pita
cea686b7d6
Updated the example ships
2014-05-08 19:00:27 +02:00
Jose Luis Cercos-Pita
a8d9bde258
Removed drawing capabilities (which are covered by another module)
2014-05-08 19:00:27 +02:00
Jose Luis Cercos-Pita
a212cab150
Fixed table point manual set
2014-05-08 19:00:26 +02:00
wmayer
9321f662a9
+ fixes #0001536 : Feature.Placement.Rotation.isNull() touches the Feature
2014-05-08 18:52:08 +02:00
wmayer
d907d372a4
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-05-08 17:32:37 +02:00
wmayer
0467777d1b
+ remove unneeded semicolons
2014-05-08 17:32:23 +02:00
wmayer
6d17bbb7f6
+ fixes #0001535 : Remove conflict between min/max macros and std::min/max
2014-05-08 17:30:23 +02:00
Yorik van Havre
9cd2c750db
Draft: Fixed inverted arcs in DXF output - fixes #1513
2014-05-08 12:29:15 -03:00
Yorik van Havre
8e1ebcd6fb
Draft: issue #1524 - Added Wandererfan's fix to displayExternal
2014-05-08 10:49:10 -03:00
Yorik van Havre
96bba087eb
Draft: Filling objects with faces is now optional - fixes #1395
...
Closable Draft objects now have a new MakeFace property, that specifies
if they must be turned into a face or stay a wire only. Older Draft
objects continue to behave the old way for compatibility. The default
behaviour can be set in Draft Preferences -> Fill objects with faces
2014-05-07 19:03:00 -03:00
Yorik van Havre
78a36e4e9a
Draft: supported comma as decimals separator
2014-05-07 17:26:31 -03:00
WandererFan
f37a15c1af
issue #1524 UNITS for Draft Dimension
2014-05-07 11:13:34 -03:00
WandererFan
dea3fa6c66
issue #1524 Add UNITS to Draft Shapestring
2014-05-07 11:13:34 -03:00
wmayer
3b5cdda879
+ fix flaws found with code analyzer tool
2014-05-07 13:09:44 +02:00
wmayer
94f10f5d95
+ issue #0001419 : FreeCAD crash on Windows 8.1.
2014-05-05 22:24:16 +02:00
wmayer
ea5a4570fd
+ Fix DLL warning with MSVC
2014-05-05 18:59:21 +02:00
wmayer
2d4110b0f3
+ Better support of clang, fix issues discovered by clang
2014-05-05 18:25:59 +02:00
wmayer
3b6d07833d
+ compile with clang
2014-05-05 16:24:01 +02:00
WandererFan
213a09c163
issue #1524 - Units in Draft Gui
...
- basic working version for points,radii entry
- logic added to Trimex, Offset, Rotate
2014-05-05 07:49:01 -04:00
Yorik van Havre
5c01cf0a89
Arch: Fixed OBJ exporter to work with curves - fixes #1527
2014-05-04 13:04:52 -03:00
wmayer
cb720fae50
+ fixes #0001517 : Problem with constraint menu not displaying properly if moved (overwrites the background)
2014-05-03 23:39:04 +02:00
blobfish
adda1afc4c
Part: Check Geometry: Config option for new, additional BOP check
2014-05-03 19:14:55 +02:00
Yorik van Havre
9238d8ff43
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-05-03 13:01:09 -03:00
Yorik van Havre
32d7839da4
Draft: use latin1 in texts if coin < 4 - issue #1404
2014-05-03 13:00:44 -03:00
wmayer
fb8e794fc3
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-05-03 17:59:48 +02:00
wmayer
c3b1c9ec56
+ fixes #0001522 : SIGSEGV, crashes on long script (500 Lines)
2014-05-03 17:58:57 +02:00
Yorik van Havre
e0e6f9bf2e
Draft: Fixed radius and offset numeric values - fixes #1530
2014-05-03 12:37:46 -03:00
Yorik van Havre
e2650dc341
Draft: Turned the tray tools into a toolbar
2014-05-03 12:32:39 -03:00
Jose Luis Cercos-Pita
052999e94a
Improved the icon
2014-05-03 16:10:17 +02:00
Jose Luis Cercos-Pita
8fff477f16
Removed tank unused instance
2014-05-03 16:10:16 +02:00
Jose Luis Cercos-Pita
6094db62f2
Cleared unused tools
2014-05-03 16:10:15 +02:00
Jose Luis Cercos-Pita
12198fcf52
Cleared unused OpenCL stuff
2014-05-03 16:10:14 +02:00
Jose Luis Cercos-Pita
97e1c00c58
Cleared old hydrostatics icons
2014-05-03 16:10:13 +02:00
Jose Luis Cercos-Pita
f99b67f11c
Fixed units usage
2014-05-03 16:10:13 +02:00
Jose Luis Cercos-Pita
2f22ac7816
Fixed bad equation close position
2014-05-03 16:10:12 +02:00
Jose Luis Cercos-Pita
fa9f40e9b3
Cleared some debug info
2014-05-03 16:10:11 +02:00
Jose Luis Cercos-Pita
751f40c493
Fixed PySide pitfall
2014-05-03 16:10:11 +02:00
Jose Luis Cercos-Pita
e7c3e264ff
Updated the hydrostatics tool
2014-05-03 16:10:10 +02:00
Jose Luis Cercos-Pita
1801857108
Updated the resources
2014-05-03 16:10:09 +02:00
Jose Luis Cercos-Pita
ec14ccb252
Created an hydrostatics tool icon (svg format)
2014-05-03 16:10:09 +02:00
Jose Luis Cercos-Pita
67d10aa23b
Removed Simulation icons
2014-05-03 16:10:08 +02:00
mdinger
337f05d56e
Move python module prefix and suffix properties into macro to be set together
2014-05-03 16:00:30 +02:00
wmayer
0eb6acdc1c
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-05-03 14:06:48 +02:00
wmayer
05dac2eeb3
+ Exception handling in _BSpline.execute
2014-05-03 14:06:14 +02:00
Yorik van Havre
90f2fc2034
Arch: Turned jreinhardt's fix to webGL into an option
2014-05-02 17:20:17 -03:00
wmayer
07f3f8257b
+ Remove external geometry when changing support face
2014-05-02 12:03:52 +02:00
wmayer
ec7573da42
Reorient sketch loses constraints (fix from chrisf)
2014-05-01 18:04:33 +02:00
wmayer
a17116f465
+ Add action to modify current item in constraint view
2014-05-01 16:12:03 +02:00
wmayer
3f9640908b
+ Add context-menu to constraint view for renaming and deleting items, fix edit mode
2014-05-01 15:36:52 +02:00
wmayer
9622b98de9
+ Fix name clash of PDB files
2014-05-01 14:14:59 +02:00
Sebastian Hoogen
8dca9210d8
use transformShape for uniform scaling in Draft._Clone Feature
2014-05-01 11:59:56 +02:00
Sebastian Hoogen
49de4f6760
add support for Draft.Clone in exportDRAWEXE
...
use pscale for uniform scaling of clone object
2014-05-01 11:59:41 +02:00
wmayer
66de74d14a
+ Remove redefinition of /EHa which causes warnings with QtCreator
2014-04-30 19:21:49 +02:00
wmayer
1a7cea9b59
+ Fix prefix of Python extensions built with MinGW
2014-04-30 18:22:52 +02:00
mdinger
f890d1d1cb
Fix precompiled header build error
2014-04-30 13:41:19 +02:00
mdinger
5fbc308ce4
Comment to document why this module alone is installed differently
2014-04-30 13:41:17 +02:00
mdinger
88a3e5bf0e
Add 4th optional parameter to set linux install path
2014-04-30 13:41:17 +02:00
mdinger
a17cce3559
Remove unnecessary quotes.
2014-04-30 13:41:16 +02:00
mdinger
6accb6da54
Remove extra parameter. Fix FreeCAD* names.
2014-04-30 13:41:15 +02:00
mdinger
1942bb7906
Apply SET_BIN_DIR macro to Mod
2014-04-30 13:41:13 +02:00
mdinger
085736095e
Insert SET_BIN_DIR macro everywhere except Mod
2014-04-30 13:41:12 +02:00
mdinger
d137a9ef05
Make macro to set bin directory. Apply to ANN, Pivy, and solomesmesh.
2014-04-30 13:41:11 +02:00
Johannes Reinhardt
1479765154
fix export of circular edges
2014-04-29 16:00:42 -03:00
Johannes Reinhardt
30ef37715f
added webGL export option for faceloop linewidth
2014-04-29 16:00:42 -03:00
Yorik van Havre
5229e5461a
Draft: support for multiline dim texts in svg
2014-04-29 09:41:04 -03:00
Cercos-Pita J.L
7dc6f0ee2d
Cleared the simulations stuff
2014-04-29 09:50:04 +02:00
Cercos-Pita J.L
e0706a0a82
Fixed the Units usage
2014-04-28 16:48:41 +02:00
Cercos-Pita J.L
fcfac342f2
Fixed the Units usage
2014-04-28 16:43:10 +02:00
Cercos-Pita J.L
493d1cc48b
Set the ship values in meters
2014-04-28 16:20:51 +02:00
jriegel
93fc937bd1
Close window interface in Plot
2014-04-27 18:12:02 +02:00
Yorik van Havre
c64b169164
Arch: fixed importWebGL to work from command line
2014-04-27 10:49:46 -03:00
Yorik van Havre
ccde13acd9
Arch: allow to set a custom camera position in webgl export
2014-04-27 00:00:10 -03:00
Yorik van Havre
710882d2a4
Arch: Place polylines in the XY plane by default in IFC export
2014-04-26 13:37:31 -03:00
Yorik van Havre
8f469bfd03
Arch: made importWebGL easier to use in python scripts
2014-04-26 13:09:43 -03:00
wmayer
3ceb840f5d
+ put fillet, chamfer, array features into the same group
2014-04-25 19:42:35 +02:00
wmayer
8e6773d74d
+ use term 'word size' in About dialog
2014-04-25 18:48:43 +02:00
wmayer
5370e20ce8
+ fixes #0001514 : Padding a sketch inside a group fails with error message
2014-04-25 17:28:32 +02:00
wmayer
321063bb9c
+ Get program arguments as unicode string under Windows
2014-04-25 15:28:20 +02:00
wmayer
b7ff37e53d
+ Update check states in fillet dialog
2014-04-25 11:45:39 +02:00
wmayer
3ab43ee426
+ Replace 'Platform' with 'Program type' to avoid confusion with the OS platform type
2014-04-25 11:16:46 +02:00
WandererFan
62f00095cd
Issue #1508 Solid tickBox for Part.Revolution
...
Creates Solid for closed Edges & Wires
2014-04-25 10:07:21 +02:00
Yorik van Havre
8ff9fb9db9
Arch: added pref setting to disable aggregation of windows into their host walls
2014-04-24 20:44:59 -03:00
Yorik van Havre
79efe68e25
Arch: changed download folder to use the macros folder pref setting
2014-04-24 18:53:06 -03:00
wmayer
db72aa2a98
+ Improve performance when selecting all edges of an edited fillet feature
2014-04-24 22:29:07 +02:00
wmayer
573c1abb29
+ Improve performance when deselecting all edges of an edited fillet feature
2014-04-24 17:30:58 +02:00
wmayer
d8dba90ab4
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-04-24 13:30:09 +02:00
wmayer
96f366671b
+ improve performance of editing fillet feature (patch from chrisf)
2014-04-24 13:29:25 +02:00
Yorik van Havre
ac2963de4e
Draft: small change in Dan's tesselation code
2014-04-23 19:43:00 -03:00
Daniel Falck
91ab4c340a
adding tessellation to ellipses and adding a user parameter for line
...
segment length of ellipses and splines with a Shape2DView projection.
This will make it useful for DXF output.
2014-04-23 19:39:57 -03:00
Daniel Falck
4d2d7b65ae
forgot to add include file for this
2014-04-23 19:39:57 -03:00
Daniel Falck
3abe4d460d
had trouble rebasing so added tanderson's commits by copy paste method
2014-04-23 19:39:57 -03:00
Yorik van Havre
3387992358
Arch: Added alternative to export multi-solids objects to IFC
2014-04-23 17:20:57 -03:00
Yorik van Havre
dcc81c513d
Arch: Support of circle-based extrusions in IFC export
2014-04-23 15:51:59 -03:00
wmayer
a31ce8e386
+ fixes #0001512 : After trying to set a bad value, the pad editor does not show
2014-04-23 17:10:28 +02:00
Yorik van Havre
cd7c1f2307
Arch: Better sticking to standards in IFC import/export
2014-04-21 23:06:44 -03:00
Yorik van Havre
321706c0d3
Arch: Allow to skip entities in IFC importer
...
import importIFC
importIFC.open("/path/to/myfile.ifc",skip=[14,577,5447])
2014-04-20 21:46:50 -03:00
Yorik van Havre
cbb2add6a0
Arch: more exceptions catched in IFC importer
2014-04-20 19:55:53 -03:00
Yorik van Havre
96967a5162
Draft: further fix for utf8 texts - issue #1404
2014-04-19 13:26:24 -03:00
Yorik van Havre
e2b24d8606
Draft: DXF in/out now supports Draft Layers - fixes #1504
2014-04-17 19:02:57 -03:00
Yorik van Havre
6f896d8f22
Draft: Added Layer tool - issue #1504
2014-04-17 18:18:51 -03:00
Yorik van Havre
70df8540a7
Arch: IFC importer now supports latest IfcOpenShell with separate openings and placements
2014-04-17 12:02:45 -03:00
WandererFan
ef8bae9ab7
Correct handling of rotated base shape.
2014-04-17 10:03:33 +02:00
jriegel
55d0ad5c5c
Some fixes for ProfileLib
2014-04-17 06:33:58 +02:00
jriegel
2a950d66ea
Add some error reporting for python GuiCommands
2014-04-17 06:33:58 +02:00
jriegel
280448e01c
Fix unit error checking in InputField
2014-04-17 06:33:57 +02:00
jriegel
faf406fa2b
fix wrong cursor icon in Slot
2014-04-17 06:33:57 +02:00
jriegel
39f7353663
Implement Constraint creation on Slot
2014-04-17 06:33:57 +02:00
Yorik van Havre
39d065717c
Arch: Better IFC export of walls
2014-04-16 18:43:01 -03:00
Yorik van Havre
5d5ed949c6
Arch: Added pref options for window transparency and collada export scaling - fixes #1379
2014-04-16 17:21:21 -03:00
Yorik van Havre
dfe1c84796
Arch: Fixed face normals in IFC export
2014-04-16 16:36:52 -03:00
Yorik van Havre
8fdd04928e
Rebuilt the Qt documentation from the current wiki
2014-04-16 15:49:44 -03:00
Yorik van Havre
f5627b33b2
Draft: Switching to Units system
2014-04-16 15:35:03 -03:00
Yorik van Havre
97663851ec
Arch: Fixed in IFC import
2014-04-16 10:56:46 -03:00
wmayer
61919e89ab
+ implement input validator for range checking
2014-04-16 12:03:18 +02:00
jriegel
9c07f81240
Start profile lib in sketcher
2014-04-16 07:49:09 +02:00
jriegel
1f0d427ed3
further implementing slot
2014-04-16 07:49:09 +02:00
Yorik van Havre
2fa481379f
Spreadsheet: removed automatic updating and added a compute button
2014-04-15 18:47:37 -03:00
jriegel
aa5a2e1b3f
New Unit-Schema ImperialDecimal
2014-04-15 18:25:00 +02:00
WandererFan
79b8e07338
Fix Mantis #1500 for Draft Ellipse,Shape2DView
2014-04-15 10:55:04 -03:00
Yorik van Havre
c1978ec97c
Draft: small fix in dimensions
2014-04-15 10:34:45 -03:00
jriegel
87bed7d5c4
start slot draw handler for Sketcher
2014-04-15 07:00:17 +02:00
jriegel
ca642bb546
InputField for Grid-Size in Sketcher
2014-04-15 07:00:16 +02:00
Yorik van Havre
79181ad877
Arch: small fixes
2014-04-14 21:19:47 -03:00
Yorik van Havre
5b020cb374
Spreadsheet: Small fixes and enabled double-click
2014-04-14 21:18:30 -03:00
Yorik van Havre
07172e9aaf
Used disable color instead of dark color for invisible tree items
2014-04-14 21:17:29 -03:00
Yorik van Havre
1a11636eb9
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-04-14 13:30:13 -03:00
Yorik van Havre
0d7d568600
Draft: refinements in Arch & Draft Drawing views
2014-04-14 13:29:55 -03:00
wmayer
384778e2db
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-04-14 18:15:27 +02:00
wmayer
f3b150c3ea
+ improve whitespaces
2014-04-14 17:14:26 +02:00
Sebastian Hoogen
9b554cb910
add icon OpenSCAD_IncreaseToleranceFeature
2014-04-14 11:59:01 -03:00
Sebastian Hoogen
cbc19a5197
Allow selection of two objects for OpenSCAD.replaceobject
2014-04-14 11:59:01 -03:00
Sebastian Hoogen
c860ccaf05
Proof of Concept for an exporter to DRAWEXE commands
...
support for MultiCommon and Part::MultiFuse
support Torus and Mirroring
added angle properties to sphere, cone and torus
reduce multi booleans starting from the beginning
save shapes without placement
save floats with higher precsion
shorten numbers
non-uniform scaling
support Part::Prism
2014-04-14 11:59:01 -03:00
Yorik van Havre
0a51595fe2
Arch: small bugfix in Add tool
2014-04-14 11:58:33 -03:00
WandererFan
d13946da11
Add function to Close Part.Loft (Gui & scripting)
2014-04-14 16:30:56 +02:00
jriegel
9a52d06dd5
Merge branch 'origin/master'
2014-04-14 06:44:59 +02:00
jriegel
432b224e03
Make InputField obey Minimum/Maximum property
2014-04-14 03:29:44 +02:00
jriegel
2bf7083db4
fix FEM result dialog
2014-04-14 03:17:37 +02:00
Yorik van Havre
fd993d2422
Draft: fixing a bug in Downgrade tool
2014-04-13 16:43:03 -03:00
Yorik van Havre
6113d15058
Draft: fixing bugs in opening older files
2014-04-13 16:36:53 -03:00
jriegel
a988ead620
Fix in color calculation
2014-04-13 18:03:04 +02:00
jriegel
eadc02d65d
some fixes in Fem
2014-04-13 16:42:41 +02:00
wmayer
e34c0f6734
+ fixes #0001505 : Fix multiple bugs in Idf.py
2014-04-13 16:34:14 +02:00
wmayer
be8c5938de
+ fixes #0001505 : Fix multiple bugs in Idf.py
2014-04-13 13:55:33 +02:00
Yorik van Havre
082aec2e6b
Arch: Fixed IFC importer to work with latest IfcOpenShell version
2014-04-12 20:43:23 -03:00
Yorik van Havre
1b08c704ea
Further adjustments in offline doc tools
2014-04-11 18:21:29 -03:00
Yorik van Havre
56935813e5
Arch: fixed bug when using the IFC importer twice
2014-04-11 15:35:57 -03:00
Yorik van Havre
dc0bbee020
More cleaning in offline doc scripts
2014-04-08 16:09:37 -03:00
Yorik van Havre
162b82016d
Housecleaning in offline docs scripts
2014-04-08 12:44:53 -03:00
wmayer
31ec4c8ffb
+ disable to set PYTHONPATH by default
2014-04-08 17:03:31 +02:00
wmayer
78b24c9ba7
+ fixes# 0001502: crash when using 'move' tool in part workbench
2014-04-08 13:59:22 +02:00
wmayer
95bda08764
+ fix crash when closing sketch while external geometry handler is still active
2014-04-08 12:07:03 +02:00
wmayer
6eee3c6146
+ fix minor issues with graph export
2014-04-07 19:38:54 +02:00
Yorik van Havre
2845505c9f
Draft: preparing for units support
2014-04-07 12:17:48 -03:00
wmayer
f62ff52302
+ fixes #0001501 : Add Ability to Export Dependency Graph as SVG and PNG
2014-04-07 14:26:43 +02:00
wmayer
397ee6edde
+ avoid to build Material target all the time
2014-04-07 12:01:55 +02:00
Yorik van Havre
29b7ed3632
Arch: Switched structure and window to Units system
2014-04-06 18:47:46 -03:00
Yorik van Havre
4e656dd5d5
Draft: added getShapes() function to DXF import
...
You can now use importDXF.getShapes(filename) to get a list
of shapes from a DXF file
2014-04-06 13:04:47 -03:00
wmayer
00d3a5d619
+ fix build failure, fix warning
2014-04-06 10:23:17 +02:00
wmayer
b5b6d49d2e
+ restore arrow cursor when mouse moves into empty area in 3d view
2014-04-05 19:57:40 +02:00
wmayer
a1e049bc8a
+ extend Python API of selection gate
2014-04-03 13:57:57 +02:00
wmayer
982a555dcb
+ code cleanup
2014-04-03 10:23:57 +02:00
wmayer
c332b3294e
+ Re-enable Mefisto for MSVC
2014-04-03 10:23:30 +02:00
wmayer
f2a922bdf2
+ implement key up/down for input field, fix wheel event
2014-04-02 12:22:28 +02:00
wmayer
25d0242f97
+ fixes #0001497 : Implement getCameraOrientation similarly to getViewDirection
2014-04-02 11:40:36 +02:00
wmayer
8c91a78703
+ fix bug in spiral creation
2014-04-02 10:46:13 +02:00
Yorik van Havre
8a14564883
Draft: Fixes from wandererfan
2014-04-01 19:23:31 -03:00
wmayer
7b07bdfe10
+ Add CountEdges to Python interface of Mesh class
2014-04-01 17:27:33 +02:00
wmayer
37cc136310
+ do meshing of shapes in parallel
2014-04-01 16:38:44 +02:00
wmayer
a0c8dc7466
+ use Quantity type as QVariant, add quantity property to InputField and implement a PySide converter
2014-04-01 15:43:40 +02:00
Yorik van Havre
2d724365cf
Arch: cosmetic improvements in wall and prefs
2014-03-31 16:25:41 -03:00
Yorik van Havre
57a6b82d50
Arch: fixed a text in Arch preferences
2014-03-31 15:44:46 -03:00
Yorik van Havre
10a4fc090c
Arch: Converted wall tool to units system
2014-03-31 15:40:52 -03:00
wmayer
e47b85994c
+ fix possible crashes in mirror and polar pattern feature
2014-03-31 16:35:22 +02:00
wmayer
aaeba38e78
+ Fix crash when editing the linear pattern feature, suppress some warnings in release mode
2014-03-31 14:42:55 +02:00
Yorik van Havre
fabe39b976
Draft: fixes in offset
2014-03-29 19:39:11 -03:00
Yorik van Havre
0087cfeccb
Spreadsheet: Allow to control sketches datum values
2014-03-29 18:38:33 -03:00
Yorik van Havre
cdc516a7da
Spreadsheet: small fix
2014-03-29 16:49:06 -03:00
Yorik van Havre
924392346b
Spreadsheet: property controller - fixes #926
...
Added a new object and tool called property controller, which
must be added to a spreadsheet and gives the value of a cell to
a property of an object.
2014-03-29 16:16:04 -03:00
Yorik van Havre
749a8fa1d6
Draft - enabled utf8 in coin3d and svg - relates to issue #1404
2014-03-29 14:31:45 -03:00
wmayer
8693bfab1a
+ remove plus sign
2014-03-29 13:19:48 +01:00
Barleyman
e1b5f91378
Update Idf.py
...
Fixes from bug 1366 http://www.freecadweb.org/tracker/view.php?id=1366
2014-03-29 13:08:22 +01:00
wmayer
69044c6bcd
Merge branch 'patch-1' of https://github.com/Barleyman/FreeCAD_sf_master
2014-03-29 13:00:41 +01:00
wmayer
f255948f1e
+ fixes : #0001475 : Implement a 3 point arc similar to solidworks in sketcher (mdinger)
2014-03-29 12:20:32 +01:00
wmayer
ce7a3ecaa2
+ fixes #0001490 : Implement a perimeter circle (3 point circle) similar to solidworks in sketcher (mdinger)
2014-03-29 12:03:17 +01:00
wmayer
9c806a427c
+ minor change in Vector2D
2014-03-29 11:57:58 +01:00
wmayer
79c0e0bd2a
+ fix typos or documentation
2014-03-29 11:46:07 +01:00
wmayer
5a8770553f
+ Re-insert workbench box in Complete due to weird behaviour on some systems
2014-03-29 09:53:26 +01:00
WandererFan
d68ea73879
Fixes to PathArray
...
- missing refresh() in DraftTools
- handle case where Base obj has non-trivial Placement
- copy Base obj format to PathArray object
2014-03-28 22:54:33 -03:00
Yorik van Havre
08d2121334
Arch: Axis-bbased structural systems are now a separate object - fixes #1486
2014-03-28 18:31:22 -03:00
Yorik van Havre
4f008b36f8
Arch: Added a pref option to export everything as Brep in IFC files
2014-03-27 18:55:55 -03:00
Yorik van Havre
e429b31acb
Arch: Fixed toolbar mode - fixes #1473
2014-03-27 17:18:14 -03:00
Yorik van Havre
ebb921d60a
Draft: Downgrade now splits multi-solid compounds into individual solids
2014-03-27 16:22:49 -03:00
Yorik van Havre
f9e26ee53c
Draft: Small fix in patterns
2014-03-27 11:52:07 -03:00
wmayer
6d53d9d50c
+ allow to set deflection of a mesh with exportStl
2014-03-27 10:41:25 +01:00
Barleyman
d40d5a3ee3
Update Idf.py
...
Fixes for bugs 0001491, 0001492, 0001493
2014-03-25 17:07:20 +02:00
wmayer
9414c938c6
+ Make extrude again working for shapes without wires but edges
2014-03-25 10:16:50 +01:00
wmayer
12277cccf2
+ Fix reference leak in _getSupportIndex
2014-03-25 10:15:54 +01:00
jriegel
dc6eeb10a6
fix load of BDF with element number bigger 1000000
2014-03-24 21:12:21 +01:00
Yorik van Havre
4bf2f92d70
Draft: small fix to Draft Clone
...
If scale is (1,1,1), matrix transform is no longer applied
2014-03-24 13:22:08 -03:00
Yorik van Havre
e293d61d54
Draft: Added Ulrichs patch to fix Draft-Drawing projections - fixes #1376
2014-03-23 17:28:17 -03:00
Yorik van Havre
3e80fa3d88
Fixes Draft encoding bug - fixes #1487
2014-03-22 13:25:59 -03:00
wmayer
225184270a
+ set correct group information to pad and pocket properties
2014-03-21 15:18:26 +01:00
wmayer
2bfb120ff7
+ fixes #0001484 : Do not sort properties in alphabetical order
2014-03-21 15:04:35 +01:00
wmayer
1c9c0d2e20
+ Apply patch on DocumentObject.py ( http://forum.freecadweb.org/viewtopic.php?f=22&t=6128 )
2014-03-21 09:53:22 +01:00
Peter Lama
72314b1b57
fixes #0001485 : 'About FreeCAD' disappears on Mac OS X
2014-03-20 16:47:35 -07:00
wmayer
ca6d372025
+ fixes #0001479 : 'Escape' key dismissing dialog cancels Sketch editing
2014-03-18 14:18:55 +01:00
wmayer
498032f958
+ fixes #0001480 : Crash when editing sketch with Pad hidden
2014-03-18 13:14:04 +01:00
wmayer
490f041717
+ fixes #0001477 : Spaceball becomes uncontrollable for large FreeCAD Documnets on X11 (spacenav)
2014-03-18 11:27:52 +01:00
wmayer
85bf3ab9f4
+ make sure to keep the same order of lines inside a line set as the edge order
2014-03-18 11:11:08 +01:00
wmayer
e1bba45f4c
+ use more speaking variable names
2014-03-18 10:59:20 +01:00
wmayer
6e4bac95ca
+ use more speaking variable names
2014-03-18 08:15:21 +01:00
WandererFan
13cdc443fa
Improve geom creation, scaling and translation
2014-03-18 07:57:44 +01:00
wmayer
c700d9d368
+ fix displacement of bounding box
2014-03-17 10:56:38 +01:00
wmayer
13cdc1cd39
+ issue #0001475 : Implement a 3 point arc similar to solidworks in sketcher
2014-03-17 09:41:51 +01:00
wmayer
a7aca65e77
+ issue #0001475 : Implement a 3 point arc similar to solidworks in sketcher
2014-03-17 09:37:56 +01:00
wmayer
d1341f36f7
+ issue #0001475 : Implement a 3 point arc similar to solidworks in sketcher
2014-03-16 16:03:32 +01:00
wmayer
35b10d68aa
+ issue #0001475 : Implement a 3 point arc similar to solidworks in sketcher
2014-03-16 13:29:44 +01:00
wmayer
cb04827d94
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-03-16 11:23:16 +01:00
wmayer
4fe3348e46
+ fixes #0001332 : Allow copy-paste on elements in Project tree
2014-03-16 11:22:42 +01:00
wmayer
4c23af2695
+ undo bad fix and add a comment
2014-03-16 00:25:56 +01:00
wmayer
3ea41ff0c9
+ fixes #0000844 : Cannot use edge hidden by sketch axis as external geometry
2014-03-15 19:53:14 +01:00
wmayer
e6bd7e8de3
+ fixes #0001188 : Change the word 'datum' as the label for the entry field for arcs and circles.
2014-03-15 17:11:44 +01:00
wmayer
7bc6e74115
+ ignore v/h axes and grid of sketcher on view fit
2014-03-15 16:08:24 +01:00
wmayer
01123ba30d
+ fixes #0001399 : Only build Salome Mesh when necessary
2014-03-15 14:02:35 +01:00
wmayer
66819d9dfb
+ allow to use copy() method for a null shape
2014-03-15 13:05:06 +01:00
wmayer
ea4abcb57a
+ issue #0001475 : Implement a 3 point arc similar to solidworks in sketcher
2014-03-15 12:50:24 +01:00
wmayer
23462b70d1
+ fix some issues
2014-03-15 12:36:07 +01:00
wmayer
b7cb49c3e3
+ issue #0001474 : crash selecting constraint
2014-03-15 11:32:03 +01:00
wmayer
599331ef11
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-03-14 19:39:33 +01:00
wmayer
06239e9a57
+ fixes #0001049 : Sketcher preferences in preferences editor
2014-03-14 19:39:11 +01:00
Yorik van Havre
f4bb393f0e
Arch: Fixed null shape copy() bugs
2014-03-14 12:55:11 -03:00
wmayer
f0b54d3ee5
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-03-14 15:29:26 +01:00
wmayer
bea4c44240
+ sketcher settings
2014-03-14 15:29:00 +01:00
Yorik van Havre
476b701396
Draft: Reorganized DXF preferences - fixes #1468
2014-03-13 14:09:16 -03:00
wmayer
2aa2cb3fa6
+ fixes #0001063 : Show a PropertyLink in Property view
2014-03-13 14:28:53 +01:00
wmayer
ded5d43428
+ polish x64 installer
2014-03-13 09:48:21 +01:00
wmayer
0fe987750b
+ polish x64 installer
2014-03-12 23:04:36 +01:00
wmayer
cd03973a9b
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-03-12 18:38:20 +01:00
wmayer
f96fbcacbe
+ fixes #0001412 : Extruding sketch doesn't make a solid
2014-03-12 18:37:49 +01:00
Yorik van Havre
23c44905fe
Draft: added a continue button to the Point tool - fixes #1386
2014-03-12 12:16:44 -03:00
Sebastian Hoogen
9d93ad760e
issue 0001469: OpenSCAD import more than one dxf layer
...
with the same name
remove all imported dxf geometry
change dxf import object naming to avoid conflicts with group names
2014-03-12 15:03:45 +01:00
wmayer
8b901df068
+ drag and drop on tree widget
2014-03-12 14:38:00 +01:00
wmayer
2db31c97ec
+ switch off mouse propagation of OpenGL widget
2014-03-12 14:01:35 +01:00
wmayer
f70f74c26d
+ clarify documentation of class DockWindowManager
2014-03-12 12:33:25 +01:00
wmayer
289d06bf8e
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-03-11 19:28:18 +01:00
wmayer
f80419ad3f
+ Avoid cyclic dependency of tree items
2014-03-11 19:27:46 +01:00
Yorik van Havre
798acd63d4
Fixed other typo
2014-03-11 14:44:37 -03:00
Yorik van Havre
1532ac44d3
Fixed typo
2014-03-11 13:41:53 -03:00
wmayer
fb8b88773a
+ fixes #0001058 : Add items to Fusion by dragging item onto it
2014-03-11 17:37:36 +01:00
wmayer
38d55b540e
+ Start drag and drop of view providers
2014-03-11 17:36:17 +01:00
wmayer
1818d375c6
+ fixes #0001357 : Freecad fails when sketch being deleted
2014-03-11 10:27:55 +01:00
Yorik van Havre
39a6b17036
Draft: bug in DXF export - fixes #1440
2014-03-10 22:36:37 -03:00
Yorik van Havre
3a8d83bed9
Updated ts files from source
2014-03-10 20:36:59 -03:00
Yorik van Havre
8fd3207765
Updated updatets.py script with Draft changes
2014-03-10 20:36:12 -03:00
wmayer
7e9e416c6c
+ polish x64 installer
2014-03-11 00:23:26 +01:00
wmayer
e45dab501c
+ fix minor issues in NSIS script
2014-03-10 23:36:53 +01:00
wmayer
0528c2f8f3
+ change copyright notice
2014-03-10 23:13:42 +01:00
wmayer
7176c0d9e2
+ minor fixes on x86 installer, new x64 installer
2014-03-10 23:09:36 +01:00
wmayer
1dd0f5af35
+ fix minor issues in NSIS script
2014-03-10 21:48:57 +01:00
wmayer
b9f284cb42
+ fixes #0001131 : Crash when trying to edit sketch
2014-03-10 17:16:47 +01:00
wmayer
ea9bc3a9f9
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-03-10 13:36:16 +01:00
wmayer
e7b44d2866
+ fixes #0001339 : Crash when giving sketch with external geometry a new support (face) after the original support was deleted
2014-03-10 13:35:41 +01:00
Yorik van Havre
664c50b6b6
Spreadsheet: small bugfixes
2014-03-09 22:13:15 -03:00
Yorik van Havre
eed8ec27df
Arch: Don't create a drawing view on section plane creation
...
This was very heavy and often caused unnecessary computations. Adding
a new Drawing view is now done manually, with the Draft to Drawing tool
2014-03-09 19:44:36 -03:00
Yorik van Havre
6441ca3ef1
Start: minor text correction
2014-03-09 18:50:13 -03:00
Yorik van Havre
274dc09248
Draft: Small fix in hatch patterns
2014-03-09 18:49:35 -03:00
wmayer
0513cf06d3
+ issue #0001049 : Sketcher preferences in preferences editor
2014-03-09 21:44:37 +01:00
wmayer
f0a49e27ae
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-03-09 20:10:12 +01:00
wmayer
b68bb653c8
+ fixes #0001393 : Allow the user to set desired font size in pixels (used by sketcher constraints) in preferences
2014-03-09 18:29:26 +01:00
Yorik van Havre
f0701e6c69
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-03-09 14:09:38 -03:00
Yorik van Havre
bf98d138f2
Start: Fixes in css - issue #1017
2014-03-09 14:07:58 -03:00
wmayer
2aaa63c5eb
+ move sketcher related settings into own page
2014-03-09 18:07:46 +01:00
wmayer
0bcd95416a
+ fixes #0001039 : Add the property PropertyBoolList
2014-03-09 17:10:11 +01:00
wmayer
7430d7d11b
+ fixes #0001309 : Revise Mouse Dialog Edit->Preferences->Display->CAD Navigation->[Mouse]
2014-03-09 15:36:33 +01:00
wmayer
064b5f851c
+ issue #0000953 : No scroll bar on preferences dialog window
2014-03-09 15:04:44 +01:00
wmayer
cea0daa5e6
+ issue #0000953 : No scroll bar on preferences dialog window
2014-03-09 13:03:49 +01:00
wmayer
53816ba779
+ fix typo, fixes #0001310 : Amend tooltip for Sketcher symmetry constraint
2014-03-09 11:17:33 +01:00
wmayer
947a030e37
+ fixes #0001112 : Changing sketch size that contains arcs after padding will create an artifact on bottom side
2014-03-09 11:02:33 +01:00
wmayer
c535b2d330
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-03-08 17:59:51 +01:00
wmayer
f149de10e4
+ fix gcc build
2014-03-08 17:59:22 +01:00
Yorik van Havre
f9c0abc176
Start: better scrolling of the description box - issue #1017
2014-03-08 13:42:18 -03:00
Yorik van Havre
109a961e35
Draft: Fixed bug in Wire-to-Bspline conversion
2014-03-08 13:37:21 -03:00
Yorik van Havre
71bc500aab
Start: more improvements to the start page
2014-03-08 12:37:24 -03:00
wmayer
1f478269af
+ use dialog button box where possible, replace old Python icon
2014-03-08 15:17:56 +01:00
jriegel
7dfa6208ea
remove .DIR directories from install
2014-03-08 09:30:19 +01:00
Yorik van Havre
b6c24cfc35
Arch: minor fixes around Arch & Draft
2014-03-07 20:44:22 -03:00
Yorik van Havre
be33ef6f4c
Draft: added workingplane snap mode - fixes #1461
2014-03-07 15:58:51 -03:00
Sebastian Hoogen
b58d1caea7
OpenSCAD Module: bugfixes and improvements
...
if more than 14 digits are given don round in general,
but test for <eps only.
refine before extrusion
support polyhedron faces which replaces polyhedron faces
importCSG round rotations
don't call Draft.makecircle and makeprism as they trigger a recompute
use group placholder for objects with no children
move removesubtree to OpenSCADUtils
add resize and offset keywords
add OpenSCAD_ExplodeGroup command
add OpenSCAD_IncreaseToleranceFeature
change refine shape logo
2014-03-06 19:41:38 +01:00
wmayer
040c19b1c1
+ relates to #0001421
2014-03-06 16:35:33 +01:00
wmayer
92253429c5
+ fixes #0001463 : setting Vertex.Tolerance modifies bound and shared shapes
2014-03-06 09:50:49 +01:00
wmayer
8e711fc391
+ fixes #0001423 : Crash on draw on face
2014-03-06 09:33:35 +01:00
Yorik van Havre
e99daa4417
Start: Fixed utf8 bug
2014-03-05 11:53:09 -03:00
wmayer
4699856799
+ Add method to get typeid of property via Python
2014-03-05 15:10:37 +01:00
wmayer
5fdb762236
+ work on item 0000494
2014-03-05 13:53:08 +01:00
wmayer
480bf1bfa7
+ fix scale in TopoShapePy
2014-03-05 11:10:55 +01:00
jriegel
246c895d44
Unstable name
2014-03-04 22:15:38 +01:00
jriegel
1dc23a6c23
Delivering VisualStudio runtime with installer
2014-03-04 21:48:27 +01:00
Yorik van Havre
e398f3ee7e
Arch: Fixed SectionPlane direction
2014-03-04 13:51:18 -03:00
Yorik van Havre
2a5c51971e
Arch: temporary workaround to SoBrepFaceSet freeze
2014-03-04 12:51:44 -03:00
wmayer
9367488293
+ fixes #0001312 : Save sheet doesn't write the file in some directories
2014-03-04 10:38:40 +01:00
Yorik van Havre
d632eb2843
Draft: Small fix in trimex
2014-03-03 17:32:48 -03:00
Yorik van Havre
66f6dc6282
Start: Improvements to the Start page - relates to #1017
...
* Removed the videos section
* Added descriptions for feed links
* New cleaner look
* Colors taken from the system
* Feed links open in an external browser
2014-03-03 17:01:18 -03:00
wmayer
c50c30c320
+ fixes #0001330 : Cannot link edge to external geometry
2014-03-03 18:50:43 +01:00
wmayer
170265cd67
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-03-03 18:48:12 +01:00
Yorik van Havre
80f2a3a8a4
Draft: minor fix in Offset
2014-03-03 13:47:29 -03:00
wmayer
874f61e165
+ fixes #0001356 : Error message displays value in Radians (adding reduntant/conflicting angle constraint)
2014-03-03 17:19:33 +01:00
Yorik van Havre
92023533b5
Draft: small fix to clone object
2014-03-03 12:18:54 -03:00
wmayer
afe0bcb727
+ fixes #0001456 : multi select of PartDesign treeview items with their creation sketch, can not then be dragged into a group object
2014-03-03 12:37:44 +01:00
blobfish
4f6b64f252
Part: ModelRefine: Skip conic edges.
...
Extension on Mantis #1450
2014-03-03 10:32:15 +01:00
wmayer
629d5cc1fe
+ fixes #0001318 : Crash when exporting .step file
2014-03-02 18:16:16 +01:00
Sebastian Hoogen
3986c887c3
BrepTools::Dump to string
2014-03-02 14:42:41 +01:00
wmayer
5f7ed33c40
+ improve doc string (for bug 1257)
2014-03-02 13:12:23 +01:00
Sebastian Hoogen
fe0180d6b3
parse keyword arguments in Part::TopoShapePy::makeOffsetShape
2014-03-02 08:56:08 +01:00
wmayer
c50b29004e
+ fixes #0001430 : SegFault when FreeCAD imports textured PLY file
2014-03-01 16:32:29 +01:00
blobfish
7eab688032
Part: ModelRefine: Skip spherical edges for edge fuse.
...
Mantis #1450
2014-03-01 13:15:16 +01:00
blobfish
f8b16e0bbb
Part: CheckGeometry: Adding shape content widget to task
2014-03-01 12:45:54 +01:00
wmayer
7ebfa3632d
+ fixes #0001453 : Use string representation for PropertyPlacement editor that presevers double precision
2014-03-01 12:41:29 +01:00
wmayer
1acba8881d
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-03-01 11:42:06 +01:00
wmayer
de7276421b
0001453: Use string representation for PropertyPlacement editor that presevers double precision
2014-03-01 11:41:42 +01:00
Yorik van Havre
363b62a891
Draft: Fixed PropertyAngles - fixes #1451
2014-02-28 15:53:09 -03:00
Yorik van Havre
810555d2ab
Draft: Small typo fix
2014-02-28 10:05:44 -03:00
wmayer
8f2604a694
+ fixes #0001448 : Newly created python macros don't have an asterisk in their window title.
2014-02-28 11:30:04 +01:00
wmayer
19619c03a0
0001441: entering Transform mode degrades the Placemens rotation to single precision
2014-02-28 11:22:09 +01:00
wmayer
849e39f576
+ Disable debug prints in gear feature, fix JSON error on save and load
2014-02-28 10:21:49 +01:00
wmayer
6b578d13fc
+ Avoid to open two transactions when creating a pad
2014-02-28 10:02:59 +01:00
wmayer
a84abfda39
+ fixes #0001449 : CalculixLib.py not included in ~/src/Mod/Fem/CMakeLists.txt
2014-02-27 23:50:23 +01:00
wmayer
1e2268e8b6
+ PySide migration
2014-02-27 19:15:46 +01:00
WandererFan
b3d1b7a2ea
1443: Fix ShapeString user font selection on Windows
2014-02-27 15:18:18 +01:00
wmayer
a48ec3ce45
+ fixes #0001441 : entering Transform mode degrades the Placemens rotation to single precision
2014-02-27 14:43:07 +01:00
wmayer
daf8b1d49e
+ fixes #0001447 : Crash when opening task dialog for orthographic projection while another task dialog is open
2014-02-27 11:14:53 +01:00
Yorik van Havre
995b146659
Arch: Small fixes around Arch and Draft
2014-02-26 18:01:24 -03:00
wmayer
eed06ccc1d
+ Replace floats with doubles
2014-02-26 16:27:28 +01:00
WandererFan
50883c44f7
Fix spurious "None" on cancel BSpline/BezCurve
2014-02-26 00:03:23 -03:00
wmayer
63f930cb53
+ Added coin add/remove DraggerCallback python functions (guilhemdesq)
2014-02-25 17:43:48 +01:00
wmayer
75e5d5f3ac
+ Fix broken unit tests
2014-02-25 15:24:10 +01:00
Yorik van Havre
9fc0f0d76b
Arch: Fixed test suite - fixes #1442
2014-02-25 10:22:01 -03:00
Yorik van Havre
e2bb30bd47
Arch: small fix to Ifc Explorer
2014-02-24 22:00:13 -03:00
Yorik van Havre
3f99b6ec26
Part: Fixed python representation of Part2DObject - fixes #1387
2014-02-24 16:10:51 -03:00
Yorik van Havre
bab0c366a7
Draft: used distToShape in DraftGeomUtils - fixes 1439
2014-02-24 12:19:36 -03:00
Yorik van Havre
7b92e8fa8e
Draft: Turn Draft BezCurves into faces when closed
2014-02-24 10:56:00 -03:00
wmayer
83caf9d67b
+ detect from Python whether a document is modified, give option to suppress warning from SendMsgToActiveView
2014-02-24 11:30:27 +01:00
Yorik van Havre
49ba4de6b8
Arch: Added BezCurve to Arch WB
2014-02-23 12:04:37 -03:00
WandererFan
515449d324
Cosmetic change - remove "######" placemarkers
2014-02-23 11:54:59 -03:00
Sebastian Hoogen
2dfabfdcb5
Draft Bezier Curve: implemented Continuity Property
...
Draft: allow continuity on closed Bezier curves
Draft: BezCurve bugfixes
- smoothBezCurve
- edit mode
- avoid splitting points into segments as long as degree is zero
- increase the continuity when closing curve
- closed berzier curves
- Catch modifications of continuity of first and last knot on open curves
2014-02-23 11:54:59 -03:00
Sebastian Hoogen
6f8c1c61b7
Draft: added functions to edit tangent or symmetric bezier curves
...
changed icon Draft_BezTanNode
bugfix in Draft BezCurve modifytangentpole
move poles with knots for Bezier Curves with Degree >=3
make bezier curves symmetric/tangent when clicking on poles by
keeping the coordinates of the selected pole
2014-02-23 11:54:58 -03:00
WandererFan
e60a77eb27
Add BezCurve tangent/symmetric buttons to Draft.Edit
2014-02-23 11:54:58 -03:00
Sebastian Hoogen
69b09448d9
Draft Bezier Curves: Add functionality to mockup
...
- Split poles to multiple bezier segments
- set degree of bezier curve
- Close Draft bezier curves
- set Degree at creation
- implement addPoint for piecewise Bezier curves
Draft BezCurve bugfixes
- fix Close button for BexCurve Edit
- fix tracker behaviour in for BezCurve.undoLast
Draft Bezier Curve: use circle trackers for control points
Draft: prepare functions to make bezier knots tangent or symmetric
2014-02-23 11:54:58 -03:00
WandererFan
2d43d61b92
Add Draft Bezier Curve draw & edit mockup using bSpline tools.
2014-02-23 11:54:58 -03:00
wmayer
7eb7591a58
+ Implement alternative to load ui files without using PySide's QtUiTools module
2014-02-22 18:49:22 +01:00
Yorik van Havre
204c37aa59
Fixed a regression in wire.makePipeShell caused by commit d62ed23
2014-02-22 11:01:43 -03:00
Yorik van Havre
9b00c29a5d
Arch: removed some debug output
2014-02-22 11:00:10 -03:00
Yorik van Havre
114ccd2119
Draft: Fixed IsActive methods - fixes #1431
2014-02-22 10:59:28 -03:00
wmayer
e8cb83a48b
+ fixes #0001429 : don't apply booleans on null shapes
2014-02-22 13:06:30 +01:00
blobfish
19f1d974c2
Part: CheckGeometry: Mantis #0001427
...
Store coin referenced pointer instead of viewprovider
2014-02-22 12:13:11 +01:00
wmayer
71253ca631
+ Fix for clang
2014-02-22 11:37:03 +01:00
wmayer
7f307e5200
+ Minor fix in test feature
2014-02-22 11:36:48 +01:00
wmayer
fc8724f0e6
+ Avoid to unnecessarily throw Py::Exception
2014-02-22 11:35:51 +01:00
Yorik van Havre
3bebf0dcea
Fixed Draft utilities menu
2014-02-21 18:16:25 -03:00
Yorik van Havre
ce13d2cbab
Updated sphinx files
2014-02-21 17:53:06 -03:00
Yorik van Havre
3acd9719c5
Arch: fixed Continue mode
2014-02-21 17:52:14 -03:00
Yorik van Havre
a63f4c1f2e
Used new PropertyQuantity API in Draft & Arch - fixes #1414
2014-02-21 12:37:29 -03:00
wmayer
c565cf0c78
+ Handle empty system path in init script
2014-02-21 13:29:22 +01:00
jriegel
565fb8c003
higher level exception handling on Windows
2014-02-20 22:54:30 +01:00
jriegel
2a4e8baa28
fix and test handler for DIVZERO
2014-02-20 20:31:42 +01:00
jriegel
204bff802f
fix commit
2014-02-20 20:08:47 +01:00
jriegel
56d5e193bb
Test case for system exceptions in FeatureTest and try to catch more of them
2014-02-20 20:03:43 +01:00
blobfish
2915712842
Part: CheckGeometry: Mantis #0001426
...
Empty compound throwing exception for bounding box.
2014-02-20 17:46:04 +01:00
Yorik van Havre
7baf1e0971
Draft: small cleanup in draft menu
2014-02-20 11:25:34 -03:00
Sebastian Hoogen
7a7fd33672
OpenSCAD: import surfaces
2014-02-20 11:12:51 -03:00
Sebastian Hoogen
8b2134705a
OpenSCAD: use PropertyQuantity
2014-02-20 11:12:51 -03:00
Sebastian Hoogen
d702911523
OpenSCAD binary gives version info on stderr in never versions
2014-02-20 11:12:51 -03:00
Sebastian Hoogen
103321cff7
Use Part::Mirroing in importCSG
2014-02-20 11:12:51 -03:00
Sebastian Hoogen
0e6b7a629d
OpenSCAD use PythonFeatures for hull and minkowski
2014-02-20 11:12:51 -03:00
Sebastian Hoogen
de038b327f
OpenSCAD: igonre cylinder with negative height
...
and bugfix in mesh import
2014-02-20 11:12:51 -03:00
wmayer
e26735d354
+ Fix for OCC 6.6
2014-02-20 10:33:09 +01:00
blobfish
f51ffa62f3
Part: CheckGeometry:
...
adding build entry name for dialog
add bounding box to all entries
fixed the positioning of bounding box
removal of object hierarchy. boost function dispatch
add BOPAlgo_ArgumentAnalyzer
2014-02-19 18:16:08 -05:00
jriegel
bb98b5afb0
Improve runing the Calculix process
2014-02-18 22:07:46 +01:00
wmayer
e5eecc41dd
+ Update Material resource file
2014-02-18 14:00:11 +01:00
Cercos-Pita J.L
9040278c0d
Modified the resources used tool
2014-02-18 10:47:50 +01:00
Cercos-Pita J.L
e94a68c828
Cleared non-updated tools
2014-02-18 10:16:56 +01:00
Cercos-Pita J.L
6edfd09dcb
Cleared unused icons
2014-02-18 10:13:13 +01:00
Cercos-Pita J.L
4169d4f788
Regenerated the branch
2014-02-18 10:08:12 +01:00
wmayer
28b5d77408
+ Set const attribute to Python binding of TopoFace where needed
2014-02-17 17:19:14 +01:00
wmayer
efdbe4659a
+ fixes #0001418 : Base::Matrix4d can't invert rotoinversion
2014-02-17 16:42:28 +01:00
wmayer
81cbd2643f
+ draw additional dashed line in brush tool
2014-02-17 15:27:59 +01:00
wmayer
d3760deeeb
+ fixes #0001388 : SIGSEGV in Part::GeometryCurvePy::toBSpline
2014-02-17 11:40:09 +01:00
WandererFan
0f9001a3f5
Handle non-Ascii in ShapeString SStringValue
2014-02-17 10:48:56 +01:00
wmayer
8de258dded
+ Fix compiler warning
2014-02-17 10:45:23 +01:00
WandererFan
ea0e7bed89
revise Part.distToShape return value format
2014-02-17 10:34:14 +01:00
WandererFan
dcc4839968
Add Part.distToShape()
2014-02-17 10:34:13 +01:00
jriegel
6d1d55dc15
Implement the python gear feature
2014-02-16 22:19:59 +01:00
jriegel
1d5cfbc9cc
PropertyUnits takes Unicode python strings
2014-02-16 22:19:58 +01:00
jriegel
5c3187da85
Fix not set optional python parameter
2014-02-16 22:19:57 +01:00
jriegel
0fbe570f9e
switch the physical Properties to Quantity and add Pressure and Force
2014-02-16 22:19:56 +01:00
jriegel
587f6b220b
add fcgear
...
http://forum.freecadweb.org/viewtopic.php?f=9&t=5703
2014-02-16 22:19:55 +01:00
jriegel
c9c24cf0b6
small fix
2014-02-16 22:19:54 +01:00
wmayer
bccd10a9ea
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-02-16 18:02:35 +01:00
wmayer
fb994e204c
+ fixes #0000854 : Ability to change number of digits to the right of decimal place in spinboxes
2014-02-16 18:02:09 +01:00
jriegel
89ea7ad268
using QProcess for starting Calculix
2014-02-16 14:33:55 +01:00
jriegel
aa6bafa222
fix for reset the color information on changing the base mesh
2014-02-16 14:33:47 +01:00
wmayer
2d511524ac
+ Set number of deciamls with GUI
2014-02-16 12:39:03 +01:00
wmayer
1be3308c21
+ fixes #0001413 : Part.Shape.transformGeometry on Null Shape causes SIGSEGV
2014-02-15 19:54:15 +01:00
wmayer
cc033f8d30
+ allow to set constraints of properties via Python
2014-02-15 14:10:17 +01:00
wmayer
23d8820582
+ Fix segmentation fault
2014-02-15 14:08:33 +01:00
Sebastian Hoogen
d46fcf08b1
OpenSCAD Module: Adds support for Frustum and fixes minor bugs
2014-02-14 14:43:29 -02:00
wmayer
3ce05cd4ff
+ fixes #0001410 : Base::Quantity::getValueAs does not properly check the dimension
2014-02-14 17:14:39 +01:00
wmayer
e08635b1e8
+ fixes #0001413 : Part.Shape.transformGeometry on Null Shape causes SIGSEGV
2014-02-14 15:02:26 +01:00
wmayer
a3056b9d32
+ fixes #0001409 : implement FreeCAD.Units.Quantity().__float__()
2014-02-14 14:50:01 +01:00
wmayer
89b5d7e6f1
+ extend number protocol
2014-02-14 13:53:47 +01:00
wmayer
e916d65a5c
+ extend number protocol
2014-02-14 13:45:56 +01:00
wmayer
98bab1ebbe
+ extend number protocol
2014-02-14 12:46:30 +01:00
wmayer
5b9f076c53
+ remove unneeded methods from PropertyLength
2014-02-13 17:24:03 +01:00
wmayer
65d001f3d4
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-02-13 17:04:14 +01:00
wmayer
893a5d3a86
+ PropertyLength inherits PropertyQuantity
2014-02-13 17:03:48 +01:00
Yorik van Havre
478772f067
Draft: small fix in point object
2014-02-13 12:19:59 -02:00
wmayer
37f283e7d7
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-02-13 14:08:34 +01:00
wmayer
989b6a06bd
+ Proper reimplmentation of PropertyUnitItem
2014-02-13 14:08:08 +01:00
Yorik van Havre
e374ba9873
Draft: prevent other Draft objects from becoming Support
2014-02-13 10:04:06 -02:00
Yorik van Havre
5043125bb0
Arch: small bugfix in window
2014-02-13 10:03:45 -02:00
logari81
4d918d1f8f
Sketcher: fix polyline closing when coincident points are involved
2014-02-12 22:23:43 +01:00
jriegel
9c8df98c9f
Implementing Calculix binding
2014-02-12 19:39:49 +01:00
wmayer
6f2f417976
+ Fix undo/redo issue with pad
2014-02-12 16:15:24 +01:00
wmayer
e9b275c7e6
+ support loading projects with old pad features, fix critical bug where the unit gets replaced
2014-02-12 15:14:02 +01:00
wmayer
22f3f85584
+ emit valueChanged(double) signal from InputField
2014-02-12 14:03:42 +01:00
wmayer
37ffd4ac34
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-02-12 13:37:37 +01:00
wmayer
9c2dbc1498
+ fix whitespace, typos, docs
2014-02-12 13:37:04 +01:00
Yorik van Havre
57d45928e4
Arch: improvements to survey tool
2014-02-12 09:39:07 -02:00
wmayer
02566f721b
+ fixes #0001400 : Revert back to using native file dialog on Mac OS X
2014-02-12 10:50:02 +01:00
jriegel
29e6610ab8
Writing Calculix file
2014-02-12 00:15:57 +01:00
jriegel
82ff64477e
FixBug #1402
2014-02-11 23:03:26 +01:00
jriegel
24b06ad3db
Calculix Analysis output
2014-02-11 19:49:47 +01:00
Yorik van Havre
f7d90bc789
Arch: Survey tool
2014-02-11 16:30:16 -02:00
wmayer
1cf7da2b6d
+ Add PropertyQuantity to type system
2014-02-11 19:20:31 +01:00
wmayer
9b0d24345f
+ Using locale delimiter
2014-02-11 17:36:04 +01:00
Yorik van Havre
43a665451d
Arch: added a pref option to disable snapping to the base object (restores normal snapping for arch objects)
2014-02-11 11:17:39 -02:00
jriegel
f8e49be141
Added new color types to Preferences
2014-02-10 21:25:54 +01:00
jriegel
9af9283d19
Using Locale delimiter
2014-02-10 21:25:53 +01:00
Yorik van Havre
b99cfa0fbb
Draft: small fix in DXF exporter
2014-02-10 17:09:46 -02:00
Yorik van Havre
c260ede083
Arch: option to save a list of exported objects together with an ifc file - fixes #1371
2014-02-10 12:54:27 -02:00
wmayer
d81803de05
+ fixes #0001380 : Allow to set user-defined names for constraints
2014-02-10 15:36:58 +01:00
jriegel
ad0db9f4c5
Further implementing MechanicalAnalysis
2014-02-09 21:40:46 +01:00
jriegel
d17fb3aa5d
First tests of using InputField via Python
2014-02-09 20:50:07 +01:00
jriegel
58fda26298
Fix doulbe value entry in history of InpuField
2014-02-09 19:28:15 +01:00
jriegel
893f330043
Fix default bug in Pad dialog
2014-02-09 19:21:01 +01:00
jriegel
cd69467ede
Finish get nodes by surface
2014-02-09 17:55:35 +01:00
jriegel
1341c43e5f
Get node of face implementation
2014-02-09 17:55:34 +01:00
Yorik van Havre
1ec10333f2
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-02-09 13:33:09 -02:00
WandererFan
9d235d7fb9
Avoid OCC error for closed Draft.BSpline with same first/last points
2014-02-09 13:30:49 -02:00
jriegel
a97f53a5e7
Fully implement Units in PartDesign Pad
2014-02-09 16:23:06 +01:00
jriegel
3f9642136c
Merge remote-tracking branch 'refs/remotes/s7726-repo/PadToolDatum'
2014-02-09 16:23:05 +01:00
Yorik van Havre
99902b22b7
Draft: made last commit more backward-compatible
2014-02-09 13:08:02 -02:00
Daniel Falck
9ede51b2f6
added way of breaking BSplines into line segments in Shape2DView
2014-02-09 13:02:38 -02:00
wmayer
4fb000f0c8
+ expose zoomIn/zoomOut to Python
2014-02-09 15:28:43 +01:00
logari81
fa33bcae4a
+ fixes #0000928 : Change selection numbering base in the Sketcher from 0 to 1
2014-02-08 23:51:15 +01:00
wmayer
49155648cb
+ Add pipette icon
2014-02-08 16:10:16 +01:00
Gavin Swanson
a40a5dd12d
Add fancy unit/math input to pad tool
...
Pad tool does not currently save the units, so the result is still in mm.
2014-02-07 22:10:31 -08:00
Yorik van Havre
4e722e2cda
Arch: IFC browser - fixes #1384
...
Arch -> Utilities -> IFC Explorer
This opens a browser window that displays the contents of an IFC file
in a more readable manner than a text editor.
2014-02-07 10:57:34 -02:00
jriegel
70091e57c2
First version of new Windows installer
2014-02-06 23:10:28 +01:00
Yorik van Havre
8ebf4ebf45
Included freecad-doc icon in resource
2014-02-06 15:11:38 -02:00
Joshua Christopher
0af6f52369
Set enable-disable states for Reversed checkbox
2014-02-05 15:41:35 -02:00
Joshua Christopher
165a4e530a
Added a reversed checkbox.
2014-02-05 15:41:35 -02:00
wmayer
75f7ebc346
+ add default directories to check for translation files
2014-02-05 14:54:14 +01:00
Yorik van Havre
2ee101dee3
Draft: fixed draft scale again - fixes #1385
2014-02-04 16:08:09 -02:00
Sebastian Hoogen
e1931f066f
Draft SVG export: fix viewbox for raw output
2014-02-04 15:44:35 -02:00
wmayer
ca00665421
+ fixes #0001380 : Allow to set user-defined names for constraints
2014-02-04 18:32:05 +01:00
Yorik van Havre
bba8760b11
Draft: fixed a bug in Draft Scale
2014-02-04 09:44:50 -02:00
wmayer
1441021541
+ fixes #0001380 : Allow to set user-defined names for constraints
2014-02-03 14:45:41 +01:00
jriegel
9a2fab28d2
BugFix and error reporting
...
* Fix a bug if the macro path is invalid
* reporting exeptions if somethings fail in the Draft core modules init
2014-02-02 21:25:02 +01:00
wmayer
d927d0bcb9
+ improve handling of default colors of report view and Python console when using style sheets
2014-01-31 11:34:30 +01:00
Yorik van Havre
a7d297c33d
Draft: Fixed a bug in intersection snapping with arcs
2014-01-28 19:15:09 -02:00
wmayer
06e77239e6
+ fix minor error
2014-01-28 17:19:01 +01:00
wmayer
5de7738709
+ fixes : #0001369 : Part::TopoShape::getMemSize fails for Bezier Curves
2014-01-28 11:29:21 +01:00
Yorik van Havre
36bcc580d6
Draft: fixed bug in dimensions direction
2014-01-27 13:51:10 -02:00
Yorik van Havre
c3e8a1579b
Draft: applied ulrich1a's fix to svg output - fixes #1365
2014-01-26 20:32:35 -02:00
Yorik van Havre
69cc7ec901
Arch now works in console mode - fixes #1362
2014-01-26 20:13:50 -02:00
wmayer
ce8efb118c
+ Add new icons, fix German translation in Points module
2014-01-26 16:19:07 +01:00
wmayer
30768c9519
+ proper encoding of custom toolbar names
2014-01-26 16:02:22 +01:00
wmayer
d39afd36c2
+ Add module name to Raytracing command
2014-01-26 16:01:37 +01:00
wmayer
4b49178920
+ Fix usage of Pivy from old LibPacks
2014-01-26 14:19:15 +01:00
wmayer
28f260438e
+ Fix doc string
2014-01-26 14:18:30 +01:00
wmayer
0da6de629d
+ fixes #0001364 : Issue 1256 is not actually fixed
2014-01-24 13:54:57 +01:00
wmayer
340d6da086
+ Various improvements on units calculator
2014-01-23 09:50:16 +01:00
wmayer
7506e740e0
+ Use application icon as default workbench name
2014-01-22 17:35:10 +01:00
wmayer
698899e6d7
+ Fix limits in tessellation panel
2014-01-22 15:42:18 +01:00
wmayer
cd5977b721
+ fixes #0001289 : Fit All option has not animation when Enable animation is active
2014-01-21 15:49:18 +01:00
wmayer
6c6340312c
+ Resort edit nodes of sketch view provider
2014-01-19 18:34:47 +01:00
wmayer
31a96aff9f
+ Show also name of Inventor nodes in Scene Inspector
2014-01-19 18:34:05 +01:00
Yorik van Havre
4a8b5cc60e
Draft: fixed small bug in bezier-to-svg code
2014-01-19 09:49:17 -02:00
wmayer
cf1e4ecd4f
+ fixes #0001325 : PushButtons in TaskPanel too small
2014-01-18 13:37:34 +01:00
Sebastian Hoogen
9c5f1c216d
Drawing: approximate rational splines and enforece only GeomAbs_C0
2014-01-18 11:50:57 +01:00
wmayer
20c739d5ee
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-01-18 00:08:41 +01:00
wmayer
0cbbfea23b
+ Shared library of Mefisto2F
2014-01-18 00:08:25 +01:00
Yorik van Havre
843838ec19
Draft: Added shoogen's fix to bspline to svg stuff
2014-01-17 09:40:48 -02:00
wmayer
98cef33d61
+ Approximate curve to B-Spline
2014-01-17 10:53:13 +01:00
Yorik van Havre
47d5c615d9
Draft: Added direction vector to dimensions
2014-01-16 17:13:21 -02:00
Yorik van Havre
13bccea8a1
Arch: Added blondel ratio to stairs
2014-01-16 16:32:05 -02:00
Yorik van Havre
99e05a3236
Draft: Added a decimals property to Draft Dimensions
2014-01-16 16:18:46 -02:00
Sebastian Hoogen
e99216189c
importCSG: add empty compounds for elemets with size 0
2014-01-16 15:41:16 -02:00
Yorik van Havre
21d736d21f
Arch: Added landings to arch stairs
2014-01-16 14:21:58 -02:00
wmayer
7813c5e5ed
+ Fix regressions by merge of draw style branch
2014-01-16 14:30:42 +01:00
wmayer
0575915815
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-01-16 14:04:52 +01:00
wmayer
08698154c8
+ fixes #0001266 : Part Common fails with two surface objects
2014-01-16 14:04:19 +01:00
Yorik van Havre
0972be8e72
Merge of tanderson-viewoverride4 branch
2014-01-16 10:27:21 -02:00
tanderson
46c1f7835c
adding to menus and toolbars
2014-01-16 10:27:21 -02:00
tanderson
6f91426930
adding drawstyle icons
2014-01-16 10:27:21 -02:00
tanderson
3b8176535b
implemented
2014-01-16 10:27:21 -02:00
wmayer
795bd01f31
+ fixes #0001148 : Incorrect STL from a mesh
2014-01-16 11:55:32 +01:00
Yorik van Havre
828c4618aa
Draft: small bugfix
2014-01-15 19:49:43 -02:00
Yorik van Havre
e8ab9bd2e0
Draft: added a debug message to bspline-to-svg conversion
2014-01-15 19:41:33 -02:00
Sebastian Hoogen
e9201cc9d6
support curves in Draft.getSVG()
...
curves with a degree<=3 will be converted to bezier segments
curves with a higher degree are discretized
2014-01-15 22:22:40 +01:00
jriegel
5a4b4da59f
Fix for Python binding in FEM result objects
2014-01-15 19:33:44 +01:00
Sebastian Hoogen
15089556cd
Updated ISO7200 based drawing templates
...
added Working space and Title block tags
2014-01-15 12:03:55 -02:00
Yorik van Havre
5e7c5a2bfb
Arch: removed degug messages in collada importer
2014-01-15 12:01:57 -02:00
Yorik van Havre
0b945388ea
Added icon-based feedback for InputField
2014-01-15 11:48:16 -02:00
Yorik van Havre
5556d1506e
Draft: small unicode bugfix
2014-01-15 10:44:05 -02:00
Yorik van Havre
9fdf3f64ad
Arch: Add a pref option to disable auto wall-merge
2014-01-14 17:02:16 -02:00
Yorik van Havre
e352e169da
Arch: Automatic wall height - fixes #980
...
+ Walls can now be capped by roofs, by subtracting a roof from them
+ Walls and Structs with height = 0 take height from their parent floor
+ Changing the placement of a floor changes all the placements of its children
2014-01-14 16:16:04 -02:00
Yorik van Havre
e14a9e49d9
Arch: Refactored Stairs code for easier extension
2014-01-14 15:12:08 -02:00
wmayer
b1a1be6f4e
+ workaround for strange behaviour of Qt 4.8 regarding period/colon
2014-01-14 13:50:13 +01:00
wmayer
7eeebbed53
fixes #0001191 : Cannot manipulate length if moved away from between the 'red lines'
2014-01-14 11:48:34 +01:00
Yorik van Havre
6245957478
Draft: Fixed utf8 bug in shapestring
2014-01-14 00:36:59 -02:00
Yorik van Havre
96ff9e37c2
Draft: Fixed Draft edit again! (better this time...)
2014-01-13 17:54:45 -02:00
Yorik van Havre
c1aea6337c
Draft: Fixes in Draft edit
2014-01-13 14:12:28 -02:00
wmayer
ca3b87a719
+ Rename methods
2014-01-12 21:42:46 +01:00
wmayer
99d10a6e49
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-01-12 18:49:24 +01:00
wmayer
0f6ccf11bf
+ Projection of edges and wires
2014-01-12 18:48:55 +01:00
jriegel
3cbc877f6b
fix some warnings
2014-01-12 16:25:47 +01:00
jriegel
33248f756f
Merge branch 'refs/heads/j-downsett-orthos_finished'
...
Conflicts:
src/Mod/Drawing/Gui/TaskOrthoViews.cpp
2014-01-12 16:23:03 +01:00
jriegel
3f52b88c5b
Fix for Windows
2014-01-12 16:21:07 +01:00
Jose Luis Cercos-Pita
11278f34f3
rebased (regenerated) branch from master
2014-01-12 15:07:19 +01:00
wmayer
d97feb01cd
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-01-11 15:00:14 +01:00
wmayer
1b9f4e7b7a
+ fixes #0001350 : error on line 1507 at column 1: Encoding error - Not possible to create a drawing in french language
2014-01-11 14:59:51 +01:00
Yorik van Havre
88c5045368
Arch:workaround for horizontal extrusions in IFC export
2014-01-11 11:55:42 -02:00
jriegel
6078846fa2
Increase Performance Postprocessing
2014-01-11 14:50:22 +01:00
jriegel
c71c1b8679
Improving Post-Processeing performance
2014-01-11 14:50:08 +01:00
Sebastian Hoogen
a7b16c5748
0001349 recognize remote branches for Version.h in detached head state
2014-01-11 13:37:36 +01:00
Yorik van Havre
cc9c9dfcf4
Draft: fixed message containing PyQt
2014-01-10 17:55:03 -02:00
wmayer
ffbca2bdff
+ Fix in ui loader
2014-01-10 14:22:30 +01:00
j-dowsett
83c9017eff
Rewrite of OrthoViews. Detect page size and titleblock from tags in SVG template. Separation of logic from GUI. Much improved logic. No longer uses python to manipulate views - calls C++ methods directly. Can now support more views, and axonometric views in any position.
2014-01-10 11:33:34 +00:00
j-dowsett
c1a2348e33
Applying tanderson's patch to replace invertY with (1,-1) scaling of SVG itself. Commented out invertY as no longer used.
2014-01-10 11:31:14 +00:00
wmayer
270d25658d
+ Prepare PySide to work with custom widgets
2014-01-09 23:49:41 +01:00
Yorik van Havre
d00327640a
Switched TemplatePyMod scripts to PySide
2014-01-09 18:46:16 -02:00
Yorik van Havre
f73a3d6b8a
Spreadsheet: switched to pyside
2014-01-09 18:23:39 -02:00
Yorik van Havre
e3cb403b39
Draft: fixed ultra-condensed toolbar
2014-01-09 18:14:31 -02:00
wmayer
3395a32738
+ Fix translation issue in StartPage
2014-01-09 16:08:13 +01:00
wmayer
984c723557
+ Add method loadUi to PySideUic
2014-01-09 15:26:07 +01:00
wmayer
54334ca69d
+ Migrate Fem to PySide
2014-01-09 13:36:29 +01:00
wmayer
e32b747fce
+ Add PySideUic helper module
2014-01-09 13:35:42 +01:00
Yorik van Havre
955d1cc6dc
OpenSCAD: Recompiled rc file with pyside
2014-01-09 10:17:35 -02:00
Sebastian Hoogen
89a028f4a8
Port OpenSCAD WB to PySide
2014-01-08 23:30:57 -02:00
Sebastian Hoogen
7e79a6d303
fixes #0001306 : use Part_RegularPolygon in exportCSG
2014-01-08 23:30:57 -02:00
wmayer
12d1d80525
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-01-08 22:49:56 +01:00
wmayer
367d828030
+ Update instructions for Mefisto2f build on Win x64
2014-01-08 22:49:19 +01:00
jriegel
9a702d20cf
some fixes
2014-01-08 19:37:47 +01:00
wmayer
9a7132b467
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-01-08 12:55:30 +01:00
wmayer
80f166bbf7
+ Allow to get/set x/y axes of circle
2014-01-08 12:54:45 +01:00
jriegel
50492a5f5f
STEP parser writes GraphViz files
2014-01-07 23:30:00 +01:00
jriegel
7d06fc0136
further implement SimpleReader
2014-01-07 23:29:59 +01:00
wmayer
1f8c2e8f2c
+ Fix target name
2014-01-07 21:13:41 +01:00
wmayer
dd9697dbad
+ Implement a lightweight TCP server
2014-01-07 18:37:59 +01:00
wmayer
19c6105389
+ Implement a lightweight TCP server
2014-01-07 17:56:20 +01:00
Yorik van Havre
19865c252b
Fixed translation system in Arch & Draft
2014-01-07 11:17:31 -02:00
wmayer
c19e42cb7b
+ Read/Write FreeCAD website urls from/to user.cfg
2014-01-07 13:39:56 +01:00
wmayer
4cd8cb6eb0
+ Copy material editor UI file
2014-01-07 10:41:37 +01:00
Yorik van Havre
0f2c93a25e
Small fix in Material editor
2014-01-06 17:37:59 -02:00
Yorik van Havre
14f2dd2331
Switched Material module to pyside
2014-01-06 17:10:34 -02:00
jrheinlaender
2954d9a960
Port of WizardShaft to PySide
2014-01-06 16:21:09 -02:00
Yorik van Havre
1d709ade42
Switch to PySide (+ Arch, Draft & Start)
2014-01-06 13:26:49 -02:00
Yorik van Havre
e9711ec7c9
Arch: fix in collada importer
2014-01-06 11:42:12 -02:00
wmayer
97ad018bd7
+ Rename to offsetFaces
2014-01-06 13:08:00 +01:00
wmayer
94a8b0d215
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-01-06 12:30:30 +01:00
wmayer
5d1960d3ac
+ Extrude subset of faces of a solid
2014-01-06 12:29:58 +01:00
jriegel
51b640c91a
start implementing SimpleReader
2014-01-06 11:26:16 +01:00
jriegel
4be052af48
StepShape class and python binding for handling STep-Shape transfers.
2014-01-05 22:31:16 +01:00
jriegel
e17090fadd
add SCL python files
2014-01-05 22:31:15 +01:00
Yorik van Havre
3648912e24
Arch: small bugfix in windows
2014-01-05 17:10:10 -02:00
wmayer
1820a56094
+ Allow access to tab panel of combo view
2014-01-05 11:36:58 +01:00
wmayer
27315d4c1e
+ Allow access to tab panel of combo view, fix some typos
2014-01-05 11:32:18 +01:00
wmayer
33e6c39f8a
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-01-05 11:26:43 +01:00
wmayer
847b6b79e0
+ Replace math.h with cmath
2014-01-05 11:25:40 +01:00
Yorik van Havre
9c3d1a80d4
Draft: allow makePoint to take a vector
2014-01-04 22:07:30 -02:00
Yorik van Havre
eceebf4d71
Arch: Fixes to ifc importer to make it compatible with ifcopenshell 0.4
2014-01-04 11:30:15 -02:00
wmayer
716629006c
+ fixes #0001345 : orient solids
2014-01-04 13:50:53 +01:00
wmayer
3c6bc1eaea
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-01-04 12:59:35 +01:00
wmayer
e91e3b241f
+ Patched applied to fix flipped arcs when adding as external geometry
2014-01-04 12:59:07 +01:00
jriegel
cb63cba061
Further implementation of Post-Processing
2014-01-03 17:30:49 +01:00
wmayer
88f1c2c180
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2014-01-02 15:33:04 +01:00
wmayer
e5965a4596
fixes #0001333 : Extruding a shape 'MyShape' should call solid 'Extruded from MyShape'
2014-01-02 15:32:42 +01:00
jriegel
80fe8bc000
Build fixes
2014-01-02 15:09:10 +01:00
Yorik van Havre
72797fa395
Arch: Fixed small bug happening when opening older files
2014-01-02 11:53:55 -02:00
wmayer
18c62a52af
+ comment out non-existing Python module in FEM workbench
2014-01-02 13:59:53 +01:00
wmayer
68c8d98e4b
+ fixes #0001334 : Applying extrude does not close the task
2014-01-02 13:53:53 +01:00
Yorik van Havre
d5ed1b1b65
Draft: Added raulshc's patch to importDWG + minor fix
2014-01-01 19:50:39 -02:00
Yorik van Havre
eab159b6ee
Drawing: Added property to set hidden line width - fixes #606
2014-01-01 14:41:39 -02:00
Yorik van Havre
2bc15af126
Draft: bugfix in offset - fixes #270
2014-01-01 13:59:44 -02:00
Yorik van Havre
f3a4c36155
Arch: use unicode in task panels - fixes #1338
2014-01-01 13:39:54 -02:00
Yorik van Havre
f4254b9e0b
Draft: Fixed bug in custom svg patterns
2014-01-01 12:20:24 -02:00
jriegel
f92d310ac3
Start Gui for Displacement Post-Processing
2013-12-31 17:16:51 +01:00
wmayer
a1c5d981a5
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2013-12-31 14:57:21 +01:00
Jonathan Hahn
7ab2d7ec49
improves airfoil import
2013-12-31 11:25:16 -02:00
blobfish
3ab5a5f024
Expanded build control: module cmakelists changes
2013-12-31 14:14:11 +01:00
jriegel
efc311f908
Postprocessing: Color per Element at FemMesh
2013-12-31 13:52:13 +01:00
wmayer
9503ad0e1f
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2013-12-31 13:26:14 +01:00
wmayer
69521bdfbd
+ fixes #0001341 : more visual feedback for check geometry command
2013-12-31 13:25:49 +01:00
jriegel
226c25f9d9
Finish loading Calculix result files
2013-12-31 12:41:22 +01:00
jriegel
c1a3b1434a
Read Calculix Result files (*.frd) mesh
2013-12-30 22:33:05 +01:00
jriegel
360b190f03
group for Material project
2013-12-30 19:03:40 +01:00
wmayer
020181a96c
+ Fix typo
2013-12-30 12:57:08 +01:00
wmayer
365099a2bd
+ Keep trailing digits when loading project file
2013-12-30 12:54:45 +01:00
wmayer
775e6eba4f
+ Use long helix function in parametric feature
2013-12-29 14:51:25 +01:00
WandererFan
acb8210c96
Add Part.makeLongHelix to work around Mantis #0954
2013-12-29 13:53:01 +01:00
wmayer
a018b50ac2
+ Show horizontal scrollbar if needed
2013-12-29 13:40:44 +01:00
wmayer
5b665418bb
+ Avoid too lenthy object names in document
2013-12-29 11:38:12 +01:00
wmayer
c1d14eab3c
+ Fix OCC 6.7 build failure
2013-12-28 12:22:31 +01:00
wmayer
d77d672cfb
+ Fix docstring for addSelection
2013-12-27 11:07:16 +01:00
Yorik van Havre
7ceef577a2
Arch: Added IFC export to the GUI + using new ifcopenshell for import - fixes #1005
2013-12-26 11:38:30 -02:00
wmayer
a2cba17d3f
+ Fix constness attribute for TopoEdge and TopoWire
2013-12-25 13:48:17 +01:00
Yorik van Havre
60ec4e644a
Draft: Added Jim's Array icon
2013-12-24 10:09:39 -02:00
wmayer
c304c71b93
fixes #0001337 : Add american templates to Drawing workbench 'New Drawing' drop-down button
2013-12-24 12:39:15 +01:00
Yorik van Havre
46b1987fb9
Arch: small fix in Arch Frame
2013-12-23 14:41:32 -02:00
wmayer
b2a341540e
+ Changes to modelRefine (jrheinlaender)
2013-12-23 16:53:27 +01:00
wmayer
3b78d67b3b
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2013-12-23 13:46:40 +01:00
wmayer
c8e5909a8a
+ Icon for shape refinement
2013-12-23 13:46:15 +01:00
Yorik van Havre
163340392f
Raytracing: Added aspect ratio to POV output - fixes #1315
2013-12-22 20:18:19 -02:00
Yorik van Havre
90a80da1cd
Arch: Frame object - fixes #1166 , #1314
2013-12-22 17:18:11 -02:00
blobfish
d83cec2be2
Part: Changes to dimension
...
move 2 icons to main gui
enable and disable stepped buttons
move reset dialog to control widget
only dimension 1 linear solution
2013-12-22 17:31:10 +01:00
wmayer
58b1a0947f
+ Support to write out mesh name
2013-12-22 15:02:40 +01:00
Yorik van Havre
970f9c193d
Arch: small bugfix to ifc exporter
2013-12-21 19:53:39 -02:00
Yorik van Havre
c2b0c4aeb8
Arch: added a couple of useful properties to Site object
2013-12-21 19:53:07 -02:00
Yorik van Havre
6378761895
Draft: Small bugfix in dxf importer - fixes #1317
2013-12-21 19:45:00 -02:00
jriegel
152ecf2df9
More choices in Sketcher grid and later switching to um
2013-12-21 19:15:28 +01:00
wmayer
eaebae18f0
+ Fix boolean operation panel
2013-12-21 18:23:45 +01:00
jmaustpc
236055aa52
Add Mesh Regular Solids icons to dialogue drop down list
2013-12-21 21:54:56 +11:00
Yorik van Havre
b8a8f186cb
Arch: Still more fixes to ifc export...
2013-12-20 23:39:46 -02:00
Yorik van Havre
8db8db4a39
Arch: more bugfixing in ifc exporter
2013-12-20 19:41:58 -02:00
Yorik van Havre
bdb5eefd72
Draft: Fixed bugs in hatching - fixes #1164
2013-12-20 19:12:22 -02:00
wmayer
ca4d0d7027
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2013-12-20 16:28:38 +01:00
wmayer
098f39e7c5
+ Use new icons in Mesh workbench
2013-12-20 16:28:14 +01:00
Yorik van Havre
55c0253cd9
Arch: added workarounds for export bugs in ifcopenshell
2013-12-20 13:25:41 -02:00
Yorik van Havre
5224e9a2ba
Arch: Further work on the IFC exporter, now supports windows and bldg hierarchy
2013-12-19 20:41:42 -02:00
jriegel
50a2c1afaf
additional places for measurement commands
2013-12-19 22:02:40 +01:00
jriegel
3f4f5c8c02
Merge branch 'refs/heads/tanderson-rev-partdimension'
2013-12-19 21:36:57 +01:00
blobfish
109729e15e
adding toggle and clear to context, view menu
2013-12-19 10:18:50 -05:00
jriegel
246f8b70f0
Merge branch 'refs/heads/j-downsett-drawing'
2013-12-18 23:11:02 +01:00
jriegel
98f0918bec
fixes for windows
2013-12-18 22:49:58 +01:00
jriegel
253910ec36
small fix
2013-12-18 18:19:25 +01:00
jriegel
9c1c94c64e
fix radius bug and add new imperial sketch grid cascading...
2013-12-18 18:18:39 +01:00
Yorik van Havre
9baf73c52f
Arch: Several minor bugfixes
2013-12-18 10:34:24 -02:00
blobfish
4f6a82c3bc
adding some headers
2013-12-17 22:54:40 -05:00
Yorik van Havre
990ece8ce8
Arch: More work on the IFC exporter
2013-12-17 19:47:04 -02:00
Yorik van Havre
df596822a5
Arch: added ifc writer
2013-12-17 16:44:08 -02:00
blobfish
840df00014
Part Dimension: new icons
2013-12-17 10:05:54 -05:00
blobfish
442c79bf5c
Part Dimension: new implementation files
2013-12-17 10:05:54 -05:00
blobfish
59e69bbe0e
Part Dimension: alterations to existing files
...
Not sure what is happening with View3dInventorViewer.h.
The only REAL change, beyond the addition of dim functions, is
the removal of the member arrowrotation. It wasn't referenced anywhere.
2013-12-17 10:05:46 -05:00
wmayer
32134f64f0
+ Fix build failure with gcc
2013-12-17 10:58:04 +01:00
jriegel
53f74153ea
Imperial Sketcher grid in Dialog
2013-12-16 15:09:43 +01:00
jriegel
182eaebc21
next gcc fix
2013-12-16 00:38:46 +01:00
jriegel
112a672fec
Fix another one....
2013-12-16 00:26:47 +01:00
jriegel
e7e0bbfbe5
Try to fix std::abs() error...
2013-12-16 00:20:47 +01:00
jriegel
03c40f949c
fix QString header in Unit
2013-12-16 00:07:18 +01:00
jriegel
73684a9fdb
fix negative value cascading in unti schemas
2013-12-16 00:02:58 +01:00
jriegel
9d217367e9
Mouse wheel handling in InputField
2013-12-16 00:02:31 +01:00
jriegel
d5d9ea9c30
Add unti support to Sketcher
2013-12-15 22:47:47 +01:00
Yorik van Havre
2b10890a04
Arch: Structural nodes - closes #1313
2013-12-15 17:45:12 -02:00
Yorik van Havre
c6fbcbe086
Arch: added alternative load mode for IFC files for benchmarking
2013-12-15 17:43:34 -02:00
Yorik van Havre
45c4c695a1
Arch: added structural roles to Ifc import
2013-12-15 11:27:18 -02:00
j-dowsett
7348d0d497
Added manual scaling to axonometric view
2013-12-15 11:26:54 +00:00
j-dowsett
7d159360c4
Correctly identify standard template files
2013-12-15 11:26:54 +00:00
j-dowsett
ad9c33b9d6
Correctly enables/disables axonometric tab when axonometric view added/removed.
2013-12-15 11:26:54 +00:00
j-dowsett
fe5884aa85
Fixed overwriting of axo view when ortho views changed.
2013-12-15 11:26:54 +00:00
j-dowsett
88c1ae6a24
Fix to axonometric projection for objects not centred at y = 0
2013-12-15 11:26:53 +00:00
j-dowsett
ce5fad80dd
Added functionality for axonometric views in orthogrpahic projection tool
2013-12-15 11:26:53 +00:00
Yorik van Havre
6e01e6c6e5
Arch: prep work for IFC export
2013-12-13 18:50:38 -02:00
jmaustpc
9bdd15f7b5
Move Mesh_Mesh_from_Shape icon from Mod/MeshPart to Mod/Mesh
...
Move the icon Mesh_Mesh_from_Shape.svg
from .../Mod/MeshPart/Gui/Resources/icons
to .....//Mod/Mesh/Gui/Resources/icons
edit both Mesh.qrc and MeshPart.qrc accordingly
remove referrence to the icon from the command in
the MeshPart Command.cpp file and add it to
the Mesh Command.cpp file
2013-12-14 00:58:58 +11:00
jmaustpc
47ee436e93
Add icons to menus for mesh to shape and shape to mesh
...
Mesh to shape icon for the Part workbench Part menu
Shape to mesh icon for the Mesh design Workbench Meshes menu
2013-12-13 10:29:08 -02:00
WandererFan
8b977debaf
Reinstate use of default font from Draft Preferences
...
Fix handling of mouse events & effect on feature base point
2013-12-13 10:26:19 -02:00
jriegel
0db516028c
small fix in Quantity lexer
2013-12-12 20:20:11 +01:00
wmayer
df53ad49cf
+ For MeshGui remove dependency to MeshPartGui when loading the workbench
2013-12-12 18:19:56 +01:00
wmayer
90af2d5c68
+ Do not limit fillet/chammfer values
2013-12-12 13:20:58 +01:00
jriegel
9efcb3969a
fix user preferred
2013-12-10 23:32:25 +01:00
jriegel
69b4dd0fac
changing ym to um
2013-12-10 23:05:08 +01:00
jriegel
2061c21115
Allow seting of transformation without copy the mesh
2013-12-10 23:05:07 +01:00
wmayer
5f918b3049
+ Increase maximum of visible items in combo box
2013-12-10 10:44:59 +01:00
jriegel
132b75e5ab
Volum for Tet10 FemMesh
2013-12-09 23:52:44 +01:00
jriegel
401cb13035
Switching Quantity parser to UTF8
2013-12-09 23:50:52 +01:00
wmayer
df363e94f3
+ PySide on Windows
2013-12-09 21:58:52 +01:00
wmayer
5e628aedf1
+ fixes #0001327 : Crash in System::initSolution()
2013-12-09 13:41:38 +01:00
wmayer
c86b7e17c8
+ A more reliable workaround for regression in SoQtViewer
2013-12-09 13:40:42 +01:00
wmayer
7e22acb140
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2013-12-09 11:12:12 +01:00
wmayer
2f330674fe
+ Use icons and translated names for Part primitives
2013-12-09 11:11:51 +01:00
jriegel
cfa7045408
Some fixes in unit system
2013-12-08 19:48:13 +01:00
wmayer
b6025019df
+ Allow also int when a float is expected in sketcher constraints
2013-12-08 14:18:50 +01:00
wmayer
017d6e4fb1
+ Workaround for crash in webkit engine for Qt 4.8.5
2013-12-07 22:03:17 +01:00
wmayer
453d81aaae
+ Fix warnings because of invalid frustum with Coin 4.0
2013-12-07 19:22:13 +01:00
wmayer
ac8f69bc08
+ Apply fix of correct use of ShapeFix_Face
2013-12-07 12:54:38 +01:00
jriegel
f53579f671
Starting Calculix integration
2013-12-06 23:26:56 +01:00
jriegel
75216d9d8c
some fixes in quantity
2013-12-06 23:26:42 +01:00
Yorik van Havre
83e63a67b1
Material: packed resources for the editor
2013-12-06 18:32:06 -02:00
wmayer
7ca9728593
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2013-12-06 01:40:10 +01:00
wmayer
54ccc224a6
+ add comments
2013-12-06 01:39:36 +01:00
wmayer
c771c2ed93
+ fixes #0000282 , + fixes #0001028
2013-12-06 01:36:43 +01:00
jriegel
dea9ea82c5
fix semicolon in Init script
2013-12-06 00:13:22 +01:00
jriegel
272e60671b
some fixes and comparison interface for Unit and Quantity python objects
2013-12-06 00:06:58 +01:00
wmayer
01d69071b6
+ Fix gcc build error
2013-12-05 23:30:12 +01:00
wmayer
5ca7d0dcd8
+ Suppress boost warning
2013-12-05 23:08:12 +01:00
wmayer
d62ed23068
+ Fix compiler warnings with OCC 6.6
2013-12-05 23:06:13 +01:00
jriegel
eb5cc8ed6c
Implement the three major unit system schemas
2013-12-05 18:16:31 +01:00
jriegel
b52de075e1
Small clearifikation about the usage of Units interface
2013-12-05 08:54:46 +01:00
jriegel
894529a223
fix error of gcc and remove old parser code.
2013-12-05 08:42:33 +01:00
jriegel
f58ea31b6a
Some fixes in the unit system
2013-12-03 19:57:29 +01:00
jriegel
87c4741fac
new userString methode
2013-12-03 19:03:12 +01:00
jriegel
3a3afa0783
Switching the UnitsApi to the new Quantity system
2013-12-03 19:03:08 +01:00
jriegel
a7e221fdff
deactivate Project view
2013-12-03 18:59:23 +01:00
jriegel
2351d115b9
History and Save managment in InputField
2013-12-03 18:48:18 +01:00
jmaustpc
8a19a176c6
add SVG icons for the Class Browser
...
Created new svg icons to replace the 7 png icons in
src/Gui/Icons/ClassBrowser
and made FreeCAD use them
2013-12-03 10:54:18 +01:00
jriegel
958a14ddbe
fis for fix for spelling....
2013-12-02 21:06:10 +01:00
jriegel
9a239261bb
fix in get visible faces
2013-12-02 20:35:12 +01:00
jriegel
62fc4c3a1e
Fix some spelling
2013-12-02 19:50:51 +01:00
wmayer
1028c365e1
+ Apply Jim's fix of typos
2013-12-02 17:22:30 +01:00
wmayer
ebfe001a7f
+ allow to close download dialog
2013-12-01 16:36:21 +01:00
wmayer
31c5e7055c
+ remove .png extension in spnav dialog
2013-12-01 12:14:25 +01:00
wmayer
1060d40a5f
fixes #0001321 : more visual feedback for check geometry command
2013-12-01 11:57:30 +01:00
wmayer
66f0499a81
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2013-12-01 11:45:21 +01:00
wmayer
1464cf413b
fixes #0001302 : crash in model refine.
2013-12-01 11:44:50 +01:00
jriegel
15ecd1ffe8
Adding Unit definition to the python modul
2013-11-30 21:46:36 +01:00
jriegel
68f3a1fda4
Shifting standard unit definitions
2013-11-30 17:58:24 +01:00
jriegel
ae3c1704c9
Using return to write the logBook in UnitsCalculator
2013-11-30 17:58:23 +01:00
jmaustpc
f2ebb0813e
remove path error from 18 svg icons
...
There was an extra path with no line or fill colour
in these 18 icons. In some svg applications displayed
this as a square in the top righ corner of the icon.
2013-11-30 14:14:34 -02:00
jriegel
b706bf73a5
Add limits to the InputField
2013-11-29 18:24:17 +01:00
jriegel
09fe84abbf
Finish Displacement and animation of it.
2013-11-28 23:30:21 +01:00
jriegel
61e289036e
Starting Displacement post-processing to the FemMesh ViewProvider
2013-11-28 19:52:58 +01:00
jriegel
7a1a8051aa
Adding python capabilities to the Result objects
2013-11-28 19:52:41 +01:00
Yorik van Havre
96514385e5
Arch: Added Draft_PathArray to the Arch WB
2013-11-28 11:55:40 -02:00
Yorik van Havre
4ce8d747b8
Draft: Added Jim's PathArray icon
2013-11-28 11:53:36 -02:00
WandererFan
d652d84c19
Add Draft makePathArray and _PathArray
...
Add Draft PathArray GUI tool
2013-11-28 11:42:14 -02:00
wmayer
a0d2fcd8e2
Ignore plugins by git export
2013-11-28 14:03:32 +01:00
wmayer
f5432d6a08
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2013-11-28 13:33:12 +01:00
wmayer
11d3d51505
+ Webkit based SVG image format
2013-11-28 13:32:32 +01:00
jriegel
feeb053e18
Objects for Results of FEM analysis
2013-11-27 20:14:58 +01:00
wmayer
680f4c82f7
+ Fix FEM install target
2013-11-27 16:26:43 +01:00
wmayer
bbc22b90e1
+ Fallback for meshing dialog if MeshPart fails to load
2013-11-27 15:19:52 +01:00
Yorik van Havre
0506a918b2
Arch: Better view provider for axis object
2013-11-25 16:48:24 -02:00
wmayer
b7a9b774f3
+ Support of export to X3D for meshes
2013-11-25 13:39:31 +01:00
wmayer
cbbf3ee390
Merge branch 'master' of ssh://git.code.sf.net/p/free-cad/code
2013-11-25 10:26:42 +01:00
wmayer
a98c967be4
+ Remove duplicate icon
2013-11-25 10:26:09 +01:00
Yorik van Havre
932647e57f
Draft: Fixed indentation problem in importDXF
2013-11-24 22:13:45 -02:00
Yorik van Havre
816cee5f55
Draft: fixed typo
2013-11-24 18:02:48 -02:00
wmayer
b8eb776179
+ Do not write transient properties of Python feature classes to project file
2013-11-24 17:08:28 +01:00
wmayer
3153ccd8b2
+ Add method load() to Document class in Python
2013-11-22 17:53:31 +01:00
wmayer
ef6978e9df
+Add method to get mdi view by view provider, add method to get flag widgets
2013-11-22 15:14:15 +01:00
wmayer
61bb8ea931
+ Return an emtpy array if something fails inside getPickedPoints()
2013-11-22 10:18:14 +01:00
wmayer
1333cb8734
+ Get exact point on data model when picking in 3d view
2013-11-21 12:50:49 +01:00
wmayer
f5a4c28f3d
+ Expose method getPointOnScreen() to Python
2013-11-20 19:08:09 +01:00
